LED lighting design strategies to enhance window appearance and increase energy savings in daylit office spaces

Vertical windows are the most common and simplest method to introduce daylight to interior spaces of office buildings, while also providing a view and connection to the outside. However, high contrast ratios between windows and surrounding surfaces can cause visual discomfort for occupants and can negatively influence their health and productivity. Consequently, building occupants may try to adapt their working environment through closing blinds and turning on lights in order to improve indoor visual comfort. Such interventions defeat the purpose of daylight harvesting systems and can increase the forecast electric lighting consumption in buildings that include such systems. A simple strategy to prevent these problematic consequences is to reduce the luminance contrasts presented by the window wall by increasing the luminance of areas surrounding the window through the sparing use of energy-efficient supplementary lighting, such light emitting diodes (LEDs). This paper presents the result of a pilot study in typical office in Brisbane, Australia that tests the effectiveness of a supplementary LED lighting system. The study shows an improvement in the appraisal of the visual environment is achieved using the supplementary system, along with up to 88% reductions in luminance contrast at the window wall. Also observed is a 36% reduction in the likelihood of user interventions that would increase energy usage. These results are used as the basis of an annual energy simulation of the test office and indicate that supplementary systems could be used to save energy beyond what is typically realised in side lit office spaces.

An Aboriginal nurse-led working model for success in graduating Indigenous Australian nurses

Australia needs more Indigenous nurses. This is widely recognised in both academic literature and government policy. In 2012, only 0.8 percent of the Australian nursing workforce was Indigenous (AIHW, 2012). In spite of the clear need, there is little discussion about how to successfully recruit, retain and graduate Indigenous nursing students. This paper describes a successful program being implemented at the University of Southern Queensland (USQ). Between 2000 and 2012, USQ graduated 80 Indigenous nurses and midwives, at both undergraduate and postgraduate levels. In this paper, the authors outline the journey they undertook to develop the successful program at USQ: the Indigenous Nursing Support (INS) Model: Helping Hands. They argue that four elements underpin success for Indigenous nursing students: the availability of Indigenous academics, Indigenous health content in the nursing curriculum, Indigenous-specific recruitment materials, and individual mentoring and nurturing of Indigenous students.

Integrating LED lighting design strategies with side daylighting systems to improve interior lighting design of office buildings

A high contrast ratio between windows and surrounding walls may lead to office workers visual discomfort that could negatively affect their satisfaction and productivity. Consequently, occupants may try to adapt their working environment by closing blinds and/ or turning on the lights to enhance indoor visual comfort, which can reduce predicted energy savings. The hypothesis of this study is that reducing luminance contrast ratio on the window wall will improve window appearance which potentially will reduce visual discomfort and decrease workers interventions. Thus, this PhD research proposes a simple strategy to diminish the luminance contrast on the window wall by increasing the luminance of the areas surrounding the windows using supplementary light emitting diode (LED) systems. To test the hypothesis, this investigation will involve three experiments in different office layouts with various window types and orientations in Brisbane, Australia. It will assess user preferences for different luminance patterns in windowed offices featuring flexible, lowpower LED lighting installations that allows multiple lighting design options on the window wall. Detailed luminance and illuminance measures will be used to match quantitative lighting design assessment to user preferences.

Design-driven digital futures: The role of design-led innovation in the creation of online connected communities for new mobility solutions

Online communities have fundamentally changed how humans connected and are now so common they are fundamental to the human experience. As the Internet developed for Web 1.0 to Web 2.0, the functionality of these communities has far exceeded initial expectations. These communities have shifted from simply places to share information to ways to access products and services that bridge the online and offline worlds. This shift has led to the disruption of many industries with the transportation industry being one such sector. Both private transport providers and public transport systems face competition from online communities who are able to link services providers and customers more effectively and innovatively. These types of communities fall under what has been popularised as collaborative consumption or the sharing economy. The aim of this study is to explore the role of Design-led Innovation in the creation of digital futures, specifically online connected communities for successful new mobility solutions. To explore this proposition multiple data collection methods are proposed;Content Analysis, ii) A Comparative Qualitative Study consisting of Qualitative Interviews and Focus Groups / Design Workshops and iii) An Action Research Cycle of Embedded Practice. The multidisciplinary nature of this study grounds this research in a novel position contributing to new knowledge in both the field of design, and also a deeper understanding of the larger fast-growing online community phenomena.

PW376 A pilot study of a post-discharge nurse-led, educational intervention on cardiac self-efficacy and anxiety in post-PCI patients

Introduction Hospitalisation for percutaneous coronary intervention (PCI) is often short, with limited nurse-teaching time and poor information absorption. Currently, patients are discharged home only to wait up to 4-8 weeks to commence a secondary prevention program and visit their cardiologist. This wait is an anxious time for patients and confidence or self-efficacy (SE) to self-manage may be low. Objectives To determine the effects of a nurse-led, educational intervention on participant SE and anxiety in the early post-discharge period. Methods A pilot study was undertaken as a randomised controlled clinical trial. Thirty-three participants were recruited, with n=13 randomised to the intervention group. A face-to-face, nurse-led, educational intervention was undertaken within the first 5-7 days post-discharge. Intervention group participants received standard post-discharge education, physical assessment, with a strong focus on the emotional impact of cardiovascular events and PCI. Early reiteration of post-discharge education was offered, along with health professional support with the aim to increase patients’ SE and to effectively manage their post-discharge health and well being, as well as anxieties. Self-efficacy to return to normal activities was measured to gauge participants’ abilities to manage post-PCI after attending the intervention using the cardiac self-efficacy (CSE) scale. State and trait anxiety was also measured using the State-Trait Anxiety Inventory (STAI) to determine if an increase in SE would influence participant anxiety. Results There were some increases in mean CSE scores in the intervention group participants over time. Areas of increase included return to normal social activities and confidence to change diet. Although reductions were observed in mean state and trait anxiety scores in both groups, an overall larger reduction in intervention group participants was observed over time. Conclusion It is essential that patients are given the education, support, and skills to self-manage in the early post-discharge period so that they have greater SE and are less anxious. This study provides some initial evidence that nurse-led support and education during this period, particularly the first week following PCI, is beneficial and could be trialled using alternate modes of communication to support remote and rural PCI patients and extend to other cardiovascular patients.

Spin it to win it: A comparison of constraints-led versus traditional coaching approaches

This thesis aimed to compare the effects of constraints-led and traditional coaching approaches on young cricket spin bowlers, with a specific research focus on increasing spin rates (i.e., Revolutions per Minute). Participants were 22 spin bowlers from either an Australia state youth squad or an academy in England. Results indicate that adopting a constraints-led approach can benefit younger, inexperienced bowlers, whilst a traditional approach may assist more skilled, older bowlers. The findings are discussed with regards to how they may inform the learning design of training programs by cricket coaches.

Why the Constraints-Led Approach is not teaching games for understanding: A clarification

Background There is some apparent confusion regarding similarities and differences between two popular physical education (PE) pedagogical frameworks, that is, the Constraints-Led Approach (CLA) and Teaching Games for Understanding (TGfU). Purpose Our aim in this commentary is to detail important theoretical and pedagogical concepts that distinguish these approaches, as well as to recognise where commonalities exist. Findings In particular, we note that TGfU had its roots in the 1960s in the absence of a substantial theoretical framework, although several attempts to retrospectively scaffold theories around TGfU have subsequently emerged in the literature. TGfU is a learner-centred approach to PE in which teachers are encouraged to design modified games to develop the learner's understanding of tactical concepts. In contrast, the CLA has arisen more recently from the umbrella of Nonlinear Pedagogy (NLP), emerging from the empirically rich theoretical framework of ecological dynamics. The CLA adopts a ‘learner–environment’ scale of analysis in which practitioners are encouraged to identify and modify interacting constraints (of task, environment and learner) to facilitate the coupling of each learner's perceptual and action systems during learning. The CLA is a broader framework which has been adapted for the design of (re)learning environments in PE, sport and movement therapy. Other key distinctions between the approaches include: the overall goals; the way in which the learner and the learning process are modelled; the use of questioning as a pedagogical tool; the focus on individual differences vs. generic concepts; and how progressions and skill interjections are planned and implemented. Conclusions Despite such distinctions, the two approaches are somewhat harmonious and key similarities include: their holistic perspective of the learner; the proposed role of the teacher and the design characteristics of learning tasks in each. Both TGfU and the CLA have a powerful central focus on the nature of learning activities undertaken by each individual learner. This clarification of TGFU and the CLA is intended to act as a catalyst for more empirical work into the complementarity of these juxtaposed pedagogical approaches to learning design.

A constraint-led approach for PE teachers

The Game Sense coaching approach emphasises the modification of game elements or the development of modified games to achieve learning outcomes. In this article we will introduce the constraints-led approach to learning and demonstrate how the theory can underpin the design of games lessons ensuring that teachers give themselves the best chance of satisfying the skill acquisition and psychological needs of every child in PE.

Peer leader led revision skills workshop – who benefits?

In response to student requests, a peer leader led revision skills workshop was run just prior to a mid-semester exam in pharmacology. This skills workshop was well attended and received by equal percentages of both accelerated and traditional students (who were in their 4th semester at university). This suggests that both accelerated and traditional students can benefit from peer led revision skills workshops.

A randomised controlled clinical trial of a post-discharge, nurse-led educational intervention to reduce anxiety and enhance self-efficacy in percutaneous coronary intervention (PCI) patients within the first week post-discharge: A pilot study

This research investigated the efficacy of a post-discharge nurse-led clinic, for patients who underwent a cardiovascular interventional procedure in Australia. A randomised controlled clinical trial measured the effects of the clinic on patient confidence to self-manage and minimise psychological distress given the strong link between anxiety, depression and coronary heart disease. Hospitalisation for the procedure is short and stressful, and patients may wait up to 7-64 days for post-discharge review. This study provides preliminary quantitative and qualitative evidence that nurse-led clinics undertaken within the first week post-percutaneous coronary intervention may fill a much-needed gap for patients during a potentially vulnerable period.

Decreasing luminance contrast on window walls as well as users’ interventions: Using LED lighting system

Mr Mehdi Amirkhani presented his research and case studies on improved lighting design in commercial spaces through daylight control and innovative lighting placement. This technical meeting was organised by IESANZ Queensland Chapter on April 7, 2016.

Synthesis and luminescence properties of Sm3+ doped CaTiO3 nanophosphor for application in white LED under NUV excitation

CaTiO3:Sm3+ (1-11 mol%) nanophosphors were successfully synthesized by a low temperature solution combustion method LCS]. The structural and morphological properties of the phosphors were studied by using Powder X-ray diffractometer (PXRD), Fourier transform infrared (FTIR), X-ray photo electron spectroscopy (XPS), scanning electron microscope (SEM) and transmission electron microscopy (TEM). TEM studies indicate that the size of the phosphor is similar to 20-35 nm. Photoluminescence (PL) properties of Sm3+ (1-11 mol%) doped CaTiO3 for NUV excitation (407 nm) was studied in order to investigate the possibility of its use in White light emitting diode (WLED) applications. The emission spectra consists of intra 4f transitions of Sm3+, such as (4)G(5/2) -> H-6(5/2) (561 nm), (4)G(5/2) -> H-6(7/2) (601-611 nm), (4)G(5/2) -> H-6(9/2) (648 nm) and (4)G(5/2) -> H-6(11/2) (703 nm) respectively. Further, the emission at 601-611 nm show strong orange-red emission and can be applied to the orange-red emission of phosphor for the application for near ultra violet (NUV) excitation. Thermoluminescence (TL) of the samples irradiated with gamma source in the dose range 100-500 Gy was recorded at a heating rate of 5 degrees C s(-1). Two well resolved glow peaks at 164 degrees C and 214 degrees C along with shouldered peak at 186 degrees C were recorded. TL intensity increases up to 300 Gy and thereafter, it decreases with further increase of dose. The kinetic parameters namely activation energy (E), frequency factor (s) and order of kinetics were estimated and results were discussed in detail. (C) 2014 Elsevier B.V. All rights reserved.

A Novel and Scalable LED Communication System

We describe our novel LED communication infrastructure and demonstrate its scalability across platforms. Our system achieves 50 kilo bits per second on very simple SoCs and scales to megabits bits per second rates on dual processor based mobile phone platforms.

Red-emitting LaOF:Eu3+ phosphors: Synthesis, structure and their Judd-Ofelt analysis for LED applications

In the present study, we have synthesized a series of La1-xEuxOF (0.01 <= x <= 0.09) phosphors by the conventional solid-state reaction route at relatively low temperature (500 degrees C) and shorter duration of 2 h. The compounds were crystallized in the rhombohedral structure with the space group R-3m (No. 166). Upon UV excitation (254 nm), the photoluminescence spectra exhibit characteristic luminescence D-5(0) -> F-7(J) (J= 1, 2, 3, and 4) intra-4f shell Eu3+ ion transitions. An intense red emission peak at 610 nm was observed due to electric dipole (D-5(0) -> F-7(2)) transition. Judd-Ofelt theory was employed to evaluate various radiative parameters such as radiative emission rates, lifetime, branching and asymmetry ratios. CIE color coordinates confirmed the red emission of the phosphors. The luminescent results reveal that LaOF:Eu3+ phosphor can be used as potential candidate for developing red component in white LED applications. (C) 2015 Elsevier Ltd. All rights reserved.