Análise do sistema de tratamento de efluentes gasosos de uma central de valorização energética de resíduos sólidos urbanos

Trabalho Final de Mestrado para obtenção do grau de Mestre Em Engenharia Química e Biológica Ramo de processos Químicos

Changes in the Structure of a Nigerian Soil under Different Land Management Practices

Quantification of soil physical quality (SPQ) and pore size distribution (PSD) can assist understanding of how changes in land management practices influence dynamics of soil structure, and this understanding could greatly improve the predictability of soil physical behavior and crop yield. The objectives of this study were to measure the SPQ index under two different land management practices (the continuous arable cropping system and natural bush fallow system), and contrast the effects of these practices on the structure of PSD using soil water retention data. Soil water retention curves obtained from a pressure chamber were fitted to van Genuchten’s equation, setting m (= 1-1/n). Although values for soil bulk density were high, soils under the continuous arable cropping system had good SPQ, and maintained the capacity to support root development. However, soils under the natural bush fallow system had a worse structure than the continuous arable system, with restrictions in available water capacity. These two management systems had different PSDs. Results showed the inferiority of the natural bush fallow system with no traffic restriction (which is the common practice) in relation to the continuous arable cropping system in regard to physical quality and structure.

Retrofit Methods for Distortion Cracking Problems in Plate Girder Bridges, TR-436, 2003

This report is formatted to independently present four individual investigations related to similar web gap fatigue problems. Multiple steel girder bridges commonly exhibit fatigue cracking due to out-of-plane displacement of the web near the diaphragm connections. This fatigue-prone web gap area is typically located in negative moment regions of the girders where the diaphragm stiffener is not attached to the top flange. In the past, the Iowa Department of Transportation has attempted to stop fatigue crack propagation in these steel girder bridges by drilling holes at the crack tips. Other nondestructive retrofits have been tried; in a particular case on a two-girder bridge with floor beams, angles were bolted between the stiffener and top flange. The bolted angle retrofit has failed in the past and may not be a viable solution for diaphragm bridges. The drilled hole retrofit is often only a temporary solution, so a more permanent and effective retrofit is required. A new field retrofit has been developed that involves loosening the bolts in the connection between the diaphragm and the girders. Research on the retrofit has been initiated; however, no long-term studies of the effects of bolt loosening have been performed. The intent of this research is to study the short-term effects of the bolt loosening retrofit on I-beam and channel diaphragm bridges. The research also addressed the development of a continuous remote monitoring system to investigate the bolt loosening retrofit on an X-type diaphragm bridge over a number of months, ensuring that the measured strain and displacement reductions are not affected by time and continuous traffic loading on the bridge. The testing for the first three investigations is based on instrumentation of web gaps in a negative moment region on Iowa Department of Transportation bridges with I-beam, channel, and X-type diaphragms. One bridge of each type was instrumented with strain gages and deflection transducers. Field tests, using loaded trucks of known weight and configuration, were conducted on the bridges with the bolts in the tight condition and after implementing the bolt loosening retrofit to measure the effects of loosening the diaphragm bolts. Long-term data were also collected on the X-diaphragm bridge by a data acquisition system that collected the data continuously under ambient truck loading. The collected data were retrievable by an off-site modem connection to the remote data acquisition system. The data collection features and ruggedness of this system for remote bridge monitoring make it viable as a pilot system for future monitoring projects in Iowa. Results indicate that loosening the diaphragm bolts reduces strain and out-of-plane displacement in the web gap, and that the reduction is not affected over time by traffic or environmental loading on the bridge. Reducing the strain in the web gap allows the bridge to support more cycles of loading before experiencing fatigue, thus increase the service life of the bridge. Two-girder floor beam bridges may also exhibit fatigue cracking in girder webs.

Internet-palveluntarjoajan luotettava autentikointijärjestelmä

Internet-palveluntarjoaja haluaa tarjota palveluitaan vain omille asiakkailleen. Niinpä Internetin käyttäjien autentikointi on tärkeä osa Internet-palveluntarjoajan kokonaisjärjestelmässä. Jopa asiakkaiden laskutus saattaa perustua luotettavaan autentikointiin. Internet-palveluntarjoajan autentikointijärjestelmä perustuu usein AAA-malliin, joka pitää sisällään käyttäjien autentikoinnin, auktorisoinnin ja käyttötilastojen keräämisen. Tässä työssä esitellään AAA-mallia ja autentikointijärjestelmään läheisesti liittyviä muita teknologioita. Työn käytännön osassa tutustutaan Internet-palveluntarjoajan AAA-ohjelmiston uusimiseen. Tuloksena oli tulevaisuuden tarpeisiin paremmin sopiva AAAjärjestelmä. Samalla esitellään myös joitakin ideoita järjestelmän kehittämiseksi edelleen.

ÄÄNEEN PERUSTUVA KÄYTTÄJÄN TODENTAMINEN PUHELINVERKON LISÄARVOPALVELUISSA

Tässä diplomityössä perehdytään puhujantunnistukseen ja sen käyttökelpoisuuteen käyttäjän henkilöllisyyden todentamisessa osana puhelinverkon lisäarvopalveluja. Puhelimitse ohjattavat palvelut ovat yleensä perustuneet puhelimen näppäimillä lähetettäviin äänitaajuusvalintoihin. Käyttäjän henkilöllisyydestä on voitu varmistua esimerkiksi käyttäjätunnuksen ja salaisen tunnusluvun perusteella. Tulevaisuudessa palvelut voivat perustua puheentunnistukseen, jolloin myös käyttäjän todentaminen äänen perusteella vaikuttaa järkevältä. Työssä esitellään aluksi erilaisia biometrisiä tunnistamismenetelmiä. Työssä perehdytään tarkemmin äänen perusteella tapahtuvaan puhujan todentamiseen. Työn käytännön osuudessa toteutettiin puhelinverkon palveluihin soveltuva puhujantodennussovelluksen prototyyppi. Työn tarkoituksena oli selvittää teknologian käyttömahdollisuuksia sekä kerätä kokemusta puhujantodennuspalvelun toteuttamisesta tulevaisuutta silmällä pitäen. Prototyypin toteutuksessa ohjelmointikielenä käytettiin Javaa.

Reducción del vector de características de reconocimiento facial

In this present work, we are proposing a characteristics reduction system for a facial biometric identification system, using transformed domains such as discrete cosine transformed (DCT) and discrete wavelets transformed (DWT) as parameterization; and Support Vector Machines (SVM) and Neural Network (NN) as classifiers. The size reduction has been done with Principal Component Analysis (PCA) and with Independent Component Analysis (ICA). This system presents a similar success results for both DWT-SVM system and DWT-PCA-SVM system, about 98%. The computational load is improved on training mode due to the decreasing of input’s size and less complexity of the classifier.

Degradação de poluentes emergentes por processos Fenton e foto-Fenton

A continuous photochemical treatment system was developed for aiming the treatment of aqueous solutions containing relevant micro-pollutants (microcystin-LR, sulfamethoxazole and 17-b estradiol). The continuous photo-Fenton process provided high degradation efficiency. However, contact time between samples and the irradiated region is short relative to total treatment time, indicating that observed changes are predominantly due to the Fenton process. Higher degradation efficiency was observed in systems operated using two treatment cycles, the first involving a batch Fenton process and the second a continuous photo-Fenton treatment.

Investigations in flow injection analysis (FIA): conventional FIA determination of chloride in water; sequential injection (SI)-FIA determination of mercury in water

Flow injection analysis (FIA) was applied to the determination of both chloride ion and mercury in water. Conventional FIA was employed for the chloride study. Investigations of the Fe3 +/Hg(SCN)2/CI-,450 nm spectrophotometric system for chloride determination led to the discovery of an absorbance in the 250-260 nm region when Hg(SCN)2 and CI- are combined in solution, in the absence of iron(III). Employing an in-house FIA system, absorbance observed at 254 nm exhibited a linear relation from essentially 0 - 2000 Jlg ml- 1 injected chloride. This linear range spanning three orders of magnitude is superior to the Fe3+/Hg(SCN)2/CI- system currently employed by laboratories worldwide. The detection limit obtainable with the proposed method was determin~d to be 0.16 Jlg ml- 1 and the relative standard deviation was determined to be 3.5 % over the concentration range of 0-200 Jig ml- 1. Other halogen ions were found to interfere with chloride determination at 254 nm whereas cations did not interfere. This system was successfully applied to the determination of chloride ion in laboratory water. Sequential injection (SI)-FIA was employed for mercury determination in water with the PSA Galahad mercury amalgamation, and Merlin mercury fluorescence detection systems. Initial mercury in air determinations involved injections of mercury saturated air directly into the Galahad whereas mercury in water determinations involved solution delivery via peristaltic pump to a gas/liquid separator, after reduction by stannous chloride. A series of changes were made to the internal hardware and valving systems of the Galahad mercury preconcentrator. Sequential injection solution delivery replaced the continuous peristaltic pump system and computer control was implemented to control and integrate all aspects of solution delivery, sample preconcentration and signal processing. Detection limits currently obtainable with this system are 0.1 ng ml-1 HgO.

Habitudes de vie et contrôle glycémique chez des adultes atteints de diabète de type 1 : des barrières envers l’activité physique au calcul des glucides.

Le diabète de type 1 (DT1) est une maladie complexe qui requiert une implication importante des patients pour contrôler leur glycémie et ainsi prévenir les complications et comorbidités. L’activité physique (AP) régulière et une attention constante pour les glucides ingérés sont des adjuvants essentiels au traitement insulinique. Nous avons démontré que le questionnaire BAPAD-1, spécifiquement développé pour des adultes atteints de DT1, est un outil valide (validité prédictive, fiabilité interne et reproductibilité) pour définir des barrières associées à l’AP. Bien que le niveau de barrières envers l’AP soit faible, la crainte de l’hypoglycémie est la barrière la plus importante chez cette population. L’adoption d’un mode de vie actif est associée à un profil corporel favorable. Les adultes, avec un DT1 et non diabétique, qui maintiennent un bon niveau d’AP, soit un ratio entre la dépense énergétique totale et celle au repos ≥ 1.7, ont une masse grasse, un indice de masse corporelle et un tour de taille significativement inférieurs à ceux d’adultes moins actifs. Le niveau d’AP peut être estimé au moyen d’un moniteur d’AP comme le SenseWear Armband™. Afin de compléter les études de validation de cet outil, nous avons évalué et démontré la reproductibilité des mesures. Toutefois, la dépense énergétique est sous-estimée durant les 10 premières minutes d’une AP d’intensité modérée sur ergocycle. L’utilisation de cet appareil est donc justifiée pour une évaluation de la dépense énergétique sur de longues périodes. Le calcul des glucides est une méthode largement utilisée pour évaluer la quantité d’insuline à injecter lors des repas. Nous avons évalué dans un contexte de vie courante, sans révision de la technique, la précision des patients pour ce calcul. L’erreur moyenne est de 15,4 ± 7,8 g par repas, soit 20,9 ± 9,7 % du contenu glucidique. L’erreur moyenne est positivement associée à de plus grandes fluctuations glycémiques mesurées via un lecteur de glucose en continu. Une révision régulière du calcul des glucides est probablement nécessaire pour permettre un meilleur contrôle glycémique. Nous avons développé et testé lors d’un essai clinique randomisé contrôlé un programme de promotion de l’AP (PEP-1). Ce programme de 12 semaines inclut une séance hebdomadaire en groupe ayant pour but d’initier l’AP, d’établir des objectifs et d’outiller les adultes atteints de DT1 quant à la gestion de la glycémie à l’AP. Bien que n’ayant pas permis d’augmenter la dépense énergétique, le programme a permis un maintien du niveau d’AP et une amélioration de la condition cardio-respiratoire et de la pression artérielle. À la fin du programme, une plus grande proportion de patients connaissait la pharmacocinétique de l’insuline et une plus grande variété de méthodes pour contrer l’hypoglycémie associée à l’AP était utilisée. En conclusion, le diabète de type 1 engendre des défis quotidiens particuliers. D’une part, le calcul des glucides est une tâche complexe et son imprécision est associée aux fluctuations glycémiques quotidiennes. D’autre part, l’adoption d’un mode de vie actif, qui est associée à un meilleur profil de composition corporelle, est limitée par la crainte des hypoglycémies. Le programme PEP-1 offre un support pour intégrer l’AP dans les habitudes de vie des adultes avec un DT1 et ainsi améliorer certains facteurs de risque cardio-vasculaire.

Hypoglycémie nocturne et habitudes alimentaires en soirée chez l'adulte atteint de diabète de type 1

L’hypoglycémie est une barrière au traitement du diabète de type 1 (DbT1). La collation au coucher est recommandée pour prévenir l’hypoglycémie nocturne (HN), mais son efficacité n’est pas démontrée. Objectif : Déterminer si une prise alimentaire en soirée est associée à la survenue d’HN. Étude observationnelle : 100 DbT1 ont porté un lecteur de glucose en continu et complété un journal alimentaire pendant 72 heures. L’HN est survenue durant 28 % des nuits. Une prise alimentaire en soirée n’était pas associée à l’HN. Toutefois, dans un modèle ajusté, l’apport en glucides en soirée était positivement associé aux HN (avec injection d’insuline rapide) et l’apport en protéines inversement associé aux HN (sans injection d’insuline rapide). Manger en soirée ne semble pas associé à moins d’HN. Des études contrôlées sont nécessaires pour comprendre l’effet de la collation au coucher sur le contrôle glycémique et le rôle de l’insuline rapide injectée en soirée.

Multifinger Feature Level Fusion Based Fingerprint Identification

Fingerprint based authentication systems are one of the cost-effective biometric authentication techniques employed for personal identification. As the data base population increases, fast identification/recognition algorithms are required with high accuracy. Accuracy can be increased using multimodal evidences collected by multiple biometric traits. In this work, consecutive fingerprint images are taken, global singularities are located using directional field strength and their local orientation vector is formulated with respect to the base line of the finger. Feature level fusion is carried out and a 32 element feature template is obtained. A matching score is formulated for the identification and 100% accuracy was obtained for a database of 300 persons. The polygonal feature vector helps to reduce the size of the feature database from the present 70-100 minutiae features to just 32 features and also a lower matching threshold can be fixed compared to single finger based identification

In vitro studies on colonization resistance of the human gut microbiota to Candida albicans and the effects of tetracycline and Lactobacillus plantarum LPK

An anaerobic three-vessel continuous-flow culture system, which models the three major anatomical regions of the human colon, was used to study the persistence of Candida albicans in the presence of a faecal microbiota. During steady state conditions, overgrowth of C. albicans was prevented by commensal bacteria indigenous to the system. However antibiotics, such as tetracycline have the ability to disrupt the bacterial populations within the gut. Thus, colonization resistance can be compromised and overgrowth of undesirable microorganisms like C. albicans can then occur. In this study, growth of C. albicans was not observed in the presence of an established faecal microbiota. However, following the addition of tetracycline to the growth medium, significant growth of C. albicans occurred. A probiotic Lactobacillus plantarum LPK culture was added to the system to investigate whether this organism had any effects upon the Candida populations. Although C. albicans was not completely eradicated in the presence of this bacterium, cell counts were markedly reduced, indicating a compromised physiological function. This study shows that the normal gut flora can exert 'natural' resistance to C. albicans, however this may be diminished during antibiotic intake. The use of probiotics can help fortify natural resistance.

Optimal control of a class of discrete–continuous non-linear systems — decomposition and hierarchical structure

A technique is derived for solving a non-linear optimal control problem by iterating on a sequence of simplified problems in linear quadratic form. The technique is designed to achieve the correct solution of the original non-linear optimal control problem in spite of these simplifications. A mixed approach with a discrete performance index and continuous state variable system description is used as the basis of the design, and it is shown how the global problem can be decomposed into local sub-system problems and a co-ordinator within a hierarchical framework. An analysis of the optimality and convergence properties of the algorithm is presented and the effectiveness of the technique is demonstrated using a simulation example with a non-separable performance index.

DESIGN AND TEST OF A 7-T SPLIT-PAIR MAGNET FOR MAGNETIC SEPARATION

A 160 mm bore, 7 T split-pair magnet was constructed and tested aiming to mineral processing through HGMS (high gradient magnetic separation) or HCMS (helical channel magnetic separation.) This work describes the design and test results of the pair of coils operating under current in parallel mode. In the case of antiparallel current mode large repulsive force between coils is generated and a strong magnetic field gradient outside the magnet is created. A continuous magnetic separation system made with a helical channel magnetic separator for application in TiO2 processing is analysed.

Modernizing the Brazilian active control network

The Brazilian Network for Continuous Monitoring of GPS - RBMC, since its foundation in December of 1996, has been playing an essential role for the maintenance and user access of the fundamental geodetic frame in the country,. It provides users with a direct link to the Brazilian Geodetic System - SGB. Its role has become more relevant with the increasing use of space navigation technology in the country. Recently, Brazil adopted a new geodetic system, SIRGAS2000, in February 2005, fully compatible with GNSS technology. The paper provides an overview of the recent modernization phases the RBMC network has undergone highlighting its future steps. From its current post-mission mode, the RBMC will evolve into a real-time network, providing real-time data and real-time correction to users. The network enhanced with modern GPS receivers and the addition of atomic clocks will be used to compute WADGPS-type corrections to be transmitted, in real time, to users in Brazil and surrounding areas. It is estimated that users will be able to achieve a horizontal accuracy around 0.5 m (1σ) in static and kinematic positioning and better for dual frequency users. The availability of the WADGPS service will allow users to tie to the new SIRGAS2000 system in a more rapid and transparent way for positioning and navigation applications. It should be emphasized that support to post-mission static positioning will continue to be provided to users interested in higher accuracy levels. In addition to this, a post-mission Precise Point Positioning (PPP) service will be provided based on the one currently provided by the Geodetic Survey Division of NRCan (CSRS-PPP). The modernization of the RBMC is under development based on a cooperation signed at the end of 2004 with the University of New Brunswick, supported by the Canadian International Development Agency and the Brazilian Cooperation Agency. The Geodetic Survey Division of NRCan is also participating in this modernization effort under the same project.