Avances en estudios observacionales de ciencias del deporte desde los mixed methods

Desde ser un movimiento emergente a finales del siglo XX hasta la actualidad, destaca el impulso, fortaleza, y sostenibilidad con que han crecido y se han desarrollado los mixed methods, tanto genéricamente, como en el ámbito especifico de Ciencias del Deporte, aunque en menor medida, y de forma desigual según las modalidades deportivas. Se presenta el recorrido durante los últimos quince años, y se puede comprobar la rapidez de su expansión, aunque limitado a pocas modalidades deportivas. Analizando las posibles razones que han influido en una utilización mucho más exigua que en otros ámbitos, consideramos que son superables, y que en la actualidad no existen limitaciones que objetivamente sigan incidiendo en un uso reducido. Muchos de los estudios observacionales realizados en el ámbito del deporte ya son estudios mixed methods. Finalmente, se desarrolla un apartado que comporta una novedad de planteamiento en un estudio que se pretende actúe como referente, pero que en la práctica investigadora diaria se viene aplicando de forma claramente sostenida a lo largo de las dos últimas décadas, y es la consideración de la metodologia observacional como mixed method en sí misma, dado que comporta la integración de elementos cualitativos y cuantitativos en la práctica totalidad de los casos.

Working with Student Teachers: A Mixed Methods Study to Examine the Roles and Self-Identified Dispositions of Cooperating Teachers

A critical component of teacher education is the field experience during which candidates practice under the supervision of experienced teachers. Programs use the InTASC Standards to define the requisite knowledge, skills, and dispositions for teaching. Practicing teachers are familiar with the concepts of knowledge and skills, but they are less familiar with dispositions. Practicing teachers who mentor prospective teachers are underrepresented in the literature, but they are critical to teacher preparation. The research goals were to describe the self-identified dispositions of cooperating teachers, identify what cooperating teachers consider their role in preparing prospective teachers, and explain challenges that cooperating teachers face. Using a mixed methods design, I conducted a quantitative survey followed by a qualitative case study. When I compared survey and case study data, cooperating teachers report possessing InTASC critical dispositions described in Standard 2: Learning Differences, Standard 3: Learning Environments, and Standard 9: Professional Learning and Ethical Practice, but not Standard 6: Assessment and Standard 10: Leadership and Collaboration. Cooperating teachers assume the roles of modeler, mentor and advisor, and informal evaluator. They explain student teachers often lack skills and dispositions to assume full teaching responsibilities and recommend that universities better prepare candidates for classrooms. Cooperating teachers felt university evaluations were not relevant to teaching reality. I recommend modifying field experiences to increase the quantity and duration of classroom placements. I suggest further research to detail cooperating teacher dispositions, compare cooperating teachers who work with different universities, and determine if cooperating teacher dispositions influence student teacher dispositions.

Análisis del comportamiento táctico ofensivo en momentos críticos de juego en el alto rendimiento en balonmano: un estudio Mixed Methods

El objetivo del artículo es analizar las variables que influyen en las fases ofensivas críticas del balonmano de alto rendimiento desde una perspectiva dinámica ecológica y con un planteamiento Mixed Methods. Evaluamos los diferentes sistemas tácticos ofensivos en ataque posicional y en contraataque de las últimas diez posesiones del balón y acciones ofensivas de partidos de balonmano de élite mediante un análisis observacional en dos etapas. Una primera etapa CUALI, materializada en forma de registro descriptivo, que permitieron la construcción de un sistema de observación (SOCTO); y una segunda etapa CUANTI con la que obtuvimos un registro sistematizado posterior mediante las siguientes dimensiones: el marcador, el tipo de defensa, la simetría numérica, la zona de finalización y el tipo de finalización. Utilizando el software de registro LINCE, se observaron 19 partidos de las fases finales masculinas del Campeonato del Mundo 2011, Campeonato de Europa 2012 y Juegos Olímpicos 2012. El análisis descriptivo inicial realizada por entrenadores expertos se ha complementado con un análisis de T-patterns. Los resultados reafirman que en los momentos críticos y de desigualdad del final de los partidos los equipos perdedores utilizan en la fase ofensiva las zonas de finalización más alejadas de la portería contraria (zona de 9 metros) y los equipos ganadores utilizan en la fase ofensiva las zonas de finalización intermedias (entre 6 y 9 metros) aumentando así su eficacia.

Do Children's Health Resources Differ According to Preschool Physical Activity Programmes and Parental Behaviour? A Mixed Methods Study

Preschool can have positive effects on the development of a healthy lifestyle. The present study analysed to what extent different conditions, structures and behavioural models in preschool and family-children's central social microsystems-can lead to differences in children's health resources. Using a cross-sectional mixed methods approach, contrast analyses of "preschools with systematic physical activity programmes" versus "preschools without physical activity programmes" were conducted to assess the extent to which children's physical activity, quality of life and social behaviour differ between preschools with systematic and preschools without physical activity programmes. Differences in children's physical activity according to parental behaviour were likewise assessed. Data on child-related outcomes and parent-related factors were collected via parent questionnaires and child interviews. A qualitative focused ethnographic study was performed to obtain deeper insight into the quantitative survey data. Two hundred and twenty seven (227) children were interviewed at 21 preschools with systematic physical activity programmes, and 190 at 25 preschools without physical activity programmes. There was no significant difference in children's physical activity levels between the two preschool types (p = 0.709). However, the qualitative data showed differences in the design and quality of programmes to promote children's physical activity. Data triangulation revealed a strong influence of parental behaviour. The triangulation of methods provided comprehensive insight into the nature and extent of physical activity programmes in preschools and made it possible to capture the associations between systematic physical activity promotion and children's health resources in a differential manner.

Mindfulness-Based Cognitive Therapy for older people in a community setting: a mixed methods feasibility study

Rationale: In line with complex intervention development, this research takes a systematic approach to examining the feasibility and acceptability of delivering Mindfulness-Based Cognitive Therapy (MBCT) to older people who experience symptoms of depression. Methods: A mixed methods approach was adopted in line with recommendations made by the MRC Complex Intervention Development framework. Quantitative and qualitative methods were combined by administering questionnaires as well as conducting post intervention interviews. A number of trial feasibility factors were examined such as recruitment and attrition rates. Qualitative data was analysed using Braun and Clarke’s thematic analysis framework. Results: Nine participants started the MBCT intervention and six completed the 8-week programme. The results suggest that MBCT for older people is feasible and acceptable. Participants reported improved mindfulness skills. Participants responded positively to being asked to take part in research and appeared to particularly value the group delivery format of the intervention. Conclusions: MBCT is both feasible and acceptable for older people experiencing symptoms of depression. Further research is required with larger sample sizes to allow for more robust statistical exploration of outcome measures, including mechanisms of change.

Using an end-of-life care pathway in acute stroke: a mixed methods study of decision-making and care experiences

Background: The evidence base on end-of-life care in acute stroke is limited, particularly with regard to recognising dying and related decision-making. There is also limited evidence to support the use of end-of-life care pathways (standardised care plans) for patients who are dying after stroke. Aim: This study aimed to explore the clinical decision-making involved in placing patients on an end-of-life care pathway, evaluate predictors of care pathway use, and investigate the role of families in decision-making. The study also aimed to examine experiences of end-of-life care pathway use for stroke patients, their relatives and the multi-disciplinary health care team. Methods: A mixed methods design was adopted. Data were collected in four Scottish acute stroke units. Case-notes were identified prospectively from 100 consecutive stroke deaths and reviewed. Multivariate analysis was performed on case-note data. Semi-structured interviews were conducted with 17 relatives of stroke decedents and 23 healthcare professionals, using a modified grounded theory approach to collect and analyse data. The VOICES survey tool was also administered to the bereaved relatives and data were analysed using descriptive statistics and thematic analysis of free-text responses. Results: Relatives often played an important role in influencing aspects of end-of-life care, including decisions to use an end-of-life care pathway. Some relatives experienced enduring distress with their perceived responsibility for care decisions. Relatives felt unprepared for and were distressed by prolonged dying processes, which were often associated with severe dysphagia. Pro-active information-giving by staff was reported as supportive by relatives. Healthcare professionals generally avoided discussing place of care with families. Decisions to use an end-of-life care pathway were not predicted by patients’ demographic characteristics; decisions were generally made in consultation with families and the extended health care team, and were made within regular working hours. Conclusion: Distressing stroke-related issues were more prominent in participants’ accounts than concerns with the end-of-life care pathway used. Relatives sometimes perceived themselves as responsible for important clinical decisions. Witnessing prolonged dying processes was difficult for healthcare professionals and families, particularly in relation to the management of persistent major swallowing difficulties.

New Rigorous Decomposition Methods for Mixed-integer Linear and Nonlinear Programming

Process systems design, operation and synthesis problems under uncertainty can readily be formulated as two-stage stochastic mixed-integer linear and nonlinear (nonconvex) programming (MILP and MINLP) problems. These problems, with a scenario based formulation, lead to large-scale MILPs/MINLPs that are well structured. The first part of the thesis proposes a new finitely convergent cross decomposition method (CD), where Benders decomposition (BD) and Dantzig-Wolfe decomposition (DWD) are combined in a unified framework to improve the solution of scenario based two-stage stochastic MILPs. This method alternates between DWD iterations and BD iterations, where DWD restricted master problems and BD primal problems yield a sequence of upper bounds, and BD relaxed master problems yield a sequence of lower bounds. A variant of CD, which includes multiple columns per iteration of DW restricted master problem and multiple cuts per iteration of BD relaxed master problem, called multicolumn-multicut CD is then developed to improve solution time. Finally, an extended cross decomposition method (ECD) for solving two-stage stochastic programs with risk constraints is proposed. In this approach, a CD approach at the first level and DWD at a second level is used to solve the original problem to optimality. ECD has a computational advantage over a bilevel decomposition strategy or solving the monolith problem using an MILP solver. The second part of the thesis develops a joint decomposition approach combining Lagrangian decomposition (LD) and generalized Benders decomposition (GBD), to efficiently solve stochastic mixed-integer nonlinear nonconvex programming problems to global optimality, without the need for explicit branch and bound search. In this approach, LD subproblems and GBD subproblems are systematically solved in a single framework. The relaxed master problem obtained from the reformulation of the original problem, is solved only when necessary. A convexification of the relaxed master problem and a domain reduction procedure are integrated into the decomposition framework to improve solution efficiency. Using case studies taken from renewable resource and fossil-fuel based application in process systems engineering, it can be seen that these novel decomposition approaches have significant benefit over classical decomposition methods and state-of-the-art MILP/MINLP global optimization solvers.

Mixed genotype Hepatitis C virus infections: incidence in Scotland and methods for detection

The diagnosis of mixed genotype hepatitis C virus (HCV) infection is rare and information on incidence in the UK, where genotypes 1a and 3 are the most prevalent, is sparse. Considerable variations in the efficacies of direct-acting antivirals (DAAs) for the HCV genotypes have been documented and the ability of DAAs to treat mixed genotype HCV infections remains unclear, with the possibility that genotype switching may occur. In order to estimate the prevalence of mixed genotype 1a/3 infections in Scotland, a cohort of 512 samples was compiled and then screened using a genotype-specific nested PCR assay. Mixed genotype 1a/3 infections were found in 3.8% of samples tested, with a significantly higher prevalence rate of 6.7% (p<0.05) observed in individuals diagnosed with genotype 3 infections than genotype 1a (0.8%). An analysis of the samples using genotypic-specific qPCR assays found that in two-thirds of samples tested, the minor strain contributed <1% of the total viral load. The potential of deep sequencing methods for the diagnosis of mixed genotype infections was assessed using two pan-genotypic PCR assays compatible with the Illumina MiSeq platform that were developed targeting the E1-E2 and NS5B regions of the virus. The E1-E2 assay detected 75% of the mixed genotype infections, proving to be more sensitive than the NS5B assay which identified only 25% of the mixed infections. Studies of sequence data and linked patient records also identified significantly more neurological disorders in genotype 3 patients. Evidence of distinctive dinucleotide expression within the genotypes was also uncovered. Taken together these findings raise interesting questions about the evolutionary history of the virus and indicate that there is still more to understand about the different genotypes. In an era where clinical medicine is frequently more personalised, the development of diagnostic methods for HCV providing increased patient stratification is increasingly important. This project has shown that sequence-based genotyping methods can be highly discriminatory and informative, and their use should be encouraged in diagnostic laboratories. Mixed genotype infections were challenging to identify and current deep sequencing methods were not as sensitive or cost-effective as Sanger-based approaches in this study. More research is needed to evaluate the clinical prognosis of patients with mixed genotype infection and to develop clinical guidelines on their treatment.

Development of Core Design Methods and Tools for Gen-IV Heavy Liquid Metal Cooled Reactors

Heavy Liquid Metal Cooled Reactors are among the concepts, fostered by the GIF, as potentially able to comply with stringent safety, economical, sustainability, proliferation resistance and physical protection requirements. The increasing interest around these innovative systems has highlighted the lack of tools specifically dedicated to their core design stage. The present PhD thesis summarizes the three years effort of, partially, closing the mentioned gap, by rationally defining the role of codes in core design and by creating a development methodology for core design-oriented codes (DOCs) and its subsequent application to the most needed design areas. The covered fields are, in particular, the fuel assembly thermal-hydraulics and the fuel pin thermo-mechanics. Regarding the former, following the established methodology, the sub-channel code ANTEO+ has been conceived. Initially restricted to the forced convection regime and subsequently extended to the mixed one, ANTEO+, via a thorough validation campaign, has been demonstrated a reliable tool for design applications. Concerning the fuel pin thermo-mechanics, the will to include safety-related considerations at the outset of the pin dimensioning process, has given birth to the safety-informed DOC TEMIDE. The proposed DOC development methodology has also been applied to TEMIDE; given the complex interdependence patterns among the numerous phenomena involved in an irradiated fuel pin, to optimize the code final structure, a sensitivity analysis has been performed, in the anticipated application domain. The development methodology has also been tested in the verification and validation phases; the latter, due to the low availability of experiments truly representative of TEMIDE's application domain, has only been a preliminary attempt to test TEMIDE's capabilities in fulfilling the DOC requirements upon which it has been built. In general, the capability of the proposed development methodology for DOCs in delivering tools helping the core designer in preliminary setting the system configuration has been proven.

La convivialità urbana nei quartieri di Milano, Bologna e Roma. Un'analisi mixed-methods sulle Social Streets

Le Social Street sono gruppi di vicini di casa che vogliono ricreare legami di convivialità avendo notato un indebolimento delle relazioni sociali nei loro quartieri. Nascono come gruppi online, tramite la piattaforma Facebook, per materializzarsi in incontri offline andando a costruire legami conviviali grazie pratiche di socialità, inclusività e gratuità. Questa Tesi ha come obiettivo l’analisi dei profili socio-demografici degli Streeter e dei quartieri coinvolti per comprendere come sia possibile creare convivialità e come la variabile urbana intervenga in questi processi. Inoltre, si vuole comprendere le dinamiche di attaccamento al quartiere, gli interessi portati avanti dagli Streeter, il loro profilo civico e il posizionamento di quest’esperienza rispetto all’associazionismo tradizionale. Per perseguire l’obiettivo della ricerca, sono state studiate le tre città che vedono la maggiore presenza di Social Street: Milano, Bologna, Roma. La ricerca ha previsto sia un’analisi degli Streeter grazie a un questionario online replicato in tutti i contesti. Inoltre, sono state realizzate 131 interviste ad amministratori e fondatori di Social Street e condotte osservazioni etnografiche e netnografiche. I risultati mostrano come gli Streeter siano appartenenti alle classi medio-alte, tra trenta e cinquanta anni, che hanno sperimentato la mobilità tra un quartiere e l’altro o tra diversi contesi nazionali ed internazionali e trovano nelle Social Street un modo per creare legami di vicinato che hanno perso nei loro trasferimenti. Gli stessi quartieri dove si diffondono le Social Street sono agiati e vi è una buona corrispondenza tra Streeter e modello della centralità sociale elaborato da Milbrath (1965) per cui anche la partecipazione civica è molto sentita tra gli aderenti alle Social Street. Il contributo di questa Tesi al dibattito sociologico risiede nell’aver offerto un’analisi empirica di un’azione collettiva a livello urbano, quella delle Social Street, mostrando come vi sia circolarità tra azione e contesto grazie all’azione mutualistica conviviale.

Evaluation Of The Effect Of Different Methods Of Microabrasion And Polishing On Surface Roughness Of Dental Enamel.

The microabrasion technique of enamel consists of selectively abrading the discolored areas or causing superficial structural changes in a selective way. In microabrasion technique, abrasive products associated with acids are used, and the evaluation of enamel roughness after this treatment, as well as surface polishing, is necessary. This in-vitro study evaluated the enamel roughness after microabrasion, followed by different polishing techniques. Roughness analyses were performed before microabrasion (L1), after microabrasion (L2), and after polishing (L3).Thus, 60 bovine incisive teeth divided into two groups were selected (n=30): G1- 37% phosphoric acid (37%) (Dentsply) and pumice; G2- hydrochloric acid (6.6%) associated with silicon carbide (Opalustre - Ultradent). Thereafter, the groups were divided into three sub-groups (n=10), according to the system of polishing: A - Fine and superfine granulation aluminum oxide discs (SofLex 3M); B - Diamond Paste (FGM) associated with felt discs (FGM); C - Silicone tips (Enhance - Dentsply). A PROC MIXED procedure was applied after data exploratory analysis, as well as the Tukey-Kramer test (5%). No statistical differences were found between G1 and G2 groups. L2 differed statistically from L1 and showed superior amounts of roughness. Differences in the amounts of post-polishing roughness for specific groups (1A, 2B, and 1C) arose, which demonstrated less roughness in L3 and differed statistically from L2 in the polishing system. All products increased enamel roughness, and the effectiveness of the polishing systems was dependent upon the abrasive used.

Classification Of Frankfurters By Ft-raman Spectroscopy And Chemometric Methods.

Frankfurters are widely consumed all over the world, and the production requires a wide range of meat and non-meat ingredients. Due to these characteristics, frankfurters are products that can be easily adulterated with lower value meats, and the presence of undeclared species. Adulterations are often still difficult to detect, due the fact that the adulterant components are usually very similar to the authentic product. In this work, FT-Raman spectroscopy was employed as a rapid technique for assessing the quality of frankfurters. Based on information provided by the Raman spectra, a multivariate classification model was developed to identify the frankfurter type. The aim was to study three types of frankfurters (chicken, turkey and mixed meat) according to their Raman spectra, based on the fatty vibrational bands. Classification model was built using partial least square discriminant analysis (PLS-DA) and the performance model was evaluated in terms of sensitivity, specificity, accuracy, efficiency and Matthews's correlation coefficient. The PLS-DA models give sensitivity and specificity values on the test set in the ranges of 88%-100%, showing good performance of the classification models. The work shows the Raman spectroscopy with chemometric tools can be used as an analytical tool in quality control of frankfurters.

Augmented Mixed Models For Clustered Proportion Data.

Often in biomedical research, we deal with continuous (clustered) proportion responses ranging between zero and one quantifying the disease status of the cluster units. Interestingly, the study population might also consist of relatively disease-free as well as highly diseased subjects, contributing to proportion values in the interval [0, 1]. Regression on a variety of parametric densities with support lying in (0, 1), such as beta regression, can assess important covariate effects. However, they are deemed inappropriate due to the presence of zeros and/or ones. To evade this, we introduce a class of general proportion density, and further augment the probabilities of zero and one to this general proportion density, controlling for the clustering. Our approach is Bayesian and presents a computationally convenient framework amenable to available freeware. Bayesian case-deletion influence diagnostics based on q-divergence measures are automatic from the Markov chain Monte Carlo output. The methodology is illustrated using both simulation studies and application to a real dataset from a clinical periodontology study.

Obtaining and stability verification of superconducting phases of the Nb-Al and Nb-Sn systems by mechanical alloying and low-temperature heat treatments

The development of Nb(3)Al and Nb(3)Sn superconductors is of great interest for the applied superconductivity area. These intermetallics composites are obtained normally by heat treatment reactions at high temperature. Processes that allow formation of the superconducting phases at lower temperatures (<1000 degrees C), particularly for Nb(3)Al, are of great interest. The present work studies phase formation and stability of Nb(3)Al and Nb(3)Sn superconducting phases using mechanical alloying (high energy ball milling). Our main objective was to form composites near stoichiometry, which could be transformed into the superconducting phases using low-temperature heat treatments. High purity Nb-Sn and Nb-Al powders were mixed to generate the required superconducting phases (Nb-25at.%Sn and Nb-25at.%Al) in an argon atmosphere glove-box. After milling in a Fritsch mill, the samples were compressed in a hydraulic uniaxial press and encapsulated in evacuated quartz tubes for heat treatment. The compressed and heat treated samples were characterized using X-ray diffractometry. Microstructure and chemical analysis were accomplished using scanning electron microscopy and energy dispersive spectrometry. Nb(3)Al XRD peaks were observed after the sintering at 800 degrees C for the sample milled for 30 h. Nb(3)Sn XRD peaks could be observed even before the heat treatment. (C) 2009 Elsevier B.V. All rights reserved.