Gel vs aceite mineral en el tratamiento del fotoenvejecimiento de manos con luz pulsada intensa

Introducción: En el tratamiento con Luz Pulsada Intensa (LPI) para el fotoenvejecimiento de las manos no se encuentran estudios que evidencien si existe alguna diferencia estadísticamente significativa en el grado de efectividad y seguridad al utilizar gel o aceite mineral como medios de acople. Objetivo: Determinar la efectividad y seguridad terapéutica en el uso de gel vs aceite mineral. Materiales y Métodos: Estudio observacional analítico de cohorte retrospectivo que involucró 29 pacientes. Realizado en tres fases; selección y recolección de las historias clínicas, evaluación fotográfica de registros pre tratamiento y pos tratamiento con determinación del grado de mejoría global en el fotoenvejecimiento de las manos por parte de tres evaluadores cegados, y análisis estadístico de los datos obtenidos por medio de las pruebas de Mann Whitney y Wilcoxon. Resultados: Se encontró mejoría dada por disminución en un grado del fotoenvejecimiento para los dos medios de acople con la misma significancia estadística. La percepción subjetiva mostró mejoría en todos los pacientes evaluados. La seguridad es similar en los dos grupos pero se evidenció mayor severidad en los efectos secundarios con el uso de aceite, con diferencias estadísticamente significativas en los efectos moderados y severos. Conclusión: La efectividad es la misma independiente del medio de acople que se use. La seguridad a pesar de evidenciar un perfil similar es mayor con el uso de gel en cuanto a la menor severidad de los efectos presentados. Se requieren más estudios de tipo ensayos clínicos controlados que permitan determinar una mayor evidencia.

Análisis prospectivo del mineral de cobre en el mundo, Latinoamérica y Colombia

Se presenta un análisis prospectivo del comportamiento de la oferta y la demanda del Mineral de Cobre en el Mundo, en Latinoamerica y en Colombia, creando diferentes escenarios con futuros posibles, consientes y detallados que servirán para entender la dinámica de mercado y la creación de estrategias de penetración, disminución de costos y aumento de productividad en compañías que operan tanto en países donde la industria del cobre se encuentra muy desarrollada, como en aquellos donde la explotación del mineral es todavía muy incipiente (Colombia).

Modeled and observed atmospheric radiation balance during the West African dry season: role of mineral dust, biomass burning aerosol, and surface albedo

The global radiation balance of the atmosphere is still poorly observed, particularly at the surface. We investigate the observed radiation balance at (1) the surface using the ARM Mobile Facility in Niamey, Niger, and (2) the top of the atmosphere (TOA) over West Africa using data from the Geostationary Earth Radiation Budget (GERB) instrument on board Meteosat-8. Observed radiative fluxes are compared with predictions from the global numerical weather prediction (NWP) version of the Met Office Unified Model (MetUM). The evaluation points to major shortcomings in the NWP model's radiative fluxes during the dry season (December 2005 to April 2006) arising from (1) a lack of absorbing aerosol in the model (mineral dust and biomass burning aerosol) and (2) a poor specification of the surface albedo. A case study of the major Saharan dust outbreak of 6–12 March 2006 is used to evaluate a parameterization of mineral dust for use in the NWP models. The model shows good predictability of the large-scale flow out to 4–5 days with the dust parameterization providing reasonable dust uplift, spatial distribution, and temporal evolution for this strongly forced dust event. The direct radiative impact of the dust reduces net downward shortwave (SW) flux at the surface (TOA) by a maximum of 200 W m−2 (150 W m−2), with a SW heating of the atmospheric column. The impacts of dust on terrestrial radiation are smaller. Comparisons of TOA (surface) radiation balance with GERB (ARM) show the “dusty” forecasts reduce biases in the radiative fluxes and improve surface temperatures and vertical thermodynamic structure.

The spatial prediction of soil mineral N and potentially available N using elevation

The precision farmer wants to manage the variation in soil nutrient status continuously, which requires reliable predictions at places between sampling sites. Ordinary kriging can be used for prediction if the data are spatially dependent and there is a suitable variogram model. However, even if data are spatially correlated, there are often few soil sampling sites in relation to the area to be managed. If intensive ancillary data are available and these are coregionalized with the sparse soil data, they could be used to increase the accuracy of predictions of the soil properties by methods such as cokriging, kriging with external drift and regression kriging. This paper compares the accuracy of predictions of the plant available N properties (mineral N and potentially available N) for two arable fields in Bedfordshire, United Kingdom, from ordinary kriging, cokriging, kriging with external drift and regression kriging. For the last three, intensive elevation data were used with the soil data. The mean squared errors of prediction from these methods of kriging were determined at validation sites where the values were known. Kriging with external drift resulted in the smallest mean squared error for two of the three properties examined, and cokriging for the other. The results suggest that the use of intensive ancillary data can increase the accuracy of predictions of soil properties in arable fields provided that the variables are related spatially. (c) 2005 Elsevier B.V. All rights reserved.

Have increased dissolved organic carbon (DOC) losses from UK peat and organo-mineral soils been driven by the decline in acid rain?

Dissolved organic carbon (DOC) concentrations have been rising in streams and lakes draining catchments with organic soils across Northern Europe. These increases have shown a correlation with decreased sulphate and chloride concentrations. One hypothesis to explain this phenomenon is that these relationships are due an increased in DOC release from soils to freshwaters, caused by a decline in pollutant sulphur and sea-salt deposition. We carried out controlled deposition experiments in the laboratory on intact peat and organomineral O-horizon cores to test this hypothesis. Preliminary data showed a clear correlation between the change in soil water pH and change in DOC concentrations, however uncertainty still remains about whether this is due to changes in biological activity or chemical solubility.

Phylogenetic variation in the shoot mineral concentration of angiosperms

The calcium (Ca) concentration of plant shoot tissues varies systematically between angiosperm orders. The phylogenetic variation in the shoot concentration of other mineral nutrients has not yet been described at an ordinal level. The aims of this study were (1) to quantify the shoot mineral concentration of different angiosperm orders, (2) to partition the phylogenetic variation in shoot mineral concentration between and within orders, (3) to determine if the shoot concentration of different minerals are correlated across angiosperm species, and (4) to compare experimental data with published ecological survey data on 81 species sampled from their natural habitats. Species, selected pro rata from different angiosperm orders, were grown in a hydroponic system under a constant external nutrient regime. Shoots of 117 species were sampled during vegetative growth. Significant variation in shoot carbon (C), calcium (Ca), potassium (K), and magnesium (Mg) concentration occurred between angiosperm orders. There was no evidence for systematic differences in shoot phosphorus (P) or organic-nitrogen (N) concentration between orders. At a species level, there were strong positive correlations between shoot Ca and Mg concentration, between shoot P and organic-N concentration, and between shoot K concentration and shoot fresh weight:dry weight ratio. Shoot C and cation concentration correlated negatively at a species level. Species within the Poales and the Caryophyllales had distinct shoot mineralogies in both the designed experiment and in the ecological survey.

Organic soils promote the efficacy of entomopathogenic nematodes, with different foraging strategies, in the control of a major forest pest: a meta-analysis of field trial data

The large pine weevil, Hylobius abietis, is a serious pest of reforestation in northern Europe. However, weevils developing in stumps of felled trees can be killed by entomopathogenic nematodes applied to soil around the stumps and this method of control has been used at an operational level in the UK and Ireland. We investigated the factors affecting the efficacy of entomopathogenic nematodes in the control of the large pine weevil spanning 10 years of field experiments, by means of a meta-analysis of published studies and previously unpublished data. We investigated two species with different foraging strategies, the ‘ambusher’ Steinernema carpocapsae, the species most often used at an operational level, and the ‘cruiser’ Heterorhabditis downesi. Efficacy was measured both by percentage reduction in numbers of adults emerging relative to untreated controls and by percentage parasitism of developing weevils in the stump. Both measures were significantly higher with H. downesi compared to S. carpocapsae. General linear models were constructed for each nematode species separately, using substrate type (peat versus mineral soil) and tree species (pine versus spruce) as fixed factors, weevil abundance (from the mean of untreated stumps) as a covariate and percentage reduction or percentage parasitism as the response variable. For both nematode species, the most significant and parsimonious models showed that substrate type was consistently, but not always, the most significant variable, whether replicates were at a site or stump level, and that peaty soils significantly promote the efficacy of both species. Efficacy, in terms of percentage parasitism, was not density dependent.

Comparing performance of instrumental drift correction by linear and quadratic adjusting in inductive electromagnetic data

Electromagnetic induction (EMI) method results are shown for vertical magnetic dipole (VMD) configuration by using the EM38 equipment. Performance in the location of metallic pipes and electrical cables is compared as a function of instrumental drift correction by linear and quadratic adjusting under controlled conditions. Metallic pipes and electrical cables are buried at the IAG/USP shallow geophysical test site in Sao Paulo City. Brazil. Results show that apparent electrical conductivity and magnetic susceptibility data were affected by ambient temperature variation. In order to obtain better contrast between background and metallic targets it was necessary to correct the drift. This correction was accomplished by using linear and quadratic relation between conductivity/susceptibility and temperature intending comparative studies. The correction of temperature drift by using a quadratic relation was effective, showing that all metallic targets were located as well deeper targets were also improved. (C) 2010 Elsevier B.V. All rights reserved.

Conflicting structural and geochronological data from the Ibituruna quartz-syenite (SE Brazil): Effect of protracted ""hot"" orogeny and slow cooling rate?

The Ibituruna quartz-syenite was emplaced as a sill in the Ribeira-Aracuai Neoproterozoic belt (Southeastern Brazil) during the last stages of the Gondwana supercontinent amalgamation. We have measured the Anisotropy of Magnetic Susceptibility (AMS) in samples from the Ibituruna sill to unravel its magnetic fabric that is regarded as a proxy for its magmatic fabric. A large magnetic anisotropy, dominantly due to magnetite, and a consistent magnetic fabric have been determined over the entire Ibituruna massif. The magmatic foliation and lineation are strikingly parallel to the solid-state mylonitic foliation and lineation measured in the country-rock. Altogether, these observations suggest that the Ibituruna sill was emplaced during the high temperature (similar to 750 degrees C) regional deformation and was deformed before full solidification coherently with its country-rock. Unexpectedly, geochronological data suggest a rather different conclusion. LA-ICP-MS and SHRIMP ages of zircons from the Ibituruna quartz-syenite are in the range 530-535 Ma and LA-ICP-MS ages of zircons and monazites from synkinematic leucocratic veins in the country-rocks suggest a crystallization at similar to 570-580 Ma, i.e., an HT deformation >35My older than the emplacement of the Ibituruna quartz-syenite. Conclusions from the structural and the geochronological studies are therefore conflicting. A possible explanation arises from (40)Ar-(39)Ar thermochronology. We have dated amphiboles from the quartz-syenite, and amphiboles and biotites from the country-rock. Together with the ages of monazites and zircons in the country-rock, (40)Ar-(39)Ar mineral ages suggest a very low cooling rate: <3 degrees C/My between 570 and similar to 500 Ma and similar to 5 degrees C/My between 500 and 460 Ma. Assuming a protracted regional deformation consistent over tens of My, under such stable thermal conditions the fabric and microstructure of deformed rocks may remain almost unchanged even if they underwent and recorded strain pulses separated by long periods of time. This may be a characteristic of slow cooling ""hot orogens"" that rocks deformed at significantly different periods during the orogeny, but under roughly unchanged temperature conditions, may display almost indiscernible microstructure and fabric. (C) 2009 Elsevier B.V. All rights reserved.

Crystal structure of the (Mg,Fe)[UO2(P,As)O-4](2) center dot 10H(2)O solid solution - A novel mineral variety of saleeite

The crystal structure of a novel variety {[(Mg0.81Fe0.19)(H2O)(6)](H2O)(4)}{(UO2)[(P0.67As0.33)O-4]}(2) of the mineral saleeite is determined using X-ray diffraction (Bruker Smart diffractometer, lambda MoK alpha, graphite monochromator, 2 theta(max) = 56.62 degrees, R = 0.0321 for 2317 reflections, T = 100 K). The main crystal data are as follows: a = 6.952(6) angstrom, b = 19.865(5) , angstrom, c = 6.969(2) angstrom, beta = 90.806(4)degrees, space group P12(l)/n1, Z = 2, and P-calcd = 3.34 g/cm(3). It is shown that the structure is formed by alternating (along the [010] direction) anionic layers, which are composed of uranium bipyramids and T(P,As) tetrahedra, and cation layers consisting of M(Mg, Fe) octahedra and water molecules, which are joined through a system of asymmetric hydrogen bonds. The hydrogen atoms are located, the scheme of hydrogen bonds is established, and their geometric characteristics are calculated.

THE CRYSTAL STRUCTURE OF A MICROLITE-GROUP MINERAL WITH A FORMULA NEAR NaCaTa(2)O(6)F FROM THE MORRO REDONDO MINE, CORONEL MURTA, MINAS GERAIS, BRAZIL

We present electron-microprobe and single-crystal X-ray-diffraction data for a microlite-group mineral with a formula near NaCaTa(2)O(6)F from the Morro Redondo mine, Coronel Murta, Minas Gerais, Brazil. On the basis of these data, the formula is A(Na(0.88)Ca(0.88)Pb(0.02)square(0.22))(Sigma 2.00) (B)(Ta(1.70)Nb(0.14)Si(0.12)As(0.04))(Sigma 2.00) (X)[(O(5.75)(OH)(0.25)](Sigma 6.00) (Y)(F(0.73)square(0.27))(Sigma 1.00). According to the new nomenclature for the pyrochlore-supergroup minerals, it is intermediate between fluornatromicrolite and "" fluorcalciomicrolite"". The crystal structure, F (d3) over barm, a = 10.4396(12) angstrom, has been refined to an R(1) value of 0.0258 (wR(2) = 0.0715) for 107 reflections (MoK alpha radiation). There is a scarcity of crystal-chemical data for pyrochlore-supergroup minerals in the literature. A compilation of these data is presented here.

Optimization of MLP parameters on mineral potential mapping tasks

Mineral potential mapping is the process of combining a set of input maps, each representing a distinct geo-scientific variable, to produce a single map which ranks areas according to their potential to host deposits of a particular type. The maps are combined using a mapping function which must be either provided by an expert (knowledge-driven approach), or induced from sample data (data-driven approach). Current data-driven approaches using multilayer perceptrons (MLPs) to represent the mapping function have several inherent problems: they rely heavily on subjective judgment in selecting training data and are highly sensitive to this selection; they do not utilize the contextual information provided by unlabeled data; and, there is no objective interpretation of the values output by the MLP. This paper presents a novel approach which overcomes these three problems.

Comparison of MLP and Bayesian approaches on mineral prospectivity mapping tasks

Mineral Prospectivity Mapping is the process of combining maps containing different geoscientific data sets to produce a single map depicting areas ranked according to their potential to host mineral deposits of a particular type. This paper outlines two approaches for deriving a function which can be used to assign to each cell in the study area a value representing the posterior probability that the cell contains a deposit of the sought-after mineral. One approach is based on estimating probability density functions (pdfs); the second uses multilayer perceptrons (MLPs). Results are provided from applying these approaches to geoscientific datasets covering a region in North Western Victoria, Australia. The results demonstrate that while both the Bayesian approach and the MLP approach yield similar results when the number of input dimensions is small, the Bayesian approach rapidly becomes unstable as the number of input dimensions increases, with the resulting maps displaying high sensitivity to the number of mixtures used to model the distributions. However, despite the fact that Bayesian assigned values cannot be interpreted as posterior probabilities in high dimensional input spaces, the pixel favorability rankings produced by the two methods is similar.

Pregnancy and lactation have no long-term deleterious effect on measures of bone mineral in healthy women: a twin study

BACKGROUND: The long-term effects of pregnancy and lactation on measures of bone mineral in women remain unclear.

OBJECTIVE: We studied whether pregnancy or lactation has deleterious long-term effects on bone mineral in healthy women.

DESIGN: We measured bone mineral density (BMD; g/cm(2)) in women aged > or = 18 y. Analyses were performed on 3 data sets: study 1, 83 female twin pairs (21 monozygous and 62 dizygous) aged (x +/- SD) 42.2 +/- 15.5 y who were discordant for ever having been pregnant beyond 20 wk; study 2, 498 twin pairs aged 42.3 +/- 15.0 y; and study 3, 1354 individual twins, their siblings, and family members.

RESULTS: In study 1, there were no significant within-pair differences in unadjusted BMD or BMD adjusted for age, height, and fat mass at the lumbar spine or total-hip or in total-body bone mineral content (BMC; kg) (paired t tests). In study 2, there was no significant within-pair difference in measures of bone mineral or body composition related to the within-pair difference in number of pregnancies. In study 3, subjects with 1 or 2 (n = 455) and > or = 3 pregnancies (n = 473) had higher adjusted lumbar spine BMD (2.9% and 3.8%, respectively; P = 0.001) and total-body BMC (2.2% and 3.1%; P < 0.001) than did nulliparous women (n = 426). Parous women who breast-fed had higher adjusted total-body BMC (2.6%; P = 0.005), total-hip BMD (3.2%; P = 0.04), and lower fat mass (10.9%; P = 0.01) than did parous non-breast-feeders.

CONCLUSION: We found no long-term detrimental effect of pregnancy or breast-feeding on bone mineral measures.

Depression and bone mineral density in a community sample of men : Geelong Osteoporosis Study

Background : Previous research in psychiatric and community samples has demonstrated reduced bone mineral density (BMD) in individuals with both clinical depression and depressive symptoms, although the findings are equivocal. This study aimed to investigate the association between self-reported depression and BMD in a community sample of men aged 20–96 years enrolled in the Geelong Osteoporosis Study.

Methods : A self-report questionnaire based on DSM-IV criteria was used to determine lifetime prevalence rates of depression within the study sample at baseline. Those currently taking oral glucocorticoids, testosterone or bisphosphonates were excluded from the analysis (n = 23) resulting in a sample of 1279 men.

Results : In this sample, 155 men reported a lifetime history of depression (LHX). There were no differences in age, weight, height, calcium intake, smoking rates or unadjusted BMD at the femoral neck between the cases and the controls, whereas unadjusted BMD at the spine was significantly lower in those with a LHX (1.254 ± 0.187 vs 1.293 ± 0.194 g/cm2). BMD adjusted for age, weight, calcium intake and smoking was 3.6% lower at the spine (1.255 ± 0.016 vs 1.295 ± 0.006 g/cm2) and 3.4% lower at the femoral neck (0.973 ± 0.011 vs 1.007 ± 0.004 g/cm2) in those with a LHX compared to controls.

Conclusion : These data are consistent with previous findings of diminished BMD in people with depressive disorders and symptoms and suggest that depression may be a risk factor for reduced BMD in community-dwelling adult men.