Design and testing of an armature-reaction-compensated permanent magnet synchronous generator for island operation

At present, permanent magnet synchronous generators (PMSGs) are of great interest. Since they do not have electrical excitation losses, the highly efficient, lightweight and compact PMSGs equipped with damper windings work perfectly when connected to a network. However, in island operation, the generator (or parallel generators) alone is responsible for the building up of the network and maintaining its voltage and reactive power level. Thus, in island operation, a PMSG faces very tight constraints, which are difficult to meet, because the flux produced by the permanent magnets (PMs) is constant and the voltage of the generator cannot be controlled. Traditional electrically excited synchronous generators (EESGs) can easily meet these constraints, because the field winding current is controllable. The main drawback of the conventional EESG is the relatively high excitation loss. This doctoral thesis presents a study of an alternative solution termed as a hybrid excitation synchronous generator (HESG). HESGs are a special class of electrical machines, where the total rotor current linkage is produced by the simultaneous action of two different excitation sources: the electrical and permanent magnet (PM) excitation. An overview of the existing HESGs is given. Several HESGs are introduced and compared with the conventional EESG from technical and economic points of view. In the study, the armature-reaction-compensated permanent magnet synchronous generator with alternated current linkages (ARC-PMSG with ACL) showed a better performance than the other options. Therefore, this machine type is studied in more detail. An electromagnetic design and a thermal analysis are presented. To verify the operation principle and the electromagnetic design, a down-sized prototype of 69 kVA apparent power was built. The experimental results are demonstrated and compared with the predicted ones. A prerequisite for an ARC-PMSG with ACL is an even number of pole pairs (p = 2, 4, 6, …) in the machine. Naturally, the HESG technology is not limited to even-pole-pair machines. However, the analysis of machines with p = 3, 5, 7, … becomes more complicated, especially if analytical tools are used, and is outside the scope of this thesis. The contribution of this study is to propose a solution where an ARC-PMSG replaces an EESG in electrical power generation while meeting all the requirements set for generators given for instance by ship classification societies, particularly as regards island operation. The maximum power level when applying the technology studied here is mainly limited by the economy of the machine. The larger the machine is, the smaller is the efficiency benefit. However, it seems that machines up to ten megawatts of power could benefit from the technology. However, in low-power applications, for instance in the 500 kW range, the efficiency increase can be significant.

Design and validation of stateful composite RESTful web services

A web service is a software system that provides a machine-processable interface to the other machines over the network using different Internet protocols. They are being increasingly used in the industry in order to automate different tasks and offer services to a wider audience. The REST architectural style aims at producing scalable and extensible web services using technologies that play well with the existing tools and infrastructure of the web. It provides a uniform set of operation that can be used to invoke a CRUD interface (create, retrieve, update and delete) of a web service. The stateless behavior of the service interface requires that every request to a resource is independent of the previous ones facilitating scalability. Automated systems, e.g., hotel reservation systems, provide advanced scenarios for stateful services that require a certain sequence of requests that must be followed in order to fulfill the service goals. Designing and developing such services for advanced scenarios with REST constraints require rigorous approaches that are capable of creating web services that can be trusted for their behavior. Systems that can be trusted for their behavior can be termed as dependable systems. This thesis presents an integrated design, analysis and validation approach that facilitates the service developer to create dependable and stateful REST web services. The main contribution of this thesis is that we provide a novel model-driven methodology to design behavioral REST web service interfaces and their compositions. The behavioral interfaces provide information on what methods can be invoked on a service and the pre- and post-conditions of these methods. The methodology uses Unified Modeling Language (UML), as the modeling language, which has a wide user base and has mature tools that are continuously evolving. We have used UML class diagram and UML state machine diagram with additional design constraints to provide resource and behavioral models, respectively, for designing REST web service interfaces. These service design models serve as a specification document and the information presented in them have manifold applications. The service design models also contain information about the time and domain requirements of the service that can help in requirement traceability which is an important part of our approach. Requirement traceability helps in capturing faults in the design models and other elements of software development environment by tracing back and forth the unfulfilled requirements of the service. The information about service actors is also included in the design models which is required for authenticating the service requests by authorized actors since not all types of users have access to all the resources. In addition, following our design approach, the service developer can ensure that the designed web service interfaces will be REST compliant. The second contribution of this thesis is consistency analysis of the behavioral REST interfaces. To overcome the inconsistency problem and design errors in our service models, we have used semantic technologies. The REST interfaces are represented in web ontology language, OWL2, that can be part of the semantic web. These interfaces are used with OWL 2 reasoners to check unsatisfiable concepts which result in implementations that fail. This work is fully automated thanks to the implemented translation tool and the existing OWL 2 reasoners. The third contribution of this thesis is the verification and validation of REST web services. We have used model checking techniques with UPPAAL model checker for this purpose. The timed automata of UML based service design models are generated with our transformation tool that are verified for their basic characteristics like deadlock freedom, liveness, reachability and safety. The implementation of a web service is tested using a black-box testing approach. Test cases are generated from the UPPAAL timed automata and using the online testing tool, UPPAAL TRON, the service implementation is validated at runtime against its specifications. Requirement traceability is also addressed in our validation approach with which we can see what service goals are met and trace back the unfulfilled service goals to detect the faults in the design models. A final contribution of the thesis is an implementation of behavioral REST interfaces and service monitors from the service design models. The partial code generation tool creates code skeletons of REST web services with method pre and post-conditions. The preconditions of methods constrain the user to invoke the stateful REST service under the right conditions and the post condition constraint the service developer to implement the right functionality. The details of the methods can be manually inserted by the developer as required. We do not target complete automation because we focus only on the interface aspects of the web service. The applicability of the approach is demonstrated with a pedagogical example of a hotel room booking service and a relatively complex worked example of holiday booking service taken from the industrial context. The former example presents a simple explanation of the approach and the later worked example shows how stateful and timed web services offering complex scenarios and involving other web services can be constructed using our approach.

The improvement of enclosure protection class of power electronics device

Tässä diplomityössä tutkittiin vaihtoehtoja tehoelektroniikkalaitteiden kotelointiluokan kehittämiseksi. Haasteena paremman suojauksen suunnittelussa on laitteiden tuottama suuri määrä lämpöä, joka vaatii tehokkaan jäähdytyksen. Työn tuloksena saatu prototyyppi IP33 luokkaa varten täyttää standardissa SFS-EN 60529+A1 asetetut vaatimukset kyseiselle kotelointiluokalle. Rakenteessa ja valmistettavuudessa havaittiin muutama ongelma, jotka ovat korjattavissa pienillä muutoksilla. Korkeampia suojausluokkia varten testattiin IP54-luokiteltujen filtterituulettimien vaikutusta laitteen jäähdytykseen. Testien perusteella jäähdytysteho on riittävä ja filtterituulettimet todettiin toimivaksi ratkaisuksi korkeammille suojausluokille. Työn perusteella voidaan todeta, että nykyiset laitteet voidaan muokata vastaamaan IP33 luokan vaatimuksia kohtuullisen pienillä muutoksilla. Tätä korkeammat suojausluokat vaatisivat niin suuria muutoksia designiin, että todennäköisesti täysin uuden laitteen suunnittelu olis kannattavin vaihtoehto.

Making home rules for mother tongues : the legal implications of linguistic diversity in the design of autonomy regimes

Principen om nationalismen där det politiska och det nationella är samspelt kan vara av markant betydelse för uppbyggande av autonomiska regimer. Likaså tillåter decentralicering och delegering av befogenheter för språk och utbildning (officiellt erkännande av språk, standardisering av språk, undervisningsspråk och relaterade läroplaner) formning av identiteter inom dessa autonomiska regimer. Resultatet är en ofullkomlig cirkulär relation där språk, samfund och politiska institutioner ömsesidigt och kontinuerligt formar varandra: lingvistiskt mångfald prägar och formger autonomiska ordningar och vice-versa. De juridiska implikationerna av territoriella och icke-territoriella former av autonomi är dock av en annan art. Emedan territoriell autonomi bygger på idéen om ett eventuellt inkluderande hemland för lingvistiska grupper, vars vistelseort är avgörande, förstärker den icke-territoriella autonomin idéen om ett exclusivt samfund bestående av själv-identifierade medlemmar som är kapabla till självstyre oavsett territoriella gränser. Denna avhandling utgör an analys av sådana juridiska implikationer genom komparativa och institutionella analyser. Avhandlingen föreslår som resultat en serie av normativa och pragmatiska rekommendationer inriktade på att främja demokratiseringsprocesser i linje med principer om multikulturalism.

Analysis and guidelines for implementation of EN 1090-2 Standard to assist execution class assignment of steel structures

Finnish design and consulting companies are delivering robust and cost-efficient steel structures solutions to a large number of manufacturing companies worldwide. Recently introduced EN 1090-2 standard obliges these companies to specify the execution class of steel structures for their customers. This however, requires clarifying, understanding and interpreting the sophisticated procedure of execution class assignment. The objective of this research is to provide a clear explanation and guidance through the process of execution class assignment for a given steel structure and to support the implementation of EN 1090-2 standard in Rejlers Oy, one of Finnish design and consulting companies. This objective is accomplished by creating a guideline for designers that elaborates on the four-step process of the execution class assignment for a steel structure or its part. Steps one to three define the consequence class (projected consequences of structure failure), the service category (hazards associated with the service use exploitation of steel structure) and the production category (manufacturing process peculiarities), based on the ductility class (capacity of structure to withstand deformations) and the behaviour factor (corresponds to structure seismic behaviour). The final step is the execution class assignment taking into account results of previous steps. Main research method is indepth literature review of European standards family for steel structures. Other research approach is a series of interviews of Rejlers Oy representatives and its clients, results of which have been used to evaluate the level of EN 1090-2 awareness. Rejlers Oy will use the developed novel coherent standard implementation guideline to improve its services and to obtain greater customer satisfaction.

Exploring the impact of celebrity endorsement and product class involvement on advertising effectiveness: an eye tracking approach

Celebrity endorsement has increased in popularity over the past decades and companies are willing to spend increasingly excessive amounts of money into it. Even though multiple studies support celebrity endorsement, further research on its impact on advertising effectiveness is called for. Fur-ther, the role of consumers’ product class involvement in advertising needs to be further studied. The purpose of this study is to explore if consumers’ product class involvement and exposure to celebrity endorsers affect consumers brand recall. Supported by earlier studies, brand recall was used as a measure for advertising effectiveness in this study. In general, a psychological approach was chosen for building the theoretical framework. Concept of classical conditioning was presented in order to understand why people act how they do. Balanced theory and meaning transfer model were presented in order to study how celebrities can be used effectively in advertising context. Further, the importance of product class involvement in advertising effectiveness was evaluated. Hypotheses were formulated based on a literature review of the existing research. Because of the versatility of the research design, a mixed methods approach for this study was adopted. Empirical part of the study was conducted in three stages. First, a pre-test was conducted in order to choose suitable product endorsers for the advertisement stimuli used in the experiment. Second, an eye-tracking experiment with 30 test subjects was conducted in order to study how people view advertisements and whether the familiarity of the product endorser and consumers’ product class involvement affects brand recall. For the experiment, a fictional brand was created in order to avoid bias on brand recall. Third, qualitative interviews for 15 test subjects were conducted in the post-experiment stage in order to gain deeper understating of the phenomenon and to make sense of the findings from the experiment. Findings from this study support celebrity endorsement by suggesting that a famous spokesperson does not steal attention from brand information more than a non-celebrity product endorser. As a result, the use of a celebrity endorser did not decrease brand recall. Results support earlier research as consumer’ higher product class involvement resulted in a better brand recall. Findings from the interviews suggest that consumers have positive perceptions of celebrity endorsement in general. However, the celebrity–brand congruence is a crucial factor when creating attitudes towards the advertisement. Future research ideas were presented based on the limitations and results of this study

The design, synthesis and characterization of new building blocks for the preparation of molecule-based magnetic materials /

Two new families of building blocks have been prepared and fully characterized and their coordination chemistry exploited for the preparation of molecule-based magnetic materials. The first class of compounds were prepared by exploiting the chemistry of 3,3'-diamino-2,2'-bipyridine together with 2-pyridine carbonyl chloride or 2-pyridine aldehyde. Two new ligands, 2,2'-bipyridine-3,3'-[2-pyridinecarboxamide] (Li, 2.3) and N'-6/s(2-pyridylmethyl) [2,2'bipyridine]-3,3'-diimine (L2, 2.7), were prepared and characterized. For ligand L4, two copper(II) coordination compounds were isolated with stoichiometrics [Cu2(Li)(hfac)2] (2.4) and [Cu(Li)Cl2] (2.5). The molecular structures of both complexes were determined by X-ray crystallography. In both complexes the ligand is in the dianionic form and coordinates the divalent Cu(II) ions via one amido and two pyridine nitrogen donor atoms. In (2.4), the coordination geometry around both Cu11 ions is best described as distorted trigonal bipyramidal where the remaining two coordination sites are satisfied by hfac counterions. In (2.5), both Cu(II) ions adopt a (4+1) distorted square pyramidal geometry. One copper forms a longer apical bond to an adjacent carbonyl oxygen atom, whereas the second copper is chelated to a neighboring Cu-Cl chloride ion to afford chloride bridged linear [Cu2(Li)Cl2]2 tetramers that run along the c-axis of the unit cell. The magnetic susceptibility data for (2.4) reveal the occurrence of weak antiferromagnetic interactions between the copper(II) ions. In contrast, variable temperature magnetic susceptibility measurements for (2.5) reveal more complex magnetic properties with the presence of ferromagnetic exchange between the central dimeric pair of copper atoms and weak antiferromagnetic exchange between the outer pairs of copper atoms. The Schiff-base bis-imine ligand (L2, 2.7) was found to be highly reactive; single crystals grown from dry methanol afforded compound (2.14) for which two methanol molecules had added across the imine double bond. The susceptibility of this ligand to nucleophilic attack at its imine functionality assisted via chelation to Lewis acidic metal ions adds an interesting dimension to its coordination chemistry. In this respect, a Co(II) quaterpyridine-type complex was prepared via a one-pot transformation of ligand L2 in the presence of a Lewis acidic metal salt. The rearranged complex was characterized by X-ray crystallography and a reaction mechanism for its formation has been proposed. Three additional rearranged complexes (2.13), (2.17) and (2.19) were also isolated when ligand (L2, 2.7) was reacted with transition metal ions. The molecular structures of all three complexes have been determined by X-ray crystallography. The second class of compounds that are reported in this thesis, are the two diacetyl pyridine derivatives, 4-pyridyl-2,6-diacetylpyridine (5.5) and 2,2'-6,6'-tetraacetyl-4,4'-bipyridine (5.15). Both of these compounds have been designed as intermediates for the metal templated assembly of a Schiff-base N3O2 macrocycle. From compound (5.15), a covalently tethered dimeric Mn(II) macrocyclic compound of general formula {[Mn^C^XJCl-FkO^Cl-lO.SFbO (5.16) was prepared and characterized. The X-ray analysis of (5.16) reveals that the two manganese ions assume a pentagonal-bipyramidal geometry with the macrocycle occupying the pentagonal plane and the axial positions being filled by a halide ion and a H2O molecule. Magnetic susceptibility data reveal the occurrence of antiferromagnetic interactions between covalently tethered Mn(II)-Mn(II) dimeric units. Following this methodology a Co(II) analogue (5.17) has also been prepared which is isostructural with (5.16).

The evaluation of a predialysis class on client knowledge and attitude toward compliant behaviours

In this quasi-experimental study, the theory of reasoned action was used as a conceptual framework to assess the outcome effect of a predialysis class. A pretest, posttest design was used to determine changes in client knowledge about their condition and its treatment, and their intention, attitudes and social norm towards compliant behaviours. The related compliant behaviours were following a low-salt diet and taking medications as proscribed. Thirty-eight End Stage Renal Diseases (ESRD) clients were self-selected into the treatment or control groups. Both groups received the standard predialysis education from members of the multidisciplinary renal team. In addition, the treatment group also attended the predialysis class. Subjects' health locus of control, anxiety and demographic variables were measured as possible extraneous variables. Study subjects from both groups demonstrated a high internal and powerful others health locus of control and a normal range of anxiety. Although not statistically significant ill = .64), the experimental group demonstrated higher knowledge level and greater intention to follow a low salt diet UL= .73). They developed more significantly positive attitudes towards following a low salt diet and increased subjective norm influence after attending the predialysis class. Attending the predialysis class did not have an effect on subjects' intentions, attitudes or subjective norm towards taking medications as prescribed. Conclusion: The predialysis class was only marginally effective in increasing client knowledge, but influenced clients' attitudes towards following a low-salt diet. Based on the results, recommendations for improvements to the class have been suggested.

Miss-understand-ing: design education in Ontario secondary schools : an exploration of the issues with stakeholders and recommendations for change /

For most people design is a mystery. The products of design are integrated into our daily lives to the point that design has become invisible to us. However. what is subsumed in design practice is a creative problem-solving process that is applicable as a teaching strategy as well as a method for teaching the subject of design. The purpose of this study was to inquire into the current classroom practice of Ontario Visual Arts and Technological Education teachers, understand the goals of Ontario government curriculum developers, and explore the position held by the professional design community on secondary school design education. Data for this study were collected from: (a) a textual analysis of 4 Ministry curriculum documents; (b) interviews with JO stakeholders; (c) unobtrusive observations and informal conversations conducted at 7 secondary school open house events; and (d) observation of 2 sessions of an AQ course for Design and Technology. The research design modeled the design process and was divided into 2 parts: a discovery or problem-finding phase and a discussion or problem-solving phase. The results showed that design is misunderstood and misused; it has become lost between visual arts and technology where neither program holds responsibility for its delivery; students mistake working on computers for design practice; and while there is a desire within the professional community to have a voice in secondary school design education. there is no forum for participation. The technology-driven paradigm shift taking place in society today calls for a new framework for tellching and practicing dcsign. Further research is required; howcvcr. in the meantime. secondary school educators might benefit from professional development and classroom support from the professional dcsign community.

Evaluation of a professional development curriculum in movement education and adapted physical activity for invisible disabilities : a critical cross-case analysis

Movement education and adapted physical activity are content areas not addressed in pre-service education or in-service training for Ontario practitioners working with individuals with disabilities in physical environments. Consequently, physical activity is often overlooked by service providers in programming and intervention for exceptional young learners. A formative evaluation, multiple-case study design was employed in this research in which a purposeful sample of expert practitioners performed a guided, descriptive evaluation of a three-day professional development workshop curriculum designed to supplement these areas lacking in professional preparation within their respective cohorts. Case-by-case and comparative analyses illustrated the inherent assumptions and societal constraints which prioritize the structure of professional development within the education system and other government organizations providing services for school-aged persons with disabilities in Ontario. Findings, discussed from a critical postmodern perspective, illustrate the paradoxical nature of Western values and prevailing mind/body dichotomy that guide professional practice in these fields.

Introduction to engineering : a case study of an interdisciplinary course in Mathematics, Science and Technology

This thesis research was a qualitative case study of a single class of Interdisciplinary Studies: Introduction to Engineering taught in a secondary school. The study endeavoured to explore students' experiences in and perceptions of the course, and to investigate the viability of engineering as an interdisciplinary theme at the secondary school level. Data were collected in the form of student questionnaires, the researcher's observations and reflections, and artefacts representative of students' work. Data analysis was performed by coding textual data and classifying text segments into common themes. The themes that emerged from the data were aligned with facets of interdisciplinary study, including making connections, project-based learning, and student engagement and affective outcomes. The findings of the study showed that students were positive about their experiences in the course, and enjoyed its project-driven nature. Content from mathematics, physics, and technological design was easily integrated under the umbrella of engineering. Students felt that the opportunity to develop problem solving and teamwork skills were two of the most important aspects of the course and could be relevant not only for engineering, but for other disciplines or their day-to-day lives after secondary school. The study concluded that engineering education in secondary school can be a worthwhile experience for a variety of students and not just those intending postsecondary study in engineering. This has implications for the inclusion of engineering in the secondary school curriculum and can inform the practice of curriculum planners at the school, school board, and provincial levels. Suggested directions for further research include classroom-based action research in the areas of technological education, engineering education in secondary school, and interdisciplinary education.

Warren Hartman fonds, 1970, 1972-1996, 1998, n.d.

Warren Hartman was born in 1942 in Toronto, Ontario. He received a B.A. in Fine Arts and Drama from Brock University in 1981 and a Masters of Arts in Humanities at the State University of New York at Buffalo in 1987. In the 1950s he did considerable work as a child-actor both in theatre and television. From 1953 to 1961 he was in the New Play Society under the direction of Dora Mavor Moore. His last two years there were spent as a scholarship student. From 1963 to 1966 he did an apprenticeship with Suzanne Mess, Head of Costume Design at The Canadian Opera Company in Toronto. In 1976 Warren attended a Master Class in Scenography at the Banff School of Fine Arts with Josef Svoboda. In the spring of 1970 Warren was a guest designer at Brock University and from 1970 to 1972 he remained at Brock as resident designer and special lecturer. During this time he was also an instructor and costume designer at Sheridan College in Oakville. It was in 1972 that he became the designer-in-residence at Brock University. From 1984 he held the position of Associate Professor at The Department of Fine Arts at Brock University until the fall of 1996. Some of the highlights of Warren’s career also include: stage managager with the Street Hat Players in Port Carling, Ontario, 1960-1961; a freelance designer for over 100 shows; costume coordinator(production manager) for the Canadian Opera Company, 1964 -1970; resident costume designer for The Canadian Opera Company, 1965- 1970; founder and artistic director of Dei Gelosi Campagnia, St.Catharines, Ontario, 1970-1973; freelance director of some thirty-five shows; co-producer for Quebec City Summer Stock Company, Quebec City, Quebec, 1975; a consultant with Alberta Culture for the Provincial Government of Alberta, 1986-1987 and associate artistic director at Theatre Network, Edmonton, Alberta, 1986-1987. Warren Hartman was the recipient of the Jean Chalmers Award for contributions to Canadian Theatre for persons 25 years of age or under, in 1965. He was a founding member of Associated Designers of Canada and was affiliated with Canadian Actors Equity. Warren Hartman died on Feb. 11, 1998 several days after suffering a massive stroke. A memorial service was held at Brock University in May of 1998 and a bursary fund was established in his name.

Beyond the Veil: A Case Study of Context, Culture, Curriculum, and Constructivism at Dubai Women's College

This case study of curriculum at Dubai Women's College (DWC) examines perceptions of international educators who designed and implemented curriculum for female Emirati higher-educational students in the UAE, and sheds light on the complex social, cultural, and religious factors affecting educational practice. Participants were faculty and supervisors, mainly foreign nationals, while students at DWC are exclusively Emirati. Theories prominent in this study are: constructivist learning theory, trans formative curriculum theory, and sociological theory. Change and empowerment theory figure prominently in this study. Findings reveal this unique group of educators understand curriculum theory as a "contextualized" construct and argue that theory and practice must be viewed through an international lens of religious, cultural, and social contexts. As well, the study explores how mandated "standards" in education-in the form of the International English Language Testing System (IEL TS) and integrated, constructivist curriculum, as taught in the Higher Diploma Year 1 program-function as dual curricular emphases in this context. The study found that tensions among these dual emphases existed and were mediated through specific strategies, including the use of authentic texts to mirror the IEL TS examination during in-class activities, and the relevance of curricular tasks.

Creating a Space for Self-Transformation: Factors of Success for Adult Literacy Learners with Specific Learning Difficulties

A significant number of adults in adult literacy programs in Ontario have specific learning difficulties. This study sought to examine the holistic factors that contributed to these learners achieving their goals. Through a case study design, the data revealed that a combination of specific learning methods and strategies, along with particular characteristics of the instructor, participant, and class, and the evidence of self-transformation all seemed to contribute to the participant's success in the program. Instructor-directed teaching and cooperative learning were the main learning methods used in the class. General learning strategies employed were the use of core curriculum and authentic documents, and using phonics, repetition, assistive resources, and using activities that appealed to various learning styles. The instructor had a history of both professional development in the area of learning disabilities as well as experience working with learners who had specific learning difficulties. There also seemed to be a goodness of fit between the participant and the instructor. Several characteristics of the participant seemed to aid in his success: his positive self-esteem, self-advocacy skills, self-determination, self-awareness, and the fact that he enjoyed learning. The size (3-5 people) and type of class (small group) also seemed to have an impact. Finally, evidence that the participant went through a self-transformation seemed to contribute to a positive learner identity. These results have implications for practice, theory, and further research in adult education.

Investigation of Theories Supporting Engagement of Resistant Learners in Formal Academic Settings and Curriculum

This study sought to explore ways to work with a group of young people through an arts-based approach to the teaching of literacy. Through the research, the author integrated her own reflexivity applying arts methods over the past decade. The author’s past experiences were strongly informed by theories such as caring theory and maternal pedagogy, which also informed the research design. The study incorporated qualitative data collection instruments comprising interviews, journals, sketches, artifacts, and teacher field notes. Data were collected by 3 student participants for the duration of the research. Study results provide educators with data on the impact of creating informal and alternative ways to teach literacy and maintain student engagement with resistant learners.