Síntese e caracterização de cátodos de perovskitas 'La IND.0,6''Sr IND.0,4''Fe IND.y''Co IND.1-y''O IND.3-'delta'', para células a combustível de eletrólito sólido (SOFC) operando em temperaturas intermediárias

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência das técnicas de cimentação, fundição em monobloco e brasagem na adaptação de componentes protéticos de próteses sobre implantes fundidos em Cr-Co

O presente estudo avaliou a adaptação da interface implante/componente protético, utilizando pilares Micro-Units com seus respectivos copings acrílicos (Conexão Sistemas de Prótese – São Paulo – SP – Brasil) e UCLAs (Conexão Sistemas de Prótese – São Paulo – SP – Brasil), por meio de três diferentes técnicas: cimentação (grupo 1), fundição em monobloco (grupo 2) e fundição e brasagem (grupo 3). Foram confeccionados 20 corpos - de- prova, cada corpo apresentava 3 componentes protéticos e duas barras que os unia. Foram utilizados 30 componentes protéticos Micro-Units, 30 copings acrílicos dos Micro-Units (Conexão Sistemas de Prótese – São Paulo – SP – Brasil) e 30 UCLAs (Conexão Sistemas de Prótese – São Paulo – SP – Brasil). Também foram usadas 40 barras cilíndricas de 2mm de diâmetro, obtidas a partir de uma matriz. Cada grupo tinha 10 corpos-de-prova. Os corpos-deprova foram divididos inicialmente em dois grupos. No grupo 1 foram utilizados componentes protéticos Micro-Units e seus respectivos copings acrílicos, os quais foram fundidos em Cr-Co, parafusados e cimentados sobre os Micro-Units. No grupo 2 os componentes protéticos calcináveis (UCLA), foram fundidos em monobloco utilizando-se Cr-Co. Posteriormente foi realizada a separação das peças em monobloco do grupo 2, o qual passou a ser chamado de grupo 3, sendo então submetido à brasagem. Todos os grupos foram mensurados em um estereomicroscópio (SZX12, Olympus, Japan) com aumento de 60X em relação à adaptação, antes e após os procedimentos para a obtenção das estruturas, através de cada técnica. Os resultados mostraram que o grupo 1 apresentou uma adaptação estatisticamente superior, inicial (0,000μm) e final (3,588μm), em relação aos grupos 2 (9,252μm e 325,259μm) e 3 (0,874μm e 121,592μm). O grupo 3 apresentou uma melhora significativa em relação ao grupo 2. A técnica com melhor adaptação foi a cimentação.

Performance of a poly(2,5-benzimidazole)-based polymer electrolyte membrane fuel cell

The performance of an ABPBI-based High Temperature H-2/O-2 PEMFC system was studied under different experimental conditions. Increasing the temperature from 130 to 170 degrees C improved the cell performance, even though further increase was not beneficial for the system. Humidification of the H-2 stream ameliorated this behaviour, even though operating above 170 degrees C is not advisable in terms of cell performance. A significant electrolyte dehydration seems to negatively affect the fuel cell performance, especially in the case of the anode. In the presence of 2% vol. CO in the H-2 stream, the temperature exerted a positive effect on the cell performance, reducing the strong adsorption of this poison on the platinum sites. Moreover, humidification of the H-2 + CO stream increased the maximum power densities of the cell, further alleviating the CO poisoning effects. Actual CO-O-2 fuel cell results confirmed the significant beneficial effect of the relative humidity on the kinetics of the CO oxidation process. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

SGLT2 inhibitors:glucuretic treatment for type 2 diabetes

Sodium glucose co-transporter-2 (SGLT2) inhibitors offer a novel approach to treat diabetes by reducing hyperglycaemia via increased glucosuria. This approach reduces renal glucose reabsorption in the proximal renal tubules providing an insulin-independent mechanism to lower blood glucose. The glucuretics are advanced in clinical development and dapagliflozin has received most extensive study. Once daily dapaglifolozin as monotherapy or as add-on to metformin for 12-24 weeks in type 2 diabetic patients (baseline HbA 8-9%) reduced HbA by about 0.5-1%, accompanied by weight loss (2-3 kg) and without significant risk of hypoglycaemia. Dapagliflozin has reduced insulin requirement and improved glycaemic control without weight gain in insulin-treated patients. A mild osmotic diuresis associated with glucuretic therapy may account for a small increase in haematocrit (1-2%) and reduced blood pressure (2-5 mmHg). Dehydration and altered electrolyte balance have not been encountered. Urinary tract and genital infections increased in most studies with dapagliflozin, but were typically mild - resolving with selfmedication or standard intervention. Thus glucuretics provide a novel insulin-independent approach for control of hyperglycaemia which does not incur hypoglycaemia, promotes weight loss, may reduce blood pressure and offers compatibility with other glucose-lowering agents. © 2010 The Author(s).

Síntese e caracterização de pigmentos nanométricos encapsulados pelos métodos dos precursores poliméricos, hidrotermal de microondas e co-precipitação associado à química sol-gel convencional

The demand for materials with high consistency obtained at relatively low temperatures has been leveraging the search for chemical processes substituents of the conventional ceramic method. This paper aims to obtain nanosized pigments encapsulated (core-shell) the basis of TiO2 doped with transition metals (Fe, Co, Ni, Al) through three (3) methods of synthesis: polymeric precursors (Pechini); hydrothermal microwave, and co-precipitation associated with the sol-gel chemistry. The study was motivated by the simplicity, speed and low power consumption characteristic of these methods. Systems costs are affordable because they allow achieving good control of microstructure, combined with high purity, controlled stoichiometric phases and allowing to obtain particles of nanometer size. The physical, chemical, morphological, structural and optical properties of the materials obtained were analyzed using different techniques for materials characterization. The powder pigments were tested in discoloration and degradation using a photoreactor through the solution of Remazol yellow dye gold (NNI), such as filtration, resulting in a separation of solution and the filter pigments available for further UV-Vis measurements . Different calcination temperatures taken after obtaining the post, the different methods were: 400 º C and 1000 º C. Using a fixed concentration of 10% (Fe, Al, Ni, Co) mass relative to the mass of titanium technologically and economically enabling the study. By transmission electron microscopy (TEM) technique was possible to analyze and confirm the structural formation nanosized particles of encapsulated pigment, TiO2 having the diameter of 20 nm to 100 nm, and thickness of coated layer of Fe, Ni and Co between 2 nm and 10 nm. The method of synthesis more efficient has been studied in the work co-precipitation associated with sol-gel chemistry, in which the best results were achieved without the need for the obtainment of powders the calcination process

Obtenção de Mo2C com adição de Co por reação gás-sólido em reator de leito fixo

Sulfur compounds emissions have been, on the late years, subject to more severe environmental laws due to its impact on the environment (causing the acid rain phenomena) and on human health. It has also been object of much attention from the refiners worldwide due to its relationship with equipment’s life, which is decreased by corrosion, and also with products’ quality, as the later may have its color, smell and stability altered by the presence of such compounds. Sulfur removal can be carried out by hydrotreating (HDT) which is a catalytic process. Catalysts for HDS are traditionally based on Co(Ni)-Mo(W)/Al2O3. However, in face of the increased contaminants’ content on crude oil, and stricter legislation on emissions, the development of new, more active and efficient catalysts is pressing. Carbides of refractory material have been identified as potential materials for this use. The addition of a second metal to carbides may enhance catalytic activities by increasing the density of active sites. In the present thesis Mo2C with Co addition was produced in a fixed bed reactor via gas-solid reaction of CH4 (5%) and H2(95%) with a precursor made of a mix of ammonium heptamolybdate [(NH4)6[Mo7O24].4H2O] and cobalt nitrate[Co(NO3)2.6H2O] at stoichiometric amounts. Precursors’ where analyzed by XRF, XRD, SEM and TG/DTA. Carboreduction reactions were carried out at 700 and 750°C with two cobalt compositions (2,5 and 5%). Reaction’s products were characterized by XRF, XRD, SEM, TOC, BET and laser granulometry. It was possible to obtain Mo2C with 2,5 and 5% cobalt addition as a single phase at 750°C with nanoscale crystallite sizes. At 700°C, however, both MoO2 and Mo2C phases were found by XRD. No Co containing phases were found by XRD. XRF, however, confirmed the intended Co content added. SEM images confirmed XRD data. The increase on Co content promoted a more severe agglomeration of the produced powder. The same effect was noted when the reaction temperature was increased. The powder synthesized at 750°C with 2,5% Co addition TOC analysis indicated the complete conversion from oxide material to carbide, with a 8,9% free carbon production. The powder produced at this temperature with 5% Co addition was only partially converted (86%)

Aspetti meccanicistici della coordinazione di [(PPh3)3Ru(CO)(H2)] com Timina Acido Acetico

Ruthenium complexes have proved to exhibit antineoplastic activity related to the interaction of metal ion with DNA nucleobases. It is indeed of great interest to provide new insights on theses cutting-edge studies, such as the identification of distinct coordinative modes of DNA binding sites. During the investigation on the reaction between [(PPh3)3Ru(CO)(H)2], 1, and the Thymine Acetic Acid (THA) as model for nucleobases, we identified an unstable monohapto hydride acetate complex 2, which rapidly evolves into elusive intermediates whose nature was evidenced by NMR spectra and DFT calculations. We obtained crystals of [(PPh3)2Ru(CO)(k1-THA)(k2-THA)] 17, and [Ru(CO)(PPh3)2(k2-N,O)-[THA(A)];(k1-O)[THA(B)]2 18, phosphine ligands assuming cis conformation. The thesis deals on the analogue reactions of 1 with acetic acid by varying different parameters and operating conditions. The reaction yields to the hydride dihapto-acetate [(PPh3)2RuH(CO)(k2-Ac)] 8 through the related meridian monohapto, by releasing of phosphine ligand. However, the reaction yields a mixture of compounds, in which the dihapto hydride complex 8 is prevailing in any cases and does not provide any disclosure for the proposed mechanistic aspects. The reaction with two equivalents of acetic acid, affords the complex [(PPh3)2Ru(CO)(k1-Ac)(k2-Ac)] 11, exhibiting mutual trans:cis locations in 2:1 ratio for the phosphine. Such evidence agrees with the results obtained DFT calculations in vacuo, whereas it is in contrast with those obtained with the THA. Therefore we can inferred that the products obtained from the latter reaction is intermolecularly ruled by the hydrogen binding interactions between the functions [-NH•••(O)C-] in the two coordinated thymine ligands.

Flexible and rigid amine-functionalized microporous frameworks based on different secondary building units: supramolecular isomerism, selective CO₂ capture, and catalysis

We report the synthesis, structural characterization, and porous properties of two isomeric supramolecular complexes of ([Cd(NH₂—bdc)(bphz)_0.5 ]⋅DMF⋅H₂O}_n (NH₂ —bdc=2-aminobenzenedicarboxylic acid, bphz=1,2-bis(4-pyridylmethylene)hydrazine) composed of a mixed-ligand system. The first isomer, with a paddle-wheel-type Cd₂ (COO)₄ secondary building unit (SBU), is flexible in nature, whereas the other isomer has a rigid framework based on a μ-oxo-bridged Cd₂(μ-OCO)₂ SBU. Both frameworks are two-fold interpenetrated and the pore surface is decorated with pendant -NH₂ and =N—N= functional groups. Both the frameworks are nonporous to N₂ , revealed by the type II adsorption profiles. However, at 195 K, the first isomer shows an unusual double-step hysteretic CO₂ adsorption profile, whereas the second isomer shows a typical type I CO₂ profile. Moreover, at 195 K, both frameworks show excellent selectivity for CO₂ among other gases (N₂ , O₂ , H₂ , and Ar), which has been correlated to the specific interaction of CO₂ with the -NH₂ and =N—N= functionalized pore surface. DFT calculations for the oxo-bridged isomer unveiled that the -NH₂ group is the primary binding site for CO₂ . The high heat of CO₂ adsorption (ΔH_ads =37.7 kJ mol^-1) in the oxo-bridged isomer is realized by NH₂ ⋅⋅⋅CO₂ /aromatic π⋅⋅⋅CO₂ and cooperative CO₂ ⋅⋅⋅CO₂ interactions. Further, postsynthetic modification of the -NH₂ group into -NHCOCH₃ in the second isomer leads to a reduced CO₂ uptake with lower binding energy, which establishes the critical role of the -NH₂ group for CO₂ capture. The presence of basic -NH₂ sites in the oxo-bridged isomer was further exploited for efficient catalytic activity in a Knoevenagel condensation reaction.

Cleavage of Ru-C(aryl) bond of a four-membered ortho-metalated ruthenium(II) organometallics by mercaptopyrimidine and pyridine-2,6-dicarboxylate ligands: spectroscopic, structural and computational studies

The heterogeneous phase reaction of Ru(η2-RL)(PPh3)2(CO)Cl (1) with 2-mercaptopyrimidine(pymSH) and pyridine-2,6-dicarboxylate(dipic) ligands afforded the complexes of the type Ru(PPh3)(CO)(pymS)2 (2) and Ru(PPh3)2(CO)(dipic) (3) in excellent yield respectively. The chelation of pymS/dipic is attended with the cleavage of Ru-O, Ru-Cl and Ru-C(aryl) bonds and the RL ligand is no longer coordinated with the metal center in the products. The spectral (UV-Vis, IR, 1H NMR) and electrochemical data of the complexes are included. In dichloromethane solution both 2 and 3 display one quasi-reversible RuIII/RuII cyclic voltammetric response with E1/2 in the range 1.15-1.50 V vs Ag/AgCl. Structure determinations of 2 and the solvate 3·CH3CN have revealed distorted octahedral RuCN2S2P coordination sphere for 2 and RuCNO2P2 coordination sphere for 3·CH3CN. For 2 the pairs (P, N), (S, S) and (C, N) define the three trans directions whereas for 3·CH3CN those pairs are (P, P), (C, N) and (O, O). The electronic structures and the absorption spectra of 2 and 3 are also scrutinized by the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) analysis.

Développement des bétons autoplaçants à faible teneur en poudre, Éco-BAP: formulation et performance

Abstract : Although concrete is a relatively green material, the astronomical volume of concrete produced worldwide annually places the concrete construction sector among the noticeable contributors to the global warming. The most polluting constituent of concrete is cement due to its production process which releases, on average, 0.83 kg CO[subscript 2] per kg of cement. Self-consolidating concrete (SCC), a type of concrete that can fill in the formwork without external vibration, is a technology that can offer a solution to the sustainability issues of concrete industry. However, all of the workability requirements of SCC originate from a higher powder content (compared to conventional concrete) which can increase both the cost of construction and the environmental impact of SCC for some applications. Ecological SCC, Eco-SCC, is a recent development combing the advantages of SCC and a significantly lower powder content. The maximum powder content of this concrete, intended for building and commercial construction, is limited to 315 kg/m[superscript 3]. Nevertheless, designing Eco-SCC can be challenging since a delicate balance between different ingredients of this concrete is required to secure a satisfactory mixture. In this Ph.D. program, the principal objective is to develop a systematic design method to produce Eco-SCC. Since the particle lattice effect (PLE) is a key parameter to design stable Eco-SCC mixtures and is not well understood, in the first phase of this research, this phenomenon is studied. The focus in this phase is on the effect of particle-size distribution (PSD) on the PLE and stability of model mixtures as well as SCC. In the second phase, the design protocol is developed, and the properties of obtained Eco-SCC mixtures in both fresh and hardened states are evaluated. Since the assessment of robustness is crucial for successful production of concrete on large-scale, in the final phase of this work, the robustness of one the best-performing mixtures of Phase II is examined. It was found that increasing the volume fraction of a stable size-class results in an increase in the stability of that class, which in turn contributes to a higher PLE of the granular skeleton and better stability of the system. It was shown that a continuous PSD in which the volume fraction of each size class is larger than the consecutive coarser class can increase the PLE. Using such PSD was shown to allow for a substantial increase in the fluidity of SCC mixture without compromising the segregation resistance. An index to predict the segregation potential of a suspension of particles in a yield stress fluid was proposed. In the second phase of the dissertation, a five-step design method for Eco-SCC was established. The design protocol started with the determination of powder and water contents followed by the optimization of sand and coarse aggregate volume fractions according to an ideal PSD model (Funk and Dinger). The powder composition was optimized in the third step to minimize the water demand while securing adequate performance in the hardened state. The superplasticizer (SP) content of the mixtures was determined in next step. The last step dealt with the assessment of the global warming potential of the formulated Eco-SCC mixtures. The optimized Eco-SCC mixtures met all the requirements of self-consolidation in the fresh state. The 28-day compressive strength of such mixtures complied with the target range of 25 to 35 MPa. In addition, the mixtures showed sufficient performance in terms of drying shrinkage, electrical resistivity, and frost durability for the intended applications. The eco-performance of the developed mixtures was satisfactory as well. It was demonstrated in the last phase that the robustness of Eco-SCC is generally good with regards to water content variations and coarse aggregate characteristics alterations. Special attention must be paid to the dosage of SP during batching.

Synthesis and characterisation of cobalt hydroxide, cobalt oxyhydroxide and cobalt oxide nanodiscs

Cobalt hydroxide, cobalt oxyhydroxide and cobalt oxide nanomaterials were synthesized through simple soft chemistry. The cobalt hydroxide displays hexagonal morphology with clear edges 20 nm long. This morphology and nanosize is retained through to cobalt oxide Co3O4 through a topotactical relationship. Cobalt oxyhydroxide and cobalt oxide nanomaterials were synthesized through oxidation and low temperature calcination from the as-prepared cobalt hydroxide. Characterisation of these cobalt-based nanomaterials were fully developed, including X-ray diffraction, transmission electron microscopy combined with selected area electron diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and thermal gravimetric analysis. Bonding of the divalent cobalt hydroxide from the oxyhydroxide and oxides by studying their high resolution XPS spectra for Co 2p3/2 and O 1s. Raman spectroscopy of the as-prepared Co(OH)2, CoO(OH) and Co3O4 nanomaterials characterised each material. The thermal stability of the materials Co(OH)2 and CoO(OH) were established. This research has developed methodology for the synthesis of cobalt oxide and cobalt oxyhydroxide nanodiscs at low temperatures.

Influence of biochars on flux of N2O and CO2 from Ferrosol

Biochars produced by slow pyrolysis of greenwaste (GW), poultry litter (PL), papermill waste (PS), and biosolids (BS) were shown to reduce N₂O emissions from an acidic Ferrosol. Similar reductions were observed for the untreated GW feedstock. Soil was amended with biochar or feedstock giving application rates of 1 and 5%. Following an initial incubation, nitrogen (N) was added at 165 kg/ha as urea. Microcosms were again incubated before being brought to 100% water-filled porosity and held at this water content for a further 47 days. The flooding phase accounted for the majority (<80%) of total N₂O emissions. The control soil released 3165 mg N₂O-N/m², or 15.1% of the available N as N₂O. Amendment with 1 and 5% GW feedstock significantly reduced emissions to 1470 and 636 mg N₂O-N/m², respectively. This was equivalent to 8.6 and 3.8% of applied N. The GW biochar produced at 350°C was least effective in reducing emissions, resulting in 1625 and 1705 mg N₂O-N/m² for 1 and 5% amendments. Amendment with BS biochar at 5% had the greatest impact, reducing emissions to 518 mg N₂O-N/m², or 2.2% of the applied N over the incubation period. Metabolic activity as measured by CO₂ production could not explain the differences in N₂O emissions between controls and amendments, nor could NH₄⁺ or NO₃^– concentrations in biochar-amended soils. A decrease in NH₄⁺ and NO₃^– following GW feedstock application is likely to have been responsible for reducing N₂O emissions from this amendment. Reduction in N₂O emissions from the biochar-amended soils was attributed to increased adsorption of NO₃^–. Small reductions are possible due to improved aeration and porosity leading to lower levels of denitrification and N₂O emissions. Alternatively, increased pH was observed, which can drive denitrification through to dinitrogen during soil flooding.

Synthesis and characterisation of metal oxyhydroxide and oxide nanomaterials

In this work, a range of nanomaterials have been synthesised based on metal oxyhydroxides MO(OH), where M=Al, Co, Cr, etc. Through a self-assembly hydrothermal route, metal oxyhydroxide nanomaterials with various morphologies were successfully synthesised: one dimensional boehmite (AlO(OH)) nanofibres, zero dimensional indium hydroxide (In(OH)3) nanocubes and chromium oxyhydroxide (CrO(OH)) nanoparticles, as well as two dimensional cobalt hydroxide and oxyhydroxide (Co(OH)2 & CoO(OH)) nanodiscs. In order to control the synthetic nanomaterial morphology and growth, several factors were investigated including cation concentration, temperature, hydrothermal treatment time, and pH. Metal ion doping is a promising technique to modify and control the properties of materials by intentionally introducing impurities or defects into the material. Chromium was successfully applied as a dopant for fabricating doped boehmite nanofibres. The thermal stability of the boehmite nanofibres was enhanced by chromium doping, and the photoluminescence property was introduced to the chromium doped alumina nanofibres. Doping proved to be an efficient method to modify and functionalize nanomaterials. The synthesised nanomaterials were fully characterised by X-ray diffraction (XRD), transmission electron microscopy (TEM) combined with selected area electron diffraction (SAED), scanning electron microscopy (SEM), BET specific surface area analysis, X-ray photoelectron spectroscopy (XPS) and thermo gravimetric analysis (TGA). Hot-stage Raman and infrared emission spectroscopy were applied to study the chemical reactions during dehydration and dehydroxylation. The advantage of these techniques is that the changes in molecular structure can be followed in situ and at the elevated temperatures.

Kaolin derivatives

Amorphous derivatives of kaolin group minerals characterized by high specific surfaces and/or high cation exchange capacities and a .sup.27 AL MAS NMR spectrum having a dominant peak at about 55 ppm relative to Al(H.sub.2 O).sub.6.sup.3+. Such derivatives are prepared by reacting a kaolin group mineral with a reagent, such as, an alkali metal halide or an ammonium halide which converts the majority of the octahedrally coordinated aluminum in the kaolin group mineral to tetrahedrally coordinated aluminum. Such derivatives show high selectivity in its cation exchange towards the metals: Pb.sup.2+, Cu.sup.2+, Cd.sup.2+, Ni.sup.2+, CO.sup.2+, Cr.sup.3+, Sr.sup.2-, Zn.sup.2+, Nd.sup.3+ and UO.sub.2.sup.+.

Preparation of metal-TCNQ charge-transfer complexes on conducting and insulating surfaces by photocrystallization

A generic method for the synthesis of metal-7,7,8,8-tetracyanoquinodimethane (TCNQ) charge-transfer complexes on both conducting and nonconducting substrates is achieved by photoexcitation of TCNQ in acetonitrile in the presence of a sacrificial electron donor and the relevant metal cation. The photochemical reaction leads to reduction of TCNQ to the TCNQ- monoanion. In the presence of Mx+(MeCN), reaction with TCNQ-(MeCN) leads to deposition of Mx+[TCNQ]x crystals onto a solid substrate with morphologies that are dependent on the metal cation. Thus, CuTCNQ phase I photocrystallizes as uniform microrods, KTCNQ as microrods with a random size distribution, AgTCNQ as very long nanowires up to 30 μm in length and with diameters of less than 180 nm, and Co[TCNQ]2(H2O)2 as nanorods and wires. The described charge-transfer complexes have been characterized by optical and scanning electron microscopy and IR and Raman spectroscopy. The CuTCNQ and AgTCNQ complexes are of particular interest for use in memory storage and switching devices. In principle, this simple technique can be employed to generate all classes of metal−TCNQ complexes and opens up the possibility to pattern them in a controlled manner on any type of substrate.