Measurement of the νμ charged current quasielastic cross section on carbon with the T2K on-axis neutrino beam

We report a measurement of the νµ charged current quasi-elastic cross-sections on carbon in the T2K on-axis neutrino beam. The measured charged current quasi-elastic cross-sections on carbon at mean neutrino energies of 1.94 GeV and 0.93 GeV are (11.95 ± 0.19(stat.) +1.82−1.47(syst.)) ×10^−39 cm^2/neutron, and (10.64 ± 0.37(stat.)+2.03−1.65(syst.)) × 10^−39 cm^2/neutron, respectively. These results agree well with the predictions of neutrino interaction models. In addition, we investigated the effects of the nuclear model and the multi-nucleon interaction.

County of Cornwall, Jamaica, 1763 (Image 1 of 4) (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: This map of the county of Cornwall, in the island of Jamaica; laid down from the papers, under the direction of, Henry Moore, Esqr., His Majesty's Lieutenant Governor, and Commander in Chief of that island, in the years 1756, 57, 58, 59, 60 & 61, & from a great number of actual surveys performed by the publishers is humbly inscribed by his lordship's most obedient & humble servants, Thos. Craskell, engineer, Jas. Simpson, surveyor. It was published by D. Fournier in 1763. Scale [ca. 1:95,000]. This layer is image 1 of 4 total images of the four sheet source map, representing the southwest portion of the map. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Jamaica Grid projected coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as towns, villages, and other human settlements, roads, parish boundaries, drainage, selected buildings and names of landowners, ground cover, shoreline features, shoals, channels, anchorage points, and more.This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

County of Middlesex, Jamaica, 1763 (Image 1 of 4) (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: This map of the county of Middlesex in the island of Jamaica; laid down from the papers, and under the direction of Henry Moore, Esqr., His Majesty's Lieutenant Governor and Commander in Chief of that island, in the years 1756, 57, 58, 60, & 61 and from a great number of actual surveys performed by the publishers is humbly inscribed by his lordship's most obedient & most humble servants, Thos. Craskell, engineer, Jas. Simpson, surveyor. It was published by D. Fournier in 1763. Scale [ca. 1:95,000]. The layer is image 1 of 4 total images of the four sheet map, representing the southeast portion of the map.The image inside the map neatline is georeferenced to the surface of the earth and fit to the Jamaica Grid projected coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as towns, villages, and other human settlements, roads, parish boundaries, drainage, selected buildings and names of landowners, ground cover, shoreline features, shoals, channels, anchorage points, and more.This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

Numerical modelling of thermal effects in rats due to high-field magnetic resonance imaging (0.5-1 GHz)

A finite-difference time-domain (FDTD) thermal model has been developed to compute the temperature elevation in the Sprague Dawley rat due to electromagnetic energy deposition in high-field magnetic resonance imaging (MRI). The field strengths examined ranged from 11.75-23.5 T (corresponding to H-1 resonances of 0.5-1 GHz) and an N-stub birdcage resonator was used to both transmit radio-frequency energy and receive the MRI signals. With an in-plane resolution of 1.95 mm, the inhomogeneous rat phantom forms a segmented model of 12 different tissue types, each having its electrical and thermal parameters assigned. The steady-state temperature distribution was calculated using a Pennes 'bioheat' approach. The numerical algorithm used to calculate the induced temperature distribution has been successfully validated against analytical solutions in the form of simplified spherical models with electrical and thermal properties of rat muscle. As well as assisting with the design of MRI experiments and apparatus, the numerical procedures developed in this study could help in future research and design of tumour-treating hyperthermia applicators to be used on rats in vivo.

(Table 1) Comparison of diatom-bound and bulk sedimentary d15N values of ODP Holes 175-1082A and 175-1084A

The Matuyama Diatom Maximum (MDM) is a time of peak opal accumulation from 2.6 to ~2.0 Ma within the Benguela Current upwelling system that was initiated by increased influence of Southern Ocean water on the eastern South Atlantic. We measured opal, total organic carbon (TOC), and CaCO3 fluxes and C and N stable isotopes in sediments deposited from 2.4 to 1.95 Ma at Sites 1082 and 1084 to explore the biogeochemical dynamics within the Benguela region. The infusion of Southern Ocean water delivered dissolved nutrients and Southern Ocean flora and fauna, resulting in local opal accumulation increasing up to 8 g/cm**2/ky and the production of diatom mats. Some d15N measurements of diatom-bound organic matter indicate that the mats grew within the Benguela region. The bulk sediment d15N records are taken to reflect changes in the d15N of nitrate in the incoming water, where lower values at 2.4 Ma reflect less nitrate utilization in the Antarctic. A long-term increase in relative nitrate uptake in the Southern Ocean is evidenced by the gradual increase in d15N toward 1.9 Ma.

Stoichiometry dependence of the evolution of the irradiated-induced defect clusters in lanthanum-doped ceria

To study the stoichiometry dependence of irradiation e ects in fluorite-type mixed oxide nuclear fuel (UPuO2), ion implantation in La doped ceria was used. Cerium dioxide single crystals with 0 mol%, 5 mol% and 25 mol% La concentration were irradiated with 1 MeV Kr ions at 800 C. In-situ transmission electron microscope (TEM) was utilized to observe the the damage process and defects created by the ion beam irradiation. Dislocation loops were observed after irradiation and were determined to be on {111} planes, but not on {220} or {200} planes. Ab substantial difference in the average size of dislocation loops for 0 %, 5% and 25% cases was observed at several doses.The growth rate of dislocation loops and the oxygen vacancy di usivity were found to be inversely correlated.

Validación de criterio concurrente del sistema de observación de tiempo de instrucción de condición física – SOFIT- para la medición de la actividad física durante las clases de educación física en escolares de 1º A 9º de Bogotá, Colombia

Determinar la validez concurrente del Sistema de Observación de Tiempo de Instrucción de Condición Física (SOFIT) a través de acelerometría, como método para medir los niveles de actividad física (AF) de los escolares de 1º a 9º durante la clase de educación física en tres colegios públicos de Bogotá, Colombia. Estudio transversal entre Octubre de 2014 y Marzo de 2015. La medición se realizó en tres colegios públicos de Bogotá. Participaron 48 estudiantes (25 niñas; 23 niños), entre 5 y 17 años, seleccionados de acuerdo al protocolo de SOFIT. El resultado se categoriza en porcentaje de tiempo en comportamiento sedentario, AF moderada, AF vigorosa, y AF moderada a vigorosa. Se validó utilizando como patrón de oro la acelerometría en las mismas categorías. Se realizó diferencia de medias, regresión lineal y modelo de efectos fijos. La correlación entre SOFIT y acelerometría fue buena para AF moderada (rho=,958; p=0,000), AF vigorosa (rho=,937; p=0,000) y AF de moderada a vigorosa (rho=0,962; p=0,000). Al igual que utilizando un modelo de efectos fijos, AF moderada (β1=0,92; p=0,00), vigorosa (β1=0,94; p=0,00) y AF de moderada a vigorosa (β1=0,95; p=0,00), mostrando ausencia de diferencias significativas entre los dos métodos para la medición de los niveles de AF. El comportamiento sedentario correlacionó positivamente en Spearman (rho=,0965; p=0,000), El sistema SOFIT demostró ser válido para medir niveles de AF en clases de educación física, tras buena correlación y concordancia con acelerometría. SOFIT es un instrumento de fácil acceso y de bajo costo para la medición de la AF durante las clases de educación física en el contexto escolar y se recomienda su uso en futuros estudios.

Factores de riesgo asociados al desarrollo de bacteriemia en pacientes adultos cirróticos hospitalizados

Introducción: La Bacteriemia en pacientes cirróticos es una causa importante de morbimortalidad, en gran parte favorecida por la especial vulnerabilidad de esta población ante procesos infecciosos. El objetivo fue determinar los factores asociados al desarrollo de bacteriemia primaria y secundaria en pacientes con Cirrosis, hospitalizados en la Fundación Cardioinfantil – Instituto de Cardiología entre 01 enero de 2010 y 31 enero de 2016. Materiales y Métodos: Estudio de casos y controles en pacientes mayores de 18 años con cirrosis hepática conocida o confirmada durante la hospitalización. Se realizó un análisis descriptivo, un análisis bivariado para determinar las diferencias entre los casos y los controles con respecto a las variables independientes un análisis de asociación mediante un modelo de regresión logística no condicional con variable dependiente bacteriemia. Los resultados se expresan en odds ratios con intervalos de confianza al 95%. Resultados: Las condiciones asociadas a bacteriemia como factores de riesgo fueron: Enfermedad renal crónica OR 9,1 (IC 95% 2,4-34), Escala Meld > 10 puntos OR 4,0 (IC 95% 2,-34), Infección previa OR 7,2 (IC 95% 2,1-24), presencia de catéter central OR 12,0 (IC 95% 1,8-80), presencia de sonda vesical OR 21,1 (IC 95% 1,6-276), estudio endoscópico OR 3,9 (IC 95% 1,1-14). Discusión: Factores relacionados con las condiciones clínicas del paciente evaluadas por las escalas Meld y Child-Pugh, el antecedente de infección previa y la presencia de dispositivos para monitorear el estado del paciente aumentan el riesgo de bacteriemia en pacientes hospitalizados con cirrosis.

Estudio molecular en dos hermanas afectadas por ictiosis congénita autosómica recesiva : descripción de una nueva mutación causal en TGM1

Se describe la variante homocigota c.320-2A>G de TGM1 en dos hermanas con ictiosis congénita autosómica recesiva. El clonaje de los transcritos generados por esta variante permitió identificar tres mecanismos moleculares de splicing alternativos.

Behaviour and design of cold-formed steel compression members at elevated temperatures

Cold-formed steel members have been widely used in residential, industrial and commercial buildings as primary load bearing structural elements and non-load bearing structural elements (partitions) due to their advantages such as higher strength to weight ratio over the other structural materials such as hot-rolled steel, timber and concrete. Cold-formed steel members are often made from thin steel sheets and hence they are more susceptible to various buckling modes. Generally short columns are susceptible to local or distortional buckling while long columns to flexural or flexural-torsional buckling. Fire safety design of building structures is an essential requirement as fire events can cause loss of property and lives. Therefore it is essential to understand the fire performance of light gauge cold-formed steel structures under fire conditions. The buckling behaviour of cold-formed steel compression members under fire conditions is not well investigated yet and hence there is a lack of knowledge on the fire performance of cold-formed steel compression members. Current cold-formed steel design standards do not provide adequate design guidelines for the fire design of cold-formed steel compression members. Therefore a research project based on extensive experimental and numerical studies was undertaken at the Queensland University of Technology to investigate the buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. As the first phase of this research, a detailed review was undertaken on the mechanical properties of light gauge cold-formed steels at elevated temperatures and the most reliable predictive models for mechanical properties and stress-strain models based on detailed experimental investigations were identified. Their accuracy was verified experimentally by carrying out a series of tensile coupon tests at ambient and elevated temperatures. As the second phase of this research, local buckling behaviour was investigated based on the experimental and numerical investigations at ambient and elevated temperatures. First a series of 91 local buckling tests was carried out at ambient and elevated temperatures on lipped and unlipped channels made of G250-0.95, G550-0.95, G250-1.95 and G450-1.90 cold-formed steels. Suitable finite element models were then developed to simulate the experimental conditions. These models were converted to ideal finite element models to undertake detailed parametric study. Finally all the ultimate load capacity results for local buckling were compared with the available design methods based on AS/NZS 4600, BS 5950 Part 5, Eurocode 3 Part 1.2 and the direct strength method (DSM), and suitable recommendations were made for the fire design of cold-formed steel compression members subject to local buckling. As the third phase of this research, flexural-torsional buckling behaviour was investigated experimentally and numerically. Two series of 39 flexural-torsional buckling tests were undertaken at ambient and elevated temperatures. The first series consisted 2800 mm long columns of G550-0.95, G250-1.95 and G450-1.90 cold-formed steel lipped channel columns while the second series contained 1800 mm long lipped channel columns of the same steel thickness and strength grades. All the experimental tests were simulated using a suitable finite element model, and the same model was used in a detailed parametric study following validation. Based on the comparison of results from the experimental and parametric studies with the available design methods, suitable design recommendations were made. This thesis presents a detailed description of the experimental and numerical studies undertaken on the mechanical properties and the local and flexural-torsional bucking behaviour of cold-formed steel compression member at ambient and elevated temperatures. It also describes the currently available ambient temperature design methods and their accuracy when used for fire design with appropriately reduced mechanical properties at elevated temperatures. Available fire design methods are also included and their accuracy in predicting the ultimate load capacity at elevated temperatures was investigated. This research has shown that the current ambient temperature design methods are capable of predicting the local and flexural-torsional buckling capacities of cold-formed steel compression members at elevated temperatures with the use of reduced mechanical properties. However, the elevated temperature design method in Eurocode 3 Part 1.2 is overly conservative and hence unsuitable, particularly in the case of flexural-torsional buckling at elevated temperatures.