Retroperitoneoscopy to extract dropped gallstones after laparoscopic cholecystectomy

Complications resulting from gallstones left in the peritoneal cavity are most often reported after laparoscopic treatment of cholelitiasis. Gallstones are frequently dropped in the posterior subhepatic space, which can lead to the development of abscesses that usually require laparotomy for extraction of the stones. We present a novel technique for treating collections associated with dropped gallstones, using retroperitoneoscopy with two 10-mm ports after ultrasound localization of the abscess. We carried out this procedure in two patients and successfully extracted the gallstones without postoperative complications or recurrences. We consider this approach to be technically feasible, safe, and effective. It avoids the usual inefficacy of simple percutaneous drainage of these collections and the complications associated with the drainage of intra-abdominal abscesses by laparotomy.

Imatinib plasma concentrations variability in oncologic patients

The anticancer drug imatinib has transformed the treatment and prognosis of chronic myeloid leukemia and gastrointestinal stromal tumor. However, the treatment must be taken indefinitely and is not devoid of inconveniences and toxicity. Moreover, resistance or escape from disease control are occurring. Considering the large interindividual differences in the function of the enzymatic and transport systems involved in imatinib disposition, exposure to this drug can be expected to vary widely among patients. This book describes an observational clinical trial aiming at exploring the influence of these covariates on imatinib pharmacokinetics and assessing the interindividual variability of the pharmacokinetic parameters of the drug. A large interindividual variability was observed, together with some preliminary concentration-effect relationships. These elements are arguments to further investigate the potential benefit of a therapeutic drug monitoring program to optimize the use of imatinib in patients. Such results should be especially useful to clinical oncologists or scientists involved in clinical oncology research.

Personality traits and virtual reality performance.

BACKGROUND: Surgeons' personalities have been described as different from those of the general population, but this was based on small descriptive studies limited by the choice of evaluation instrument. Furthermore, although the importance of the human factor in team performance has been recognized, the effect of personality traits on technical performance is unknown. This study aimed to compare surgical residents' personality traits with those of the general population and to evaluate whether an association exists between their personality traits and technical performance using a virtual reality (VR) laparoscopy simulator. METHODS: In this study, 95 participants (54 residents with basic, 29 with intermediate laparoscopic experience, and 12 students) underwent personality assessment using the NEO-Five Factor Inventory and performed five VR tasks of the Lap Mentor? basic tasks module. The residents' personality traits were compared with those of the general population, and the association between VR performance and personality traits was investigated. RESULTS: Surgical residents showed personality traits different from those of the general population, demonstrating lower neuroticism, higher extraversion and conscientiousness, and male residents showed greater openness. In the multivariable analysis, adjusted for gender and surgical experience, none of the personality traits was found to be an independent predictor of technical performance. CONCLUSIONS: Surgical residents present distinct personality traits that differ from those of the general population. These traits were not found to be associated with technical performance in a virtual environment. The traits may, however, play an important role in team performance, which in turn is highly relevant for optimal surgical performance.

Assessment of construct validity of a virtual reality laparoscopy simulator.

BACKGROUND: The aim of this study was to assess whether virtual reality (VR) can discriminate between the skills of novices and intermediate-level laparoscopic surgical trainees (construct validity), and whether the simulator assessment correlates with an expert's evaluation of performance. METHODS: Three hundred and seven (307) participants of the 19th-22nd Davos International Gastrointestinal Surgery Workshops performed the clip-and-cut task on the Xitact LS 500 VR simulator (Xitact S.A., Morges, Switzerland). According to their previous experience in laparoscopic surgery, participants were assigned to the basic course (BC) or the intermediate course (IC). Objective performance parameters recorded by the simulator were compared to the standardized assessment by the course instructors during laparoscopic pelvitrainer and conventional surgery exercises. RESULTS: IC participants performed significantly better on the VR simulator than BC participants for the task completion time as well as the economy of movement of the right instrument, not the left instrument. Participants with maximum scores in the pelvitrainer cholecystectomy task performed the VR trial significantly faster, compared to those who scored less. In the conventional surgery task, a significant difference between those who scored the maximum and those who scored less was found not only for task completion time, but also for economy of movement of the right instrument. CONCLUSIONS: VR simulation provides a valid assessment of psychomotor skills and some basic aspects of spatial skills in laparoscopic surgery. Furthermore, VR allows discrimination between trainees with different levels of experience in laparoscopic surgery establishing construct validity for the Xitact LS 500 clip-and-cut task. Virtual reality may become the gold standard to assess and monitor surgical skills in laparoscopic surgery.

Direct Cost of Reprocessing Cotton-woven Surgical Drapes: a Case Study

OBJECTIVE Identify the direct cost of reprocessing double and single cotton-woven drapes of the surgical LAP package. METHOD A quantitative, exploratory and descriptive case study, performed at a teaching hospital. The direct cost of reprocessing cotton-woven surgical drapes was calculated by multiplying the time spent by professionals involved in reprocessing the unit with the direct cost of labor, adding to the cost of materials. The Brazilian currency (R$) originally used for the calculations was converted to US currency at the rate of US$0.42/R$. RESULTS The average total cost for surgical LAP package was US$9.72, with the predominance being in the cost of materials (US$8.70 or 89.65%). It is noteworthy that the average total cost of materials was mostly impacted by the cost of the cotton-woven drapes (US$7.99 or 91.90%). CONCLUSION The knowledge gained will subsidize discussions about replacing reusable cotton-woven surgical drapes for disposable ones, favoring arguments regarding the advantages and disadvantages of this possibility considering human resources, materials, as well as structural, environmental and financial resources.

Índices predictivos de fibrosis en la detección del hígado graso no alcohólico: utilidad en Atención Primaria.

El hígado graso no alcohólico(HGNA) es una entidad muy prevalente que se asocia con un aumento del riesgo cardiovascular global. Normalmente es asintomática. Los índices serológicos de fibrosis se están investigando para su diagnóstico. Objetivo: analizar la utilidad de los índices HAIR, FLI y LAP para el diagnóstico del HGNA y la concordancia entre ellos. Metodología: estudio descriptivo, poblacional, multicéntrico realizado en Atención Primaria en sujetos sanos de entre 15-85 años. Las prevalencias fueron de HAIR 68,1%, FLI 46,8%, LAP 56%. Concordancia modesta de los índices. Es necesario seguir investigando para encontrar un índice útil para el diagnóstico.

Ilha de santiago (Cabo Verde) - Notas Florísticas e Fitogeográficas

Dez taya (Achyranthes aspera var.pubescens, Andropogon/astigiatus, Anthephora cristata, Cenchrus bgorus, Chamaecrista mimosoides, Commelina d~@sa subsp. d$iia, Forsskaolea viridis, Tephrosia linearis, Tolpis/arinulosa e Stylosanthes humilis) sãom encionadopse lap rimeirav ez paraS antiagoE. stacitacáo constitui também,p ara4 deles,a suap rimeirar eferencia para o arquipélagod e CaboV erde. A ~orrkcia de espéciese ndémicasc,u ja presentan estai lha não era verificada desdeh á longa data, é ylientada. Pelo valor dasc omunidadevse getaisq uen eleso correm, sãor eferidosa lgunslo caisp articti+nente importantes.

Laparoscopic and open colorectal surgery in everyday practice : retrospective study

Résumé Introduction: La plupart des études disponibles sur la chirurgie colorectale par laparoscopie concernent des patients hautement sélectionnés. Le but de cette étude est d'analyser les résultats à court et à long terme de l'ensemble des patients traités dans un service de chirurgie générale. Méthodes: Il s'agit d'une analyse rétrospective d'un registre prospectif interne au service, dans lequel tous les patients consécutifs opérés pour la première fois du colon et du rectum entre mars 1993 et décembre 1997 ont été enregistrés. Les informations concernant le suivi ont été collectées par questionnaire. Résultats: Un total de 187 patients ont été opérés par laparoscopie et 215 patients par chirurgie ouverte durant la période d'étude. Les informations concernant le suivi ont pu être collectées dans 95% des cas avec une évolution de 1-107 mois (médiane 59 mois), respectivement de 1-104 mois (médiane 53 mois). Une conversion fut nécessaire dans 28 cas (15%) mais ceux-ci restent inclus dans le groupe laparoscopie pour l'analyse par intention de traitement. Dans le groupe laparoscopie, les opérations ont duré plus longtemps (205 vs 150 min, p<0.001) mais l'hospitalisation a été plus courte (8 vs 13 jours, p<0.001). La reprise du transit a été plus rapide après laparoscopie, mais uniquement après intervention sur le colon gauche (3 vs 4 jours, p<0.01). Cependant, la sélection préopératoire (nombre plus élevé d'urgences et de patients avec un risque anesthésiologique élevé dans le groupe de la chirurgie ouverte) a été favorable à la laparoscopie. Le taux de complications (global ainsi que pour chaque complication chirurgicale) a été similaire dans les deux groupes, avec un taux global de 20% environ. Conclusions: Malgré une sélection favorable des cas, uniquement très peu d'avantages à la laparoscopie sur la chirurgie ouverte ont pu être observés. Abstract Background: Most studies available on laparoscopic colorectal surgery focus on highly selected patient groups. The aim of the present study was to review short- and long-term outcome of everyday patients treated in a general surgery department. Methods: Retrospective review was carried out of a prospective database of all consecutive patients having undergone primary laparoscopic (LAP) or open colorectal surgery between March 1993 and December 1997. Follow-up data were completed via questionnaire. Results: A total of 187 patients underwent LAP resection and 215 patients underwent open surgery. Follow up was complete in 95% with a median of 59 months (range, 1-107 months) and 53 months (range, 1-104 months), respectively. There were 28 conversions (15%) in the LAP group and these remained in the LAP group in an intention-to-treat analysis. The LAP operations lasted significantly longer for all types of resections (205 vs 150 min, P<0.001) and hospital stay was shorter (8 vs 13 days, P<0.001). Recovery of intestinal function was faster in the LAP group, but only after left-sided procedures (3 vs 4days, P<0.01). However, preoperative patient selection (more emergency operations and patients with higher American Society of Anesthesiologists (ASA) score in the open group) had a major influence on these elements and favours the LAP group. Surprisingly, the overall surgical complication rate (including long-term complications such as wound hernia) was 20% in both groups with rates of individual complications also being comparable in both groups. Conclusion: Despite a patient selection favourable to the laparoscopy group, only little advantage in postoperative outcome could be shown for the minimally invasive over the open approach in the everyday patient.

Laparoscopic inguinal hernia repair with extraperitoneal double-mesh technique.

Totally extraperitoneal laparoscopic hernia repair is an efficient but technically demanding procedure. As mechanisms of hernia recurrence may be related to these technical difficulties, we have modified a previously described double-mesh technique in an effort to simplify the procedure. Extraperitoneal laparoscopic hernia repairs were performed in 82 male and 17 female patients having inguinal, femoral, and recurrent bilateral hernias. A standard propylene mesh measuring 15 x 15 cm was cut into two pieces of 4 x 15 cm and 11 x 15 cm. The smaller mesh was placed over both inguinal rings without splitting. The larger mesh was then inserted over the first mesh and stapled to low-risk zones, reinforcing the large-vessel area and the nerve transition zone. The mean procedure duration was 60 minutes for unilateral and 100 minutes for bilateral hernia repair. Patients were discharged from the hospital within 48 hours. The mean postoperative follow-up was 22 months, with no recurrences, neuralgia, or bleeding complications. Over a 2-year period, this technique was found to be satisfactory without recurrences or significant complications. In our hands, this technique was easier to perform: it allows for a less than perfect positioning of the meshes and avoids most of the stapling to crucial zones.

Caracterização e diversidade genética do capim-elefante e seus híbridos com milheto mediante padrões isoenzimáticos

Foram avaliadas isoenzimaticamente sete cultivares de capim-elefante (Pennisetum purpureum) e seus híbridos com milheto (P. americanum), selecionados pela Empresa Pernambucana de Pesquisa Agropecuária (IPA), visando à identificação de acessos. Foram estudados, em gel de poliacrilamida, os sistemas peroxidase (POX), esterase (EST), glutamato oxalacetato transaminase (GOT), leucina aminopeptidase (LAP), álcool-desidrogenase (ADH) e fosfatase ácida (ACP), em folhas jovens, aos 28 dias após o corte de uniformização. Não foi observada atividade isoenzimática da ADH e observou-se baixa resolução do sistema LAP, os quais não são indicados para caracterização dos germoplasmas. Os padrões de ACP, GOT, POX e EST permitiram conhecer os fenótipos dos 14 acessos estudados. Foram revelados 9, 3, 13 e 19 diferentes padrões de bandas, respectivamente, sendo possível a identificação da coleção de forma rápida e segura utilizando apenas os padrões de esterase.

Field Testing of Integral Abutments, Interim Report, HR-399, 1998

Integral abutment bridges are constructed without an expansion joint in the superstructure of the bridge; therefore, the bridge girders, deck, abutment diaphragms, and abutments are monolithically constructed. The abutment piles in an integral abutment bridge are vertically orientated, and they are embedded into the pile cap. When this type of a bridge experiences thermal expansion or contraction, horizontal displacements are induced at the top of the abutment piles. The flexibility of the abutment piles eliminates the need to provide an expansion joint at the inside face to the abutments: Integral abutment bridge construction has been used in Iowa and other states for many years. This research is evaluating the performance of integral abutment bridges by investigating thermally induced displacements, strains, and temperatures in two Iowa bridges. Each bridge has a skewed alignment, contains five prestressed concrete girders that support a 30-ft wide roadway for three spans, and involves a water crossing. The bridges will be monitored for about two years. For each bridge, an instrumentation package includes measurement devices and hardware and software support systems. The measurement devices are displacement transducers, strain gages, and thermocouples. The hardware and software systems include a data-logger; multiplexers; directline telephone service and computer terminal modem; direct-line electrical power; lap-top computer; and an assortment of computer programs for monitoring, transmitting, and management of the data. Instrumentation has been installed on a bridge located in Guthrie County, and similar instrumentation is currently being installed on a bridge located in Story County. Preliminary test results for the bridge located in Guthrie County have revealed that temperature changes of the bridge deck and girders induce both longitudinal and transverse displacements of the abutments and significant flexural strains in the abutment piles. For an average temperature range of 73° F for the superstructure concrete in the bridge located in Guthrie County, the change in the bridge length was about 1 118 in. and the maximum, strong-axis, flexural-strain range for one of the abutment piles was about 400 micro-strains, which corresponds to a stress range of about 11,600 psi.

Paperinkeräysyhtiön ympäristölupa sekä energiajakeen vastaanoton, haketuksen ja hyötykäytön suunnittelu ja kannattavuuden arviointi

Papinniemi Oy harjoittaa paperiteollisuuskuidun jatkojalostus- ja paperinkeräystoimintaa. Yhteensä raaka-ainetta tulee käsiteltäväksi noin 10 000 t/a. Työn tavoitteena oli uudistaa yhtiön jätelain (1072/1993) 42 §:n mukainen jätelupa hakemalla toiminnalle uusi ympäristönsuojelulain (86/2000)mukainen ympäristölupa. Lupahakemus toimitettiin Kaakkois-Suomen ympäristökeskuksen Lap-peenrannan toimipisteeseen 22.6.2006. Hakemuksen kuulutusajan ja lausuntokierroksen jälkeen ympäristökeskus teki asiasta myönteisen ympäristölupapäätöksen 1.11.2006. Lupapäätöksen kuulu-tusaika on 30 päivää, jonka jälkeen päätös saa lainvoiman, ellei siitä valiteta. Papinniemi Oy:n tulee tehdä hakemus lupamääräysten tarkistamiseksi 30.6.2017 mennessä. Papinniemi Oy aikoo tulevaisuudessa laajentaa toimintaansa energiajakeen vastaanotto- ja kierrä-tyspolttoaineen valmistustoimintaan. Työn toisena tavoitteena oli laatia suunnitelma ja kannatta-vuuslaskelma ko. toiminnan aloittamiseksi. Saatujen tulosten perusteella kierrätyspolttoaineen val-mistus on kannattavaa, mikäli energiajakeen saatavuus Imatran seudulla on vähintään 1700 t/a. Täl-löin yhden kierrätyspolttoainetonnin valmistuskustannus on 90 ¤. Kustannus vastaa edullisimman Imatralla kilpailevaa toimintaa harjoittavan yrityksen energiajakeen vastaanottohintaa. Polttokel-poista jätettä tuottaville yrityksille tehdyn kyselyn perusteella energiajakeen saatavuus Imatran seu-dulla on noin 3000 t/a, jolloin yhden kierrätyspolttoainetonnin valmistuskustannus on 51,49 ¤. Vaikka kierrätyspolttoaineen hinta romahti EU:n jätteenpolttodirektiivin (2000/76/EY) vaatimusten voimaantulon myötä vuoden 2006 alussa, tullee kierrätyspolttoaineen hinta nousemaan lähivuosina takaisin direktiiviä edeltäneelle tasolle (24 ¤/t). Tällöin energiajakeen vastaanottohinta toiminnan kannattavuusrajalla on 27,49 ¤/t. Kierrätyspolttoaineiden käyttöä tulevaisuudessa lisännee muiden polttoaineiden hinnan nousu, meneillään olevakierrätyspolttoaineiden standardisoimistyö, jätteiden hyödyntämisasteen parantamistavoitteet, jätteiden kaatopaikkasijoituskustannusten nousu ja päästö-kaupan vaikutus.

Fatigue Analysis of Welded Cruciform Joints with Cold Laps

Työssä on tutkittu vetojännityskuormituksen alaisena olevien hitsattujen kuormaa kantamattomien X-liitosten hitsin paikallisen geometrian variaation vaikutusta väsymislujuuteen. Muuttujina olivat reunan pyöristyssäde, kylmäjuoksun suuruus ja kylkikulma. Geometristen muuttujien parametrinen riippuvuussuhde on analysoitu usealla elementtimallilla. Väsymistarkastelu on suoritettu käyttämällä lineaaris-elastista murtumismekaniikkaa (LEFM) tasovenymätilassa ja materiaalina terästä. Särönkasvun suunnan ennustamisessaon käytetty maksimipääjännityskriteeriä sekä jännitysintensiteettikertoimet on määritetty J-integraalilla. Särön ydintymisvaihetta ei ole otettu huomioon. Rakenteen on oletettu olevan hitsatussa tilassa ja jännitysheilahdus on kokonaan tehollinen. Särön kasvunopeuden ennustamiseen on käytetty Paris'n lakia. Väsymislujuustulokset on esitetty karakteristisina väsymisluokkina (FAT) ja sovitettu parametriseksi yhtälöksi. Lopuksi väsymisanalyysin ennustamia tuloksia on verrattu saatavilla oleviin väsytystestituloksiin.

Effect of Mechanical and Geometric Mismatching on Fatigue and Damage of Welded Joints

The future of high technology welded constructions will be characterised by higher strength materials and improved weld quality with respect to fatigue resistance. The expected implementation of high quality high strength steel welds will require that more attention be given to the issues of crack initiation and mechanical mismatching. Experiments and finite element analyses were performed within the framework of continuum damage mechanics to investigate the effect of mismatching of welded joints on void nucleation and coalescence during monotonic loading. It was found that the damage of undermatched joints mainly occurred in the sandwich layer and the damageresistance of the joints decreases with the decrease of the sandwich layer width. The damage of over-matched joints mainly occurred in the base metal adjacent to the sandwich layer and the damage resistance of the joints increases with thedecrease of the sandwich layer width. The mechanisms of the initiation of the micro voids/cracks were found to be cracking of the inclusions or the embrittled second phase, and the debonding of the inclusions from the matrix. Experimental fatigue crack growth rate testing showed that the fatigue life of under-matched central crack panel specimens is longer than that of over-matched and even-matched specimens. Further investigation by the elastic-plastic finite element analysis indicated that fatigue crack closure, which originated from the inhomogeneousyielding adjacent to the crack tip, played an important role in the fatigue crack propagation. The applicability of the J integral concept to the mismatched specimens with crack extension under cyclic loading was assessed. The concept of fatigue class used by the International Institute of Welding was introduced in the parametric numerical analysis of several welded joints. The effect of weld geometry and load condition on fatigue strength of ferrite-pearlite steel joints was systematically evaluated based on linear elastic fracture mechanics. Joint types included lap joints, angle joints and butt joints. Various combinations of the tensile and bending loads were considered during the evaluation with the emphasis focused on the existence of both root and toe cracks. For a lap joint with asmall lack-of-penetration, a reasonably large weld leg and smaller flank angle were recommended for engineering practice in order to achieve higher fatigue strength. It was found that the fatigue strength of the angle joint depended strongly on the location and orientation of the preexisting crack-like welding defects, even if the joint was welded with full penetration. It is commonly believed that the double sided butt welds can have significantly higher fatigue strength than that of a single sided welds, but fatigue crack initiation and propagation can originate from the weld root if the welding procedure results in a partial penetration. It is clearly shown that the fatigue strength of the butt joint could be improved remarkably by ensuring full penetration. Nevertheless, increasing the fatigue strength of a butt joint by increasing the size of the weld is an uneconomical alternative.

Robotic-Assisted Surgery Improves the Quality of Total Mesorectal Excision for Rectal Cancer Compared to Laparoscopy: Results of a Case-Controlled Analysis.

BACKGROUND: The use of a robotic surgical system is claimed to allow precise traction and counter-traction, especially in a narrow pelvis. Whether this translates to improvement of the quality of the resected specimen is not yet clear. The aim of the study was to compare the quality of the TME and the short-term oncological outcome between robotic and laparoscopic rectal cancer resections. METHODS: 20 consecutive robotic TME performed in a single institution for rectal cancer (Rob group) were matched 1:2 to 40 laparoscopic resections (Lap group) for gender, body mass index (BMI), and distance from anal verge on rigid proctoscopy. The quality of TME was assessed by 2 blinded and independent pathologists and reported according to international standardized guidelines. RESULTS: Both samples were well matched for gender, BMI (median 25.9 vs. 24.2 kg/m(2), p = 0.24), and level of the tumor (4.1 vs. 4.8 cm, p = 0.20). The quality of the TME was better in the Robotic group (complete TME: 95 vs. 55 %; p = 0.0003, nearly complete TME 5 vs. 37 %; p = 0.04, incomplete TME 0 vs. 8 %, p = 0.09). A trend for lower positive circumferential margin was observed in the Robotic group (10 vs. 25 %, p = 0.1). CONCLUSIONS: These results suggest that robotic-assisted surgery improves the quality of TME for rectal cancer. Whether this translates to better oncological outcome needs to be further investigated.