994 resultados para diluted magnetic semiconductor nanowire
Resumo:
Conductive AFM and in situ methods were used to determine contact resistance and resistivity of individual Sb2S3 nanowires. Nanowires were deposited on oxidized Si surface for in situ measurements and on Si surface with macroelectrodes for conductive AFM (C-AFM) measurements. Contact resistance was determined by measurement of I(V) characteristics at different distances from the nanowire contact with the macroelectrode and resistivity of nanowires was determined. Sb2S3 is a soft material with low adhesion force to the surface and therefore special precautions were taken during measurements.
Resumo:
The semiconductor nanowire has been widely studied over the past decade and identified as a promising nanotechnology building block with application in photonics and electronics. The flexible bottom-up approach to nanowire growth allows for straightforward fabrication of complex 1D nanostructures with interesting optical, electrical, and mechanical properties. III-V nanowires in particular are useful because of their direct bandgap, high carrier mobility, and ability to form heterojunctions and have been used to make devices such as light-emitting diodes, lasers, and field-effect transistors. However, crystal defects are widely reported for III-V nanowires when grown in the common out-of-plane <111>B direction. Furthermore, commercialization of nanowires has been limited by the difficulty of assembling nanowires with predetermined position and alignment on a wafer-scale. In this thesis, planar III-V nanowires are introduced as a low-defect and integratable nanotechnology building block grown with metalorganic chemical vapor deposition. Planar GaAs nanowires grown with gold seed particles self-align along the <110> direction on the (001) GaAs substrate. Transmission electron microscopy reveals that planar GaAs nanowires are nearly free of crystal defects and grow laterally and epitaxially on the substrate surface. The nanowire morphology is shown to be primarily controlled through growth temperature and an ideal growth window of 470 +\- 10 °C is identified for planar GaAs nanowires. Extension of the planar growth mode to other materials is demonstrated through growth of planar InAs nanowires. Using a sacrificial layer, the transfer of planar GaAs nanowires onto silicon substrates with control over the alignment and position is presented. A metal-semiconductor field-effect transistor fabricated with a planar GaAs nanowire shows bulk-like low-field electron transport characteristics with high mobility. The aligned planar geometry and excellent material quality of planar III-V nanowires may lead to highly integrated III-V nanophotonics and nanoelectronics.
Resumo:
Nanocrystalline Zn0.95 - xNi0.05AlxO (x = 0.01, 0.02, 0.05 and 0.10) diluted magnetic semiconductors have been synthesized by an auto-combustion method. X-ray diffraction measurements indicate that all Al-doped Zn0.95Ni0.05O samples have the pure wurtzite structure. Transmission electron microscope analyses show that the as-synthesized powders are of the size 40 - 45 nm. High-resolution transmission electron microscope, energy dispersive spectrometer and X-ray photoemission spectroscope analyses indicate that Ni2+ and Al3+ uniformly substitute Zn2+ in the wurtzite structure without forming any secondary phases. The Al doping concentration dependences of cell parameters (a and c), resistance and the ratio of green emission to UV emission have the similar trends. (c) 2007 Elsevier B.V. All rights reserved.
Resumo:
Nanocrystalline Zn0.95-xCo0.05AlxO (x=0, 0.01, 0.05) diluted magnetic semiconductors have been synthesized by an auto-combustion method. X-ray diffraction measurements indicated that Al-doped Zn0.95Co0.05O samples had the pure wurtzite structure. X-ray absorption spectroscopy, high-resolution transmission electron microscope, energy dispersive spectrometer and Co 2p core-level photoemission spectroscope analyses indicated that Co2+ substituted for Zn2+ without forming any secondary phases or impurities. Resistance measurements showed that the resistance values of Co and Al codoped samples were still so large in the giga magnitude. Magnetic investigations showed that nanocrystalline Al-doped Zn0.95Co0.05O samples had no indication of room temperature ferromagnetism. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
We report that, by linearly polarized pumping of different wavelengths, Kerr transients appear at zero magnetic field only in the case when GaMnAs samples are initialized at 3 K by first applying a 0.8 Tesla field and then returning to zero field. We find that, instead of magnetization precession, the near-band gap excitation induces a coherent out-of-plane turning of magnetization, which shows very long relaxation dynamics with no precession. When photon energy increases, the peak value of the Kerr transient increases, but it decays rapidly to the original slow transient seen under the near-band-gap excitation.
Resumo:
We present a study of magnetic anisotropy by using magneto-transport and direct magnetization measurements on tensile strained (Ga,Mn)As films. The magnetic easy axis of the films is in-plane at low temperatures, while the easy axis flips to out-of-plane when temperature is raised or hole concentration is increased. This easy axis reorientation is explained qualitatively in a simple physical picture by Zeners pd model. In addition, the magneto-crystalline anisotropic resistance was also investigated experimentally and theoretically based on the single magnetic domain model. The dependence of sheet resistance on the angle between the magnetic field and [1 0 0] direction was measured. It is found that the magnetization vector M in the single-domain state deviates from the external magnetic field H direction at low magnetic field, while for high magnetic field, M continuously moves following the field direction, which leads to different resistivity function behaviors.
Resumo:
Using first-principles methods, we systematically study the mechanism of defect formation and electronic structures for 3d transition-metal impurities (V, Cr, Mn, Fe, and Co) doped in silicon nanowires. We find that the formation energies of 3d transition-metal impurities with electrons or holes at the defect levels always increase as the diameters of silicon nanowires decrease, which suggests that self-purification, i.e., the difficulty of doping in silicon nanowires, should be an intrinsic effect. The calculated results show that the defect formation energies of Mn and Fe impurities are lower than those of V, Cr, and Co impurities in silicon nanowires. It indicates that Mn and Fe can easily occupy substitutional site in the interior of silicon nanowires. Moreover, they have larger localized moments, which means that they are good candidates for Si-based dilute magnetic semiconductor nanowires. The doping of Mn and Fe atom in silicon nanowires introduces a pair of energy levels with t(2) symmetry. One of which is dominated by 3d electrons of Mn or Fe, and the other by neighboring dangling bonds of Si vacancies. In addition, a set of nonbonding states localized on the transition-metal atom with e symmetry is also introduced. (C) 2008 American Institute of Physics. [DOI: 10.1063/1.3000445]
Resumo:
The electronic structure and Lande electron g-factors of manganese-doped HgTe quantum spheres are investigated, in the framework of the eight-band effective-mass model and the mean-field approximation. It is found that the electronic structure evolves continuously from the zero-gap configuration to an open-gap configuration with decreasing radius. The size dependence of electron g-factors is calculated with different Mn-doped effective concentration, magnetic field, and temperature values, respectively. It is found that the variations of electron g-factors are quite different for small and large quantum spheres, due to the strong exchange-induced interaction and spin-orbit coupling in the narrow-gap DMS nanocrystals. The electron g-factors are zero at a critical point of spherical radius R-c; however, by modulating the nanocrystal size their absolute values can be turned to be even 400 times larger than those in undoped cases. Copyright (c) EPLA, 2008.
Resumo:
Nonpolar GaN Mn films have been fabricated by implanting Mn-ion into nonpolar a-plane (MO) GaN films at room temperature. The influence of implantation energy on the Structural, morphological and magnetic characteristics of samples have been investigated by means of stopping and range of ions in matter (SRIM) Simulation software, high-resolution X-ray diffraction (HRXRD), atomic force microscopy (AFM), and superconducting quantum interference device (SQUID). According to the SQUID analysis, obvious room temperature ferromagnetic properties of samples were detected. Moreover, the implantation energy has little impact on the ferromagnetic properties of samples. The XRD and AFM analyses show that the structural and morphological characteristics of samples were severely deteriorated with the increase of implantation energy. (C) 2008 Elsevier B.V. All rights reserved.
Resumo:
We deduce the eight-band effective-mass Hamiltonian model for a manganese-doped ZnSe quantum sphere in the presence of the magnetic field, including the interaction between the conduction and valence bands, the spin-orbit coupling within the valence bands, the intrinsic spin Zeeman splitting, and the sp-d exchange interaction between the carriers and magnetic ion in the mean-field approximation. The size dependence of the electron and hole energy levels as well as the giant Zeeman splitting energies are studied theoretically. We find that the hole giant Zeeman splitting energies decrease with the increasing radius, smaller than that in the bulk material, and are different for different J(z) states, which are caused by the quantum confinement effect. Because the quantum sphere restrains the excited Landau states and exciton states, in the experiments we can observe directly the Zeeman splitting of basic states. At low magnetic field, the total Zeeman splitting energy increases linearly with the increasing magnetic field and saturates at modest field which is in agreement with recent experimental results. Comparing to the undoped case, the Zeeman splitting energy is 445 times larger which provides us with wide freedom to tailor the electronic structure of DMS nanocrystals for technological applications.
Resumo:
The diluted magnetic semiconductors (DMSs) were achieved by the ion implantation. Fe+ ions (250 keV) were implanted into n-type GaN at room temperature with doses ranging from 8 X 10(15) cm(-2) to 8 X 10(16) cm(-2) and subsequently rapidly annealed at 800 degrees C for 5 m in N-2 ambient. PIXE was employed to determine the Fe-implanted content. The magnetic property was measured by the Quantum Design MPMS SQUID magnetometer. No secondary phases or clusters are detected within the sensitivity of XRD. Apparent ferromagnetic hysteresis loops measured at 10 K were presented. The relationships between the Fe-implanted content and the ferromagnetic property are discussed. (c) 2006 Elsevier B.V. All rights reserved.
Resumo:
Mn-doped Si films were prepared on Si(001) substrates by magnetron cosputtering and post-annealing process. The structural, morphological and magnetic properties of the films have been investigated. X-ray diffraction results show that the as-prepared film is amorphous. By annealing at 800 degrees C, however, the film is crystallized. There is no secondary phase found except Si in the two films. Chemical mapping shows that no segregation of the Mn atoms appears in the annealed film. Atomic force microscopy images of the films indicate that the annealed film has a granular feature that covers uniformly the film surface while there is no such kind of characteristic in the as-prepared film. The field dependence of magnetization was measured using an alternating gradient magnetometer, and it has been indicated that the annealed film shows room-temperature ferromagnetism. (c) 2006 Elsevier B.V. All rights reserved.
Resumo:
The (Ga,Mn,N) samples were grown by the implantation of low-energy Mn ions into GaN/Al2O3 substrate at different elevated substrate temperatures with mass-analyzed low-energy dual ion beam deposition system. Auger electron spectroscopy depth profile of samples grown at different substrate temperatures indicates that the Mn ions reach deeper in samples with higher substrate temperatures. Clear X-ray diffraction peak from (Ga,Mn)N is observed in samples grown at the higher substrate temperature. It indicates that under optimized substrate temperature and annealing conditions the solid solution (Ga,Mn)N phase in samples was formed with the same lattice structure as GaN and different lattice constant. (C) 2003 Elsevier Science B.V. All rights reserved.
Resumo:
本论文利用溶胶一凝胶法和水热法制备了不同离子(Eu~3+,Sm~3+,Mn~2+,Fe~3+,Co~2+,Ni~2+)作为磁性杂质的ZnO基稀磁半导体,并系统地研究了材料的薄膜、粉末和纳米结构的结晶特性、结构形态和光、电、磁性质。溶胶一凝胶法制备的薄膜的晶体为c轴取向生长的六方纤维锌矿结构。薄膜的取向生长受烧结气氛、烧结温度和掺杂离子浓度的影响,其中烧结气氛是影响薄膜取向生长的最直接、最显著因素。随着烧结气氛中氧含量的减小,薄膜的沿c轴生长的趋势加强。此外,烧结温度的提高也增强薄膜沿c轴生长的趋势,但掺杂离子浓度的增加却抑制薄膜的c轴取向生长特性。通过薄膜表面形态的研究发现,在空气中烧结的薄膜由立方晶粒构成,而在真空中烧结的样品则由不规则的片状晶粒组成。组成薄膜的多晶颗粒粒径小于10Onm,15层薄膜的膜厚为357-366nm。掺杂离子在薄膜中均匀分布,成膜过程不改变掺杂离子(Eu3+,Sm3+,Mn2+,Fe3+,Co2+,Ni2+)和基质离子(Zn2+和O2-)的价态。 不同Eu3+掺杂浓度的ZnO薄膜样品的吸收光谱的吸收边出现在363nm和368nm之间,对应半导体材料的禁带宽度Eg=3.42~3.40ev。由于Eu3+改变了薄膜的表面性质,Zn1-xEux(0.005≤x≤0.15)薄膜在可见光区出现了一系列干涉带。Zn1-xTMxO薄膜的吸收光谱的吸收边位置出现在356nm-369nm,对应半导体的禁带宽度为3.34-3.46eV,在可见光区发现了Co2+的电子的d-d跃迁引起的吸收带。随着掺杂浓度的增加,薄膜的透光率逐渐减小。Zn1-xCoxO薄膜在近紫外与可见光区的透光率都在60%以上,Zn1-xEuxO薄膜的透光率则高达90%。在Zn1-xEuxO薄膜的激发发射光谱中,以613nm作为监控波长,激发光谱除了检测到Eu3+的7F→5D能级的吸收跃迁外,还检测到最大值位于378nm附近的ZnO的吸收带。以394nm为激发波长,发射光谱检测到Eu3+的5D0→7FJ(J=1,2,3,4)跃迁。以zno的带隙能量378nm作为激发波长进行激发,检测到Eu3+的5D0→7F2跃迁,说明基质zno和E矿十之间存在能量交换。薄膜磁性测试在4-400K温度范围内进行,发现在此温度范围内Zn0.9Eu0.1O薄膜表现居里一外斯顺磁性;在低温区,存在磁性增强现象。zno.gCoo.IO薄膜在23oK以下表现为铁磁性,200K的M-H曲线显示薄膜的剩磁(Br)约为0.21em侧g,矫顽力(Hc)约为327Oe。但Zn0.9Mn0.1O,Zn0.9Ni0.1O,Zn0.9Co0.1O薄膜的磁性测试则显示在80K以上三种薄膜均表现为顺磁性。Zn0.9Eu0.1O薄膜的电阻呈现典型的半导体性质,在ZT的磁场下,薄膜在110K获得最大14.53%的磁阻率。Zn1-xTMxO薄膜的电阻也表现典型的半导体特性,实验研究了薄膜在不同掺杂离子浓度、外加磁场以及温度条件下的磁阻性质。粉末样品中磁性离子的掺杂浓度均小于薄膜样品。Co,Fe,Ni,Mn掺杂的Zn1-xTMxO粉末在80以上均为顺磁性。在Co2+掺杂的粉末样品中没有发现类似于薄膜样品的铁磁性,说明DMS的磁性与制备条件关系密切。实验证明了利用sol-gel方法,Zno:TM稀磁半导体能够有效地组装在MCM-41和AAO的孔道内。ZnO:TM材料组装进在MCM-41孔道后,不改变孔道的六方结构但使孔径变小。随着组装次数的增加,MCM-41的孔径和孔容累进减小。组装在AAo模板孔道内的材料呈单分散纳米颗粒状态,颗粒粒径小于loonm。组装材料的磁性测试显示:组装在MCM-41内的Zn0.9Co0.1O材料在80K-30OK呈现超顺磁性。而Mn,Fe,Ni掺杂的Zno在此温度范围内表现顺磁性。组装在AAO内的ZnO:TM(TM=Mn,Fe,Co,Ni)材料在SOK-30OK温度范围内都呈现顺磁性。在水热法合成ZnO:A(A=Bu,Sm,co)纳米粒子的过程中,发现反应温度、压力、时间和溶液浓度等因素只影响Znl.xCoxO纳米粒子的的产量,而溶液的酸度却影响产物的形貌。控制溶液的酸度,可以控制产物的形貌从粒状向棒状转变。当溶液的PH=5时,在甲醇:水体系中可以水热合成规则的棒状ZnO:RE(RE=Eu,Sm)纳米晶。所得到的Zn0.98Co0.02O纳米晶在80K呈超顺磁行为,而ZnO:RE(RE=Eu,Sm)纳米晶在80K则表现较弱的顺磁性。 实验通过控制水热条件,制备了一种新型结构的柠檬酸锌晶体。由于利用了水热反应的非平衡合成条件,所得到的晶体的层状结构不同于目前已知的所有柠檬酸配合物的离散型分子结构。单晶衍射结果表明:化合物是一个由八面体和一个非对称单元交替相连构成的二维层状结构。
Resumo:
The magnetic properties of Mn-doped ZnO (ZnO:Mn) nanorods grown by hydrothermal process at a temperature of 200 8C and a growth time of 3 h have been studied. The samples were characterized by using powder X-ray diffraction with Rietveld refinement, scanning electron microscopy, energy-dispersive X-ray analysis and SQUID magnetometry. Mn (3 wt%) and (5 wt%)-doped ZnO samples exhibit paramagnetic and ferromagnetic behavior, respectively, at room temperature. The spin-glass behavior is observed from the samples with respect to the decrease of temperature. At 10 K, both samples exhibit a hysteresis loop with relatively low coercivity. The room-temperature ferromagnetism in 5 wt% Mn-doped ZnO nanorods is attributed to the increase in the specific area of grain boundaries, interaction between dopant Mn2þ ions substituted at Zn2þ site and the interaction between Mn2þ ions and Zn2þ ions from the ZnO host lattice