Radiofrequency architectures and technologies for software defined radio

Six-port network is an interesting radiofrequency architecture with multiple possibilities. Since it was firstly introduced in the seventies as an alternative network analyzer, the six-port network has been used for many applications, such as homodyne receivers, radar systems, direction of arrival estimation, UWB (Ultra-Wide-Band), or MIMO (Multiple Input Multiple Output) systems. Currently, it is considered as a one of the best candidates to implement a Software Defined Radio (SDR). This thesis comprises an exhaustive study of this promising architecture, where its fundamentals and the state-of-the-art are also included. In addition, the design and development of a SDR 0.3-6 GHz six-port receiver prototype is presented in this thesis, which is implemented in conventional technology. The system is experimentally characterized and validated for RF signal demodulation with good performance. The analysis of the six-port architecture is complemented by a theoretical and experimental comparison with other radiofrequency architectures suitable for SDR. Some novel contributions are introduced in the present thesis. Such novelties are in the direction of the highly topical issues on six-port technique: development and optimization of real-time I-Q regeneration techniques for multiport networks; and search of new techniques and technologies to contribute to the miniaturization of the six-port architecture. In particular, the novel contributions of this thesis can be summarized as: - Introduction of a new real-time auto-calibration method for multiport receivers, particularly suitable for broadband designs and high data rate applications. - Introduction of a new direct baseband I-Q regeneration technique for five-port receivers. - Contribution to the miniaturization of six-port receivers by the use of the multilayer LTCC (Low Temperature Cofired Ceramic) technology. Implementation of a compact (30x30x1.25 mm) broadband (0.3-6 GHz) six-port receiver in LTTC technology. The results and conclusions derived from this thesis have been satisfactory, and quite fruitful in terms of publications. A total of fourteen works have been published, considering international journals and conferences, and national conferences. Aditionally, a paper has been submitted to an internationally recognized journal, which is currently under review.

A Construction Management Framework for Mass Customisation in Traditional Construction

A Mass Customisation model is discussed as a competitive positioning strategy in the marketplace adding value to the customer’s end-use. It includes the user as part of the construction process responding to the customer’s demands and wishes. To the present day, almost all proposals for Mass Customisation have been focused on the design phase and single family houses. The reality is that the processes carried out in the work execution are so inefficient that the costs of the Mass Customisation models are assumed by the customer and they do not offer solutions that support the change management. Furthermore, this inefficiency often makes Mass Customisation unfeasible in terms of deadlines and site management. Therefore, the present proposal focuses on achieving the paradigm of Mass Customisation in the traditional residential construction complementary to the existing proposals in the design phase. All this through the proposal of a framework for the integral management in the work execution, which will address change management introduced by the users offering an efficient and productive model that reduces costs in the process. This model will focus on the synergy between different strategies, techniques and technologies currently used in the construction management (such as Lean Construction or Six Sigma), together with, other strategies and technologies that have proven to be valid solutions in other fields (such as Business Process Management, Service Oriented Architecture, etc.).

A survey of continuous improvement practices in the United Kingdom and Mexico

With the advent of globalisation companies all around the world must improve their performance in order to survive. The threats are coming from everywhere, and in different ways, such as low cost products, high quality products, new technologies, and new products. Different companies in different countries are using various techniques and using quality criteria items to strive for excellence. Continuous improvement techniques are used to enable companies to improve their operations. Therefore, companies are using techniques such as TQM, Kaizen, Six-Sigma, Lean Manufacturing, and quality award criteria items such as Customer Focus, Human Resources, Information & Analysis, and Process Management. The purpose of this paper is to compare the use of these techniques and criteria items in two countries, Mexico and the United Kingdom, which differ in culture and industrial structure. In terms of the use of continuous improvement tools and techniques, Mexico formally started to deal with continuous improvement by creating its National Quality Award soon after the Americans began the Malcolm Baldrige National Quality Award. The United Kingdom formally started by using the European Quality Award (EQA), modified and renamed as the EFQM Excellence Model. The methodology used in this study was to undertake a literature review of the subject matter and to study some general applications around the world. A questionnaire survey was then designed and a survey undertaken based on the same scale, about the same sample size, and the about the same industrial sector within the two countries. The survey presents a brief definition of each of the constructs to facilitate understanding of the questions. The analysis of the data was then conducted with the assistance of a statistical software package. The survey results indicate both similarities and differences in the strengths and weaknesses of the companies in the two countries. One outcome of the analysis is that it enables the companies to use the results to benchmark themselves and thus act to reinforce their strengths and to reduce their weaknesses.

A study into the effectiveness of quality management training:a focus on tools and critical success factors

Purpose – The purpose of this paper is to investigate the effectiveness of quality management training by reviewing commonly used critical success factors and tools rather than the overall methodological approach. Design/methodology/approach – The methodology used a web-based questionnaire. It consisted of 238 questions covering 77 tools and 30 critical success factors selected from leading academic and practitioner sources. The survey had 79 usable responses and the data were analysed using relevant statistical quality management tools. The results were validated in a series of structured workshops with quality management experts. Findings – Findings show that in general most of the critical success factor statements for quality management are agreed with, although not all are implemented well. The findings also show that many quality tools are not known or understood well; and that training has an important role in raising their awareness and making sure they are used correctly. Research limitations/implications – Generalisations are limited by the UK-centric nature of the sample. Practical implications – The practical implications are discussed for organisations implementing quality management initiatives, training organisations revising their quality management syllabi and academic institutions teaching quality management. Originality/value – Most recent surveys have been aimed at methodological levels (i.e. “lean”, “Six Sigma”, “total quality management” etc.); this research proposes that this has limited value as many of the tools and critical success factors are common to most of the methodologies. Therefore, quite uniquely, this research focuses on the tools and critical success factors. Additionally, other recent comparable surveys have been less comprehensive and not focused on training issues.

Combined quality function deployment and logical framework analysis to improve quality of emergency care in Malta

Purpose – The purpose of this paper is to develop an integrated patient-focused analytical framework to improve quality of care in accident and emergency (A&E) unit of a Maltese hospital. Design/methodology/approach – The study adopts a case study approach. First, a thorough literature review has been undertaken to study the various methods of healthcare quality management. Second, a healthcare quality management framework is developed using combined quality function deployment (QFD) and logical framework approach (LFA). Third, the proposed framework is applied to a Maltese hospital to demonstrate its effectiveness. The proposed framework has six steps, commencing with identifying patients’ requirements and concluding with implementing improvement projects. All the steps have been undertaken with the involvement of the concerned stakeholders in the A&E unit of the hospital. Findings – The major and related problems being faced by the hospital under study were overcrowding at A&E and shortage of beds, respectively. The combined framework ensures better A&E services and patient flow. QFD identifies and analyses the issues and challenges of A&E and LFA helps develop project plans for healthcare quality improvement. The important outcomes of implementing the proposed quality improvement programme are fewer hospital admissions, faster patient flow, expert triage and shorter waiting times at the A&E unit. Increased emergency consultant cover and faster first significant medical encounter were required to start addressing the problems effectively. Overall, the combined QFD and LFA method is effective to address quality of care in A&E unit. Practical/implications – The proposed framework can be easily integrated within any healthcare unit, as well as within entire healthcare systems, due to its flexible and user-friendly approach. It could be part of Six Sigma and other quality initiatives. Originality/value – Although QFD has been extensively deployed in healthcare setup to improve quality of care, very little has been researched on combining QFD and LFA in order to identify issues, prioritise them, derive improvement measures and implement improvement projects. Additionally, there is no research on QFD application in A&E. This paper bridges these gaps. Moreover, very little has been written on the Maltese health care system. Therefore, this study contributes demonstration of quality of emergency care in Malta.

"Quality lives on":quality initiatives and practices in Australia and Britain

Purpose-The purpose of this research is to explore the incidence of innovative approaches to quality in both Australia and Britain, the reasons behind their implementation, the ways in which they were undertaken and the success factors and the pitfalls encountered along the way. Design/methodology/ approach-A structured postal questionnaire was sent to 1,000 quality managers in both Australia and Britain. A response was received from 129 Australian and 175 British companies, who reported on why they did or did not introduce a new quality initiative within the past five years. Findings-A comparative analysis shows trends, similarities and differences, and future directions of quality in both countries. The paper concludes by identifying important lessons for senior management needing to make changes in this important aspect of any business. A high proportion of organisations in both countries are actively undertaking new quality initiatives. The impetus to change and the barriers to successful implementation were common to both countries. The type of initiative differed between the two countries, with a preponderance of ISO 9000 in Australia amongst a much wider choice of approaches than in Britain. There is a low take-up of Six Sigma in both countries, particularly in Australia. Originality/value-The paper offers a recent insight into quality approaches undertaken in both countries and identifies important lessons for senior management. © 2010 Emerald Group Publishing Limited. All rights reserved.

A total quality management methodology for universities

This research document is motivated by the need for a systemic, efficient quality improvement methodology at universities. There exists no methodology designed for a total quality management (TQM) program in a university. The main objective of this study is to develop a TQM Methodology that enables a university to efficiently develop an integral total quality improvement (TQM) Plan. ^ Current research focuses on the need of improving the quality of universities, the study of the perceived best quality universities, and the measurement of the quality of universities through rankings. There is no evidence of research on how to plan for an integral quality improvement initiative for the university as a whole, which is the main contribution of this study. ^ This research is built on various reference TQM models and criteria provided by ISO 9000, Baldrige and Six Sigma; and educational accreditation criteria found in ABET and SACS. The TQM methodology is proposed by following a seven-step metamethodology. The proposed methodology guides the user to develop a TQM plan in five sequential phases: initiation, assessment, analysis, preparation and acceptance. Each phase defines for the user its purpose, key activities, input requirements, controls, deliverables, and tools to use. The application of quality concepts in education and higher education is particular; since there are unique factors in education which ought to be considered. These factors shape the quality dimensions in a university and are the main inputs to the methodology. ^ The proposed TQM Methodology is used to guide the user to collect and transform appropriate inputs to a holistic TQM Plan, ready to be implemented by the university. Different input data will lead to a unique TQM plan for the specific university at the time. It may not necessarily transform the university into a world-class institution, but aims to strive for stakeholder-oriented improvements, leading to a better alignment with its mission and total quality advancement. ^ The proposed TQM methodology is validated in three steps. First, it is verified by going through a test activity as part of the meta-methodology. Secondly, the methodology is applied to a case university to develop a TQM plan. Lastly, the methodology and the TQM plan both are verified by an expert group consisting of TQM specialists and university administrators. The proposed TQM methodology is applicable to any university at all levels of advancement, regardless of changes in its long-term vision and short-term needs. It helps to assure the quality of a TQM plan, while making the process more systemic, efficient, and cost effective. This research establishes a framework with a solid foundation for extending the proposed TQM methodology into other industries. ^

Aplicação da metodologia DMAIC a uma linha de produção de cartão canelado

O presente trabalho resultou da realização de um estágio curricular na empresa Fábrica de Papel e Cartão da Zarrinha, S.A.. O trabalho incide sobre a aplicação da metodologia DMAIC da abordagem Seis-Sigma a uma linha de produção de cartão canelado, mais especificamente a um tipo de não conformidade do mesmo, denominado por cartão com Warp (ou cartão com empeno). Através desta aplicação, foi possível encontrar as principais causas-raíz do problema em questão e delinear possíveis ações de melhoria para solucionar o mesmo. Durante a implementação desta metodologia foram utilizadas várias ferramentas de qualidade que permitiram uma melhor gestão e tratamento da informação de forma a agilizar alguns processos também como a comunicação interna. Sob a forma de resultados, além de se testemunhar a diminuição de placas e embalagens de cartão com warp, conseguiu-se também a sensibilização dos vários departamentos para a problemática em questão e, principalmente, para a utilização e consciencialização da metodologia Seis-Sigma e dos seus benefícios.

Analysis of competitiveness level in an industrial company using a continuous improvement based approach

International audience

Diseño y aplicación de un modelo de remuneración variable para una empresa del sector de las telecomunicaciones

Actualmente encontramos una fuerte presión en las organizaciones por adaptarse a un mundo competitivo con un descenso en las utilidades y una incertidumbre constante en su flujo de caja. Estas circunstancias obligan a las organizaciones al mejoramiento continuo buscando nuevas formas de gestionar sus procesos y sus recursos. Para las organizaciones de prestación de servicios en el sector de telecomunicaciones una de las ventajas competitivas más importantes de obtener es la productividad debido a que sus ganancias dependen directamente del número de actividades que puedan ejecutar cada empleado. El reto es hacer más con menos y con mejor calidad. Para lograrlo, la necesidad de gestionar efectivamente los recursos humanos aparece, y aquí es donde los sistemas de compensación toman un rol importante. El objetivo en este trabajo es diseñar y aplicar un modelo de remuneración variable para una empresa de prestación de servicios profesionales en el sector de las telecomunicaciones y con esto aportar al estudio de la gestión del desempeño y del talento humano en Colombia. Su realización permitió la documentación del diseño y aplicación del modelo de remuneración variable en un proyecto del sector de telecomunicaciones en Colombia. Su diseño utilizó las tendencias de programas remunerativos y teorías de gestión de desempeño para lograr un modelo integral que permita el crecimiento sostenido en el largo plazo y la motivación al recurso más importante de la organización que es el talento humano. Su aplicación permitió también la documentación de problemas y aciertos en la implementación de estos modelos.

Combination of product quality management and exports: The case of Colombian fruits companies

Quality management provides to companies a framework to improve quality in overall systems, reduction of costs, reallocation of resources efficiently, correct planning of strategies, prevent or correct errors in the right time and increase the performance of companies. In this text, we discuss the different theories in this field, their obligatory or non-obligatory compliance, the importance of quality management for exporting companies and a case study of a Colombian firm that its main objective is to manage quality. In conclusion, we find out that there is different types of quality management systems such as Juran’s trilogy, Deming 14 points, Six sigma, HACCP, and so on; also that companies have to manage suppliers and that quality has a positive influence on exports volume; in the case of Colombian small and medium enterprises, it can be mentioned that the majority has implemented tools regarding quality management but is not enough.

A new approach for in vitro bioassay to measure tannin biological effects based on a gas production technique

The aim of this paper was to study a method based on gas production technique to measure the biological effects of tannins on rumen fermentation. Six feeds were used as fermentation substrates in a semi-automated gas method: feed A - aroeira (Astronium urundeuva); feed B - jurema preta (Mimosa hostilis), feed C - sorghum grains (Sorghum bicolor); feed D - Tifton-85 (Cynodon sp.); and two others prepared mixing 450 g sorghum leaves, 450 g concentrate (maize and soybean meal) and 100 g either of acacia (Acacia mearnsii) tannin extract (feed E) or quebracho (Schinopsis lorentzii) tannin extract (feed F) per kg (w:w). Three assays were carried out to standardize the bioassay for tannins. The first assay compared two binding agents (polyethylene glycol - PEG - and polyvinyl polypirrolidone - PVPP) to attenuate the tannin effects. The complex formed by PEG and tannins showed to be more stable than PVPP and tannins. Then, in the second assay, PEG was used as binding agent, and this assay was done to evaluate levels of PEG (0, 500, 750, 1000 and 1250 mg/g DM) to minimize the tannin effect. All the tested levels of PEG produced a response to evaluate tannin effects but the best response was for dose of 1000 mg/g DM. Using this dose of PEG, the final assay was carried out to test three compounds (tannic acid, quebracho extract and acacia extract) to establish a curve of biological equivalent effect of tannins. For this, five levels of each compound were added to I g of a standard feed (Lucerne hay). The equivalent effect showed not to be directly related to the chemical analysis for tannins. It was shown that different sources of tannins had different activities or reactivities. The curves of biological equivalence can provide information about tannin reactivity and its use seems to be important as an additional factor for chemical analysis. (C) 2007 Elsevier B.V. All rights reserved.