Sequence features responsible for intron retention in human

Abstract Background One of the least common types of alternative splicing is the complete retention of an intron in a mature transcript. Intron retention (IR) is believed to be the result of intron, rather than exon, definition associated with failure of the recognition of weak splice sites flanking short introns. Although studies on individual retained introns have been published, few systematic surveys of large amounts of data have been conducted on the mechanisms that lead to IR. Results TTo understand how sequence features are associated with or control IR, and to produce a generalized model that could reveal previously unknown signals that regulate this type of alternative splicing, we partitioned intron retention events observed in human cDNAs into two groups based on the relative abundance of both isoforms and compared relevant features. We found that a higher frequency of IR in human is associated with individual introns that have weaker splice sites, genes with shorter intron lengths, higher expression levels and lower density of both a set of exon splicing silencers (ESSs) and the intronic splicing enhancer GGG. Both groups of retained introns presented events conserved in mouse, in which the retained introns were also short and presented weaker splice sites. Conclusion Although our results confirmed that weaker splice sites are associated with IR, they showed that this feature alone cannot explain a non-negligible fraction of events. Our analysis suggests that cis-regulatory elements are likely to play a crucial role in regulating IR and also reveals previously unknown features that seem to influence its occurrence. These results highlight the importance of considering the interplay among these features in the regulation of the relative frequency of IR.

Effect of larval density and feeding sequence on meagre (Argyrosomus regius Asso, 1801) larval rearing

[EN] Meagre, has been proposed as a candidate for marine finfish diversification on commercial aquaculture (Quémèner, 2002, Mateos, 2007). Despite of the elevated on growing potential, the most important bottleneck of this specie is related to the limited production of fry. Larval rearing of this species, is performed mainly adapting seabream culture techniques with different success (Roo et al., 2007) However, since limited information about the optimal feeding sequences and nutritional requirements of meagre is available, more research is needed on larval rearing protocols and nutrition. Present results (elevated larval growth rate, high survival, short rotifers period) are very promising for a successful implementation at industrial scale, which helps to solve the continues lack of fry of this specie in the Mediterranean and Canary islands.

Domänen des Kapsidproteins L2 humanpathogener Papillomviren für die Interaktion mit viralen und zellulären Bindungspartnern

Die Kapsidproteine L1 und L2 von humanen Papillomviren (HPV) werden im Cytoplasma infizierter Keratinocyten synthetisiert und gelangen unabhängig voneinander in den Kern (Florin et al. 2002b). L2 lokalisiert in speziellen Kerndomänen, sog. ND10, und induziert die Reorganisation dieser Kernstrukturen: L2-abhängig akkumuliert der transkriptionelle Modulator Daxx verstärkt in ND10 und außerdem kommt es zum Ausschluss des transkriptionellen Aktivators Sp100 aus diesen Domänen (Florin et al. 2002a). Im Anschluss an diese Umorganisation im Kern induziert L2 die Lokalisation des Kapsidproteins L1 in ND10 (Florin et al. 2002b). Da auch die Replikation und Transkription von Papillomviren in oder in unmittelbarer Nähe von ND10 stattfinden, werden ND10 als Orte der Papillomvirus-Morphogenese diskutiert (Swindle et al. 1999). Innerhalb dieser Arbeit konnte gezeigt werden, dass L1 und L2 im Cytoplasma der Zellen mit Chaperonen interagieren, und dass der Kerntransport von L2 von der L2/Hsc70-Assoziation abhängig ist. Hsc70, das mit dem C-Terminus von L2 assoziiert ist, wird in virusähnliche Partikel (VLPs) eingebaut. Erst durch die Verpackung von DNA in die Kapside kommt es zum Ausschluss von Hsc70 aus dem Papillomvirus-Kapsid. Ergebnisse dieser Arbeit lassen zudem vermuten, dass L2 über seinen C-Terminus mit Mikrotubuli interagieren kann, falls diese Aminosäure-Region in L2 nicht durch das Chaperon maskiert wird. Mit Hilfe dieser Erkenntnisse wurde eine Modellvorstellung für die Rolle von L2 während der Infektion und der Morphogenese von HPV entwickelt. Die ND10-Lokalisationsdomäne (NDLD) in L2 konnte wie bei keinem Protein zuvor auf eine sehr kurze Sequenz von 22 Aminosäuren eingeengt werden. Welcher Mechanismus für die ND10-Lokalisation verantwortlich ist, muss dagegen noch geklärt werden. Alle L2-Mutanten, die ND10-Lokalisation zeigen, induzieren auch die Reorganisation dieser Domänen. Dies spricht dafür, dass L2 direkt in ND10 die Veränderungen hervorruft und wahrscheinlich keine zusätzlichen Domänen in L2 daran beteiligt sind. Es konnten zwei L1-Interaktionsdomänen in L2 kartiert werden. Diese beiden Regionen in L2 konnten nicht genauer lokalisiert werden und umfassen möglicherweise mehrere L1-Interaktionsdomänen. Der Einbau von L2 in die Kapside kann nur im Kern infizierter Zellen stattfinden. Hierfür ist die Lokalisation der Kapsidproteine in ND10 nicht notwendig. Weiterführende Versuche müssen jedoch noch klären, inwieweit ND10 trotzdem unerlässlich für eine produktive Morphogenese sind. Zudem wurde klar, dass die ersten 150 Aminosäuren im L2-Protein für das L1/L2-Verhältnis in Kapsiden verantwortlich sind. In Virionen beträgt dieses Verhältnis 30:1, d. h. zwölf L2-Moleküle werden in die Partikel aus 360 L1-Molekülen eingebaut. Bei der Verwendung der Deletionsmutante L2-150/467 beträgt dieses Verhältnis 5:1. Weitere Analysen, welche Regionen von L1 und L2 miteinander interagieren und wodurch die Beschränkung des L1/L2-Verhältnisses in Papillomviren zustande kommt, können genauere Einblicke in den Aufbau der Kapside und speziell die Lage von L2 im Kapsid liefern.

Untersuchung magnetischer Nanostrukturen mittels Rastertunnelspektroskopie und Kerr-Magnetometrie am Beispiel von Fe, Co, Co-Fe und Fe-Mn Nanostrukturen

Nach einer kurzen Einführung in die Entwicklung der magnetischen Anwendungen, werden in Kapitel 2 und 3 die physikalischen Grundlagen der Messmethoden, insbesondere die Rastertunnelspektroskopie und Kerr-Magnetometrie, sowie der experimentelle Aufbau erläutert. Kapitel 4 beschäftigt sich mit den magnetischen Eigenschaften von quasi ein-dimensionalen ferromagnetischen Nanostreifen und Monolagen, die durch Selbstorganisation auf einem Wolfram(110)-Einkristall mit vizinaler und glatter Oberfläche präpariert werden. Hierbei wird die Temperaturabhängigkeit der magnetischen Größen, wie Remanenz, Sättigungsmagnetisierung und Suszeptibilität, sowie die Auswirkung einer Abdeckung des Systems auf die Domänenwandenergie und Anisotropie untersucht. Zusätzlich wird die Kopplung von parallelen Nanostreifen in Abhängigkeit des Streifenabstandes betrachtet. In Kapitel 5 werden das Wachstum und die Morphologie von Co-Monolagen auf W(110) untersucht. Der Übergang von pseudomorphem zu dicht gepacktem Wachstum in der Monolage wird mit Hilfe der Rastertunnelspektroskopie sichtbar gemacht, ebenso wie unterschiedliche Stapelfolgen in Tripellagen Co-Systemen. Atomar aufgelöste Rastertunnelmikroskopie erlaubt die genauen Atompositionen der Oberfläche zu bestimmen und mit theoretischen Wachstumsmodellen zu vergleichen. Auf die Untersuchung zwei-dimensionaler binärer Co-Fe und Fe-Mn Legierungen auf W(110) wird in Kapitel 6 eingegangen. Mit einer Präparationstemperatur von T=520 K ist es möglich, atomar geordnete Co-Fe Legierungsmonolagen wachsen zu lassen. Ein direkter Zusammenhang zwischen der Magnetisierung und der lokalen Zustandsdichte in Abhängigkeit der Legierungszusammensetzung wird gezeigt.

Komparative Analyse der humanen Chromosomenregion 11p15.3 um die Gene LMO1,TUB und der orthologen Region in der Maus

Ziel der vorliegenden Arbeit war die vergleichende Sequenzierung und nachfolgende Analyse des syntänen chromosomalen Abschnitts auf dem kurzen Arm des humanen Chromosoms 11 in der Region 11p15.3 mit den Genen LMO1, TUB und dem orthologen Genomabschnitt der Maus auf Chromosom 7 F2. Die im Rahmen dieser Arbeit durchgeführte Kartierung dieser beiden chromosomalen Bereiche ermöglichte die Komplettierung einer genomischen Karte auf insgesamt über eine Megabase, die im Kooperationssequenzierprojekt der Universitäts-Kinderklinik und dem Institut für Molekulargenetik in Mainz erstellt wurde. Mit Hilfe von 28 PAC- und Cosmid-Klonen konnten in dieser Arbeit 383 kb an genomischer DNA des Menschen und mit sechs BAC- und PAC-Klonen 412 kb an genomischer DNA der Maus dargestellt werden. Dies ermöglichte erstmals die exakte Festlegung der Reihenfolge der in diesem chromosomalen Abschnitt enthaltenen Gene und die genaue Kartierung von acht STS-Markern des Menschen, bzw. vier STS-Sonden der Maus. Es zeigte sich dabei, dass die chromosomale Orientierung telomer-/centromerwärts des orthologen Bereichs in der Maus im Vergleich zum Menschen in invertierter Ausrichtung vorliegt. Die Sequenzierung von drei humanen Klonen ermöglichte die Bestimmung von 319.119 bp an zusammenhängender genomischer DNA. Dadurch konnte die genaue Lokalisation und Strukturaufklärung der Gene LMO1, ein putatives Tumorsuppressorgen, das mit der Entstehung von Leukämien assoziiert ist, und TUB, ein Transkriptionsmodulator, der in die Fettstoffwechselregulation involviert ist, vorgenommen werden. Für das murine Genom wurden 412.827 bp an neuer DNA-Sequenz durch Sequenzierung von ebenfalls drei Klonen generiert. Der im Vergleich zum Menschen ca. 100 kb größere Genombereich beinhaltete zudem die neuen Gene Stk33 und Eif3. Es handelte sich dabei um zwei Gene, die erst im Rahmen dieser Arbeit entdeckt und charakterisiert wurden. Die parallele Bearbeitung beider Genombereiche ermöglichte eine umfassende komparative Analyse nach kodierenden, funktionellen und strukturgebenden Sequenzabschnitten in beiden Spezies. Es konnten dabei für beide Organismen die Exon-Intron-Strukturen der Gene LMO1/Lmo1 und TUB/Tub geklärt. Zudem konnten vier neue Exons und zwei neue speziesspezifischer Spleißvarianten für TUB/Tub beschrieben werden. Die Identifizierung dieser neuen Spleißvarianten offenbart neue Möglichkeiten für alternative Regulation und Funktion, oder für eine veränderte Proteinstruktur, die weitere Erklärungsansätze für die Entstehung der mit diesen Genen assoziierten Erkrankungen zulässt. In der sequenzierten, größeren Genomsequenz der Maus konnte in den flankierenden, nicht mit der sequenzierten Humansequenz überlappenden Bereich das neue Gen Eif3 in seiner Exon-Intron-Struktur und die beiden letzten Exons 11 und 12 des Gens Stk33 kartiert und charakterisiert werden. Die umfangreiche Sequenzanalyse beider sequenzierter Genombereiche ergab für den Abschnitt des Menschen insgesamt 229 potentielle Exonsequenzen und für den Bereich der Maus 527 mögliche Exonbereiche. Davon konnten beim Menschen explizit 21 Exons und bei der Maus 31 Exons als exprimierte Bereiche identifiziert und experimentell mittels RT-PCR, bzw. durch cDNA-Sequenzierung verifiziert werden. Diese Abschnitte beschrieben nicht nur die Exonbereiche der oben genannten vier Gene, sondern konnten auch neuen nicht weiter definierten EST-Sequenzen zugeordnet werden. Mittels des Interspeziesvergleiches war darüber hinaus auch die Analyse der nichtkodierenden Intergen-Bereiche möglich. So konnten beispielsweise im ersten Intron des LMO1/Lmo1 sieben Sequenzbereiche mit Konservierungen von ca. 90% bestimmt werden. Auch die Charakterisierung von Promotor- und putativ regulatorischen Sequenzabschnitten konnte mit Hilfe unterschiedlicher bioinformatischer Analyse-Tools durchgeführt werden. Die konservierten Sequenzbereiche der DNA zeigen im Durchschnitt eine Homologie von mehr als 65% auf. Auch die Betrachtung der Genomorganisation zeigte Gemeinsamkeiten, die sich meist nur in ihrer graduellen Ausprägung unterschieden. So weist ein knapp 80 kb großer Bereich proximal zum humanen TUB-Gen einen deutlich erhöhten AT-Gehalt auf, der ebenso im murinen Genom nur in verkürzter Version und schwächer ausgeprägt in Erscheinung tritt. Die zusätzliche Vergleichsanalyse mit einer weiteren Spezies, den orthologen Genomabschnitten von Fugu, zeigte, dass es sich bei den untersuchten Genen LMO1 und TUB um sehr konservierte und evolutiv alte Gene handelt, deren genomisches Organisationsmuster sich auch bei den paralogen Genfamilienmitglieder innerhalb derselben Spezies wiederfindet. Insgesamt konnte durch die Kartierung, Sequenzierung und Analyse eine umfassende Datenbasis für die betrachtete Genomregion und die beschriebenen Gene generiert werden, die für zukünftige Untersuchungen und Fragestellungen wertvolle Informationen bereithält.

Mining for Class-Specific Motifs in Protein Sequence Classification

Background: In protein sequence classification, identification of the sequence motifs or n-grams that can precisely discriminate between classes is a more interesting scientific question than the classification itself. A number of classification methods aim at accurate classification but fail to explain which sequence features indeed contribute to the accuracy. We hypothesize that sequences in lower denominations (n-grams) can be used to explore the sequence landscape and to identify class-specific motifs that discriminate between classes during classification. Discriminative n-grams are short peptide sequences that are highly frequent in one class but are either minimally present or absent in other classes. In this study, we present a new substitution-based scoring function for identifying discriminative n-grams that are highly specific to a class. Results: We present a scoring function based on discriminative n-grams that can effectively discriminate between classes. The scoring function, initially, harvests the entire set of 4- to 8-grams from the protein sequences of different classes in the dataset. Similar n-grams of the same size are combined to form new n-grams, where the similarity is defined by positive amino acid substitution scores in the BLOSUM62 matrix. Substitution has resulted in a large increase in the number of discriminatory n-grams harvested. Due to the unbalanced nature of the dataset, the frequencies of the n-grams are normalized using a dampening factor, which gives more weightage to the n-grams that appear in fewer classes and vice-versa. After the n-grams are normalized, the scoring function identifies discriminative 4- to 8-grams for each class that are frequent enough to be above a selection threshold. By mapping these discriminative n-grams back to the protein sequences, we obtained contiguous n-grams that represent short class-specific motifs in protein sequences. Our method fared well compared to an existing motif finding method known as Wordspy. We have validated our enriched set of class-specific motifs against the functionally important motifs obtained from the NLSdb, Prosite and ELM databases. We demonstrate that this method is very generic; thus can be widely applied to detect class-specific motifs in many protein sequence classification tasks. Conclusion: The proposed scoring function and methodology is able to identify class-specific motifs using discriminative n-grams derived from the protein sequences. The implementation of amino acid substitution scores for similarity detection, and the dampening factor to normalize the unbalanced datasets have significant effect on the performance of the scoring function. Our multipronged validation tests demonstrate that this method can detect class-specific motifs from a wide variety of protein sequence classes with a potential application to detecting proteome-specific motifs of different organisms.

Utilization of Probabilistic Models in Short Read Assembly from Second-Generation Sequencing

With the advent of cheaper and faster DNA sequencing technologies, assembly methods have greatly changed. Instead of outputting reads that are thousands of base pairs long, new sequencers parallelize the task by producing read lengths between 35 and 400 base pairs. Reconstructing an organism’s genome from these millions of reads is a computationally expensive task. Our algorithm solves this problem by organizing and indexing the reads using n-grams, which are short, fixed-length DNA sequences of length n. These n-grams are used to efficiently locate putative read joins, thereby eliminating the need to perform an exhaustive search over all possible read pairs. Our goal was develop a novel n-gram method for the assembly of genomes from next-generation sequencers. Specifically, a probabilistic, iterative approach was utilized to determine the most likely reads to join through development of a new metric that models the probability of any two arbitrary reads being joined together. Tests were run using simulated short read data based on randomly created genomes ranging in lengths from 10,000 to 100,000 nucleotides with 16 to 20x coverage. We were able to successfully re-assemble entire genomes up to 100,000 nucleotides in length.

Enhancing BOLD response in the auditory system by neurophysiologically tuned fMRI sequence

Auditory neuroscience has not tapped fMRI's full potential because of acoustic scanner noise emitted by the gradient switches of conventional echoplanar fMRI sequences. The scanner noise is pulsed, and auditory cortex is particularly sensitive to pulsed sounds. Current fMRI approaches to avoid stimulus-noise interactions are temporally inefficient. Since the sustained BOLD response to pulsed sounds decreases with repetition rate and becomes minimal with unpulsed sounds, we developed an fMRI sequence emitting continuous rather than pulsed gradient sound by implementing a novel quasi-continuous gradient switch pattern. Compared to conventional fMRI, continuous-sound fMRI reduced auditory cortex BOLD baseline and increased BOLD amplitude with graded sound stimuli, short sound events, and sounds as complex as orchestra music with preserved temporal resolution. Response in subcortical auditory nuclei was enhanced, but not the response to light in visual cortex. Finally, tonotopic mapping using continuous-sound fMRI demonstrates that enhanced functional signal-to-noise in BOLD response translates into improved spatial separability of specific sound representations.

A continuous-time MILP model for short-term scheduling of make-and-pack production processes

In process industries, make-and-pack production is used to produce food and beverages, chemicals, and metal products, among others. This type of production process allows the fabrication of a wide range of products in relatively small amounts using the same equipment. In this article, we consider a real-world production process (cf. Honkomp et al. 2000. The curse of reality – why process scheduling optimization problems are diffcult in practice. Computers & Chemical Engineering, 24, 323–328.) comprising sequence-dependent changeover times, multipurpose storage units with limited capacities, quarantine times, batch splitting, partial equipment connectivity, and transfer times. The planning problem consists of computing a production schedule such that a given demand of packed products is fulfilled, all technological constraints are satisfied, and the production makespan is minimised. None of the models in the literature covers all of the technological constraints that occur in such make-and-pack production processes. To close this gap, we develop an efficient mixed-integer linear programming model that is based on a continuous time domain and general-precedence variables. We propose novel types of symmetry-breaking constraints and a preprocessing procedure to improve the model performance. In an experimental analysis, we show that small- and moderate-sized instances can be solved to optimality within short CPU times.

The short-term treatment effects on the microbiota at the dorsum of the tongue in intra-oral halitosis patients-a randomized clinical trial

OBJECTIVES This study aims to assess the effects of rinsing with zinc- and chlorhexidine-containing mouth rinse with or without adjunct tongue scraping on volatile sulfur compounds (VSCs) in breath air, and the microbiota at the dorsum of the tongue. MATERIAL AND METHODS A randomized single-masked controlled clinical trial with a cross-over study design over 14 days including 21 subjects was performed. Bacterial samples from the dorsum of the tongue were assayed by checkerboard DNA-DNA hybridization. RESULTS No halitosis (identified by VSC assessments) at day 14 was identified in 12/21 subjects with active rinse alone, in 10/21 with adjunct use of tongue scraper, in 1/21 for negative control rinse alone, and in 3/21 in the control and tongue scraping sequence. At day 14, significantly lower counts were identified only in the active rinse sequence (p < 0.001) for 15/78 species including, Fusobacterium sp., Porphyromonas gingivalis, Pseudomonas aeruginosa, Staphylococcus aureus, and Tannerella forsythia. A decrease in bacteria from baseline to day 14 was found in successfully treated subjects for 9/74 species including: P. gingivalis, Prevotella melaninogenica, S. aureus, and Treponema denticola. Baseline VSC scores were correlated with several bacterial species. The use of a tongue scraper combined with active rinse did not change the levels of VSC compared to rinsing alone. CONCLUSIONS VSC scores were not associated with bacterial counts in samples taken from the dorsum of the tongue. The active rinse alone containing zinc and chlorhexidine had effects on intra-oral halitosis and reduced bacterial counts of species associated with malodor. Tongue scraping provided no beneficial effects on the microbiota studied. CLINICAL RELEVANCE Periodontally healthy subjects with intra-oral halitosis benefit from daily rinsing with zinc- and chlorhexidine-containing mouth rinse.

OSL and TL dating of the Middle Stone Age sequence at Diepkloof Rock Shelter (South Africa): a clarification

Diepkloof Rock Shelter offers an exceptional opportunity to study the onset and evolution of both Still Bay (SB) and Howiesons Poort (HP) techno-complexes. However, previous age estimates based on luminescence dating of burnt quartzites (Tribolo et al., 2009) and of sediments (Jacobs et al., 2008) were not in agreement. Here, we present new luminescence ages for 17 rock samples (equivalent dose estimated with a SAR-ITL protocol instead of classical MAAD-TL) as well as for 5 sediment samples (equivalent dose estimated with SAR-single grain OSL protocol) and an update of the 22 previous age estimates for burnt lithics (modified calibration and beta dose estimates). While a good agreement between the rock and sediment ages is obtained, these estimates are still significantly older than those reported by Jacobs et al. (2008). After our own analyses of the sediment from Diepkloof, it is suspected that these authors did not correctly chose the parameters for the equivalent dose determination, leading to an underestimate of the equivalent doses, and thus of the ages. From bottom to top, the mean ages are 100 ± 10 ka for stratigraphic unit (SU) Noël and 107 ± 11 ka for SU Mark (uncharacterized Lower MSA), 100 ± 10 ka for SU Lynn-Leo (Pre-SB type Lynn), 109 ± 10 ka for SUs Kim-Larry (SB), 105 ± 10 ka for SUs Kerry-Kate and 109 ± 10 ka for SU Jess (Early HP), 89 ± 8 ka for SU Jude (MSA type Jack), 77 ± 8 ka for SU John, 85 ± 9 ka for SU Fox, 83 ± 8 ka for SU Fred and 65 ± 8 ka for SU OB5 (Intermediate HP), 52 ± 5 ka for SUs OB2-4 (Late HP). This chronology, together with the technological analyses, greatly modifies the current chrono-cultural model regarding the SB and the HP and has important archaeological implications. Indeed, SB and HP no longer appear as short-lived techno-complexes with synchronous appearances for each and restricted to Oxygen Isotopic Stage (OIS) 4 across South Africa, as suggested by Jacobs et al. (2008, 2012). Rather, the sequence of Diepkloof supports a long chronology model with an early appearance of both SB and HP in the first half of OIS 5 and a long duration of the HP into OIS 3. These new dates imply that different technological traditions coexisted during OIS 5 and 4 in southern Africa and that SB and HP can no longer be considered as horizon markers.

A trilocus sequence typing scheme for hospital epidemiology and subspecies differentiation of an important nosocomial pathogen, Enterococcus faecalis.

In this study, we present a trilocus sequence typing (TLST) scheme based on intragenic regions of two antigenic genes, ace and salA (encoding a collagen/laminin adhesin and a cell wall-associated antigen, respectively), and a gene associated with antibiotic resistance, lsa (encoding a putative ABC transporter), for subspecies differentiation of Enterococcus faecalis. Each of the alleles was analyzed using 50 E. faecalis isolates representing 42 diverse multilocus sequence types (ST(M); based on seven housekeeping genes) and four groups of clonally linked (by pulsed-field gel electrophoresis [PFGE]) isolates. The allelic profiles and/or concatenated sequences of the three genes agreed with multilocus sequence typing (MLST) results for typing of 49 of the 50 isolates; in addition to the one exception, two isolates were found to have identical TLST types but were single-locus variants (differing by a single nucleotide) by MLST and were therefore also classified as clonally related by MLST. TLST was also comparable to PFGE for establishing short-term epidemiological relationships, typing all isolates classified as clonally related by PFGE with the same type. TLST was then applied to representative isolates (of each PFGE subtype and isolation year) of a collection of 48 hospital isolates and demonstrated the same relationships between isolates of an outbreak strain as those found by MLST and PFGE. In conclusion, the TLST scheme described here was shown to be successful for investigating short-term epidemiology in a hospital setting and may provide an alternative to MLST for discriminating isolates.

Heterozygous GHR gene mutation in a child with idiopathic short stature.

Abstract Several monogenic defects have been reported to be associated with idiopathic short stature. Focusing on growth hormone receptor (GHR)-gene alterations, the heterozygosity of the same gene defect may be associated with a range of growth deficits. We found a heterozygous mutation (V144I) within exon 6 of the GHR gene in a patient with a low level of insulin-like growth factor I (IGF-I), normal level of GH, and severe short stature. Despite the lack of statistical difference, an overall tendency for reduced wt-GH-induction of GHR activation and Jak/Stat signalling in cells transiently expressing GHR-V144I alone or co-expressing wt-GHR compared to cells expressing only wt-GHR was found when GH doses were increased. Our results suggest that, although GHR sequence variants are responsible for some functional alterations commonly observed in children with idiopathic short stature, these changes may not explain all the height deficits observed in these subjects.

Hyalotekite, (Ba,Pb,K)(4)(Ca,Y)(2)Si-8(B,Be)(2)(Si,B)(2)O28F, a Tectosilicate Related to Scapolite: New Structure Refinement, Phase Transitions and a Short-Range Ordered 3B Superstructure

Hyalotekite, a framework silicate of composition (Ba,Pb,K)(4)(Ca,Y)(2)Si-8(B,Be)(2) (Si,B)(2)O28F, is found in relatively high-temperature(greater than or equal to 500 degrees C) Mn skarns at Langban, Sweden, and peralkaline pegmatites at Dara-i-Pioz, Tajikistan. A new paragenesis at Dara-i-Pioz is pegmatite consisting of the Ba borosilicates leucosphenite and tienshanite, as well as caesium kupletskite, aegirine, pyrochlore, microcline and quartz. Hyalotekite has been partially replaced by barylite and danburite. This hyalotekite contains 1.29-1.78 wt.% Y2O3, equivalent to 0.172-0.238 Y pfu or 8-11% Y on the Ca site; its Pb/(Pb+Ba) ratio ranges 0.36-0.44. Electron microprobe F contents of Langban and Dara-i-Pioz hyalotekite range 1.04-1.45 wt.%, consistent with full occupancy of the F site. A new refinement of the structure factor data used in the original structural determination of a Langban hyalotekite resulted in a structural formula, (Pb1.96Ba1.86K0.18)Ca-2(B1.76Be0.24)(Si1.56B0.44)Si8O28F, consistent with chemical data and all cations with positive-definite thermal parameters, although with a slight excess of positive charge (+57.14 as opposed to the ideal +57.00). An unusual feature of the hyalotekite framework is that 4 of 28 oxygens are non-bridging; by merging these 4 oxygens into two, the framework topology of scapolite is obtained. The triclinic symmetry of hyalotekite observed at room temperature is obtained from a hypothetical tetragonal parent structure via a sequence of displacive phase transitions. Some of these transitions are associated with cation ordering, either Pb-Ba ordering in the large cation sites, or B-Be and Si-B ordering on tetrahedral sites. Others are largely displacive but affect the coordination of the large cations (Pb, Ba, K, Ca). High-resolution electron microscopy suggests that the undulatory extinction characteristic of hyalotekite is due to a fine mosaic microstructure. This suggests that at least one of these transitions occurs in nature during cooling, and that it is first order with a large volume change. A diffuse superstructure observed by electron diffraction implies the existence of a further stage of short-range cation ordering which probably involves both (Pb,K)-Ba and (BeSi,BB)-BSi.

A hybrid method for large-scale short-term scheduling of make-and-pack production processes

Due to the ongoing trend towards increased product variety, fast-moving consumer goods such as food and beverages, pharmaceuticals, and chemicals are typically manufactured through so-called make-and-pack processes. These processes consist of a make stage, a pack stage, and intermediate storage facilities that decouple these two stages. In operations scheduling, complex technological constraints must be considered, e.g., non-identical parallel processing units, sequence-dependent changeovers, batch splitting, no-wait restrictions, material transfer times, minimum storage times, and finite storage capacity. The short-term scheduling problem is to compute a production schedule such that a given demand for products is fulfilled, all technological constraints are met, and the production makespan is minimised. A production schedule typically comprises 500–1500 operations. Due to the problem size and complexity of the technological constraints, the performance of known mixed-integer linear programming (MILP) formulations and heuristic approaches is often insufficient. We present a hybrid method consisting of three phases. First, the set of operations is divided into several subsets. Second, these subsets are iteratively scheduled using a generic and flexible MILP formulation. Third, a novel critical path-based improvement procedure is applied to the resulting schedule. We develop several strategies for the integration of the MILP model into this heuristic framework. Using these strategies, high-quality feasible solutions to large-scale instances can be obtained within reasonable CPU times using standard optimisation software. We have applied the proposed hybrid method to a set of industrial problem instances and found that the method outperforms state-of-the-art methods.