Product labelling can confer sustained increases in expected and actual satiety

Expected satiety has been shown to play a key role in decisions around meal size. Recently it has become clear that these expectations can also influence the satiety that is experienced after a food has been consumed. As such, increasing the expected and actual satiety a food product confers without increasing its caloric content is of importance. In this study we sought to determine whether this could be achieved via product labelling. Female participants (N=75) were given a 223-kcal yoghurt smoothie for lunch. In separate conditions the smoothie was labelled as a diet brand, a highly-satiating brand, or an ‘own brand’ control. Expected satiety was assessed using rating scales and a computer-based ‘method of adjustment’, both prior to consuming the smoothie and 24 hours later. Hunger and fullness were assessed at baseline, immediately after consuming the smoothie, and for a further three hours. Despite the fact that all participants consumed the same food, the smoothie branded as highly-satiating was consistently expected to deliver more satiety than the other ‘brands’; this difference was sustained 24 hours after consumption. Furthermore, post-consumption and over three hours, participants consuming this smoothie reported significantly less hunger and significantly greater fullness. These findings demonstrate that the satiety that a product confers depends in part on information that is present around the time of consumption. We suspect that this process is mediated by changes to expected satiety. These effects may potentially be utilised in the development of successful weight-management products.

Hydrogen gas sensing properties of Pt/Ta2O5 Schottky diodes based on Si and SiC substrates

In this paper, we fabricated Pt/tantalum oxide (Ta2O5) Schottky diodes for hydrogen sensing applications. Thin (4 nm) layer of Ta2O5 was deposited on silicon (Si) and silicon carbide (SiC) substrates by radio frequency (RF) sputtering technique. We compared the performance of these sensors at different elevated temperatures of 100 ∘C and 150 ∘C. At these temperatures, the sensor based on SiC exhibited a larger sensitivity while the sensor based on Si exhibited a faster response toward hydrogen gas. We discussed herein, the responses exhibited by the Pt/Ta2O5 based Schottky diodes demonstrated a promising potential for hydrogen sensing applications.

Decoration of titania nanofibres with anatase nanoparticles as efficient photocatalysts for decomposing pesticides and phenols

Using a series of partial phase transitions, an effective photocatalyst with fibril morphology was prepared. The catalytic activities of these materials were tested against phenol and herbicide in water. Both H-titanate and TiO2-(B) fibres decorated with anatase nanocrystals were studied. It was found that anatase coated TiO2-(B) fibres prepared by a 45 h hydrothermal treatment followed by calcination were not only superior photocatalysts but could also be readily separated from the slurry after photocatalytic reactions due to its fibril morphology.

Vibrational spectroscopy of the borate mineral olshanskyite Ca3[B(OH)4]4(OH)2

The mineral olshanskyite is one of many calcium borate minerals which has never been studied using vibrational spectroscopy. The mineral is unstable and decomposes upon exposure to an electron beam. This makes the elemental analysis using EDX techniques difficult. Both the Raman and infrared spectra show complexity due to the complexity of the structure. Intense Raman bands are found at 989, 1,003, 1,025 and 1,069 cm-1 with a shoulder at 961 cm-1 and are assigned to trigonal borate units. The Raman bands at 1,141, 1,206 and 1,365 cm-1 are assigned to OH in-plane bending of BOH units. A series of Raman bands are observed in the 2,900–3,621cm-1 spectral range and are assigned to the stretching vibrations of OH and water. This complexity is also reflected in the infrared spectra. Vibrational spectroscopy enables aspects of the structure of olshanskyite to be elucidated.

Compressive and shear force generated in the lumbar spine of female rowers

Rowers have and accrue greater lumbar spine bone mineral density (BMD) associated with mechanical loading produced during rowing. The aim of this study was to estimate the mechanical loading generated at the lumbar spine (LS) that is apparently providing an osteogenic benefit. The cohort comprised 14 female rowers (average age: 19.7yrs; height: 170.9 cm, weight: 59.5 kg) and 14 female matched controls (average age: 20.9 m yrs; height: 167.5 cm; weight: 58.1 kg). BMD was assessed using the Hologic QDR 2000+ bone densitometer, indicating higher lumbar spine BMD in the rowers compared to the control subjects (1,069 +/- 0.1 vs. 1,027 +/- 0.1 g/cm2). No significant difference existed for BMD at any other site. All rowers performed a six-minute simulated race on a Concept II rowing ergometer. Mechanical loading generated at the lumbar spine during this task was assessed using a two-dimensional model of the spine, enabling the calculation of the compressive and shear forces at L4/L5. The shear force was the joint reaction force perpendicular to the spine at the L4/L5 joint. Peak compressive and shear force at the lumbar spine of the rowers were 2,694 +/- 609 (N) and 660 +/- 117 (N), respectively. Peak compressive force at the LS relative to body weight was 4.6 times body weight. The literature would suggest that forces of this magnitude, generated at the LS during maximal rowing, may be contributing to the site specific higher LS BMD found in the rowers.

Association of NOS1AP variants and depression phenotypes in schizophrenia

Background The nitric oxide synthase 1 adaptor protein gene (NOS1AP) has previously been recognised as a schizophrenia susceptibility gene due to its role in glutamate neurotransmission. The gene is believed to inhibit nitric oxide (NO) production activated by the N-methyl-d-aspartate (NMDA) receptor and reduced NO levels have been observed in schizophrenia patients. However, association studies investigating NOS1AP and schizophrenia have produced inconsistent results, most likely because schizophrenia is a clinically heterogeneous disorder. This study aims to investigate the association between NOS1AP variants and defined depression phenotypes of schizophrenia. Methods Nine NOS1AP SNPs, rs1415259, rs1415263, rs1858232, rs386231, rs4531275, rs4656355, rs4657178, rs6683968 and rs6704393 were genotyped in 235 schizophrenia subjects screened for various phenotypes of depression. Result One NOS1AP SNP (rs1858232) was associated with the broad diagnosis of schizophrenia and eight SNPs were associated with depression related phenotypes within schizophrenia. The rs1415259 SNP showed strong association with sleep dysregulation phenotypes of depression. Conclusion Results suggest that NOS1AP variants are associated with various forms of depression in schizophrenia and are more prevalent in males. Limitation Schizophrenia is a clinically heterogeneous disease that can vary greatly between different ethnic and geographic populations so our observations should be viewed with caution until they are independently replicated, particularly in larger patient cohorts.

Structure of the disodium salt of glucose 1-phosphate hydrate, 2Na+.C6H11O9P2-.3.5H2O

Mr= 367.2, monoclinic, C2, a = 8.429 (1),b= 10.184(2), c= 16.570(2)A, /~= 99.18 (1) °, U= 1404.2 A 3, z = 4, D m = 1.73, D x = 1.74 Mg m -3,Cu K~, 2 = 1.5418 A, g = 2.99 mm -1, F(000) = 764,T= 300K, final R for 1524 observed reflections is0.069. The endocyclic C-O bonds in the glucose ring are nearly equal with C(5)-O(5)= 1.445 (10) and C(1)-O(5)= 1.424(10). The pyranose sugar ring adopts a 4C 1 chair conformation. The conformation about the exocyclic C(5)-C(6) bond is gauche-gauche, in contrast to gauche-trans observed in the structure of the dipotassium salt of glucose 1-phosphate. The phosphate ester bond, P-O(1), is 1.641 (6)A, slightly longer than the 'high-energy' P-,.O bond in the monopotassium salt of phosphoenolpyruvate [1.612 (6)A]. Two sodium ions are six coordinated while the third has only five neighbours.

GWAS of 126,559 individuals identifies genetic variants associated with educational attainment

A genome-wide association study (GWAS) of educational attainment was conducted in a discovery sample of 101,069 individuals and a replication sample of 25,490. Three independent single-nucleotide polymorphisms (SNPs) are genome-wide significant (rs9320913, rs11584700, rs4851266), and all three replicate. Estimated effects sizes are small (coefficient of determination R(2) approximately 0.02%), approximately 1 month of schooling per allele. A linear polygenic score from all measured SNPs accounts for approximately 2% of the variance in both educational attainment and cognitive function. Genes in the region of the loci have previously been associated with health, cognitive, and central nervous system phenotypes, and bioinformatics analyses suggest the involvement of the anterior caudate nucleus. These findings provide promising candidate SNPs for follow-up work, and our effect size estimates can anchor power analyses in social-science genetics.

Acyclic peptides as conformational models Crystal structure of Boc-Aib-Leu-Pro-NHMe± 2H2O

The tripeptide Boc-Aib-Leu-Pro-NHMe crystallizes in the orthorhombic space group P212121 with a = 9.542, b = 15.200, c = 18.256 Å and Z = 4. Each peptide is associated wth two water molecules in the asymmetric unit of the crystal. The structure has been solved by direct methods and refined to an R-value of 0.069. The peptide adopts a structure without any intramolecular hydrogen bond. The three residues occupy distinctly different regions of the Ramachandran map: Aib in the left-handed 310-helical region (± = 67°, ± = 23°), Leu in the β-sheet region (± = - 133°, ± = 142°) and Pro in the poly (Pro) II region (± = - 69°, ± = 151°). An interesting observation is that each water molecule participates in four hydrogen bonds with distorted tetrahedral coordination about the oxygen atom.

Changes in energy efficiency in Australia: A decomposition of aggregate energy intensity using logarithmic mean Divisia approach

This paper provides an empirical estimation of energy efficiency and other proximate factors that explain energy intensity in Australia for the period 1978-2009. The analysis is performed by decomposing the changes in energy intensity by means of energy efficiency, fuel mix and structural changes using sectoral and sub-sectoral levels of data. The results show that the driving forces behind the decrease in energy intensity in Australia are efficiency effect and sectoral composition effect, where the former is found to be more prominent than the latter. Moreover, the favourable impact of the composition effect has slowed consistently in recent years. A perfect positive association characterizes the relationship between energy intensity and carbon intensity in Australia. The decomposition results indicate that Australia needs to improve energy efficiency further to reduce energy intensity and carbon emissions. © 2012 Elsevier Ltd.

Metal-Nucleotide Interactions: Crystal Structures of Alkali (Li+, Na+, K+) and Alkaline Earth (Ca2+, Mg2+) Metal Complexes of Adenosine 2'-Monophosphate

Crystal structures of lithium, sodium, potassium, calcium and magnesium salts of adenosine 2'-monophosphate (2'-AMP) have been obtained at atomic resolution by X-ray crystallographic methods. 2'-AMP.Li belongs to the monoclinic space group P21 with a = 7.472(3)Å, b = 26.853(6) Å, c = 9.184(1)Å, b = 113.36(1)Å and Z= 4. 2'-AMP.Na and 2'-AMP.K crystallize in the trigonal space groups P31 and P3121 with a = 8.762(1)Å, c = 34.630(5)Å, Z= 6 and a = 8.931(4), Åc = 34.852(9)Å and Z= 6 respectively while 2'-AMP.Ca and 2'-AMP.Mg belong to space groups P6522 and P21 with cell parameters a = 9.487(2), c = 74.622(13), Z = 12 and a = 4.973(1), b = 10.023(2), c = 16.506(2), beta = 91.1(0) and Z = 2 respectively. All the structures were solved by direct methods and refined by full matrix least-squares to final R factors of 0.033, 0.028, 0.075, 0.069 and 0.030 for 2'-AMP.Li, 2'-AMP.Na, 2'- AMP.K, 2'-AMP.Ca and 2'-AMP.Mg, respectively. The neutral adenine bases in all the structures are in syn conformation stabilized by the O5'-N3 intramolecular hydrogen bond as in free acid and ammonium complex reported earlier. In striking contrast, the adenine base is in the anti geometry (cCN = -156.4(2)°) in 2'-AMP.Mg. Ribose moieties adopt C2'-endo puckering in 2'-AMP.Li and 2'-AMP.Ca, C2'-endo-C3'-exo twist puckering in 2'-AMP.Na and 2'-AMP.K and a C3'-endo-C2'-exo twist puckering in 2'-AMP.Mg structure. The conformation about the exocyclic C4'-C5' bond is the commonly observed gauche-gauche (g+) in all the structures except the gauche- trans (g-) conformation observed in 2'-AMP.Mg structure. Lithium ions coordinate with water, ribose and phosphate oxygens at distances 1.88 to 1.99Å. Na+ ions and K+ ions interact with phosphate and ribose oxygens directly and with N7 indirectly through a water oxygen. A distinct feature of 2'-AMP.Na and 2'-AMP.K structures is the involvement of ribose O4' in metal coordination. The calcium ion situated on a two-fold axis coordinates directly with three oxygens OW1, OW2 and O2 and their symmetry mates at distances 2.18 to 2.42Å forming an octahedron. A classic example of an exception to the existence of the O5'-N3 intramolecular hydorgen bond is the 2'-AMP.Mg strucure. Magnesium ion forms an octahedral coordination with three water and three phosphate oxygens at distances ranging from 2.02 to 2.11Å. A noteworthy feature of its coordination is the indirect link with N3 through OW3 oxygen resulting in macrochelation between the base and the phosphate group. Greater affnity of metal clays towards 5' compared to 2' and 3' nucleotides (J. Lawless, E. Edelson, and L. Manring, Am. Chem. Soc. Northwest Region Meeting, Seattle. 1978) due to macrochelation infered from solution studies (S. S. Massoud, H. Sigel, Eur. J. Biochem. 179, 451-458 (1989)) and interligand hydrogen bonding induced by metals postulated from metal-nucleotide structures in solid state (V. Swaminathan and M. Sundaralingam, CRC. Crit. Rev. Biochem. 6, 245-336 (1979)) are borne out by our structures also. The stacking patterns of adenine bases of both 2'-AMP.Na and 2'-AMP.K structures resemble the 2'-AMP.NH4 structure reported in the previous article. 2'-AMP.Li, 2'-AMP.Ca and 2'-AMP.Mg structures display base-ribose O4' stacking. An overview of interaction of monovalent and divalent cations with 2' and 5'-nucleotides has been presented.

The Hybrid Consumer: Exploring the Drivers of a New Consumer Behaviour Type

A dramatically different consumption pattern seems to be emerging among a vast group of consumers. This may mean that conventional consumer stereotypes and segmentation theory are becoming outdated. The so called hybrid consumers seem to increasingly opt for both premium and budget alternatives in various product and service categories while mid-priced alternatives are losing share in their consumption basket. Although this type of polarisation, or dispersion, is already recognized as an important change, hybrid behaviour is still largely under-researched. The present study aims to analyze the possible drivers of hybrid consumption and by identifying typical categories and situations of trading up versus trading down derive tentative characteristics of hybrid consumption for further research on the topic. A tentative pattern of hybrid consumption was identified, which relates trading up to high-involvement, discretional spending and trading down to low-involvement necessities. However, it was also found that hybrid consumption transcends product category boundaries and may thus be less straightforward than previously perhaps assumed. In addition, a purchase pattern continuum was developed, accounting for various degrees of hybrid consumption.

Characterization of compact ICP ion source for focused ion beam applications

A compact, high brightness 13.56 MHz inductively coupled plasma ion source without any axial or radial multicusp magnetic fields is designed for the production of a focused ion beam. Argon ion current of density more than 30 mA/cm(2) at 4 kV potential is extracted from this ion source and is characterized by measuring the ion energy spread and brightness. Ion energy spread is measured by a variable-focusing retarding field energy analyzer that minimizes the errors due t divergence of ion beam inside the analyzer. Brightness of the ion beam is determined from the emittance measured by a fully automated and locally developed electrostatic sweep scanner. By optimizing various ion source parameters such as RF power, gas pressure and Faraday shield, ion beams with energy spread of less than 5 eV and brightness of 7100 Am(-2)sr(-1)eV(-1) have been produced. Here, we briefly report the details of the ion source, measurement and optimization of energy spread and brightness of the ion beam. (C) 2010 Elsevier B.V. All rights reserved.

Äidin raskausajan D-vitamiinitilanteen yhteys lapsen luustoon yhden vuoden iässä

Johdanto: Raskaudenaikaisen D-vitamiinin puutoksen on havaittu vaikuttavan negatiivisesti syntyvän lapsen luuston kasvuun. Myös lapsen riittävä D-vitamiinin saanti on merkittävä tekijä lapsen luuston hyvinvoinnissa. Suomalaisten odottavien äitien D-vitamiinin saanti on usein puutteellista, eikä D-vitamiinia muodostu iholla talvikuukausina Suomen pohjoisen sijainnin vuoksi. Suomalaisten raskaana olevien naisten heikko D-vitamiinitilanne saattaa vaikuttaa lasten luuston terveyteen. Tavoitteet: Työn tavoitteena oli tutkia ovatko raskauden aikainen D-vitamiinitilanne, lapsen D-vitamiinitilanne ja D-vitamiinin saanti vuoden iässä yhteydessä luuntiheyden ja -mineraalipitoisuuden muutoksiin lapsen ensimmäisen elinvuoden aikana. Aineisto ja menetelmät: Raskausaikana rekrytoiduista 126 äiti-lapsi-parista vuoden iässä seurantakäynnille saapui 89 (69 %). Lapsilta otettiin verinäyte ja siitä määritettiin D-vitamiinitilannetta kuvaava seerumin 25-hydroksi-D-vitamiinipitoisuus (25(OH)D) immunoentsymometrisellä menetelmällä. Lasten sääriluu tutkittiin pQCT-menetelmällä. Vastaavat tutkimukset oli suoritettu sekä lapsille että äideille synnytyksen jälkeen. Äitien seerumin 25(OH)D-pitoisuus alkuraskauden aikana määritettiin THL:n keräämistä verinäytteistä. Lapsilta kerättiin kolmen vuorokauden ruokapäiväkirja sekä kyselylomake, joiden avulla selvitettiin D-vitamiinin saanti ruokavaliosta, D-vitamiinilisän käyttö ja taustatekijöitä. Äideille suoritettiin lyhyt haastattelu koskien lapsen terveyttä ja kehitystä. Tilastollinen tarkastelu suoritettiin SPSS (versio 16.0) –ohjelmalla. Korrelaatioanalyysilla selvitettiin minkä tekijöiden kanssa 1-vuotiaan luuston laatua kuvaavat muuttujat ja niissä tapahtuneet muutokset korreloivat. Regressioanalyysilla tutkittiin selittääkö raskausajan D-vitamiinitilanne, lapsen D-vitamiinitilanteen muutos tai lapsen D-vitamiinin saanti yhden vuoden iässä luustomuuttujien muutoksia. Monimuuttujamallin avulla tarkasteltiin, onko raskaudenaikainen D-vitamiinitilanne lineaarisesti yhteydessä luumuuttujien arvoihin. Tulokset: Lasten D-vitamiinin saanti ylitti keskimäärin suositukset (KA 12,3 ?g/vrk), mutta 20 %:lla seerumin 25(OH)D-pitoisuus oli riittämätön (< 50 nmol/l). Seurantakäynnin aikaan yhä imetetyillä lapsilla Dvitamiinitilanne oli heikompi kuin ei-imetetyillä (p=0,044). Luun mineraalimäärä (BMC, engl. bone mineral content) oli kasvanut eniten niillä lapsilla, joiden äitien D-vitamiinitilanne oli ollut heikoin raskauden aikana ja vähiten niillä, joilla D-vitamiinitilanne raskausaikana oli ollut riittävä. Tulos ei kuitenkaan yltänyt merkitsevälle tasolle (p=0.069). Muissa luumuuttujissa viitteitä yhteyksistä ei löytynyt. Taustatietoja tarkastellessa havaittiin merkitsevä negatiivinen yhteys raskausajan D-vitamiinitilanteen ja lapsen sairastamien nuhakuumeiden lukumäärän välillä (p=0.044). Johtopäätökset: Lasten D-vitamiinin saanti oli suositusten mukaista, mutta siitä huolimatta osalla lapsista Dvitamiinitilanne ei ollut optimaalinen. Erot BMC:n muutoksessa ryhmien välillä viittaavat saavutuskasvuun eli heikomman D-vitamiinitilanteen vaikutus luustoon kompensoituu BMC:n osalta ensimmäisen elinvuoden aikana. Pitkäkestoisia lisätutkimuksia raskausajan D-vitamiinitilanteen ja lapsen luuston yhteyksistä suuremmilla tutkimusotoksilla tarvitaan.

Conformational studies of the triphenylphosphazenyl side chain in cyclophosphazenes. I. Crystal and molecular structure of N3P3C15(NPPh3)

The title compound, C t8H~sC15NaP4, crystallizes in the monoclinic space group P2~/n with a = 20.14 (2), b = 8.69 (1), c = 14.92 (2) A, fl = 98.8 (3) ° , Z = 4. The structure was determined from visual data and refined to R = 0-069 for 1450 reflections. The cyclophosphazene ring is non-planar. The exocyclic NPPh 3 group exhibits type I conformation [R. A. Shaw (1975). Pure Appl. Chem. 44, 317-341] in which the N-P bond is perpendicular to the adjacent P-CI bond.