Modeling study of limestone reactions in fluidized bed conditions

Traditionally limestone has been used for the flue gas desulfurization in fluidized bed combustion. Recently, several studies have been carried out to examine the use of limestone in applications which enable the removal of carbon dioxide from the combustion gases, such as calcium looping technology and oxy-fuel combustion. In these processes interlinked limestone reactions occur but the reaction mechanisms and kinetics are not yet fully understood. To examine these phenomena, analytical and numerical models have been created. In this work, the limestone reactions were studied with aid of one-dimensional numerical particle model. The model describes a single limestone particle in the process as a function of time, the progress of the reactions and the mass and energy transfer in the particle. The model-based results were compared with experimental laboratory scale BFB results. It was observed that by increasing the temperature from 850 °C to 950 °C the calcination was enhanced but the sulfate conversion was no more improved. A higher sulfur dioxide concentration accelerated the sulfation reaction and based on the modeling, the sulfation is first order with respect to SO2. The reaction order of O2 seems to become zero at high oxygen concentrations.

Computational modeling for irrigated agriculture planning. Part I: general description and linear programming

Linear programming models are effective tools to support initial or periodic planning of agricultural enterprises, requiring, however, technical coefficients that can be determined using computer simulation models. This paper, presented in two parts, deals with the development, application and tests of a methodology and of a computational modeling tool to support planning of irrigated agriculture activities. Part I aimed at the development and application, including sensitivity analysis, of a multiyear linear programming model to optimize the financial return and water use, at farm level for Jaíba irrigation scheme, Minas Gerais State, Brazil, using data on crop irrigation requirement and yield, obtained from previous simulation with MCID model. The linear programming model outputted a crop pattern to which a maximum total net present value of R$ 372,723.00 for the four years period, was obtained. Constraints on monthly water availability, labor, land and production were critical in the optimal solution. In relation to the water use optimization, it was verified that an expressive reductions on the irrigation requirements may be achieved by small reductions on the maximum total net present value.

Computational modeling for irrigated agriculture planning. Part II: risk analysis

Techniques of evaluation of risks coming from inherent uncertainties to the agricultural activity should accompany planning studies. The risk analysis should be carried out by risk simulation using techniques as the Monte Carlo method. This study was carried out to develop a computer program so-called P-RISCO for the application of risky simulations on linear programming models, to apply to a case study, as well to test the results comparatively to the @RISK program. In the risk analysis it was observed that the average of the output variable total net present value, U, was considerably lower than the maximum U value obtained from the linear programming model. It was also verified that the enterprise will be front to expressive risk of shortage of water in the month of April, what doesn't happen for the cropping pattern obtained by the minimization of the irrigation requirement in the months of April in the four years. The scenario analysis indicated that the sale price of the passion fruit crop exercises expressive influence on the financial performance of the enterprise. In the comparative analysis it was verified the equivalence of P-RISCO and @RISK programs in the execution of the risk simulation for the considered scenario.

LVI-suunnittelun ohjaus IPD-projekteissa

Tässä diplomityössä on tutkittu LVI-suunnittelun ohjaamista ja sen kehittämistä integroiduissa rakennushankkeissa. Tutkimuksen tavoitteena on löytää kehitysehdotuksia LVI-suunnittelun eteenpäinviemiseksi integroiduissa hankkeissa. Tutkimus on tehty hyödyntäen kirjallisia lähteitä ja haastattelemalla integroiduissa projekteissa mukana ollutta henkilöstöä. Perinteisessä rakennushankkeessa eri suunnittelualat toimitetaan useasta yrityksestä. Tässä työssä lähtökohtana on, että merkittävimmät suunnittelualat kuten arkkitehti-, rakenne- ja talotekninensuunnittelu tulevat samalta toimittajalta. Toimituslaajuuteen voidaan lisätä myös mm. rakennuttajakonsultointi- ja kiinteistönkehitysprosessi. Tutkimuksen tuloksena saatiin määritettyä kehitysehdotukset integroituihin hankkeisiin yleiseltä ja LVI-suunnittelun kannalta. Kehitystyössä tulee panostaa tietomallintamiseen, aikataulutukseen ja yhteistyöhön. Tietomallintamista voidaan parantaa koulutuksen, Yleisten tietomallivaatimusten 2012 ja tietomallien tarkasteluohjelmistojen avulla. Aikataulutus paranee, kun suunnittelijat saadaan hankkeeseen mukaan riittävän aikaisessa vaiheessa ja kun suunnittelijat pyrkivät aktiivisesti vaikuttamaan hankkeen tarjouksen- ja sopimuksentekoon. Yhteistyötä voidaan parantaa avoimen ilmapiirin korostamisella ja projektiorganisaation tiivistämisellä.

Modeling and simulation of forced-air cooling of strawberries using variable convective coefficient

In the forced-air cooling process of fruits occurs, besides the convective heat transfer, the mass transfer by evaporation. The energy need in the evaporation is taken from fruit that has its temperature lowered. In this study it has been proposed the use of empirical correlations for calculating the convective heat transfer coefficient as a function of surface temperature of the strawberry during the cooling process. The aim of this variation of the convective coefficient is to compensate the effect of evaporation in the heat transfer process. Linear and exponential correlations are tested, both with two adjustable parameters. The simulations are performed using experimental conditions reported in the literature for the cooling of strawberries. The results confirm the suitability of the proposed methodology.

Characterization of soil parameters of two soils of Rio Grande do Sul in modeling the prediction of tractive effort

The interaction between the soil and tillage tool can be examined using different parameters for the soil and the tool. Among the soil parameters are the shear stress, cohesion, internal friction angle of the soil and the pre-compression stress. The tool parameters are mainly the tool geometry and depth of operation. Regarding to the soils of Rio Grande do Sul there are hardly any studies and evaluations of the parameters that have importance in the use of mathematical models to predict tensile loads. The objective was to obtain parameters related to the soils of Rio Grande do Sul, which are used in soil-tool analysis, more specifically on mathematical models that allow the calculation of tractive effort for symmetric and narrow tools. Two of the main soils of Rio Grande do Sul, an Albaqualf and a Paleudult were studied. Equations that relate the cohesion, internal friction angle of the soil, adhesion, soil-tool friction angle and pre-compression stress as a function of water content in the soil were obtained, leading to important information for use of mathematical models for tractive effort calculation.

Mathematical modeling applied to the growth of tilapia in net cages in the sub middle of the São Francisco river

This study aimed to apply mathematical models to the growth of Nile tilapia (Oreochromis niloticus) reared in net cages in the lower São Francisco basin and choose the model(s) that best represents the conditions of rearing for the region. Nonlinear models of Brody, Bertalanffy, Logistic, Gompertz, and Richards were tested. The models were adjusted to the series of weight for age according to the methods of Gauss, Newton, Gradiente and Marquardt. It was used the procedure "NLIN" of the System SAS® (2003) to obtain estimates of the parameters from the available data. The best adjustment of the data were performed by the Bertalanffy, Gompertz and Logistic models which are equivalent to explain the growth of the animals up to 270 days of rearing. From the commercial point of view, it is recommended that commercialization of tilapia from at least 600 g, which is estimated in the Bertalanffy, Gompertz and Logistic models for creating over 183, 181 and 184 days, and up to 1 Kg of mass , it is suggested the suspension of the rearing up to 244, 244 and 243 days, respectively.

Fuzzy modeling of broiler performance, raised from 1 to 21 days, subject to heat stress

ABSTRACT Given the need to obtain systems to better control broiler production environment, we performed an experiment with broilers from 1 to 21 days, which were submitted to different intensities and air temperature durations in conditioned wind tunnels and the results were used for validation of afuzzy model. The model was developed using as input variables: duration of heat stress (days), dry bulb air temperature (°C) and as output variable: feed intake (g) weight gain (g) and feed conversion (g.g-1). The inference method used was Mamdani, 20 rules have been prepared and the defuzzification technique used was the Center of Gravity. A satisfactory efficiency in determining productive responses is evidenced in the results obtained in the model simulation, when compared with the experimental data, where R2 values ​​calculated for feed intake, weight gain and feed conversion were 0.998, 0.981 and 0.980, respectively.

Toimintaohjeiston laatiminen HSY:n jätehuollon elinkaarimallinnuspalveluiden hankkimiseksi

Elinkaariarviointi on menetelmä, missä tuotejärjestelmän aikaiset syötteet ja tuotteet koostetaan yhteen ja tuloksena saadaan sen ympäristökuormitus. Elinkaariarviointi on päätöksentekoa tukeva työkalu. Jätelain kokonaisuudistuksen myötä elinkaariarvioinnin käyttö tullee lisääntymään kuntavastuullisessa jätehuollossa. Helsingin seudun ympäristöpalvelut -kuntayhtymä HSY:n jätehuollon tavoitteena on rakentaa elinkaarimalli, jonka avulla voidaan selvittää koko toiminnan aiheuttama ympäristökuormitus ja taloudelliset vaikutukset. HSY:n jätehuolto on päättänyt toteuttaa elinkaarimallin rakentamisen konsulttityönä. Työn tavoitteena on ollut laatia toimintaohjeisto HSY:n jätehuollon elinkaarimallinnuspalveluiden hankkimiseksi. Elinkaarimalli voidaan tehdä kaupallista ohjelmistoa käyttämällä. Tähän selvitykseen on valittu arvioitavaksi kolme elinkaariarvioinnin työkalua: EASEWASTE, WRATE ja GaBi 4.4. Ohjelmistojen ominaisuuksia on arvioitu kirjallisuuden ja haastattelun perusteella. Työssä on laadittu kriteeristö näiden ohjelmistojen arviointiin. Kirjallisuuden perusteella on selvitetty elinkaariarvioinnin soveltamiskohteet kuntavastuullisessa jätehuollossa. HSY:n jätehuollon elinkaariarvioinnin soveltamiskohteet ja mallinnustarpeet on tunnistettu haastattelemalla HSY:n jätehuollon asiantuntijoita. HSY:n jätehuollolle rakennettavan mallin päivittämistä, käyttöä ja kehittämistä tulisi hallita HSY:n jätehuollon toimesta. Kaikki työssä arvioidut ohjelmistot soveltuvat HSY:n jätehuollon tunnistamien mallinnustarpeiden laskentaan. Elinkaarimallinnuspalveluiden toimintaohjeistolla pyritään varmistamaan HSY:n jätehuollon tarpeisiin soveltuvan mallin hankinta ja jatkotoimenpiteiden suunnittelu.

Building object-oriented software with the D-Bus messaging system

Object-oriented programming is a widely adopted paradigm for desktop software development. This paradigm partitions software into separate entities, objects, which consist of data and related procedures used to modify and inspect it. The paradigm has evolved during the last few decades to emphasize decoupling between object implementations, via means such as explicit interface inheritance and event-based implicit invocation. Inter-process communication (IPC) technologies allow applications to interact with each other. This enables making software distributed across multiple processes, resulting in a modular architecture with benefits in resource sharing, robustness, code reuse and security. The support for object-oriented programming concepts varies between IPC systems. This thesis is focused on the D-Bus system, which has recently gained a lot of users, but is still scantily researched. D-Bus has support for asynchronous remote procedure calls with return values and a content-based publish/subscribe event delivery mechanism. In this thesis, several patterns for method invocation in D-Bus and similar systems are compared. The patterns that simulate synchronous local calls are shown to be dangerous. Later, we present a state-caching proxy construct, which avoids the complexity of properly asynchronous calls for object inspection. The proxy and certain supplementary constructs are presented conceptually as generic object-oriented design patterns. The e ect of these patterns on non-functional qualities of software, such as complexity, performance and power consumption, is reasoned about based on the properties of the D-Bus system. The use of the patterns reduces complexity, but maintains the other qualities at a good level. Finally, we present currently existing means of specifying D-Bus object interfaces for the purposes of code and documentation generation. The interface description language used by the Telepathy modular IM/VoIP framework is found to be an useful extension of the basic D-Bus introspection format.

Virtuaalimallin hyödyntäminen harvesteripään tuotekehityksessä

Virtuaalimallinnuksella tarkoitetaan koneen simulointia, jossa huomioidaan koneen mekaniikka, toimilaitteet ja ohjausjärjestelmä. Työn tavoitteena oli luoda virtuaalimalli harvesteripäästä. Kyseinen virtuaalimalli sisälsi harvesteripään tärkeimmät mekaaniset osat, pituusmittalaitteen hydrauliikkapiirin ja tämän ohjauksen. Luodussa virtuaalimallissa huomioitiin myös harvesteripään ja puun väliset kontaktit. Lisäksi työssä tutkittiin mahdollista virtuaalimallinnuksen implementoimista osaksi yrityksen tuotekehitysprosessia. Työssä suoritettiin verifiointimittaukset pituusmittalaitteen hydrauliikkapiirille sekä virtuaalimallin hydrauliikkakomponentit parametrisoitiin. Mittauksista saatuja tuloksia verrattiin virtuaalimallista saatuihin tuloksiin. Työssä esitellään myös ehdotus kuinka virtuaalimallinnusta kannattaisi hyödyntää osana yrityksen tuotekehitysprosessia. Virtuaalimallin eri osa-alueilla saavutetut tulokset osoittavat, että virtuaalimallinuksen hyödyntäminen tuotekehitysprosessin aikana mahdollistaa harvesteripään toimintojen tarkastelun ennen prototyypin rakentamista ja testaamista. Lisäksi hydrauliikkapiirin parametrisoimisella pystytään tutkimaan parametrien vaikutusta kokonaisuuteen.

Battery Cell Modeling for Battery Management System

Usage of batteries as energy storage is emerging in automotive and mobile working machine applications in future. When battery systems become larger, battery management becomes an essential part of the application concerning fault situations of the battery and safety of the user. A properly designed battery management system extends one charge cycle of battery pack and the whole life time of the battery pack. In this thesis main objectives and principles of BMS are studied and first order Thevenin’s model of the lithium-titanate battery cell is built based on laboratory measurements. The battery cell model is then verified by comparing the battery cell model and the actual battery cell and its suitability for use in BMS is studied.