Antioxidative principals of Jussiaea repens: an edible medicinal plant

Jussiaea repens L. (JRL) is an edible medicinal plant and is also used as a vegetable by the local people in southwestern China. The crude extract and its four fractions derived from JRL were evaluated for the 1,1-diphenyl-2-picrylhydrazyl radical-scavenging ability, hydroxyl radical-scavenging capacity and the potassium ferricyanide reduction property. The ethyl acetate-soluble fraction (EAF) and EAF6 (a subfraction derived from EAF) were the most valuable fraction and subfraction, respectively. Furthermore, bioactivity-guided chromatographic fractionation revealed that three pure compounds greatly contributed to the antioxidant activities. Qualitative and quantitative analyses of the major antioxidant constituents in the extract were systematically conducted by NMR, mass spectral analyses and RP-HPLC. The result demonstrated that rosmarinic acid (2.00 mg g(-1) JRL dry weight) quercetin 3-O-beta-D-glucopyranoside (9.88 mg g(-1) JRL dry weight), and kaempferol 3-O-beta-D-glucopyranoside (1.85 mg g(-1) JRL dry weight) were the major antioxidative constituents in JRL. These compounds are reported for the first time from this plant.

There are two 5 '-flanking regions of bkt encoding beta-carotene ketolase in Haematococcus pluvialis

The unicellular green alga Haematococcus pluvialis accumulates a commercially valuable astaxanthin, with levels reaching up to 4% dry weight under environmental stress. In recent years, much effort has been devoted to understanding the molecular mechanisms regulating astaxanthin biosynthetic pathways. Beta-carotene ketolase (bkt), with control being exhibited at the transcription level, plays an important role in astaxanthin biosynthesis by H. pluvialis. Here we demonstrate the presence of two separate 5'-flanking regions [1.5 kilobase (kb) and 2 kb] of bkt (bkt1 and bkt2) that possess regulatory elements similar to those of known stress-responsive genes in plants. Results of 5'-deletion constructs and transient beta-galactosidase expression assays demonstrate that there may be positive regulatory elements governing expression in the shorter promoter at -1060/-900 from the 1.5 kb 5' region, and in the longer promoter at -1838/-1219 and at -1046/ -734 from the 2 kb 5' region relative to each homologous ATG start codon. Furthermore, our present studies reveal that the first intron (+371/+497) downstream from the 1.5 kb 5' untranslated region of bkt1 may function as a negative regulatory element to regulate its own promoter.

Dissection of rye B chromosomes, and nondisjunction properties of the dissected segments in a common wheat background

The rye B chromosome is a supernumerary chromosome that increases in number in its host by directed postmeiotic drive. Two types of rye B chromosomes that had been introduced into common wheat were dissected into separate segments by the gametocidal system to produce a number of rearranged B chromosomes, such as telosomes, terminal deletions and translocations with wheat chromosomes. A total of 13 dissected B chromosomes were isolated in common wheat, and were investigated for their nondisjunction. properties. Rearranged B chromosomes, separated from their B-specific repetitive sequences on the distal part of the long arm, did not undergo nondisjunction, and neither did a translocated wheat chromosome carrying a long-arm distal segment containing the B-specific repetitive sequences. However, such rearranged B chromosomes, missing their B-specific sequences could undergo nondisjunction when they coexisted with the standard B chromosome or a wheat chromosome carrying the B-specific sequences. Deficiencies of the short arm did not completely abolish the nondisjunction properties of the B chromosome, but did reduce the frequency of nondisjunction. These results confirmed previous suggestions that the directed nondisjunction of the rye B chromosome is controlled by two elements, pericentromeric sticking sites and a trans-acting element carried at the distal region of the long arm of the B chromosome. Additionally, it is now shown that the distal region of the long arm of the B chromosome which provides this function is that which carries the B-specific repetitive sequences.

Capillary electrophoretic analysis of pharmacologically active xanthone compounds from Swertia przewalskii pissjauk extract

Pharmacologically active xanthone compounds isolated from Swertia przewalskii pissjauk were well separated by capillary electrophoresis (CE) within 5 min, using a running buffer of 25 mM disodium tetraborate at pH 9.0. Quantitative determination was shown to be possible because regression equations revealed a linear relationship between the peak area of each constituent and its concentration, with correlation coefficients of 0.9972-0.9994. The relative standard deviations were between 0.44%-0.73% for migration times and 2.52%-4.28% for peak areas. The dissociation constant of 1,7-O-beta-D-glucopyranosyl-8-hydroxy-3,7-dimethoxyxanthone, 1,8-dihydroxy-3, 7-dimethoxy-xanthone and 1,7-dihydroxy-3,8-dimethoxyxanthone were also measured by the CE method, giving a value of 9.04, 8.94, and 8.59, respectively.

Risorse intangibili e imprese familiari: principali contributi sul tema e nuove prospettive di ricerca

Intangible resources are the distinctive factors for the success of businesses (Barney, 1991) and for this reason the literature has paid particular attention to this issue (Barney, 1991; Hall, 1992,1993; Carmeli, 2004; Galbreath, 2005; Hayton, 2005; Norman, Butler, Ranft, 2013). With this thesis I will analyze existing studies on the subject with particular reference to family businesses - ideal forum for the spread of specific intangibles (Ward, 1988; Habbershon, Williams, 1999; Sirmon & Hitt, 2003; Huybrechts et al., 2011; Rose, Howorth & Discua Cruz, 2014), in order to identify the main areas of research and new research perspectives. Through a narrative review on the general theme of intangible resources, bibliometric analysis of the contributions that jointly address the intangibles and family businesses and co-citation analysis for the definition of the intellectual structure of the studies on the intangible resources in family firms is reached an in-depth study of the issue with relevant academic and practical implications.

Sy abl fodd Sibli fain: Sibyl in Medieval Wales

Haycock, Marged, 'Sy abl fodd Sibli fain: Sibyl in Medieval Wales', In: Heroic Poets and Poetic Heroes in Celtic Tradition, Joseph Falaky Nagy and Leslie Ellen Jones (eds), (Dublin: Four Courts Press), pp.115-130, 2005 RAE2008

OpenBU: Institutional Repository Procedures Manual

(adapted from the DSpace Procedures Manual developed by Kalamazoo College Digital Archive)

Comparison of encapsulant curing with convention and microwave systems

Comparison of the performance of a conventional convection oven system with a dual-section microwave system for curing thermosetting polymer encapsulant materials has been performed numerically. A numerical model capable of analysing both the convection and microwave cure processes has been developed and is breifly outliines. The model is used to analyse the curing of a commercially available encapsulant material using both systems. Results obtained from numerical solutions are presented, confirming that the VFM system enables the cure process to be carried out far more rapidly than with the convection oven system. This capability stems from the fundamental heating processes involved, namely that microwave processing enables the heating rate to be varied independently of the material temperature. Variations in cure times, curing rates, maximum temperatures and residual stresses between the processes are fully discussed.

Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications

The market for solder paste materials in the electronic manufacturing and assembly sector is very large and consists of material and equipment suppliers and end users. These materials are used to bond electronic components (such as flip-chip, CSP and BGA) to printed circuit boards (PCB's) across a range of dimensions where the solder interconnects can be in the order of 0.05mm to 5mm in size. The non-Newtonian flow properties exhibited by solder pastes during its manufacture and printing/deposition phases have been of practical concern to surface mount engineers and researchers for many years. The printing of paste materials through very small-sized stencil apertures is known to lead to increased stencil clogging and incomplete transfer of paste to the substrate pads. At these very narrow aperture sizes the paste rheology and particle-wall interactions become crucial for consistent paste withdrawal. These non-Newtonian effects must be understood so that the new paste formulations can be optimised for consistent printing. The focus of the study reported in this paper is the characterisation of the rheological properties of solder pastes and flux mediums, and the evaluation of the effect of these properties on the pastes' printing performance at the flip-chip assembly application level. Solder pastes are known to exhibit a thixotropic behaviour, which is recognised by the decrease in apparent viscosity of paste material with time when subjected to a constant shear rate. The proper characterisation of this time-dependent theological behaviour of solder pastes is crucial for establishing the relationships between the pastes' structure and flow behaviour; and for correlating the physical parameters with paste printing performance. In this paper, we present a number of methods which have been developed for characterising the time-dependent and non-Newtonian rheological behaviour of solder pastes and flux mediums as a function of shear rates. We also present results of the study of the rheology of the solder pastes and flux mediums using the structural kinetic modelling approach, which postulates that the network structure of solder pastes breaks down irreversibly under shear, leading to time and shear dependent changes in the flow properties. Our results show that for the solder pastes used in the study, the rate and extent of thixotropy was generally found to increase with increasing shear rate. The technique demonstrated in this study has wide utility for R&D personnel involved in new paste formulation, for implementing quality control procedures used in solder paste manufacture and packaging; and for qualifying new flip-chip assembly lines

Cuestiones de escala en el ámbito de la “Huella Hídrica”.

La aplicación de la “Huella Hídrica” a la realidad española debe hacerse desde la consciencia de que hasta hace relativamente poco, el pensamiento científico dominante era el reduccionismo, cuyo enfoque considera que basta un conocimiento detallado de cada uno de los componentes de un sistema y de sus leyes fundamentales, para entenderlo globalmente. Y es que, el interés por este indicador surge de la importancia que cobran conceptos como “escasez” y “contaminación” del agua, como consecuencia directa e indirecta de la actividad humana sobre los sistemas hídricos, tanto en España como en los países de América Latina; con el fin de mejorar la gestión –desde la oferta y la demanda- de los recursos hídricos del planeta y reducir las desigualdades territoriales. De este modo, en el presente estudio se realiza una estimación de la “Huella Hídrica” de España y América Latina, así como de a la Red de Parques Nacionales Españoles, tanto a nivel económico como ambiental, describiendo los recursos hídricos utilizados, necesarios para satisfacer la demanda de bienes y servicios consumidos, en los prolegómenos del siglo XXI.

WASP-1b and WASP-2b: Two new transiting exoplanets detected with SuperWASP and SOPHIE

We have detected low-amplitude radial-velocity variations in two stars, USNO-B1.0 1219-0005465 (GSC 02265-00107 = WASP-1) and USNO-B1.0 0964-0543604 (GSC 00522-01199 = WASP-2). Both stars were identified as being likely host stars of transiting exoplanets in the 2004 SuperWASP wide-field transit survey. Using the newly commissioned radial-velocity spectrograph SOPHIE at the Observatoire de Haute-Provence, we found that both objects exhibit reflex orbital radial-velocity variations with amplitudes characteristic of planetary-mass companions and in-phase with the photometric orbits. Line-bisector studies rule out faint blended binaries as the cause of either the radial-velocity variations or the transits. We perform preliminary spectral analyses of the host stars, which together with their radial-velocity variations and fits to the transit light curves yield estimates of the planetary masses and radii. WASP-1b and WASP-2b have orbital periods of 2.52 and 2.15 d, respectively. Given mass estimates for their F7V and K1V primaries, we derive planet masses 0.80-0.98 and 0.81-0.95 times that of Jupiter, respectively. WASP-1b appears to have an inflated radius of at least 1.33 RJup, whereas WASP-2b has a radius in the range 0.65-1.26 RJup.