Estimation of Series Capacitance for a Three-Phase Transformer Winding From Its Measured Frequency Response

Recently, authors published a method to indirectly measure series capacitance (C-s) of a single, isolated, uniformly wound transformer winding, from its measured frequency response. The next step was to implement it on an actual three-phase transformer. This task is not as straightforward as it might appear at first glance, since the measured frequency response on a three-phase transformer is influenced by nontested windings and their terminal connections, core, tank, etc. To extract the correct value of C-s from this composite frequency response, the formulation has to be reworked to first identify all significant influences and then include their effects. Initially, the modified method and experimental results on a three-phase transformer (4 MVA, 33 kV/433 V) are presented along with results on the winding considered in isolation (for cross validation). Later, the method is directly implemented on another three-phase unit (3.5 MVA, 13.8 kV/765 V) to show repeatability.

Non-Destructive Evaluation of Defects and Damage in Composite Materials and Structures

The mechanical behaviour of composite materials differs from that of conventional structural materials owing to their heterogeneous and anisotropic nature. Different types of defects and anomalies get induced in these materials during the fabrication process. Further, during their service life, the components made of composite materials develop different types of damage. The performance and life of such components is governed by the combined effect of all these defects and damage. While porosity, voids, inclusions etc., are some defects those can get induced during the fabrication of composites, matrix cracks, interface debonds, delaminations and fiber breakage are major types of service induced damage which are of concern. During the service life of components made of composites, one type of damage can grow and initiate another type of damage. For example, matrix cracks can gradually grow to the interface and initiate debonds. Interface debonds in a particular plane can lead to delaminations. Consequently, the combined effect of different types of distributed damage causes the failure of the component. A set of non-destructive evaluation (NDE) methods is well established for testing conventional metallic materials. Some of them can also be utilized for composite materials as they are, and in some cases with a little different approach or modification. Ultrasonics, Radiography, Thermography, Fiber Optics, Acoustic Emision Techniques etc., to name a few. Detection, evaluation and characterization of different types of defects and damage encountered in composite materials and structures using different NDE tools is discussed briefly in this paper.

Direct Characterizing of Densification Mechanisms during Spark Plasma Sintering

Spark plasma sintering (SPS) is a convenient and rapid means of producing dense ceramic compacts. However, the mechanisms responsible for rapid densification have not been identified satisfactorily, with different studies using an indirect approach yielding varied values for the densification parameters. This study involved SPS in high purity nanocrystalline alumina with temperatures ranging from 1173 to 1423K and stresses from 25 to 100MPa. A direct approach, with analyses at a constant density, revealed a stress exponent of similar to 1 and an inverse grain size dependence of similar to 3, consistent with Coble creep process. Whereas the direct approach gives a stress exponent of similar to 1, the indirect approach used previously gives stress exponents ranging from similar to 2.2 to 3.5 with the same data, thereby revealing potentially spurious values of the densification parameters from conventional indirect approaches to characterizing densification. The rapid densification during SPS is related to the finer grain sizes retained with the rapid heating rates and the imposed stress that enhances the driving force for densification.

Measuring the linewidth of a stabilized diode laser

We demonstrate a straightforward technique to measure the linewidth of a grating-stabilized diode laser system - known as an external cavity diode laser (ECDL) - by beating the output of two independent ECDLs in a Michelson interferometer, and then taking the Fourier transform of the beat signal. The measured linewidth is the sum of the linewidths of the two laser systems. Assuming that the two are equal, we find that the linewidth of each ECDL measured over a time period of 2. s is about 0.3 MHz. This narrow linewidth shows the advantage of using such systems for high-resolution spectroscopy and other experiments in atomic physics.

Performance analysis of 1200 kV ceramic disc insulator string under normal and faulted conditions

In the recent years there has been a considerable increase in demand for the electrical power requirement in our country. Presently the transmission system voltages has increased to 765 kV ac and 800kV dc, keeping in view of the future demand experimentation and simulation studies for 1200 kV ac and 1100kV dc transmission are under progress. In the present study an attempt is made to compute the surface potential, electric field across the string of ceramic disc insulators used for 1200kV ac systems. The studies are carried out under normal, polluted conditions and for the case of insulator string containing faulty discs. A computer code using surface charge simulation method (SCSM) is developed for the present analysis. Also a new technique which enhances the surface potential and electric field strength for the existing ceramic disc insulators is presented.

GRMHD formulation of highly super-Chandrasekhar rotating magnetized white dwarfs: stable configurations of non-spherical white dwarfs

Here we extend the exploration of significantly super-Chandrasekhar magnetized white dwarfs by numerically computing axisymmetric stationary equilibria of differentially rotating magnetized polytropic compact stars in general relativity (GR), within the ideal magnetohydrodynamic regime. We use a general relativistic magnetohydrodynamic (GRMHD) framework that describes rotating and magnetized axisymmetric white dwarfs, choosing appropriate rotation laws and magnetic field profiles (toroidal and poloidal). The numerical procedure for finding solutions in this framework uses the 3 + 1 formalism of numerical relativity, implemented in the open source XNS code. We construct equilibrium sequences by varying different physical quantities in turn, and highlight the plausible existence of super-Chandrasekhar white dwarfs, with masses in the range of 2-3 solar mass, with central (deep interior) magnetic fields of the order of 10(14) G and differential rotation with surface time periods of about 1-10 s. We note that such white dwarfs are candidates for the progenitors of peculiar, overluminous Type Ia supernovae, to which observational evidence ascribes mass in the range 2.1-2.8 solar mass. We also present some interesting results related to the structure of such white dwarfs, especially the existence of polar hollows in special cases.

Stalagmite growth perturbations from the Kumaun Himalaya as potential earthquake recorders

The central part of the Himalaya (Kumaun and Garhwal Provinces of India) is noted for its prolonged seismic quiescence, and therefore, developing a longer-term time series of past earthquakes to understand their recurrence pattern in this segment assumes importance. In addition to direct observations of offsets in stratigraphic exposures or other proxies like paleoliquefaction, deformation preserved within stalagmites (speleothems) in karst system can be analyzed to obtain continuous millennial scale time series of earthquakes. The Central Indian Himalaya hosts natural caves between major active thrusts forming potential storehouses for paleoseismological records. Here, we present results from the limestone caves in the Kumaun Himalaya and discuss the implications of growth perturbations identified in the stalagmites as possible earthquake recorders. This article focuses on three stalagmites from the Dharamjali Cave located in the eastern Kumaun Himalaya, although two other caves, one of them located in the foothills, were also examined for their suitability. The growth anomalies in stalagmites include abrupt tilting or rotation of growth axes, growth termination, and breakage followed by regrowth. The U-Th age data from three specimens allow us to constrain the intervals of growth anomalies, and these were dated at 4273 +/- 410 years BP (2673-1853 BC), 2782 +/- 79 years BP (851-693 BC), 2498 +/- 117 years BP (605-371 BC), 1503 +/- 245 years BP (262-752 AD), 1346 +/- 101 years BP (563-765 AD), and 687 +/- 147 years BP (1176-1470 AD). The dates may correspond to the timings of major/great earthquakes in the region and the youngest event (1176-1470 AD) shows chronological correspondence with either one of the great medieval earthquakes (1050-1250 and 1259-1433 AD) evident from trench excavations across the Himalayan Frontal Thrust.

热轧钢板的织构

综述了热轧钢板织构的形成机制和形成特点,分析了化学成分、加热温度、终轧温度、轧制速度、轧后冷却速度以及润滑对热轧织构的影响规律,并描述了热轧织构对热轧钢板塑性应变比、屈服强度和韧性的影响特点,可为热轧钢板织构和性能的优化与控制提供依据。

Dinámica poblacional de arvenses en el cultivo del pipian (Cucurbita pepo L.) producido bajo un sistema de manejo orgánico y un sistema de manejo convencional, en Tipitapa, Masaya 2007

Actualmente, el manejo de arvenses en las Cucurbitaceae es a base de herbicidas, repercutiendo en serios problemas al ambiente y al hombr e. En la finca experimental El Plantel, ubicado en el km 43 ½ carretera Tipitapa – Masaya, se estableció un estudio con el objetivo de conocer la dinámica poblacional de arvenses y su incidencia en el cultivo de pipián Cucurbita pepo L; producido bajo dos sistemas de manejo. Se evaluó un sistema convencional con el uso de Completo (12 - 30 - 10) 522.98 Kg/Ha, Urea 190.06 Kg/Ha, y un sistema orgánico con el uso Humus 10,886.95Kg/Ha, Compost: 21,900.62Kg/Ha, Biofertilizante: 14,765.21 Kg/Ha En una área 525m2, en tres parcelas de 80.5 m2, alternando con el pipián, el caupí. ( Vigna unguiculata . (L) Walp). En la diversidad se encontraron 13 especies en el sistema orgánico, predominando Tithonia rotundifolia (Mill) Blake, Boerhavia erecta L., Sorghum halepense (L) P e rs. Y 10 familias, entre ellas, Portulacaceae, Asteraceae, Nyctaginaceae, y Cyperaceae. Y en el sistema convencional 11 especies, predominando, Ixophorus unicetus (Presl), Sorghum halepense (L) P ers, Tithonia rotundifolia (Mill) Blake, y 9 familias, sobres alieron Poaceae, Portulacaceae, Asteraceae, y Nyctaginaceae. El porcentaje de cobertura en los dos sistemas de manejo se presento similar. La biomasa por familia, especie y cultivo, fue mayor en el sistema orgánico. El rendimiento del cultivo no reflejo di ferencia significativa entre los dos sistemas de manejo evaluados. Los resultados demostraron que presencia de arvenses no afectó el desarrollo y crecimiento del cultivo. El manejo orgánico puede verse como una alternativa viable para el productor y para l a conservación del ambiente, a pesar de ser este un corto ciclo, este manejo muestra que a futuro se pueden obtenerse mejores resultados

自适应光学系统的数值模拟: 直接斜率控制法

采用直接斜率控制法完整地实现了对自适应光学（ＡＯ）系统的数值模拟，系统研究了带自适应光学校正的激光大气传输规律。提出了对计算出的位相进行“剪接”的办法，解决了残余位相方差与自适应光学的校正效果没有对应关系的问题。证明可以把快速傅里叶变换法（ＦＦＴ）用于透镜成像的聚焦计算，与积分法得到相同的结果。报道了对于一定的延迟时间，当大气横向风速大于一个阈值时，自适应光学补偿比完全相位补偿的效果还要好，表明在一定的条件下自适应光学系统的校正能力并非越大越好

Influence of inertial and thermal effects on the dynamic growth of voids in porous ductile materials

The influence of inertial, thermal and rate - sensitive effects on the void growth at high strain rate in a thermal - viscoplastic solid is investigated by means of a theoretical model presented in the present paper. Numerical analysis of the model suggests that inertial, thermal and rate - sensitive effects are three major factors which greatly influence the behavior of void growth in the high strain rate case. Comparison of the mathematical model proposed in the present work and Johnson's model shows that if the temperature - dependence is considered, material viscosity eta can take the experimentally measured values.

Results of a fish health survey of North Biscayne Bay, June 1976-June 1977

Fish were collected weekly in Biscayne Bay using a monofilament gill net set from a small skiff during 20-30 minute intervals. Although weekly sampling took place for 2.5 years, only the data from samples collected from June 1976 to June 1977 were used in this document. Abnormal external conditions of fins and body were observed on each fish and recorded. Fish were returned immediately to their habitats. Fish collected in the time period for this study numbered 3,765 and included 32 species. Of these, 16 species, totaling 3,556 fish, were caught in sufficient numbers (20 or more) to warrant data analysis. Only 3 of the 16 species could be considered relatively unafflicted: Aetobatus narinari (spotted eagle ray), Diodon hystrix (porcupinefish), and Selene vomer (lookdown). More than 80% of the examined specimens of these three species were unaffected. Less than 20% of the specimens of Diapterus plumieri (striped mojarra), Micropogonias undulatus (Atlantic croaker), and Pogonias cromis (black drum) displayed normal conditions. The three most afflicted species were Diapterus plumieri, striped mojarra; Micropogonias undulatus, Atlantic croaker; and Pogonias cromis, black drum. Only 7, 3, and 7% respectively showed no external evidence of disease. Data described in this document were originally tabulated in the mid-1970s, remained unpublished, and are no longer available. This document was based on archived unpublished text, a data summary table, and figures. Most of the text and cited references were the ones used in the original manuscript and no attempt was made to update them. (PDF contains 44 pages)