Evaluation of the zinox and zeolite materials as adsorbents to remove H2S from natural gas

MELO, Dulce Maria de Araújo et al. Evaluation of the Zinox and Zeolite materials as adsorbents to remove H2S from natural gas. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, Estados Unidos, v. 272, p. 32-36, 2006.

Biocatálise aplicada à valorização de óleos alimentares usados

O crescente consumo de energia, bem como a possibilidade de esgotamento dos recursos não renováveis, tem fomentado a busca de fontes de energia alternativas. O biodiesel é um biocombustível obtido a partir de fontes renováveis e a sua utilização permite reduzir as emissões de gases com efeito de estufa. Nos últimos anos tem-se produzido biodiesel a partir de óleos alimentares usados (OAU), sendo que com esta aplicação valoriza-se um resíduo e simultaneamente produz-se um combustível “verde”. O biodiesel é produzido através das reações de transesterificação e/ou esterificação entre triglicerídeos e/ou ácidos gordos livres e um álcool, na presença de um catalisador. O rendimento do processo está estritamente relacionado com o tipo de catalisador e as condições que este opera. O principal objetivo do presente trabalho consistiu na avaliação do efeito de alguns parâmetros operacionais no desempenho de uma lípase imobilizada (Novozyme® 435), nomeadamente: (i) índice de acidez do óleo, (ii) razão mássica de enzima/óleo e (iii) método regeneração da enzima com vista à sua reutilização. Também foi objeto de estudo do presente trabalho a produção em contínuo, num (bior)reator tubular de leito fixo, de ésteres metílicos de ácidos gordos (FAME) usando a referida enzima. Registou-se um aumento rendimento em com o incremento do índice de acidez do óleo usado, o que indicia que a enzima catalisa simultaneamente as reações de esterificação e transesterificação. Relativamente à razão mássica de enzima/óleo, dentro da gama testada verificou-se um aumento do rendimento em FAME com a concentração da enzima em meio reacional. Dos vários solventes testados, a aplicação de solvente tert-butanol na regeneração (com incubação) da enzima foi o que melhores resultados teve. Finalmente, os resultados obtidos no ensaio de produção de FAME num biorreator contínuo são motivadores, criando expectativas de uma possível aplicação industrial no futuro.

Evaluation of the zinox and zeolite materials as adsorbents to remove H2S from natural gas

MELO, Dulce Maria de Araújo et al. Evaluation of the Zinox and Zeolite materials as adsorbents to remove H2S from natural gas. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, Estados Unidos, v. 272, p. 32-36, 2006.

Produção de exopolissacarídeos bacterianos a partir de glicerol residual gerado na síntese de biodiesel

A busca por combustíveis alternativos, tais como os biocombustíveis, torna-se necessária devido à crescente demanda por combustíveis em todos os setores da atividade humana, sendo que quase toda energia consumida no mundo provém do petróleo, uma fonte limitada, que emite grande quantidade de gases poluentes. Devido à grande diversidade de culturas oleoginosas no país, o Brasil demonstra potencial para substituição do diesel pelo biodiesel. No processo de obtenção deste, o óleo vegetal sofre uma transesterificação, sob a ação de um catalisador básico e na presença de um álcool, formando três moléculas de ésteres metílicos ou etílicos de ácidos graxos, que constituem o biodiesel em sua essência, liberando uma molécula de glicerol, que é o coproduto mais abundante desta reação. Sendo assim, a utilização do glicerol residual é uma ótima alternativa para agregar valor à cadeia produtiva do biodiesel, minimizar os danos de um possível descarte inadequado, além de diminuir os custos do processo. Com este intuito, este trabalho propõe o uso do glicerol residual como fonte de carbono para produção de exopolissacarídeos (EPSs). Para tal, foram utilizadas linhagens de bactérias mencionadas na literatura como produtoras de EPSs de importância comercial, sendo elas: Xanthomonas campestris pv. mangiferaeindicae IBSBF 1230, Pseudomonas oleovarans NRRL B-14683, Sphingomonas capsulata NRRL B-4261 e Zymomonas mobilis NRRL B-4286. Os cultivos foram realizados em meio apropriado para cada micro-organismo, e como fontes de carbono foram testadas a sacarose, o glicerol residual e uma mistura de ambos na proporção de 1:1 m/m. Os meios foram inoculados com suspensão da bactéria em estudo, sendo avaliados parâmetros relativos ao crescimento celular e à produção de EPSs. Para X. campestris pv. mangiferaeindicae, foram determinadas algumas propriedades reológicas e térmicas dos EPSs produzidos com as diferentes fontes de carbono, bem como o índice de emulsificação com diferentes óleos vegetais. X. campestris apresentou uma concentração de EPSs em torno de 4 g.L-1 em todos os meios estudados, comportamento similar ao da bactéria P. oleovorans, diferindo apenas no meio contendo sacarose (0,8 g.L-1 ). S. capsulata apresentou uma maior concentração de EPSs em meios contendo sacarose e a mistura de sacarose com glicerol residual, em torno de 3,4 g.L-1 , e em meio contendo glicerol residual este valor caiu para 1,7 g.L-1 . Já Z. mobilis apresentou um melhor resultado em meio contendo sacarose e glicerol residual, atingindo 1,3 g.L-1 , sendo que em meio contendo somente sacarose e glicerol residual estes valores foram inferiores alcançando 0,2 e 0,7 g.L-1 , respectivamente. Quase todas as bactérias atingiram a fase estacionária em 24 h de cultivo e o pH permaneceu praticamente constante, sendo verificada uma queda mais acentuada somente para Z. mobilis. O comportamento reológico foi similar para as xantanas produzidas nos diferentes meios, entretanto a viscosidade inicial foi maior com o meio a sacarose (637 cP), seguido da mistura de sacarose com glicerol residual (279 cP) e glicerol residual (60 cP). O IE24 foi superior quando utilizado o óleo de milho, atingindo valores de 97, 72 e 64 % em sacarose, mistura de sacarose com glicerol e glicerol residual, respectivamente. Desta forma, pode-se afirmar que a mudança na fonte de carbono afeta estas propriedades.

Characterization of the methanol recovery process at Prio Biocombustíveis S. A.

In a industrial environment, to know the process one is working with is crucial to ensure its good functioning. In the present work, developed at Prio Biocombustíveis S.A. facilities, using process data, collected during the present work, and historical process data, the methanol recovery process was characterized, having started with the characterization of key process streams. Based on the information retrieved from the stream characterization, Aspen Plus® process simulation software was used to replicate the process and perform a sensitivity analysis with the objective of accessing the relative importance of certain key process variables (reflux/feed ratio, reflux temperature, reboiler outlet temperature, methanol, glycerol and water feed compositions). The work proceeded with the application of a set of statistical tools, starting with the Principal Components Analysis (PCA) from which the interactions between process variables and their contribution to the process variability was studied. Next, the Design of Experiments (DoE) was used to acquire experimental data and, with it, create a model for the water amount in the distillate. However, the necessary conditions to perform this method were not met and so it was abandoned. The Multiple Linear Regression method (MLR) was then used with the available data, creating several empiric models for the water at distillate, the one with the highest fit having a R2 equal to 92.93% and AARD equal to 19.44%. Despite the AARD still being relatively high, the model is still adequate to make fast estimates of the distillate’s quality. As for fouling, its presence has been noticed many times during this work. Not being possible to directly measure the fouling, the reboiler inlet steam pressure was used as an indicator of the fouling growth and its growth variation with the amount of Used Cooking Oil incorporated in the whole process. Comparing the steam cost associated to the reboiler’s operation when fouling is low (1.5 bar of steam pressure) and when fouling is high (reboiler’s steam pressure of 3 bar), an increase of about 58% occurs when the fouling increases.

Engine wear and used oil analysis - comparative study in high speed diesel engines

The operational life and reliability of I.C. engines are limited to a certain extent by the break down of the engine components due to wear. It is advantageous to know the condition of an engine and its components without disassembling for detailed measurements. This paper describes the possibility of employing chemical analysis of the used crank case oil to predict the wear of engine components. It is concluded that the acidity and carbon contents of the crank case oil play a significant role in assessing the wear of copper-lead bearings used for the big end of the connecting rod.

Engine wear and used oil analysis-A comparative study in high speed diesel engines

The operational life and reliability of I.C. engines are limited to a certain extent by the break down of the engine components due to wear. It is advantageous to know the condition of an engine and its components without disassembling for detailed measurements. This paper describes the possibility of employing chemical analysis of the used crank case oil to predict the wear of engine components. It is concluded that the acidity and carbon contents of the crank case oil play a significant role in assessing the wear of copper-lead bearings used for the big end of the connecting rod.

Grafting of Dispersants on MoS2 Nanoparticles in Base Oil Lubrication of Steel

Solid lubricant nanoparticles in suspension in oil are good lubricating options for practical machinery. In this article, we select a range of dispersants, based on their polar moieties, to suspend 50-nm molybdenum disulfide particles in an industrial base oil. The suspension is used to lubricate a steel on steel sliding contact. A nitrogen-based polymeric dispersant (aminopropyl trimethoxy silane) with a free amine group and an oxygen-based polymeric dispersant (sorbital monooleate) when grafted on the particle charge the particle negatively and yield an agglomerate size which is almost the same as that of the original particle. Lubrication of the contact by these suspensions gives a coefficient of friction in the similar to 0.03 range. The grafting of these surfactants on the particle is shown here to be of a chemical nature and strong as the grafts survive mechanical shear stress in tribology. Such grafts are superior to those of other silane-based test surfactants which have weak functional groups. In the latter case, the particles bereft of strong grafts agglomerate easily in the lubricant and give a coefficient of friction in the 0.08-0.12 range. This article investigates the mechanism of frictional energy dissipation as influenced by the chemistry of the surfactant molecule.

Transient flow of the oil-refrigerant mixture through the radial clearance in rolling piston compressors

Unsteady flow of oil and refrigerant gas through radial clearance in rolling piston compressors has been modeled as a heterogeneous mixture, where the properties are determined from the species conservation transport equation coupled with momentum and energy equations. Time variations of pressure, tangential velocity of the rolling piston and radial clearance due to pump setting have been included in the mixture flow model. Those variables have been obtained by modeling the compression process, rolling piston dynamics and by using geometric characteristics of the pump, respectively. An important conclusion concerning this work is the large variation of refrigerant concentration in the oil-filled radial clearance during the compression cycle. That is particularly true for large values of mass flow rates, and for those cases the flow mixture cannot be considered as having uniform concentration. In presence of low mass flow rates homogeneous flow prevail and the mixture tend to have a uniform concentration. In general, it was observed that for calculating the refrigerant mass flow rate using the difference in refrigerant concentration between compression and suction chambers, a time average value for the gas concentration should be used at the clearance inlet.

The application of neural networks to the analysis of dissolved gases in insulating oil used in transformers

The state of insulating oils used in transformers is determined through the accomplishment of physical-chemical tests, which determine the state of the oil, as well as the chromatography test, which determines possible faults in the equipment. This article concentrate on determining, from a new methodology, a relationship among the variation of the indices obtained from the physical-chemical tests with those indices supplied by the chromatography tests.The determination of the relationship among the tests is accomplished through the application of neural networks. From the data obtained by physical-chemical tests, the network is capable to determine the relationship among the concentration of the main gases present in a certain sample, which were detected by the chromatography tests.More specifically, the proposed approach uses neural networks of perceptron type constituted of multiple layers. After the process of network training, it is possible to determine the existent relationship between the physical-chemical tests and the amount of gases present in the insulating oil.

Ethnobotanical study of the sages used in traditional Valencian medicine and as essential oil: characterization of an endemic Salvia and its contribution to local development

Seven wild and cultivated Salvia species and two Phlomis species, used traditionally in Valencian medicine to treat a variety of external and internal ailments, were studied. New ethnobotanical data are provided, obtained from semistructured interviews with 34 people in the Valencian area. A seasonal characterization of the essential oil of a wild sage, Salvia blancoana Webb & Heldr. subsp. mariolensis Figuerola, by GC-FID and GC-MS was carried out as a means to ensure quality control of endemic traditional species such as this one, which has been commercialized by local industries. A comparison with the essential oil of Salvia lavandulifolia Vahl subsp.lavandulifolia allowed inclusion of the wild sage within the commercial 'Spanish sage' oil.

How do I manage my used oil and used oil filters?

"Information presented in this publication is intended to provide a general understanding of the statutory and regulatory requirements governing used oil and oil filters generated by small businesses remediation waste. This information is not intended to replace, limit or expand upon the complete statutory and regulatory requirements found in the Illinois Environmental Protection Act and Title 35 of the Illinois Administrative Code of Regulations."