Waves generated by two or more ships in a channel

The numerical model FUNWAVE+Ship simulates the generation and propagation of ship waves to shore, including phenomena such as refraction, diffraction, currents and breaking of waves. The interaction of two wave trains, generated by ships moving either in the same direction at different speeds or in opposite directions, is studied. Focus is given to the wave orbital velocities and to the free surface pattern.

Persistence of epoxy-based sealer residues in dentin treated with different chemical removal protocols

The presence of residual endodontic sealer in the pulp chamber may cause discoloration of the dental crown and interfere with the adhesion of restorative materials. The aim of this study was to compare the efficacy of different solvents in removing residues of an epoxy resin-based sealer (AH Plus) from the dentin walls of the pulp chamber, by scanning electron microscopy (SEM). Forty-four bovine incisor dental crown fragments were treated with 17% EDTA and 2.5% NaOCl. Specimens received a coating of AH Plus and were left undisturbed for 5 min. Then, specimens were divided in four groups (n = 10) and cleaned with one of the following solutions: isopropyl alcohol, 95% ethanol, acetone solution, or amyl acetate solution. Negative controls (n = 2) did not receive AH Plus, while in positive controls (n = 2) the sealer was not removed. AH Plus removal was evaluated by SEM, and a score system was applied. Data were analyzed by Kruskal-Wallis and Dunn tests. None of the solutions tested was able to completely remove AH Plus from the dentin of the pulp chamber. Amyl acetate performed better than 95% ethanol and isopropyl alcohol (p < 0.05), but not better than acetone (p > 0.05) in removing the sealer from dentin. No significant differences were observed between acetone, 95% ethanol, and isopropyl alcohol (p > 0.05). It was concluded that amyl acetate and acetone may be good options for cleaning the pulp chamber after obturation with AH Plus. SCANNING 35:17-21, 2013. © 2012 Wiley Periodicals, Inc. © Wiley Periodicals, Inc.

A brief discussion about image quality and SEM methods for quantitative fractography of polymer composites

The methodology for fracture analysis of polymeric composites with scanning electron microscopes (SEM) is still under discussion. Many authors prefer to use sputter coating with a conductive material instead of applying low-voltage (LV) or variable-pressure (VP) methods, which preserves the original surfaces. The present work examines the effects of sputter coating with 25 nm of gold on the topography of carbon-epoxy composites fracture surfaces, using an atomic force microscope. Also, the influence of SEM imaging parameters on fractal measurements is evaluated for the VP-SEM and LV-SEM methods. It was observed that topographic measurements were not significantly affected by the gold coating at tested scale. Moreover, changes on SEM setup leads to nonlinear outcome on texture parameters, such as fractal dimension and entropy values. For VP-SEM or LV-SEM, fractal dimension and entropy values did not present any evident relation with image quality parameters, but the resolution must be optimized with imaging setup, accompanied by charge neutralization. © Wiley Periodicals, Inc.

Avaliação histológica e histomorfométrica do efeito de fármacos fotossensíveis ativados por LED no reparo ósseo: estudo em coelhos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

SEM Evaluation of the Interface Between Filling and Root- End Filling Materials

The aim of this ex vivo study was to evaluate, by scanning electron microscopy (SEM), the presence of gaps at the interface between filling material and three root-end filling materials. Thirty human upper molars disto-buccal roots were instrumented and filled with gutta-percha and eugenol-based sealer. The apicoectomy was performed 2mm from the apex and retrograde cavities were prepared with ultrasonic points (3mm in deep). The samples were divided into three experimental groups (n=10): Group Iwhite mineral trioxide aggregate (MTA); Group IISuper EBA; and Group IIIPortland cement. The root-end filling materials were inserted into the retocavities using a MTA carrier. After 48h, the roots were transversally sectioned in order to obtain the apical 5mm. Next, each specimen was prepared longitudinally with crescent granulation of abrasives water-wet sandpapers in order to expose the filling and root-end filling materials. Then, the specimens were subjected to slow dehydration with silica gel, mounted onto specific stubs and coated with paladium coverage for SEM analysis of the interface between filling and root-end filling materials. The percentage of gaps at the interfacial area was calculated by using Image Tool 3.0 software. Super EBA presented the higher percentage of gaps (1.5 +/- 0.67%), whereas MTA presented the lowest values (0.33 +/- 0.20%; p=0.0004). Despite the statistical differences observed between Super EBA and MTA, all the root-end filling materials presented great adaptation to the filling material, presenting small amount of gaps. SCANNING 36:252-257, 2014. (c) 2013 Wiley Periodicals, Inc.

Ecological competition and the incidence of Acinetobacter baumannii bloodstream infections in a teaching hospital in Southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mannose-binding lectin gene polymorphism and risk factors for cardiovascular disease in postmenopausal women

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influencia del número de capas de adhesivo en la conductancia hidraúlica en dentina humana

The aim of this study was to compare the hydraulic conductance in human dentin disks, where 1, 2 or 3 layers of adhesive Single Bond 2(SB2) and Single Bond Universal(SBU) were applied. 84 1 mm. thick(+/- 0.1 mm.) dentin disks were fabricated. Samples were divided into 7 groups (n = 12) Control (without adhesive), A1: one layer of SB2, A2: two layers SB2, A3: three layers SB2, B1: one layer SBU, B2: two layers of SBU, B3: three layers of SBU. The results as averages for the hydraulic conductance of each separate group were: Control (0.0363), A1 (0.0206), A2 (0.0070), A3 (0.0061), B1 (0.0161), B2 (0.0062), B3(0.0056) expressed µl/min.cm2. There is statistically significant difference CH, between the control group and those samples that one coat was applied (p = 0.000) and also between the application of one and two layers (p = 0.000). No difference between the two adhesives (p = 0.434). Summary Key words: Dentin, conductance, difussion adhesive layers.

MicroRNAs targeting the immunomodulatory HLA-G gene: a new survey searching for microRNAs with potential to regulate HLA-G

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chromosome evolution in lycosoid spiders (Araneomorphae): a scenario based on analysis of seven species of the families Lycosidae, Senoculidae and Trechaleidae

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bromeliads as biodiversity amplifiers and habitat segregation of spider communities in a Neotropical rainforest

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A metalloproteomics study on the association of mercury with breast milk in samples from lactating women in the Amazon region of Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Homology in a context dependent predatory behavior in spiders (Araneae)

Stereotyped behaviors have been routinely used as characters for phylogeny inference, but the same cannot be said of the plastic aspects of performance, which routinely are taken as a result of ecological processes. In this paper we examine the evolution of one of these plastic behavioral phenotypes, thus fostering a bridge between ecological and evolutionary processes. Foraging behavior in spiders is context dependent in many aspects, since it varies with prey type and size, spider nutritional and developmental state, previous experience and, in webweavers, is dependent on the structure of the web. Reeling is a predatory tactic typical of cobweb weavers (Theridiidae), in which the spider moves the prey toward her by pulling the capture thread (gumfoot) to which it is adhered. Predatory reeling is dependent on the gumfoot for its expression, and has not been previously reported in orbweavers. In order to investigate the evolution of this web dependent behavior, we built artificial, pseudogumfoot lines in orbwebs and registered parameters of the predatory tactics in this modified web. Aspects of the predatory tactics of 240 individuals (12 species in 4 families) were measured, and the resulting data were optimized on the phylogeny of Orbiculariae. All species perform predatory reeling with the pseudogumfoot lines. Thus, predatory reeling is homologous for the whole Orbiculariae group. In nature, holes made by insects in ecribellate orbs produce pseudogumfoot lines (similar to out experimentally modified webs), and thus reeling occurred naturally in ecribellates. Nevertheless, outside lab conditions, predatory reeling does not occur among cribellate orbweavers, so that this behavior could not have been selected for in the cribellate ancester of orbweavers. Cribellate spiders are flexible enough as to present novel and adaptive predatory responses (reeling) even when exposed for the first time to conditions outside their usual environment. Thus, the evolution of reeling suggests and alternative mechanism for the production of evolutionary novelties; that is, the exploration of unusual ecological conditions and of the regular effects these abnormal conditions have on phenotype expression.

Pentraxin 3 accelerates lung injury in high tidal volume ventilation in mice

Mechanical ventilation is the major cause of iatrogenic lung damage in intensive care units. Although inflammation is known to be involved in ventilator-induced lung injury (VILI), several aspects of this process are still unknown. Pentraxin 3 (PTX3) is an acute phase protein with important regulatory functions in inflammation which has been found elevated in patients with acute respiratory distress syndrome. This study aimed at investigating the direct effect of PTX3 production in the pathogenesis of VILI. Genetically modified mice deficient and that over express murine Ptx3 gene were subjected to high tidal volume ventilation (V-T = 45 mL/kg, PEEPzero). Morphological changes and time required for 50% increase in respiratory system elastance were evaluated. Gene expression profile in the lungs was also investigated in earlier times in Ptx3-overexpressing mice. Ptx3 knockout and wild-type mice developed same lung injury degree in similar times (156 +/- 42 min and 148 +/- 41 min, respectively: p = 0.8173). However, Ptx3 overexpression led to a faster development of VILI in Ptx3-overexpressing mice (77 +/- 29 min vs 118 +/- 41 min, p = 0.0225) which also displayed a faster kinetics of Il1b expression and elevated Ptx3, Cxcl1 and Ccl2 transcripts levels in comparison with wild-type mice assessed by quantitative real-time polymerase chain reaction. Ptx3 deficiency did not impacted the time for VILI induced by high tidal volume ventilation but Ptx3-overexpression increased inflammatory response and reflected in a faster VILI development. (C) 2012 Elsevier Ltd. All rights reserved.

Maternal care in the Neotropical harvestman Liogonyleptoides tetracanthus (Opiliones: Gonyleptidae)

We describe post-ovipositional maternal care in Liogonyleptoides tetracanthus Mello-Leitao 1932 (Gonyleptinae) and experimentally evaluate the protective role of this behavior against egg predation under laboratory conditions. Females laid 138.8 eggs on average and remained close to the clutch during the entire day. Eggs hatched after 11-15 days and nymphs dispersed from maternal protection after one to two days. Most of the experimental clutches left unattended were entirely consumed by conspecifics in 2-3 days. There was no reduction in egg number in the clutches protected by females. Although biological data are scarce, there are cases of egg hiding, paternal and maternal care within the subfamily Gonyleptinae. This diversity of forms of parental care is unusual when compared to other gonyleptid subfamilies, and future systematic revisions of the polyphyletic Gonyleptinae should include parental care as a potential source of phylogenetic information.