Adsorption behavior of redox-active suppressor additives: Combined electrochemical and STM studies

The redox chemistry and the related surface phase behavior of Safranine (SAF) and Janus Green B (JGB) have been studied by means of cyclic voltammetry in combination with in situ Scanning Tunneling Microscopy using HOPG (Highly Oriented Pyrolytic Graphite) and single crystalline Cu(1 0 0) as model substrates, both revealing different widths of the accessible potential windows. JGB and SAF serve as prototypical heterocyclic suppressor/leveler additives that are used for the metallization of 3D-TSVs (3D Through Silicon Vias) following a classical "leveling" concept. SAF can be considered as the reductive decomposition product of JGB that is formed at the copper/electrolyte interface upon electroplating. Both additives reveal a pronounced pH-dependent redox-chemistry with redox-transitions lying close to or even beyond the anodic limit of the copper potential window. Affected by these redox-processes are in particular the aromatic cores of those heterocycles that can be (quasi)reversibly reduced by a two electron transfer process within the potential window of copper. Therefore we identify the reduced form of those dyes as the active components for the suppressing/leveling effect in copper plating. STM data clearly shows a dye surface phase behavior that is crucially determined by its potential-dependent redox-chemistry. This will be exemplarily discussed for the SAF dye. On chloride-modified Cu(1 0 0) mono-reduced SAF forms a structurally well-defined monolayer of cationic stacking polymers. However, this coupled anion/cation layer reveals only minor suppressing capabilities with respect to the copper dissolution and deposition processes. Complete reduction of the aromatic heterocycle finally leads to the 3D precipitation of hydrophobic reaction products. 3D clusters of this SAF precipitate are discussed as the active structural motif for the suppressing effect of these dyes. (C) 2011 Elsevier Ltd. All rights reserved.

Fluid balance, glomerular filtration rate, and urine output in dogs anesthetized for an orthopedic surgical procedure

OBJECTIVE: To determine fluid retention, glomerular filtration rate, and urine output in dogs anesthetized for a surgical orthopedic procedure. ANIMALS: 23 dogs treated with a tibial plateau leveling osteotomy. PROCEDURES: 12 dogs were used as a control group. Cardiac output was measured in 5 dogs, and 6 dogs received carprofen for at least 14 days. Dogs received oxymorphone, atropine, propofol, and isoflurane for anesthesia (duration, 4 hours). Urine and blood samples were obtained for analysis every 30 minutes. Lactated Ringer's solution was administered at 10 mL/kg/h. Urine output was measured and glomerular filtration rate was estimated. Fluid retention was measured by use of body weight, fluid balance, and bioimpedance spectroscopy. RESULTS: No difference was found among control, cardiac output, or carprofen groups, so data were combined. Median urine output and glomerular filtration rate were 0.46 mL/kg/h and 1.84 mL/kg/min. Dogs retained a large amount of fluids during anesthesia, as indicated by increased body weight, positive fluid balance, increased total body water volume, and increased extracellular fluid volume. The PCV, total protein concentration, and esophageal temperature decreased in a linear manner. CONCLUSIONS AND CLINICAL RELEVANCE: Dogs anesthetized for a tibial plateau leveling osteotomy retained a large amount of fluids, had low urinary output, and had decreased PCV, total protein concentration, and esophageal temperature. Evaluation of urine output alone in anesthetized dogs may not be an adequate indicator of fluid balance.

Iatrogenic sciatic nerve injury in eighteen dogs and nine cats (1997-2006)

OBJECTIVE: To report clinical features associated with iatrogenic peripheral nerve injury in dogs and cats admitted (1997-2006) to a referral teaching hospital. STUDY DESIGN: Retrospective study. ANIMALS: Dogs (n=18), 9 cats. METHODS: Patients had acute signs of monoparesis attributable to sciatic nerve dysfunction that developed after treatment. Neurologic examination and electrodiagnostic testing were performed. Surgical therapy was used for nerve entrapment and delayed reconstructive surgery used in other cases. RESULTS: Of 27 nerve injuries, 25 resulted from surgery (18 with treatment of pelvic injuries). Iliosacral luxation repair resulted in tibial (4 cats) and peroneal (3 dogs) nerve dysfunction. Other causes were intramedullary pinning of femoral fractures (3), other orthopedic surgery (cemented hip prosthesis [2] and tibial plateau-leveling osteotomy [1]), and perineal herniorrhaphy [1]. Nerve injury occurred after intramuscular injection (1 cat, 1 dog). Immediate surgical treatment was removal of intramedullary nails, extruded cement, or entrapping suture. Delayed nerve transplantation was performed in 2 dogs. Within 1 year, 13 patients recovered completely, clinical improvement occurred in 7, and there was no improvement in 7. Five of the 7 dogs that did not recover had acetabular or ilium fracture. CONCLUSION: Iatrogenic sciatic nerve injury occurred most commonly during treatment of pelvic orthopedic diseases and had a poor prognosis. Clinical variation in sciatic nerve dysfunction in dogs and cats can be explained by species anatomic differences. CLINICAL RELEVANCE: Iatrogenic sciatic nerve injury leads to severely debilitating locomotor dysfunction with an uncertain prognosis for full-functional recovery.

The effects of soil moisture, field-scale toposequential position, and slope on yields in irrigated upland rice fields in Flores, Comayagua, Honduras

Rice (Oryza sativa L.) is an important cash crop in Honduras because of the rice lobby’s size, willingness to protest, and ability to negotiate favorable price guarantees on a year-to-year basis. Despite the availability of inexpensive irrigation in the study area in Flores, La Villa de San Antonio, Comayagua, the rice farmers do not cultivate the crop using prescribed methods such as land leveling, puddling, and water conservation structures. Soil moisture (Volumetric Water Content) was measured using a soil moisture probe after the termination of the first irrigation within the tillering/vegetative, panicle emergence/flowering, post-flowering/pre-maturation and maturation stages. Yield data was obtained by harvesting on 1 m2 plots in each soil moisture testing site. Data was analyzed to find the influence of toposequential position along transects, slope, soil moisture, and farmers on yields. The results showed that toposequential position was more important than slope and soil moisture on yields. Soil moisture was not a significant predictor of rice yields. Irrigation politics, precipitation, and land tenure were proposed as the major explanatory variables for this result.

Konzeption eines proaktiven Risikomanagements in Logistiknetzwerken

Logistiknetzwerke von Unternehmen wachsen sehr schnell und werden immer komplexer. Unternehmen wissen oft nicht, von welchen anderen Unternehmen sie abhängig sind und welche geschäftskritischen Risiken sich daraus für sie ergeben. Aus diesem Grund wird in diesem Artikel ein Konzept eines proaktiven Ri-sikomanagements in Logistiknetzwerken vorgestellt. Das Konzept basiert auf der Big Data Technologie und verwendet zur Identifikation von Risiken und zum Aufbau eines Logistiknetzwerkes neben internen Unternehmensdaten auch externe Daten, z. B. Social Media Plattformen oder andere Datenportale. Diese Daten werden ausgewertet und mit Risiken behaftete Beziehungen werden dem Bediener grafisch angezeigt. Zusätzlich dazu kann das System dem Benutzer mögliche Alternativen zur Vermeidung dieser Risiken aufzeigen und somit zur Entscheidungsunterstützung genutzt werden.

Functional and motor neuronal analysis of defensive siphon responses in {\it Aplysia californica}

One of the central goals of neuroscience research is to determine how networks of neurons control and modify behavior. One of the most influential model systems for this kind of analysis is the siphon and gill withdrawal reflex of the marine mollusc A. californica. In response to tactile stimulation, the siphon displays 3 different responses: (1) a posterior pointing and leveling (flaring) of the siphon in response to tail stimulation (the siphon T response), (2) constriction and anterior pointing to head stimulation (the siphon H response) and (3) constriction and withdrawal between the animal's parapodia (the siphon S response). The siphon S response is pseudoconditioned by a noxious tail stimulus to resemble the siphon T response. Behavioral and combined behavioral/intracellular studies were conducted to determine the motor neuronal control of these behaviors and to search for mechanisms of siphon response transformation following pseudoconditioning. The present studies have found that the flaring component of pseudoconditioned siphon S responses occurs during mantle pumping (MP) triggered by noxious tail stimulation. Siphon stimulation also triggers MP, as recorded in neurons of the Interneuron II pattern generator which commands MP. The 4 LF$\rm\sb{SB}$ siphon motor neurons (SMNs) were found necessary and sufficient for the siphon T response, while SMNs RD$\rm\sb S$ and LD$\rm\sb{S1}$ were found necessary and sufficient for the siphon H response. Following pseudoconditioning, there is an increase in the number of evoked spikes to the test stimulus for the LF$\rm\sb{SB}$ cells and a decreased number for RD$\rm\sb S.$ Siphon flaring occurring during the pseudoconditioned response correlates with increased LF$\rm\sb{SB}$ activity during triggered MP cycles. This suggests that psuedoconditioning is in part due to reconfiguration of the motor outputs of the Interneuron II network. These results suggest that these defensive responses are controlled and patterned by a well-defined, finite set of motor neurons and interneurons (Interneuron II) that are dedicated to specific behavioral functions, but also have parallel distributed properties. ^

Cytokine induction in human mononuclear cells stimulated by IgG-coated culture surfaces and by IgG for infusion

The effect of IgG on cytokine production by human mononuclear cells (MNC) was studied. Tumor necrosis factor-alpha (TNF) was determined both by bioassay and by immunoassay. Interleukin-1 (IL1) was measured by a thymocyte costimulator assay, which was shown to be completely inhibitable by polyclonal anti-IL1. Precautions were taken to avoid inadvertent exposure of the studied cells to endotoxin. In a first model, TNF and IL1 production by adherent MNC in IgG-coated cluster plates were determined. IgG induced a strong TNF response, usually leveling off after 6 hr, and was comparable in kinetics and magnitude with an LPS-induced response. The thymocyte co-stimulatory activity response was relatively weak and peaked at 6 hr. In contrast, LPS-induced co-stimulatory activity production steadily increased over 24 hr. In a second model, MNC in suspension cultures containing autologous serum were exposed to IgG for intravenous use (IgG-IV). Cells exposed to IgG-IV produced higher amounts of cytokines than control counterparts and were primed for enhanced production of cytokines upon a second, unrelated stimulus. This implies that the effect of IgG-IV on suspended MNC resembles that of surface-adsorbed IgG and raises the possibility that cytokine release is an integral part of the mechanism of action of infused IgG. Evidence is presented suggesting that both surface IgG and IgG-IV act directly on monocytes, in a Fc-dependent manner.

Contraceptive attitudes and knowledge of female adolescents

Despite the recent decline in adolescent pregnancy rates, adolescent pregnancy continues to be a significant public health issue in the United States. The United States consistently reports the highest rate of adolescent pregnancy among developed countries. Adolescent mothers are more likely to have multiple pregnancies, to access welfare and other social services, and to be unmarried. Teen mothers are less likely to complete high school, enter college, and typically command much less earning power throughout their lifetime as compared to women who delay childbirth until later. Moreover, the United States spends approximately $9.1 billion annually on teen pregnancies. ^ Additionally disconcerting is recent data which demonstrates that the decline in teen pregnancy rates is leveling off and that the rate of adolescent pregnancy has increased for the first time since 1993. Contraceptive use is a key component to the prevention of adolescent pregnancy. Contraceptive nonuse and failure result in unintended pregnancies among adolescents. This review sought to assess the levels of knowledge and attitudes toward contraception among adolescent females.^ Levels of knowledge of contraception among adolescents are tolerable; however, there is substantial room for improvement. Misperceptions about the side effects and mechanisms of action of contraception are pervasive among this population. Adolescents who have low levels of knowledge regarding contraception tend to discontinue usage or use inconsistently. Attitudes toward contraception are greatly influenced by levels of knowledge. As a result, adolescents tend to develop more positive attitudes as misperceptions are abated. Moreover, clear disparities persist among adolescents with minority and young adolescents being at increased risk of pregnancy, poor contraceptive use, and insufficient knowledge about contraception.^ Understanding the level of knowledge of and attitudes toward contraceptives among adolescents is essential to the development of effective pregnancy prevention programs. In order to effectively reduce adolescent pregnancy, prevention initiatives must target the vulnerable populations and incorporate the necessary cultural components.^

Sistematización de suelos : eficiencia en la ejecución del proyecto en suelos complejos

El manejo sustentable de los recursos naturales relacionados con proyectos de utilización de los recursos hídricos (entre otros), requiere en muchos casos de la modificación del relieve existente. Esto conlleva la necesidad de adecuación de la capa homogénea superior del suelo, operación que suele denominarse "sistematización", la cual facilita una distribución más uniforme de las lluvias y del agua de riego. Esta modificación de la capa superior del suelo es realizada en base a un proyecto, cuya inclinación responda a las pendientes naturales o a las establecidas por el diseñador. En la ejecución del diseño proyectado, en superficies superiores a una hectárea, el movimiento de tierra se realiza con equipos pesados, que no aseguran un alto porcentaje de eficiencia en lo que al movimiento de tierra se refiere, ya que parte del material se pierde en el acarreo, pero muy especialmente, por la compactación desuniforme del mismo, asociada con las texturas complejas del suelo a trabajar. El presente trabajo determinó el índice de precisión en la ejecución del proyecto de sistematización a partir de un índice estadístico internacionalmente aceptado, el "Root Mean Squared Error (RMSE)", comparando los valores altimétricos proyectados y los realmente obtenidos luego de la ejecución del proyecto, en tres parcelas con distinta secuencia de labores y maquinaria utilizadas, pero con el mismo tipo de suelo en el área del eje Pilar - La Plata (Argentina). Los resultados obtenidos, que varían de un RMSE de 4 a 6 cm, permiten concluir, para los sitios y las condiciones estudiadas, que no pueden asegurarse en la sistematización índices de precisión en la ejecución de la obra, inferiores a los 4 cm.

Procedencia escolar de los aspirantes a la Facultad de Ciencias Médicas y su relación con el rendimiento en los exámenes de admisión

La selección de aspirantes para el ingreso a la carrera de Medicina y otras carreras de las Ciencias de la Salud es un tema de constante actualidad tanto en el ámbito nacional como internacional. La Facultad de Ciencias Médicas de la Universidad Nacional de Cuyo tiene un sistema selectivo a través de exámenes de contenidos del nivel de educación secundaria y ofrece un curso de nivelación de un semestre de duración. Se observa que un alto porcentaje de aspirantes no logran compensar la diferencia existente entre los conocimientos que poseen y los que demandan las carreras ofrecidas, únicamente mediante la preparación individual y la preparación que brinda la Facultad. El propósito de este estudio fue el de caracterizar a los aspirantes a las carreras de la Facultad de Ciencias Médicas, de acuerdo a los establecimientos de educación secundaria de procedencia, realizando un estudio retrospectivo de cinco años, sobre la base de datos de aspirantes a las tres carreras de la Facultad, clasificándolos según dicha procedencia y relacionando esa característica con su rendimiento en los exámenes de admisión. La mayoría de los aspirantes a las carreras de la Facultad de Ciencias Médicas proviene de establecimientos oficiales, seguido por establecimientos privados y en tercer lugar por establecimientos dependientes de la Universidad Nacional de Cuyo. El rendimiento en los exámenes de los aspirantes a Enfermería y Tecnicaturas fue independiente a la modalidad de la escuela secundaria. Para ingresar a la carrera de Medicina la modalidad Ciencias Naturales favorece el rendimiento en los exámenes. Del mismo modo, provenir de un colegio de la Universidad o de una escuela privada otorga mayores posibilidades de éxito. La Facultad de Ciencias Médicas realiza esfuerzos constantes, a través de la información sobre los requisitos de admisión y de su oferta de cursos de nivelación para lograr que los aspirantes lleguen con mejor preparación a las instancias de evaluación. Sin embargo, las características relacionadas con la formación previa de los aspirantes deben ser consideradas como factores vinculantes con sus posibilidades de ingresar.

Organic carbon and nitrogen at DSDP Leg 58 Holes

The sediments penetrated on Leg 58 of the Deep Sea Drilling Project in the Philippine Sea represent long periods of geologic time during which depositional conditions apparently remained very constant. Organic carbon and nitrogen contents of the sediments decrease with increasing depth of burial, before leveling off at minimum values of about 0.05 to 0.10 per cent and 0.01 per cent, respectively. The depth at which the minimum values are reached varies from site to site, but ages of sediments corresponding to the minima are all about 5 m.y. We infer that slow bacterial diagenesis is responsible for the gradual depletion of organic carbon and nitrogen. It is likely that the rate of bacterial metabolism is controlled by the rate of diffusion of electron acceptors within the sediments. These results suggest that bacterial ecosystems in deep-water sediments play a much more important role in diagenesis than has previously been thought.

Diseño de un sistema de auscultación de subsidencias mediante técnicas geomáticas

La subsidencia del terreno constituye un riesgo geotécnico capaz de afectar a amplias zonas del territorio. Este fenómeno puede producirse por la consolidación de los suelos finos de un sistema acuífero, disolución y colapso de materiales yesíferos, actuaciones humanes, etc. Muchas regiones del mundo, y gran parte de la geografía peninsular, pueden verse afectadas de manera significativa por este fenómeno. En este proyecto se pretende crear una metodología de trabajo que se pueda aplicar en cualquier ámbito geográfico para el control de las subsidencias. Para la realización de esta metodología se han tomado tres técnicas de auscultación de subsidencias, nivelación geométrica de precisión, nivelación GPS y DinSAR, y comparado sus pros y contras, así como las precisiones esperadas y el organigrama de trabajo. Para que se vea mejor la funcionalidad del sistema, se ha procedido a la implantación teórica del mismo en una localización al Norte de la ciudad de Madrid con un escenario realista. Abstract Subsidence is a geotechnical risk which can affect large countryside areas. This phenomenon may be produced by the consolidation of an aquifer system fine soils, dissolution and collapse of gypsum materials, human actions, etc. Many regions of the world, and much of the Iberian Peninsula, may be significantly affected by this condition. This project aims to create a methodology that can be applied in any geographical area to control subsidence. For this purpose, three subsidence monitoring techniques have been studied. Those are precision geometric leveling, GPS leveling and DInSAR. During the project, pros and cons as well as the precisions expected and work schedule have been studied and compared. The subsidence auscultation system has been theoretically implemented in a location. This location is a realistic stage located north of Madrid

Determinación de un modelo de geoide gravimétrico para Puerto Rico como sistema de referencia para las altitudes ortométricas

El geoide, definido como la superficie equipotencial que mejor se ajusta (en el sentido de los mínimos cuadrados) al nivel medio del mar en una determinada época, es la superficie que utilizamos como referencia para determinar las altitudes ortométricas. Si disponemos de una superficie equipotencial de referencia como dátum altimétrico preciso o geoide local, podemos entonces determinar las altitudes ortométricas de forma eficiente a partir de las altitudes elipsoidales proporcionadas por el Sistema Global de Navegación por Satélite (Global Navigation Satellite System, GNSS ). Como es sabido uno de los problemas no resueltos de la geodesia (quizás el más importante de los mismos en la actualidad) es la carencia de un dátum altimétrico global (Sjoberg, 2011) con las precisiones adecuadas. Al no existir un dátum altimétrico global que nos permita obtener los valores absolutos de la ondulación del geoide con la precisión requerida, es necesario emplear modelos geopotenciales como alternativa. Recientemente fue publicado el modelo EGM2008 en el que ha habido una notable mejoría de sus tres fuentes de datos, por lo que este modelo contiene coeficientes adicionales hasta el grado 2190 y orden 2159 y supone una sustancial mejora en la precisión (Pavlis et al., 2008). Cuando en una región determinada se dispone de valores de gravedad y Modelos Digitales del Terreno (MDT) de calidad, es posible obtener modelos de superficies geopotenciales más precisos y de mayor resolución que los modelos globales. Si bien es cierto que el Servicio Nacional Geodésico de los Estados Unidos de América (National Geodetic Survey, NGS) ha estado desarrollando modelos del geoide para la región de los Estados Unidos de América continentales y todos sus territorios desde la década de los noventa, también es cierto que las zonas de Puerto Rico y las Islas Vírgenes Estadounidenses han quedado un poco rezagadas al momento de poder aplicar y obtener resultados de mayor precisión con estos modelos regionales del geoide. En la actualidad, el modelo geopotencial regional vigente para la zona de Puerto Rico y las Islas Vírgenes Estadounidenses es el GEOID12A (Roman y Weston, 2012). Dada la necesidad y ante la incertidumbre de saber cuál sería el comportamiento de un modelo del geoide desarrollado única y exclusivamente con datos de gravedad locales, nos hemos dado a la tarea de desarrollar un modelo de geoide gravimétrico como sistema de referencia para las altitudes ortométricas. Para desarrollar un modelo del geoide gravimétrico en la isla de Puerto Rico, fue necesario implementar una metodología que nos permitiera analizar y validar los datos de gravedad terrestre existentes. Utilizando validación por altimetría con sistemas de información geográfica y validación matemática por colocación con el programa Gravsoft (Tscherning et al., 1994) en su modalidad en Python (Nielsen et al., 2012), fue posible validar 1673 datos de anomalías aire libre de un total de 1894 observaciones obtenidas de la base de datos del Bureau Gravimétrico Internacional (BGI). El aplicar estas metodologías nos permitió obtener una base de datos anomalías de la gravedad fiable la cual puede ser utilizada para una gran cantidad de aplicaciones en ciencia e ingeniería. Ante la poca densidad de datos de gravedad existentes, fue necesario emplear un método alternativo para densificar los valores de anomalías aire libre existentes. Empleando una metodología propuesta por Jekeli et al. (2009b) se procedió a determinar anomalías aire libre a partir de los datos de un MDT. Estas anomalías fueron ajustadas utilizando las anomalías aire libre validadas y tras aplicar un ajuste de mínimos cuadrados por zonas geográficas, fue posible obtener una malla de datos de anomalías aire libre uniforme a partir de un MDT. Tras realizar las correcciones topográficas, determinar el efecto indirecto de la topografía del terreno y la contribución del modelo geopotencial EGM2008, se obtuvo una malla de anomalías residuales. Estas anomalías residuales fueron utilizadas para determinar el geoide gravimétrico utilizando varias técnicas entre las que se encuentran la aproximación plana de la función de Stokes y las modificaciones al núcleo de Stokes, propuestas por Wong y Gore (1969), Vanicek y Kleusberg (1987) y Featherstone et al. (1998). Ya determinados los distintos modelos del geoide gravimétrico, fue necesario validar los mismos y para eso se utilizaron una serie de estaciones permanentes de la red de nivelación del Datum Vertical de Puerto Rico de 2002 (Puerto Rico Vertical Datum 2002, PRVD02 ), las cuales tenían publicados sus valores de altitud elipsoidal y elevación. Ante la ausencia de altitudes ortométricas en las estaciones permanentes de la red de nivelación, se utilizaron las elevaciones obtenidas a partir de nivelación de primer orden para determinar los valores de la ondulación del geoide geométrico (Roman et al., 2013). Tras establecer un total de 990 líneas base, se realizaron dos análisis para determinar la 'precisión' de los modelos del geoide. En el primer análisis, que consistió en analizar las diferencias entre los incrementos de la ondulación del geoide geométrico y los incrementos de la ondulación del geoide de los distintos modelos (modelos gravimétricos, EGM2008 y GEOID12A) en función de las distancias entre las estaciones de validación, se encontró que el modelo con la modificación del núcleo de Stokes propuesta por Wong y Gore presentó la mejor 'precisión' en un 91,1% de los tramos analizados. En un segundo análisis, en el que se consideraron las 990 líneas base, se determinaron las diferencias entre los incrementos de la ondulación del geoide geométrico y los incrementos de la ondulación del geoide de los distintos modelos (modelos gravimétricos, EGM2008 y GEOID12A), encontrando que el modelo que presenta la mayor 'precisión' también era el geoide con la modificación del núcleo de Stokes propuesta por Wong y Gore. En este análisis, el modelo del geoide gravimétrico de Wong y Gore presento una 'precisión' de 0,027 metros en comparación con la 'precisión' del modelo EGM2008 que fue de 0,031 metros mientras que la 'precisión' del modelo regional GEOID12A fue de 0,057 metros. Finalmente podemos decir que la metodología aquí presentada es una adecuada ya que fue posible obtener un modelo del geoide gravimétrico que presenta una mayor 'precisión' que los modelos geopotenciales disponibles, incluso superando la precisión del modelo geopotencial global EGM2008. ABSTRACT The geoid, defined as the equipotential surface that best fits (in the least squares sense) to the mean sea level at a particular time, is the surface used as a reference to determine the orthometric heights. If we have an equipotential reference surface or a precise local geoid, we can then determine the orthometric heights efficiently from the ellipsoidal heights, provided by the Global Navigation Satellite System (GNSS). One of the most common and important an unsolved problem in geodesy is the lack of a global altimetric datum (Sjoberg, 2011)) with the appropriate precision. In the absence of one which allows us to obtain the absolute values of the geoid undulation with the required precision, it is necessary to use alternative geopotential models. The EGM2008 was recently published, in which there has been a marked improvement of its three data sources, so this model contains additional coefficients of degree up to 2190 and order 2159, and there is a substantial improvement in accuracy (Pavlis et al., 2008). When a given region has gravity values and high quality digital terrain models (DTM), it is possible to obtain more accurate regional geopotential models, with a higher resolution and precision, than global geopotential models. It is true that the National Geodetic Survey of the United States of America (NGS) has been developing geoid models for the region of the continental United States of America and its territories from the nineties, but which is also true is that areas such as Puerto Rico and the U.S. Virgin Islands have lagged behind when to apply and get more accurate results with these regional geopotential models. Right now, the available geopotential model for Puerto Rico and the U.S. Virgin Islands is the GEOID12A (Roman y Weston, 2012). Given this need and given the uncertainty of knowing the behavior of a regional geoid model developed exclusively with data from local gravity, we have taken on the task of developing a gravimetric geoid model to use as a reference system for orthometric heights. To develop a gravimetric geoid model in the island of Puerto Rico, implementing a methodology that allows us to analyze and validate the existing terrestrial gravity data is a must. Using altimetry validation with GIS and mathematical validation by collocation with the Gravsoft suite programs (Tscherning et al., 1994) in its Python version (Nielsen et al., 2012), it was possible to validate 1673 observations with gravity anomalies values out of a total of 1894 observations obtained from the International Bureau Gravimetric (BGI ) database. Applying these methodologies allowed us to obtain a database of reliable gravity anomalies, which can be used for many applications in science and engineering. Given the low density of existing gravity data, it was necessary to employ an alternative method for densifying the existing gravity anomalies set. Employing the methodology proposed by Jekeli et al. (2009b) we proceeded to determine gravity anomaly data from a DTM. These anomalies were adjusted by using the validated free-air gravity anomalies and, after that, applying the best fit in the least-square sense by geographical area, it was possible to obtain a uniform grid of free-air anomalies obtained from a DTM. After applying the topographic corrections, determining the indirect effect of topography and the contribution of the global geopotential model EGM2008, a grid of residual anomalies was obtained. These residual anomalies were used to determine the gravimetric geoid by using various techniques, among which are the planar approximation of the Stokes function and the modifications of the Stokes kernel, proposed by Wong y Gore (1969), Vanicek y Kleusberg (1987) and Featherstone et al. (1998). After determining the different gravimetric geoid models, it was necessary to validate them by using a series of stations of the Puerto Rico Vertical Datum of 2002 (PRVD02) leveling network. These stations had published its values of ellipsoidal height and elevation, and in the absence of orthometric heights, we use the elevations obtained from first - order leveling to determine the geometric geoid undulation (Roman et al., 2013). After determine a total of 990 baselines, two analyzes were performed to determine the ' accuracy ' of the geoid models. The first analysis was to analyze the differences between the increments of the geometric geoid undulation with the increments of the geoid undulation of the different geoid models (gravimetric models, EGM2008 and GEOID12A) in function of the distance between the validation stations. Through this analysis, it was determined that the model with the modified Stokes kernel given by Wong and Gore had the best 'accuracy' in 91,1% for the analyzed baselines. In the second analysis, in which we considered the 990 baselines, we analyze the differences between the increments of the geometric geoid undulation with the increments of the geoid undulation of the different geoid models (gravimetric models, EGM2008 and GEOID12A) finding that the model with the highest 'accuracy' was also the model with modifying Stokes kernel given by Wong and Gore. In this analysis, the Wong and Gore gravimetric geoid model presented an 'accuracy' of 0,027 meters in comparison with the 'accuracy' of global geopotential model EGM2008, which gave us an 'accuracy' of 0,031 meters, while the 'accuracy ' of the GEOID12A regional model was 0,057 meters. Finally we can say that the methodology presented here is adequate as it was possible to obtain a gravimetric geoid model that has a greater 'accuracy' than the geopotential models available, even surpassing the accuracy of global geopotential model EGM2008.

Avaliação Comparativa da Contenção de Molares Superiores Distalizados Realizada por Meio da Placa Lábio-Ativa ou Aparelho Extrabucal

O objetivo deste estudo foi comparar cefalometricamente os efeitos dentários promovidos pelo aparelho extrabucal e com a placa lábio-ativa, instalados para a contenção dos molares superiores distalizados previamente com a placa de Cetlin associada ao aparelho extrabucal. A amostra consistiu de 40 telerradiografias em norma lateral, obtidas de 20 pacientes, sendo 6 do sexo masculino e 14 do sexo feminino, com idade média de 11 anos e 7 meses, tratados por um período médio de 14 meses e 10 dias. Após a distalização, que foi feita com a placa de Cetlin associada ao aparelho extrabucal cérvico-occipital, estes pacientes foram divididos aleatoriamente em dois grupos, onde o grupo AEB utilizou o próprio aparelho extrabucal de uso noturno e o grupo PLA utilizou uma placa lábio-ativa superior em período integral, ambos os aparelhos para conter os primeiros molares superiores distalizados durante a fase de alinhamento e nivelamento dentários. Após a análise estatística, verificou-se que no grupo AEB os molares superiores apresentaram apenas uma inclinação para mesial em média de 8,220 . Já os incisivos superiores inclinaram para lingual, em média, 3,330. No grupo PLA, os molares apresentaram extrusão de, em média, 1,82 mm; mesialização de 3,14 mm; e inclinação para mesial de 8,320; já os incisivos inclinaram para lingual 5,780, em média. Ao comparar os resultados dos grupos entre si, verificou-se que não houve diferença estatisticamente significante entre os aparelhos utilizados. Portanto, tanto o aparelho extrabucal, como a placa lábio-ativa apresentaram-se eficazes para a contenção dos molares superiores distalizados durante as fases de alinhamento e nivelamento dentários.

Avaliação Comparativa da Contenção de Molares Superiores Distalizados Realizada por Meio da Placa Lábio-Ativa ou Aparelho Extrabucal

O objetivo deste estudo foi comparar cefalometricamente os efeitos dentários promovidos pelo aparelho extrabucal e com a placa lábio-ativa, instalados para a contenção dos molares superiores distalizados previamente com a placa de Cetlin associada ao aparelho extrabucal. A amostra consistiu de 40 telerradiografias em norma lateral, obtidas de 20 pacientes, sendo 6 do sexo masculino e 14 do sexo feminino, com idade média de 11 anos e 7 meses, tratados por um período médio de 14 meses e 10 dias. Após a distalização, que foi feita com a placa de Cetlin associada ao aparelho extrabucal cérvico-occipital, estes pacientes foram divididos aleatoriamente em dois grupos, onde o grupo AEB utilizou o próprio aparelho extrabucal de uso noturno e o grupo PLA utilizou uma placa lábio-ativa superior em período integral, ambos os aparelhos para conter os primeiros molares superiores distalizados durante a fase de alinhamento e nivelamento dentários. Após a análise estatística, verificou-se que no grupo AEB os molares superiores apresentaram apenas uma inclinação para mesial em média de 8,220 . Já os incisivos superiores inclinaram para lingual, em média, 3,330. No grupo PLA, os molares apresentaram extrusão de, em média, 1,82 mm; mesialização de 3,14 mm; e inclinação para mesial de 8,320; já os incisivos inclinaram para lingual 5,780, em média. Ao comparar os resultados dos grupos entre si, verificou-se que não houve diferença estatisticamente significante entre os aparelhos utilizados. Portanto, tanto o aparelho extrabucal, como a placa lábio-ativa apresentaram-se eficazes para a contenção dos molares superiores distalizados durante as fases de alinhamento e nivelamento dentários.