Exponential stabilization for state and input delay systems via output feedback

This paper considers the exponential stabilization problem via static and dynamic output feedback controllers of linear systems with a time delay in both the state and input. By using a change of the state variable and combining with the Lyapunov-Krasovskii method, new sufficient conditions for exponential stabilization via static and dynamic output feedback controllers are proposed. The conditions are expressed in terms of matrix inequalities but with only one parameter needs to be tuned and therefore can be efficiently solved by incorporating an one-dimensional search method into the Matlab’s LMI toolbox. Two numerical examples are provided to illustrate the obtained results.

A Numerical method for the semilinear stochastic transport equation

Trabalho apresentado no XXXV CNMAC, Natal-RN, 2014.

A Higher order and stable method for the numerical integration of Random Differential Equations

Trabalho apresentado no Congresso Nacional de Matemática Aplicada à Indústria, 18 a 21 de novembro de 2014, Caldas Novas - Goiás

The Poisson-exponential regression model under different latent activation schemes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Growth rates in modern speleothems from Santana Cave, Brazil, by the Pb-210-method

The Santana Cave is located at the Upper Ribeira Touristic State Park (PETAR-Parque Estadual Turistico do Alto Ribeira) in southern São Paulo State, Brazil. This paper describes Pb-210 activity concentration data in soda straw stalactites samples collected at Salao das Flores in Santana Cave that is a fossil tributary of the cave river. Non-expensive alpha counting following some analytical steps for extracting and depositing Pb-210 were used for providing the Pb-210 data. In the analyzed samples, Pb-210 values of increasingly older samples fitted an exponential curve, thus suggesting that the production of Pb-210 has been constant with time. Also, the near-ideal fit indicated that the growth was uniform and there was no break in the continuous growth. The soda straw growth rates were determined from the best fit to the exponential curve through the Pb-210 activity concentration. The results of the measurements allowed estimate a longitudinal rate corresponding to 1.3 mm/yr and a lateral rate of 0.01 mm/yr, which permitted calculate times of 70 years and 317-498 years for their formation, respectively. The lateral growth rate is compatible with values from studies of chemical weathering rates held under laboratory and natural conditions. (C) 2011 Elsevier Ltd. All rights reserved.

Study of the thermal behavior of the transition phase of Co(II)-diclofenac compound by non-isothermal method

The Co(II)-diclofenac complex was evaluated by simultaneous thermogravimetry-differential thermal analysis (TG-DTA) and differential scanning calorimetry (DSC). The DTA curve profile shows one exothermic peak because of the transition phase of the compound between 170 and 180 A degrees C, which was confirmed by X-ray powder diffractometry. The transition phase behavior was studied by DSC curves at several heating rates of a sample mass between 1 and 10 mg in nitrogen atmosphere and in a crucible with and without a lid. Thus, the kinetic parameters were evaluated using an isoconversional non-linear fitting proposed by Capela and Ribeiro. The results show that the activation energy and pre-exponential factor for the transition phase is dependant on the different experimental conditions. Nevertheless, these results indicate that the kinetic compensation effect shows a relationship between them.

Variational iterative method for scattering problems

A parameter-free variational iterative method is proposed for scattering problems. The present method yields results that are far better, in convergence, stability and precision, than any other momentum space method. Accurate result is obtained for the atomic exponential (Yukawa) potential with an estimated error of less than 1 in 1015 (1010) after some 13 (10) iterations.

Numerical simulation of viscous three-dimensional flow over aerospace vehicles using Euler/boundary-layer zonal approach

This paper presents a viscous three-dimensional simulations coupling Euler and boundary layer codes for calculating flows over arbitrary surfaces. The governing equations are written in a general non orthogonal coordinate system. The Levy-Lees transformation generalized to three-dimensional flows is utilized. The inviscid properties are obtained from the Euler equations using the Beam and Warming implicit approximate factorization scheme. The resulting equations are discretized and approximated by a two-point fmitedifference numerical scheme. The code developed is validated and applied to the simulation of the flowfield over aerospace vehicle configurations. The results present good correlation with the available data.

Method for estimating railroad track settlements due to dynamic traffic loads

This paper is the result of real-scale physical modeling study designed to simulate the load-deformation characteristics of railroad foundation systems that include the railroad ties, the ballast, and the sub-base layers of a railroad embankment. The study presents comparisons of the application of dynamic loads of 100kN on the rails, and the resulting deformations during a 500,000 cycle testing period for three rail support systems; wood, concrete and steel. The results show that the deformation curve has an exponential shape, with the larger portion of the deformation occurring during the first 50,000 load cycles followed by a tendency to stabilize between 100,000 to 500,000 cycles. These results indicate that the critical phase of deformations of a new railroad is within the first 50,000 cycles of loading, and after that, it slowly attenuates as it approaches a stable value. The paper also presents empirically derived formulations for the estimation of the deformations of the rail supports as a result of rail traffic.

Stochastic exponential stability of singular linear systems with Markov jump parameters

This paper deals with exponential stability of discrete-time singular systems with Markov jump parameters. We propose a set of coupled generalized Lyapunov equations (CGLE) that provides sufficient conditions to check this property for this class of systems. A method for solving the obtained CGLE is also presented, based on iterations of standard singular Lyapunov equations. We present also a numerical example to illustrate the effectiveness of the approach we are proposing.

Effective synchronization of a class of chua's chaotic systems using an exponential feedback coupling

A robust exponential function based controller is designed to synchronize effectively a given class of Chua's chaotic systems. The stability of the drive-response systems framework is proved through the Lyapunov stability theory. Computer simulations are given to illustrate and verify the method. © 2013 Patrick Louodop et al.

Deconvolução de Euler: passado, presente e futuro – um tutorial

Neste tutorial apresentamos uma revisão da deconvolução de Euler que consiste de três partes. Na primeira parte, recordamos o papel da clássica formulação da deconvolução de Euler 2D e 3D como um método para localizar automaticamente fontes de campos potenciais anômalas e apontamos as dificuldades desta formulação: a presença de uma indesejável nuvem de soluções, o critério empírico usado para determinar o índice estrutural (um parâmetro relacionado com a natureza da fonte anômala), a exeqüibilidade da aplicação da deconvolução de Euler a levantamentos magnéticos terrestres, e a determinação do mergulho e do contraste de susceptibilidade magnética de contatos geológicos (ou o produto do contraste de susceptibilidade e a espessura quando aplicado a dique fino). Na segunda parte, apresentamos as recentes melhorias objetivando minimizar algumas dificuldades apresentadas na primeira parte deste tutorial. Entre estas melhorias incluem-se: i) a seleção das soluções essencialmente associadas com observações apresentando alta razão sinal-ruído; ii) o uso da correlação entre a estimativa do nível de base da anomalia e a própria anomalia observada ou a combinação da deconvolução de Euler com o sinal analítico para determinação do índice estrutural; iii) a combinação dos resultados de (i) e (ii), permitindo estimar o índice estrutural independentemente do número de soluções; desta forma, um menor número de observações (tal como em levantamentos terrestres) pode ser usado; iv) a introdução de equações adicionais independentes da equação de Euler que permitem estimar o mergulho e o contraste de susceptibilidade das fontes magnéticas 2D. Na terceira parte apresentaremos um prognóstico sobre futuros desenvolvimentos a curto e médio prazo envolvendo a deconvolução de Euler. As principais perspectivas são: i) novos ataques aos problemas selecionados na segunda parte deste tutorial; ii) desenvolvimento de métodos que permitam considerar interferências de fontes localizadas ao lado ou acima da fonte principal, e iii) uso das estimativas de localização da fonte anômala produzidas pela deconvolução de Euler como vínculos em métodos de inversão para obter a delineação das fontes em um ambiente computacional amigável.

Interpretação aeromagnética automática com uso da equação homogênea de Euler e sua aplicação na Bacia do Solimões

ABSTRACT: We present here a methodology for the rapid interpretation of aeromagnetic data in three dimensions. An estimation of the x, y and z coordinates of prismatic elements is obtained through the application of "Euler's Homogeneous equation" to the data. In this application, it is necessary to have only the total magnetic field and its derivatives. These components can be measured or calculated from the total field data. In the use of Euler's Homogeneous equation, the structural index, the coordinates of the corners of the prism and the depth to the top of the prism are unknown vectors. Inversion of the data by classical least-squares methods renders the problem ill-conditioned. However, the inverse problem can be stabilized by the introduction of both a priori information within the parameter vector together with a weighting matrix. The algorithm was tested with synthetic and real data in a low magnetic latitude region and the results were satisfactory. The applicability of the theorem and its ambiguity caused by the lack of information about the direction of total magnetization, inherent in all automatic methods, is also discussed. As an application, an area within the Solimões basin was chosen to test the method. Since 1977, the Solimões basin has become a center of exploration activity, motivated by the first discovery of gas bearing sandstones within the Monte Alegre formation. Since then, seismic investigations and drilling have been carried on in the region. A knowledge of basement structures is of great importance in the location of oil traps and understanding the tectonic history of this region. Through the application of this method a preliminary estimate of the areal distribution and depth of interbasement and sedimentary magnetic sources was obtained.

Complex modal analysis of a vertical rotor through finite element method

Natural frequencies were analyzed (axial, torsional and flexural) and frequency response of a vertical rotor with a hard disk at the edge through the classical and complex modal analysis. The mathematical modeling was based on the theory of Euler-Bernoulli beam. The equation that rules the movement was obtained through the Lagrangian formulation. The model considered the effects of bending, torsion and axial deformation of the shaft, besides the gravitational and gyroscopic effects. The finite element method was used to discretize the structure into hollow cylindrical elements with 12 degrees of freedom. Mass, stiffness and gyroscopic matrices were explained consistently. This type of tool, based on the use of complex coordinates to describe the dynamic behavior of rotating shaft, allows the decomposition of the system in two submodes, backward and forward. Thus, it is possible to clearly visualize that the orbit and direction of the precessional motion around the line of the rotating shaft is not deformed. A finite element program was developed using Matlab ®, and numerical simulations were performed to validate this model.

The Poisson-exponential regression model under different latent activation schemes

In this paper, a new family of survival distributions is presented. It is derived by considering that the latent number of failure causes follows a Poisson distribution and the time for these causes to be activated follows an exponential distribution. Three different activation schemes are also considered. Moreover, we propose the inclusion of covariates in the model formulation in order to study their effect on the expected value of the number of causes and on the failure rate function. Inferential procedure based on the maximum likelihood method is discussed and evaluated via simulation. The developed methodology is illustrated on a real data set on ovarian cancer.