Cost-effectiveness of universal prophylaxis in pregnancy with prior group B streptococci colonization.

OBJECTIVE: To estimate the costs and outcomes of rescreening for group B streptococci (GBS) compared to universal treatment of term women with history of GBS colonization in a previous pregnancy. STUDY DESIGN: A decision analysis model was used to compare costs and outcomes. Total cost included the costs of screening, intrapartum antibiotic prophylaxis (IAP), treatment for maternal anaphylaxis and death, evaluation of well infants whose mothers received IAP, and total costs for treatment of term neonatal early onset GBS sepsis. RESULTS: When compared to screening and treating, universal treatment results in more women treated per GBS case prevented (155 versus 67) and prevents more cases of early onset GBS (1732 versus 1700) and neonatal deaths (52 versus 51) at a lower cost per case prevented ($8,805 versus $12,710). CONCLUSION: Universal treatment of term pregnancies with a history of previous GBS colonization is more cost-effective than the strategy of screening and treating based on positive culture results.

THE DESIGN AND DEVELOPMENT OF A SURVEY INSTRUMENT FOR THE ASSESSMENT OF OCCUPATIONAL STRESS

Using stress and coping as a unifying theoretical concept, a series of five models was developed in order to synthesize the survey questions and to classify information. These models identified the question, listed the research study, described measurements, listed workplace data, and listed industry and national reference data.^ A set of 38 instrument questions was developed within the five coping correlate categories. In addition, a set of 22 stress symptoms was also developed. The study was conducted within two groups, police and professors, on a large university campus. The groups were selected because their occupations were diverse, but they were a part of the same macroenvironment. The premise was that police officers would be more highly stressed than professors.^ Of a total study group of 80, there were 37 respondents. The difference in the mean stress responses was observable between the two groups. Not only were the responses similar within each group, but the stress level of response was also similar within each group. While the response to the survey instrument was good, only 3 respondents answered the stress symptom survey properly. It was determined that none of the 37 respondents believed that they were ill. This perception of being well was also evidenced by the grand mean of the stress scores of 2.76 (3.0 = moderate stress). This also caused fewer independent variables to be entered in the multiple regression model.^ The survey instrument was carefully designed to be universal. Universality is the ability to transcend occupational or regional definitions as applied to stress. It is the ability to measure responses within broad categories such as physiological, emotional, behavioral, social, and cognitive functions without losing the ability to measure the detail within the individual questions, or the relationships between questions and categories.^ Replication is much easier to achieve with standardized categories, questions, and measurement procedures such as those developed for the universal survey instrument. Because the survey instrument is universal it can be used as an analytical device, an assessment device, a basic tool for planning and a follow-up instrument to measure individual response to planned reductions in occupational stress. (Abstract shortened with permission of author.) ^

The human IgG anti-carbohydrate repertoire exhibits a universal architecture and contains specificity for microbial attachment sites.

Despite the paradigm that carbohydrates are T cell-independent antigens, isotype-switched glycan-specific immunoglobulin G (IgG) antibodies and polysaccharide-specific T cells are found in humans. We used a systems-level approach combined with glycan array technology to decipher the repertoire of carbohydrate-specific IgG antibodies in intravenous and subcutaneous immunoglobulin preparations. A strikingly universal architecture of this repertoire with modular organization among different donor populations revealed an association between immunogenicity or tolerance and particular structural features of glycans. Antibodies were identified with specificity not only for microbial antigens but also for a broad spectrum of host glycans that serve as attachment sites for viral and bacterial pathogens and/or exotoxins. Tumor-associated carbohydrate antigens were differentially detected by IgG antibodies, whereas non-IgG2 reactivity was predominantly absent. Our study highlights the power of systems biology approaches to analyze immune responses and reveals potential glycan antigen determinants that are relevant to vaccine design, diagnostic assays, and antibody-based therapies.

A new universal, standardized implant database for product identification: a unique tool for arthroplasty registries.

INTRODUCTION Every joint registry aims to improve patient care by identifying implants that have an inferior performance. For this reason, each registry records the implant name that has been used in the individual patient. In most registries, a paper-based approach has been utilized for this purpose. However, in addition to being time-consuming, this approach does not account for the fact that failure patterns are not necessarily implant specific but can be associated with design features that are used in a number of implants. Therefore, we aimed to develop and evaluate an implant product library that allows both time saving barcode scanning on site in the hospital for the registration of the implant components and a detailed description of implant specifications. MATERIALS AND METHODS A task force consisting of representatives of the German Arthroplasty Registry, industry, and computer specialists agreed on a solution that allows barcode scanning of implant components and that also uses a detailed standardized classification describing arthroplasty components. The manufacturers classified all their components that are sold in Germany according to this classification. The implant database was analyzed regarding the completeness of components by algorithms and real-time data. RESULTS The implant library could be set up successfully. At this point, the implant database includes more than 38,000 items, of which all were classified by the manufacturers according to the predefined scheme. Using patient data from the German Arthroplasty Registry, several errors in the database were detected, all of which were corrected by the respective implant manufacturers. CONCLUSIONS The implant library that was developed for the German Arthroplasty Registry allows not only on-site barcode scanning for the registration of the implant components but also its classification tree allows a sophisticated analysis regarding implant characteristics, regardless of brand or manufacturer. The database is maintained by the implant manufacturers, thereby allowing registries to focus their resources on other areas of research. The database might represent a possible global model, which might encourage harmonization between joint replacement registries enabling comparisons between joint replacement registries.

Influence of Abutment Design on Stiffness, Strength, and Failure of Implant-Supported Monolithic Resin Nano Ceramic (RNC) Crowns

BACKGROUND Recent technical development allows the digital manufacturing of monolithic reconstructions with high-performance materials. For implant-supported crowns, the fixation requires an abutment design onto which the reconstruction can be bonded. PURPOSE The aim of this laboratory investigation was to analyze stiffness, strength, and failure modes of implant-supported, computer-assisted design and computer-aided manufacturing (CAD/CAM)-generated resin nano ceramic (RNC) crowns bonded to three different titanium abutments. MATERIALS AND METHODS Eighteen monolithic RNC crowns were produced and loaded in a universal testing machine under quasi-static condition according to DIN ISO 14801. With regard to the type of titanium abutment, three groups were defined: (1) prefabricated cementable standard; (2) CAD/CAM-constructed individualized; and (3) novel prefabricated bonding base. Stiffness and strength were measured and analyzed statistically with Wilcoxon rank sum test. Sections of the specimens were examined microscopically. RESULTS Stiffness demonstrated high stability for all specimens loaded in the physiological loading range with means and standard deviations of 1,579 ± 120 N/mm (group A), 1,733 ± 89 N/mm (group B), and 1,704 ± 162 N/mm (group C). Mean strength of the novel prefabricated bonding base (group C) was 17% lower than of the two other groups. Plastic deformations were detectable for all implant-abutment crown connections. CONCLUSIONS Monolithic implant crowns made of RNC seem to represent a feasible and stable prosthetic construction under laboratory testing conditions with strength higher than the average occlusal force, independent of the different abutment designs used in this investigation.

Use of universal precautions in the workplace: A comparison of two fire /EMS services

The Health Belief Model (HBM) provided the theoretical framework for examining Universal Precautions (UP) compliance factors by Firefighter, EMTs and Paramedics (prehospital care providers). A convenient sample of prehospital care providers (n = 4000) from two cities (Houston and Washington DC), were surveyed to explore the factors related to their decision to comply with Universal Precautions. Eight hundred and sixty-five useable questionnaires were analyzed. The responders were primarily male (95.7%) eight hundred and twenty-eight and thirty-seven were female, prehospital based (100%), EMTs (60.0%) and paramedics (12.8%) who had a mean 13 years of prehospital care experience. ^ Linear regression was used to evaluate the four hypotheses. The first hypothesis evaluating perceived susceptibility and seriousness with reported UP use was statistically significant (p = < .05). Perceived susceptibility, when considered independently, did not make a significant contribution (t = −4.2852; p = 0.0000) to the stated use of Universal precautions. The hypothesis is not supported as stated. The data indicates the opposite effect. Supported is the premise that as perceived susceptibility and perceived seriousness increase the use of Universal Precautions decreases. Hypothesis two tested perceived benefits with internal and external barriers. Both perceived benefits and internal and external barriers as well as the overall regression were significant (F = 112.6, p = 0.0000). The contribution of internal and external barriers was statistically significant (t = 0.0175; p = 0.0000) and (t = 0.0128; p = 0.0000). Hypothesis three which tested modifying factors, cues to action, select demographic variables, and the main effects of the HBM with self reported UP compliance overall was significant. The variables gender, birth, education, job type, EMS certification, years of service, years of experience providing patient care, Universal Precautions training hours, type of apparatus assigned to and the number of EMS related incidents responded to in a month were found to have a significant contribution to the stated use of Universal Precautions. ^ The additive effects were tested by use of a stepwise regression that assessed the contribution of each of the significant variables. Three variables in the equation were statistically significant. Internal barriers (t = −8.5507; p = 0.0000), external barriers (t = −6.2862; p = 0.000) and job type 2 & 3. Job type two (t = −2.8464; p = 0.0045 is titled Engineer/Operator. Job type three (t = −2.5730; p = 0.0103) is titled captain. The overall regression was significant (F = 24.06; p = 0.000). The Hypothesis is supported in the certain demographic variables do influence the stated use of Universal precautions and that as internal and external barriers are decreased, there is an increase in the stated use of Universal Precautions. ^ In summary, this study demonstrated that internal and external barriers have a significant impact on the stated use of Universal Precautions. Internal barriers are those factors within the individual that require an internal change (i.e., forgetfulness, freedom, perception of the urgency of the patient's needs etc.) and external barriers are things in the environment that can be altered (i.e., equipment design, availability of equipment, ease of use). These two model variables explained 23%–30% of the variance. ^

Provisos for classic linear oscillator design methods. New linear oscillator design based on the NDF/RRT

In this paper, the classic oscillator design methods are reviewed, and their strengths and weaknesses are shown. Provisos for avoiding the misuse of classic methods are also proposed. If the required provisos are satisfied, the solutions provided by the classic methods (oscillator start-up linear approximation) will be correct. The provisos verification needs to use the NDF (Network Determinant Function). The use of the NDF or the most suitable RRT (Return Relation Transponse), which is directly related to the NDF, as a tool to analyze oscillators leads to a new oscillator design method. The RRT is the "true" loop-gain of oscillators. The use of the new method is demonstrated with examples. Finally, a comparison of NDF/RRT results with the HB (Harmonic Balance) simulation and practical implementation measurements prove the universal use of the new methods.

Analysis and design of multirate synchronous sampling schemes for sparse multiband signals

We consider the problem of developing efficient sampling schemes for multiband sparse signals. Previous results on multicoset sampling implementations that lead to universal sampling patterns (which guarantee perfect reconstruction), are based on a set of appropriate interleaved analog to digital converters, all of them operating at the same sampling frequency. In this paper we propose an alternative multirate synchronous implementation of multicoset codes, that is, all the analog to digital converters in the sampling scheme operate at different sampling frequencies, without need of introducing any delay. The interleaving is achieved through the usage of different rates, whose sum is significantly lower than the Nyquist rate of the multiband signal. To obtain universal patterns the sampling matrix is formulated and analyzed. Appropriate choices of the parameters, that is the block length and the sampling rates, are also proposed.

An universal system to de-orbit satellites at end of life

A 3-year Project financed by the European Commission is aimed at developing a universal system to de-orbit satellites at their end of life, as a fundamental contribution to limit the increase of debris in the Space environment. The operational system involves a conductive tapetether left bare to establish anodic contact with the ambient plasma as a giant Langmuir probe. The Project will size the three disparate dimensions of a tape for a selected de-orbit mission and determine scaling laws to allow system design for a general mission. Starting at the second year, mission selection is carried out while developing numerical codes to implement control laws on tether dynamics in/off the orbital plane; performing numerical simulations and plasma chamber measurements on tether-plasma interaction; and completing design of subsystems: electronejecting plasma contactor, power module, interface elements, deployment mechanism, and tether-tape/end-mass. This will be followed by subsystems manufacturing and by currentcollection, free-fall, and hypervelocity impact tests.

Sistema eléctrico y de control de potencia de un tunel aerodinámico = Design of the power distributation and control system for a wind tunnel facility

La utilización de túneles aerodinámicos en ingeniería civil está cada vez más demandada debido al actual desarrollo urbanístico, esto es, la necesidad de edificios cada vez más altos en los que concentrar mayor cantidad de población, puentes y estructuras que faciliten el paso de medios de transporte alternativos, la importancia de los aspectos artísticos en la construcción (además de los funcionales), etc. Son muchos los factores que pueden hacer necesario el ensayo de alguna de esas estructuras en un túnel aerodinámico, y no existe un criterio universal a la hora de decidir si conviene o no hacerlo.

Interpreting the universal phylogenetic tree

The universal phylogenetic tree not only spans all extant life, but its root and earliest branchings represent stages in the evolutionary process before modern cell types had come into being. The evolution of the cell is an interplay between vertically derived and horizontally acquired variation. Primitive cellular entities were necessarily simpler and more modular in design than are modern cells. Consequently, horizontal gene transfer early on was pervasive, dominating the evolutionary dynamic. The root of the universal phylogenetic tree represents the first stage in cellular evolution when the evolving cell became sufficiently integrated and stable to the erosive effects of horizontal gene transfer that true organismal lineages could exist.

Efeitos da mecanização agrícola da cultura da cana-de-açúcar nos processos erosivos: dimensionamento de terraços com base na Equação Universal de Perdas de Solo (EUPS)

A cultura da cana-de-açúcar é a segunda maior movimentação econômica na cadeia do agronegócio no Brasil. Gera riquezas através da fabricação de açúcar, etanol e cogeração de energia elétrica, além de outros subprodutos. Considerada fonte de energia renovável, a cana-de- açúcar a princípio tinha sua imagem associada a impactos negativos principalmente devido as queimadas realizadas nas lavouras para colheita manual. Nos últimos anos, baseado em decretos e no Protocolo Agro-ambiental, essa prática vem sendo abolida. Para se manter e até mesmo aumentar o rendimento das colhedoras nos canaviais, os gestores têm adotado práticas para reduzir os terraços agrícolas, com impacto nos sistemas de conservação de solos. Assim, este trabalho teve como objetivo identificar os impactos ambientais provocados pela mecanização agrícola decorrente do mau manejo e dimensionamento dos mecanismos de conservação do solo. Neste estudo também se realizou uma análise à Equação Universal de Perdas de Solo (EUPS), como ferramenta para o dimensionamento de terraços agrícolas. O estudo foi realizado em uma microbacia hidrográfica, denominada Ribeirão da Bocaina, localizada na UGRHI-13 (Tietê - Jacaré). Foi possível identificar a variabilidade amostral do solo para o dimensionamento conservacionista, gerando curvas de nível com Desníveis Verticais (D.V) desuniformes, contrariando a sistemática atual de terraços que respeita cotas múltiplas ou mesmo dimensionamentos empiristas, segundo o conhecimento local e o histórico recente da área. Algumas sugestões também foram feitas afim de torná-la uma ferramenta ainda mais eficiente, considerando condições particulares à cultura da cana-de-açúcar, tais como a influência da palhada, sulcos de plantio e diversos tipos de terraços como meios de controle à erosão. A metodologia foi satisfatória, no que tange a compreensão pelos meios de correlação entre as práticas conservacionistas e modelos de predição de perda de solo, trazendo luz à ciência na interpretação das ferramentas existentes e as lacunas a serem preenchidas.

The Universal songster: or, Museum of mirth : forming the most complete, extensive, and valuable collection of ancient and modern songs in the English language, with a copious and classified index /

Added engraved title-pages.

Evaluation of universal, indicated, and combined cognitive-behavioral approaches to the prevention of depression among adolescents

A cluster, stratified randomized design was used to evaluate the impact of universal, indicated, and combined universal plus indicated cognitive-behavioral approaches to the prevention of depression among 13- to 15-year-olds initially reporting elevated symptoms of depression. None of the intervention approaches differed significantly from a no-intervention condition or from each other on changes in depressive symptoms, anxiety, externalizing problems, coping skills, and social adjustment. All high-symptom students, irrespective of condition, showed a significant decline in depressive symptoms and improvement in emotional well-being over time although they still demonstrated elevated levels of psychopathology compared with the general population of peers at 12-month follow-up. There were also no significant intervention effects for the universal intervention in comparison with no intervention for the total sample of students in those conditions.

PhotoVoltaic DC-DC module integrated converter for novel cascaded and bypass grid connection topologies - design and optimisation

Grid connected PhotoVoltaic (PV) inverters fall into three broad categories — Central, String and Module Integrated Converers (MICs). MICs offer any avantaes in performance and flexibility, but are at a cost disadvantage. Two alternative novel approaches proposed by the author — cascaded dc-dc MICs and bypass dc-dc MICs — integrate a simple non-isolated intelligent dc-dc converter with each PV module to provide the advantages of dc-ac MICs at a lower cost. A suitable universal 150W 5A dc-dc converter design is presented based on two interleaved MOSFET half bridges. Testing shows Zero Voltage Switching (ZVS) keeps losses under 1W for bi-directional power flows up to 15W between two adjacent 12V PV modules for the bypass application, and efficiencies over 94% for most of the operational power range for the cascaded converter application. Based on the experimental results, potential optimizations to further reduce losses are discussed.