The Economics of Reducing the County Road System: Three Case Studies in Iowa - Executive Summary, HR-242, 1986

This Executive Summary presents a brief summary of the main research report, "The Economics of Reducing the County Road System: Three Case Studies in Iowa" (DOT/OST/P-34/86-035). The case studies are described, as well as the analytic methodology and research findings.

The Economics of Reducing the County Road System: Three Case Studies in Iowa, HR-242, 1986

This research project looked at the economic benefits and costs associated with alternative strategies for abandoning low volume rural highways and bridges. Three test counties in Iowa were studied, each 100 square miles in size: Hamilton County having a high agricultural tax base and a high percentage of paved roads and few bridges; Shelby County having a relatively low agricultural tax base, hilly terrain and a low percentage of paved road and many bridges; and Linn County having a high agricultural tax base, a high percentage of paved roads and a large number of non-farm households. A questionnaire survey was undertaken to develop estimates of farm and household travel patterns. Benefits and costs associated with the abandonment of various segments of rural highway and bridge mileages in each county were calculated. "Benefits" calculated were reduced future reconstruction and maintenance costs, whereas "costs" were the added cost of travel resulting from the reduced mileage. Some of the findings suggest limited cost savings from abandonment of county roads with no property access in areas with large non-farm rural population; relatively high cost savings from the abandonment of roads with no property access in areas with small rural population; and the largest savings from the conversion of public dead-end gravel roads with property or residence accesses to private drives.

The economics of infertility

Infertility is a growing issue that affects thousands of Spanish couples; increasingly there are more and more people who cannot raise a family by themselves. Instead they have to resort to ART, adoption -local or international- or surrogacy abroad, a practice that many couples consider but that isn’t legalized in Spain. In this paper we have broken down each option in detail by analysing the market, differentiating its variants and specific steps, calculating its “price” and suggesting possible improvements that could be made from an economic perspective. We end our paper with the “SWOT” analysis of a hypothetical surrogacy market in Spain by calculating an estimated price, using the US as a reference, and the degree of acceptance it would have, based on the results of random surveys.

Economics of Using Calcium Chloride vs. Sodium Chloride for Deicing/Anti-Icing, TR-488, 2008

The use of chemicals is a critical part of a pro-active winter maintenance program. However, ensuring that the correct chemicals are used is a challenge. On the one hand, budgets are limited, and thus price of chemicals is a major concern. On the other, performance of chemicals, especially at lower pavement temperatures, is not always assured. Two chemicals that are used extensively by the Iowa Department of Transportation (Iowa DOT) are sodium chloride (or salt) and calcium chloride. While calcium chloride can be effective at much lower temperatures than salt, it is also considerably more expensive. Costs for a gallon of salt brine are typically in the range of $0.05 to $0.10, whereas calcium chloride brine may cost in the range of $1.00 or more per gallon. These costs are of course subject to market forces and will thus change from year to year. The idea of mixing different winter maintenance chemicals is by no means new, and in general discussions it appears that many winter maintenance personnel have from time to time mixed up a jar of chemicals and done some work around the yard to see whether or not their new mix “works.” There are many stories about the mixture turning to “mayonnaise” (or, more colorfully, to “snot”) suggesting that mixing chemicals may give rise to some problems most likely due to precipitation. Further, the question of what constitutes a mixture “working” in this context is a topic of considerable discussion. In this study, mixtures of salt brine and calcium chloride brine were examined to determine their ice melting capability and their freezing point. Using the results from these tests, a linear interpolation model of the ice melting capability of mixtures of the two brines has been developed. Using a criterion based upon the ability of the mixture to melt a certain thickness of ice or snow (expressed as a thickness of melt-water equivalent), the model was extended to develop a material cost per lane mile for the full range of possible mixtures as a function of temperature. This allowed for a comparison of the performance of the various mixtures. From the point of view of melting capacity, mixing calcium chloride brine with salt brine appears to be effective only at very low temperatures (around 0° F and below). However, the approach described herein only considers the material costs, and does not consider application costs or other aspects of the mixture performance than melting capacity. While a unit quantity of calcium chloride is considerably more expensive than a unit quantity of sodium chloride, it also melts considerably more ice. In other words, to achieve the same result, much less calcium chloride brine is required than sodium chloride brine. This is important in considering application costs, because it means that a single application vehicle (for example, a brine dispensing trailer towed behind a snowplow) can cover many more lane miles with calcium chloride brine than with salt brine before needing to refill. Calculating exactly how much could be saved in application costs requires an optimization of routes used in the application of liquids in anti-icing, which is beyond the scope of the current study. However, this may be an area that agencies wish to pursue for future investigation. In discussion with winter maintenance personnel who use mixtures of sodium chloride and calcium chloride, it is evident that one reason for this is because the mixture is much more persistent (i.e. it stays longer on the road surface) than straight salt brine. Operationally this persistence is very valuable, but at present there are not any established methods to measure the persistence of a chemical on a pavement. In conclusion, the study presents a method that allows an agency to determine the material costs of using various mixtures of salt brine and calcium chloride brine. The method is based upon the requirement of melting a certain quantity of snow or ice at the ice-pavement interface, and on how much of a chemical or of a mixture of chemicals is required to do that.

Conceptualising the economics of plant health protection against invasive pests

Selostus: Tulokastuholaiset ja kasvinsuojelu : taloudellinen näkökulma

Benchmarking project of the Department of Electrical Engineering of Lappeenranta University of Technology

Lappeenrannan teknillisen korkeakoulun sähkötekniikan osasto muutti 1.8.2005 sähkötekniikan tutkinnon kaksiportaiseksi ja vastaamaan näin Bologna-prosessia ja Suomen yliopistolainsäädäntöä. Tutkinnonuudistuksen myötä osasto haluaa varmistaa sähkötekniikan tutkintojen laadun ja vertailtavuuden sekä parantaa opiskelijoidensekä henkilökunnan liikkuvuutta. Tutkintojen laatu ja vertailtavuus osoitetaan sähkötekniikan osaston benchmark-projektilla, jossa kerätään tietoja maisteri- ja tohtorintutkintoa tarjoavista eurooppalaisista yliopistoista. Diplomityö käsittää BM-projektin kolmannen vaiheen suunnittelun ja toteutuksen sisältäen teoriaa benchmark-projekteille tyypillisistä toimintatavoista. Hyväksi havaitut menetelmiä, kuten kyselyt ja matriisit, on tässä työssä otettu soveltuvin osin sähkötekniikan osaston BM-projektin työkaluiksi. Diplomityössä analysoidaan työkalujen avulla BM-kumppaneilta kerättyjä tietoja sekä esitetään ratkaisuja, miten sähkötekniikan osastolla voidaan jatkaa parhaiden toimintatapojen löytämistä.

Developing Support for Scenario Process: A Scenario Study on Lappeenranta University of Technology from 2006 to 2016

Epävarmuus ei ole outoa enää julkishallinon alueellakaan. Globalisaation,tietotalous ja muut yksityissektoria ravistelleet ilmiöt ovat lisänneet mielenkiintoa erilaisiin tekniikoihin joilla voidaan lievittää epävarmuudesta aiheutuvia ongelmia. Tämä raportti kuvailee skenaariosuunnittelun käyttöä eräänä mahdollisuutena epävarmuuden hallintaan julkishallinnossa ja yksityissektorilla. Raportti sijoittuu samaan skenaariotutkimuksen jatkumoon edellisten LTY:ssä toteutettujen skenaariotutkimusten kanssa. tutkimus valottaa tutkimuksen ja käytännön työn nykytilaa helposti hyödynnettävässä muodossa. Rapostin kontribuutio on kuvata tutkimukseen perustuva tuettu skenaarioprosessi ja syntyneet skenaariot, keskittyen prosessin tukemiseen eri menetelmin.

Aspects on Process Engineering in the Finnish Pulp and Paper Industry : Thesis for the Degree of Licentiate in Science of Technology

Process development will be largely driven by the main equipment suppliers. The reason for this development is their ambition to supply complete plants or process systems instead of single pieces of equipment. The pulp and paper companies' interest lies in product development, as their main goal is to create winning brands and effective brand management. Design engineering companies will find their niche in detail engineering based on approved process solutions. Their development work will focus on increasing the efficiency of engineering work. Process design is a content-producing profession, which requires certain special characteristics: creativity, carefulness, the ability to work as a member of a design team according to time schedules and fluency in oral as well as written presentation. In the future, process engineers will increasingly need knowledge of chemistry as well as information and automation technology. Process engineering tools are developing rapidly. At the moment, these tools are good enough for static sizing and balancing, but dynamic simulation tools are not yet good enough for the complicated chemical reactions of pulp and paper chemistry. Dynamic simulation and virtual mill models are used as tools for training the operators. Computational fluid dynamics will certainlygain ground in process design.

Factors Related to Study Success at Lappeenranta University of Technology

Tutkimuksen avulla selvitettiin opintomenestykseen liittyviä tekijöitä Lappeenrannan teknillisessä korkeakoulussa (LTKK). Tutkimus liittyi opetuksen ja oppimisen kehitystyöhön tuotantotalouden osastolla. Tutkimuksen viitekehyksen muodosti oppimistuloksia selittävä malli, joka on laadittu Tynjälän (1999) kokoaman mallin perusteella. Tutkimuksen perusjoukko muodostui LTKK:n läsnä olevista perusopiskelijoista lukuun ottamatta jatko- ja vaihto-opiskelijoita. Opiskelijat jaettiin ositetulla otannalla ryhmiin, joissa suoritettiin yksinkertainen satunnaisotanta. Otoskoko oli 645 opiskelijaa. Tiedonkeruumenetelmänä oli Internet-kysely. Aineisto analysoitiin useiden kvantitatiivisten ja kvalitatiivisten menetelmien avulla. Tutkimuksen tuloksia voidaan pitää luotettavina ja tutkimuksen avulla saatiin tärkeää ja hyödyllistä tietoa opintomenestyksestä ja oppimisprosesseista. Tulosten perusteella merkittävimmät oppimistuloksiin positiivisesti liittyvät tekijät ovat syväsuuntautunut opiskelustrategia ja luottaminen omiin kykyihin, ja negatiiviset tekijät ovat oppimisen itsesäätelyn puute, omien kykyjen epäily ja pintasuuntautunut opiskelustrategia. Merkitysorientoituneet, itsesäätelykykyiset opiskelijat menestyivät LTKK:ssa parhaiten.