Error probability in synchronous digital circuits due to power supply noise

This paper presents a probabilistic approach to model the problem of power supply voltage fluctuations. Error probability calculations are shown for some 90-nm technology digital circuits.The analysis here considered gives the timing violation error probability as a new design quality factor in front of conventional techniques that assume the full perfection of the circuit. The evaluation of the error bound can be useful for new design paradigms where retry and self-recoveringtechniques are being applied to the design of high performance processors. The method here described allows to evaluate the performance of these techniques by means of calculating the expected error probability in terms of power supply distribution quality.

The Gaussian assumption in second-order estimation problems in digital communications

This paper deals with the goodness of the Gaussian assumption when designing second-order blind estimationmethods in the context of digital communications. The low- andhigh-signal-to-noise ratio (SNR) asymptotic performance of the maximum likelihood estimator—derived assuming Gaussiantransmitted symbols—is compared with the performance of the optimal second-order estimator, which exploits the actualdistribution of the discrete constellation. The asymptotic study concludes that the Gaussian assumption leads to the optimalsecond-order solution if the SNR is very low or if the symbols belong to a multilevel constellation such as quadrature-amplitudemodulation (QAM) or amplitude-phase-shift keying (APSK). On the other hand, the Gaussian assumption can yield importantlosses at high SNR if the transmitted symbols are drawn from a constant modulus constellation such as phase-shift keying (PSK)or continuous-phase modulations (CPM). These conclusions are illustrated for the problem of direction-of-arrival (DOA) estimation of multiple digitally-modulated signals.

A performance lower bound for quadratic timing recovery accounting for the symbol transition density

The symbol transition density in a digitally modulated signal affects the performance of practical synchronization schemes designed for timing recovery. This paper focuses on the derivation of simple performance limits for the estimation of the time delay of a noisy linearly modulated signal in the presence of various degrees of symbol correlation produced by the varioustransition densities in the symbol streams. The paper develops high- and low-signal-to-noise ratio (SNR) approximations of the so-called (Gaussian) unconditional Cramér–Rao bound (UCRB),as well as general expressions that are applicable in all ranges of SNR. The derived bounds are valid only for the class of quadratic, non-data-aided (NDA) timing recovery schemes. To illustrate the validity of the derived bounds, they are compared with the actual performance achieved by some well-known quadratic NDA timing recovery schemes. The impact of the symbol transitiondensity on the classical threshold effect present in NDA timing recovery schemes is also analyzed. Previous work on performancebounds for timing recovery from various authors is generalized and unified in this contribution.

Statistical reference criteria for adaptive signal processing in digital communications

A general criterion for the design of adaptive systemsin digital communications called the statistical reference criterionis proposed. The criterion is based on imposition of the probabilitydensity function of the signal of interest at the outputof the adaptive system, with its application to the scenario ofhighly powerful interferers being the main focus of this paper.The knowledge of the pdf of the wanted signal is used as adiscriminator between signals so that interferers with differingdistributions are rejected by the algorithm. Its performance isstudied over a range of scenarios. Equations for gradient-basedcoefficient updates are derived, and the relationship with otherexisting algorithms like the minimum variance and the Wienercriterion are examined.

Modelado, simulación y control digital de autogiros

Este proyecto consiste en diseñar el algoritmo de control de un autogiro no tripulado. Su aplicación principal es llevar a cabo tareas rutinarias o peligrosas para el piloto como, por ejemplo, extinción de incendios, evaluación de riesgo químico o vigilancia de lugares de acceso restringido. Se realiza un estudio del movimiento del vehículo para obtener su modelo dinámico. A partir de las ecuaciones que describen su movimiento, se realiza una simulación numérica del vehículo. Se incorpora el controlador diseñado y se evalúa su funcionamiento. Finalmente, se implementa el sistema en un microcontrolador.

The role of causal links in performance measurement models

Abstract Purpose: Several well-known managerial accounting performance measurement models rely on causal assumptions. Whilst users of the models express satisfaction and link them with improved organizational performance, academic research, of the realworld applications, shows few reliable statistical associations. This paper provides a discussion on the"problematic" of causality in a performance measurement setting. Design/methodology/approach: This is a conceptual study based on an analysis and synthesis of the literature from managerial accounting, organizational theory, strategic management and social scientific causal modelling. Findings: The analysis indicates that dynamic, complex and uncertain environments may challenge any reliance upon valid causal models. Due to cognitive limitations and judgmental biases, managers may fail to trace correct cause-and-effect understanding of the value creation in their organizations. However, even lacking this validity, causal models can support strategic learning and perform as organizational guides if they are able to mobilize managerial action. Research limitations/implications: Future research should highlight the characteristics necessary for elaboration of convincing and appealing causal models and the social process of their construction. Practical implications: Managers of organizations using causal models should be clear on the purposes of their particular models and their limitations. In particular, difficulties are observed in specifying detailed cause and effect relations and their potential for communicating and directing attention. They should therefore construct their models to suit the particular purpose envisaged. Originality/value: This paper provides an interdisciplinary and holistic view on the issue of causality in managerial accounting models.

Certificação digital de exames em telerradiologia: um alerta necessário

A crescente popularização das atividades de telemedicina em todo o mundo tem exigido de médicos e demais profissionais da saúde novas abordagens em sua prática profissional. No que se refere à telerradiologia, observamos forte tendência à transformação de documentos clínicos - como resultados de exames, que até hoje existiam na forma de filmes impressos e laudos em papel - em documentos eletrônicos, disponibilizados em redes internas de clínicas e hospitais, ou pela internet. Esta tendência torna necessária a divulgação e o esclarecimento de conceitos como a certificação digital, a criptografia de dados na internet, a confiabilidade de sites, o documento eletrônico confiável e a assinatura digital. Os princípios básicos desses conceitos, embora por vezes complexos para os profissionais da saúde, podem ser compreendidos de forma efetiva sem que o leitor tenha de mergulhar de cabeça em labirintos como a matemática da criptografia de chaves assimétricas ou os protocolos de comunicação digital de dados. Neste artigo abordaremos de forma direta e com exemplos práticos os aspectos de segurança e confiabilidade de documentos clínicos eletrônicos baseados na internet, com o objetivo de que os usuários médicos possam interagir de forma informada, segura e bem fundamentada com serviços de telerradiologia.

Improving the performance of the single-dish Cherenkov telescope MAGIC through the use of signal timing

The Cherenkov light flashes produced by Extensive Air Showers are very short in time. A high bandwidth and fast digitizing readout, therefore, can minimize the influence of the background from the light of the night sky, and improve the performance in Cherenkov telescopes. The time structure of the Cherenkov image can further be used in single-dish Cherenkov telescopes as an additional parameter to reduce the background from unwanted hadronic showers. A description of an analysis method which makes use of the time information and the subsequent improvement on the performance of the MAGIC telescope (especially after the upgrade with an ultra fast 2 GSamples/s digitization system in February 2007) will be presented. The use of timing information in the analysis of the new MAGIC data reduces the background by a factor two, which in turn results in an enhancement of about a factor 1.4 of the flux sensitivity to point-like sources, as tested on observations of the Crab Nebula.

Microcalcification evaluation in computer assisted diagnosis for digital mammography

In order to develop applications for z;isual interpretation of medical images, the early detection and evaluation of microcalcifications in digital mammograms is verg important since their presence is oftenassociated with a high incidence of breast cancers. Accurate classification into benign and malignant groups would help improve diagnostic sensitivity as well as reduce the number of unnecessa y biopsies. The challenge here is the selection of the useful features to distinguish benign from malignant micro calcifications. Our purpose in this work is to analyse a microcalcification evaluation method based on a set of shapebased features extracted from the digitised mammography. The segmentation of the microcalcificationsis performed using a fixed-tolerance region growing method to extract boundaries of calcifications with manually selected seed pixels. Taking into account that shapes and sizes of clustered microcalcificationshave been associated with a high risk of carcinoma based on digerent subjective measures, such as whether or not the calcifications are irregular, linear, vermiform, branched, rounded or ring like, our efforts were addressed to obtain a feature set related to the shape. The identification of the pammeters concerning the malignant character of the microcalcifications was performed on a set of 146 mammograms with their real diagnosis known in advance from biopsies. This allowed identifying the following shape-based parameters as the relevant ones: Number of clusters, Number of holes, Area, Feret elongation, Roughness, and Elongation. Further experiments on a set of 70 new mammogmms showed that the performance of the classification scheme is close to the mean performance of three expert radiologists, which allows to consider the proposed method for assisting the diagnosis and encourages to continue the investigation in the senseof adding new features not only related to the shape

Shout and Act: an Algorithm for Digital Objects Preservation Inspired from Rescue Robots

We adapt the Shout and Act algorithm to Digital Objects Preservation where agents explore file systems looking for digital objects to be preserved (victims). When they find something they “shout” so that agent mates can hear it. The louder the shout, the urgent or most important the finding is. Louder shouts can also refer to closeness. We perform several experiments to show that this system works very scalably, showing that heterogeneous teams of agents outperform homogeneous ones over a wide range of tasks complexity. The target at-risk documents are MS Office documents (including an RTF file) with Excel content or in Excel format. Thus, an interesting conclusion from the experiments is that fewer heterogeneous (varying skills) agents can equal the performance of many homogeneous (combined super-skilled) agents, implying significant performance increases with lower overall cost growth. Our results impact the design of Digital Objects Preservation teams: a properly designed combination of heterogeneous teams is cheaper and more scalable when confronted with uncertain maps of digital objects that need to be preserved. A cost pyramid is proposed for engineers to use for modeling the most effective agent combinations

Digital social media: An interactive technology incorporated as a competitive advantage for business

In a more transparent and dynamic world, in which consumers trust other consumers more for advice and recommendations on products and services, the continuity of organizations appears to be associated with socialization, the sharing of interests and the interaction with the audience. This is associated with the incorporation of digital technologies to business, specifically the use of social media. Consequently, it is timely and interesting to explore the phenomenon of virtual socialization, although it is a littlestudied field and what is needed is an innovative and theoretical approach based upon theories of marketing and communication. Expertise in these areas is present in all organizations and their performance is important for appropriate development of them. This work is a qualitative analysis about the behavior, reactions and attitudes of individuals to organizations, in order to understand the social factors that contribute to sustainable competitive advantages of organizations which can support strategic and future actions. We conclude that relevant factors associated with the tacit knowledge of the organization, specifically to learning and social interaction of the organization and their knowledge of virtual communities. The higher the coexistence of factors, the more difficult is the replication and greater will be the hypothesis of sustainable competitive advantage.

Positron measurements in Mg-doped GaN and development of digital Doppler broadening spectroscopy

In this work parameters of Mg-doped GaN samples were studied using positron annihilation spectroscopy and analyzed. It is shown that gallium vacancies exist in an unintentionally doped sample. Next, the sample with higher concentration of Mg and low growth temperature contains vacancy clusters. In case of low concentration of Mg the growth temperature does not affect the formation of defects. Analog electronics can be replaced by a modern digital device. While promising a high quantity of benefits, the performance of these digitizers requires thorough adjustment. A 14-bit two channel digitizer has been tested in order to achieve better performance than the one of a traditional analog setup, and the adjustment process is described. It has been shown that the digital device is unable to achieve better energy resolution, but it is quite close to the corresponding attribute of the available analog system, which had been used for measurements in Mg-doped GaN.

Records of performance and sanitary status from a dairy cattle herd in southern Brazil

Over the last decades, the emphasis on the health of dairy cows has changed from an individual to a herd level. In this scenario, the role played by the recording system and its interpretation by veterinarians has gained primordial importance. The records of productive and reproductive performance and of sanitary status from a southern Brazilian dairy cattle herd have been presented and discussed. The period of study was 2000-2009. Mean values per lactation period were 349D 8436M 290F 275P 201SCS (D: days in lactation, M: kg of milk yield, F: kg of fat, P: kg of protein and SCS: somatic cell score in 1000 cells/ml of milk). Major indexes of reproductive efficiency included age at first calving (31 months), services per conception (2.1), intercalving interval (428 days), calving to conception interval (146 days), mean annual rates of parturitions (76.2%), fetal losses (9.8-19.0%), and stillbirths (3.6%), apart of voluntary waiting period (94 days). Main information on sanitary status of the herd was associated with the mean prevalence of common disorders of dairy cattle such as anaplasmosis (29.8%), mastitis (27.8%), digital diseases (26.3%), ovarian cysts (21.3%), placental retention (19.7%), postpartum uterine infections (10.6%), and calf diarrhea (23.7%) and pneumonia (16.8%), among others. In addition, culling reasons (low reproductive performance [56.3%] and udder/mastitis problems [33.6%]), causes of cattle deaths (anaplasmosis [16.4%] and leukosis [11.4]), and the impact of cattle diseases such as tuberculosis, leukosis, and neosporosis on the herd have also been presented and succinctly discussed. Numbers between brackets represent rates accumulated in the 10-year period.

Evaluating digital marketing content management strategies in an international company.

The purpose of this thesis is to explore a different kind of digital content management model and to propose a process in order to manage properly the content on an organization’s website. This process also defines briefly the roles and responsibilities of the different actors implicated. In order to create this process, the thesis has been divided into two parts. First, the theoretical analysis helps to find the two main different content management models, content management adaptation and content management localization model. Each of these models, have been analyzed through a SWOT model in order to identify their particularities and which of them is the best option according to particular organizational objectives. In the empirical part, this thesis has measured the organizational website performance comparing two main data. On one hand, the international website is analyzed in order to identify the results of the content management standardization. On the other hand, content management adaptation, also called content management localization model, is analyzed by looking through the key measure of the Dutch page from the same organization. The resulted output is a process model for localization as well as recommendations on how to proceed when creating a digital content management strategy. However, more research is recommended to provide more comprehensive managerial solutions.