TREATMENT OF WASTE FROM ATOMIC EMISSION SPECTROMETRIC TECHNIQUES AND REUSE IN UNDERGRADUATE LAB CLASSES FOR QUALITATIVE ANALYSIS

Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma optical emission spectrometry (ICP OES) are widely used in academic institutions and laboratories for quality control to analyze inorganic elements in samples. However, these techniques have been observed to underperform in sample nebulization processes. Most of the samples processed through nebulization system are discarded, producing large volumes of waste. This study reports the treatment and reuse of the waste produced from ICP OES technique in a laboratory of analytical research at the Universidade Federal do Ceará, Brazil. The treatment of the waste was performed by the precipitation of elements using (NH4)2CO3. Subsequently, the supernatant solution can be discarded in accordance with CONAMA 430/2011. The precipitate produced from the treatment of residues can be reused as a potential sample in undergraduate qualitative analytical chemistry lab classes, providing students the opportunity to test a real sample.

Development of Collaborative Product Structure Management

The purpose of this thesis is to develop an environment or network that enables effective collaborative product structure management among stakeholders in each unit, throughout the entire product lifecycle and product data management. This thesis uses framework models as an approach to the problem. Framework model methods for development of collaborative product structure management are proposed in this study, there are three unique models depicted to support collaborative product structure management: organization model, process model and product model. In the organization model, the formation of product data management system (eDSTAT) key user network is specified. In the process model, development is based on the case company’s product development matrix. In the product model framework, product model management, product knowledge management and design knowledge management are defined as development tools and collaboration is based on web-based product structure management. Collaborative management is executed using all these approaches. A case study from an actual project at the case company is presented as an implementation; this is to verify the models’ applicability. A computer assisted design tool and the web-based product structure manager, have been used as tools of this collaboration with the support of the key user. The current PDM system, eDSTAT, is used as a piloting case for key user role. The result of this development is that the role of key user as a collaboration channel is defined and established. The key user is able to provide one on one support for the elevator projects. Also the management activities are improved through the application of process workflow by following criteria for each project milestone. The development shows effectiveness of product structure management in product lifecycle, improved production process by eliminating barriers (e.g. improvement of two-way communication) during design phase and production phase. The key user role is applicable on a global scale in the company.

Determining the location for a mobile device by utilization of local resources of the environment

The subject being analyzed of this Master’s Thesis is a development of a service that is used to define a current location of a mobile device. The service utilized data that is obtained from own GPS receiver in some possible cases and as well data from mobile devices which can be afforded for the current environment for acquisition of more precise position of the device. The computation environment is based on context of a mobile device. The service is implemented as an application for communicator series Nokia N8XX. The Master’s Thesis presents theoretical concept of the method and its practical implementation, architecture of the application, requirements and describes a process of its functionality. Also users’ work with application is presented and recommendations for possible future improvements are made.

Sähköä ja lämpöä tuottavien voimalaitosten kannattavuusanalyysin kehittäminen

Tutkimuksen tavoitteena oli laskea voimalaitoskannattavuudet vuosilta 2007–2009 kohdeyrityksen biovoimalaitokselle sekä kombivoimalaitokselle. Lisäksi laskettiin kohdeyrityksen uuden hyötyvoimalaitoksen käyttöönottovuoden 2009 kannattavuus sekä odotetun käyttöasteen kannattavuus. Tavoitteena oli muodostaa tuotantolaitoskohtaiset tuotekannattavuudet vuodelta 2009 Kotkan Energia Oy:ssä sekä muodostaa kirjatut jakoperusteet kannattavuuksien laskentaa varten ja analysoida saatuja kannattavuuksia. Tutkimusmetodologiana on käytetty soveltavaa tutkimusotetta. Kannattavuusanalyysin kehittäminen vaatii yrityksen kustannusten, tuottojen ja toiminnan sekä toimialan luonteen ymmärtämistä. Haasteena tutkimuksessa oli sähkön, lämmön ja höyryn valmistuksen periaatteiden omaksuminen, joka on kustannusten ja tuottojen oikean kohdistamisen perusta. Tutkimuksen tuloksena todettiin, että kombivoimalaitos on tuotantolaitoksista kannattamattomin. Kohdeyrityksen kannattavuutta voitaisiin parantaa investoimalla kombivoimalaitoksen tilalle halvempaa polttoainetta käyttävä tuotantolaitos. Tuotteista kannattavimmaksi todettiin kaukolämpö. Tutkimuksen tuloksina saatuja kannattavuuksia voidaan hyödyntää Kotkan Energian päätöksenteossa ja niitä hyödyntämällä pystytään kohdeyritykselle laskemaan nopeasti tarpeellisia tulevaisuudenskenaarioita. Kannattavuuslaskelmien tuloksien analyysin jatkoksi pohdittiin Kotkan Energialle jatkotutkimusehdotelmia.

Vähempiarvoisen kalan käsittelyketjut ja hiilijalanjälki

The condition of Baltic Sea has weakened considerably because of eutrophication which has caused massive increase of devalued fish. The condition of Baltic Sea can be helped by fishing these fish. This study handles three different ways to approach those fish utilizations and counts carbon footprint for those three chains. Environmental point of views are also examined. There are three different fish processing chains. Every processing chain begins with fishing the fish in Baltic Sea. After that the fishes are prepared by crushing and some formic acid is added to ensure preservation. In the first processing chain the fishes are processed as biodiesel. The waste from the biodiesel process is taken to the anaerobic digestion and the forming methane is used as energy. In the second chain the fishes are taken straight to the anaerobic digestion after preparing. In the third chain, the fish will be first prepared and then taken to fur farms as forage. The carbon footprint has been calculated for 1000 kg fish. The carbon footprint in the first chain is 164-178 kg CO2e, in the second chain 313 – 333 kg CO2e and in the third chain 363 kg CO2e. In the processing chains the bioenergy is produced from the biodiesel, anaerobic digestion and from the glycerol, which is by-product of the biodiesel. The energy produced from the biodiesel is so-called emission neutral, which is not taken into account when calculating emissions. The energy is used to compensate the emissions caused by fossil fuels. The PAS 2050 was used to calculate the carbon footprint. Only carbon dioxide and methane were used when calculating the carbon footprint.

Jätehuoltosuunnitelman laatiminen elektroniikka-alan yritykselle

Sähkö- ja elektroniikka-alan yritykset eivät yleensä kuormita merkittävästi ympäristöä, sillä teollisuudenalan suurimmat ympäristövaikutukset aiheutuvat alihankkijoiden ja komponenttivalmistajien toiminnasta. Yritysten oma toiminta perustuu pitkälti tuotekehitykseen ja tuotteiden loppukokoonpanoon valmiista komponenteista. Syntynyt jäte on tyypillisesti pääosin pakkausjätettä, metalleja, kaatopaikkajätettä ja vähäisessä määrin myös ongelmajätettä. Vähäisen ympäristökuormituksen johdosta yrityksiltä ei yleensä vaadita ympäristölupaa. Diplomityössä laadittiin jätehuoltosuunnitelma elektroniikka-alan yritykselle. Työ suoritettiin Kemppi Oy:n toimeksiannosta Lahdessa. Jätehuoltosuunnitelman noudattaminen parantaa yrityksen julkisuuskuvaa ja tuo kustannussäästöjä. Toimivan suunnitelman laatiminen vaatii kuitenkin aikaa ja muita resursseja. Jätehuollon toimivuus on tarkistettava säännöllisesti, etenkin silloin kun yrityksen toiminnan painopiste muuttuu. Käytännön osuudessa kartoitettiin edellisvuosien jätemäärät ja yrityksen jätehuollon tila. Jätehuoltosuunnitelman laatimiselle oli selkeä tarve, koska jätehuolto perustui osin kirjoittamattomiin sääntöihin ja vanhoihin tottumuksiin. Syntypaikkalajittelua tehostettiin lisäämällä jäteastioita ja -pisteitä jätteiden syntypaikoille. Lajittelua parannettiin myös laatimalla selkeät ohjeet ja kouluttamalla työntekijöitä.

Utilization of retention chemicals in non-wood containing furnishes

The usage of the non-wood pulps in furnishes for various paper grades is the real alternative for substitution of wood fibres in the papermaking. This is especially important now, when the prices for wood are increasing and forest resources are depleting in many regions of our planet. However, there are several problems associated with utilization of such pulps. In terms of the papermaking process one of the main problems is the poor dewatering of the non-wood pulps. This problem can be partially solved by means of retention aids. In the literature part were described technological features of the non-wood pulps as the raw materials for paper production. Moreover, overviews of the retention chemicals and methods for retention measurement were done; special attention was paid to the mechanisms of retention and drainage. Finally, factors affecting on the drainage and retention of non-wood pulps were considered holistically. Particular emphasis was put on the possibility of enzyme treatment for drainage improvement. It was stated that retention aids can significantly improve dewatering of non-wood pulps. In the experimental part the goal was to investigate influence of various microparticle retention aids on the drainage, retention and formation of furnish containing wheat straw pulp, obtained by novel pulping process (Formico™Fib). The parallel test were performed with reference furnish containing only wood pulps. It was found that Bentonite-CPAM retention aid can significantly improve drainage and retention; however formation seems be suffer from such additives. It was stated that performance of the Silica-Starch retention aid significantly depends on the starch dosing sequence and wet-end conditions; this system have shown better formation than other tested retention aids. Silica-CPAM retention aid have provided comparable results in retention and drainage with Bentonite-CPAM, while Silica-starch did not improve dewatering and yielded in lowest filler retention among other aids. Ultimately, optimal dosages for the tested retention chemicals have been suggested.

Creating carbon footprint calculating tool for plastic packaging products

The environmental challenges of plastic packaging industry have increased remarkably along with climate change debate. The interest to study carbon footprints of packaging has increased in packaging industry to find out the real climate change impacts of packaging. In this thesis the greenhouse gas discharges of plastic packaging during their life cycle is examined. The carbon footprint is calculated for food packaging manufactured from plastic laminate. The structure of the laminate is low density polyethylene (PE-LD) and oriented polypropylene (OPP), which have been joined together with laminating adhesive. The purpose is to find out the possibilities to create a carbon footprint calculating tool for plastic packaging and its usability in a plastic packaging manufacturing company. As a carbon footprint calculating method PAS 2050 standard has been used. In the calculations direct and indirect greenhouse gas discharges as well as avoided discharges are considered. Avoided discharges are born for example in packaging waste utilization as energy. The results of the calculations have been used to create a simple calculating tool to be used for similar laminate structures. Although the utilization of the calculating tool is limited to one manufacturing plant because the primary activity data is dependent of geographical location and for example the discharges of used energy in the plant. The results give an approximation of the climate change potential caused by the laminate. It is although noticed that calculations do not include all environmental impacts of plastic packaging´s life cycle.

Utilization of non-wood pulp in different fibers products

The correct utilization of non-wood raw material allows reducing tree cutting and reduces emissions of carbon dioxide from burning of non-wood plants on farmers fields. Also it allows increasing economical situation in regions that non-wood plants are grown and where they are converted into pulp and paper. Also it gives positive effect on population pressure of work by addition of working place. In the literature survey included an overview of the historical meaning of non-wood pulp on developing paper production and structure of non-wood pulps. Moreover, anatomical and chemical composition of straw, reed and bamboo were studied more detailed. Also, an overview of the utilization of non-wood pulp in papermaking was made. Especially tissue, tree-free and release papers were reviewed. In the experimental part the goal was to investigate suitability of non-wood pulp like wheat straw pulp and bamboo pulp for different fiber products. Finally release and tree-free paper products were selected for experimental studies. It was discovered that wheat straw, especially screened wheat straw, showed good results for release paper. Also utilization of wheat straw and bamboo pulp in tree-free paper showed good results and suitability of these non-wood pulps for tree-free paper production. Also it was noticed that addition of wheat straw pulp gave positive effect on initial wet strength for release and tree-free paper.

Utilization of a Time Domain Simulator in the Technical and Economic Analysis of a Wind Turbine Electric Drive Train

The amount of installed wind power has been growing exponentially during the past ten years. As wind turbines have become a significant source of electrical energy, the interactions between the turbines and the electric power network need to be studied more thoroughly than before. Especially, the behavior of the turbines in fault situations is of prime importance; simply disconnecting all wind turbines from the network during a voltage drop is no longer acceptable, since this would contribute to a total network collapse. These requirements have been a contributor to the increased role of simulations in the study and design of the electric drive train of a wind turbine. When planning a wind power investment, the selection of the site and the turbine are crucial for the economic feasibility of the installation. Economic feasibility, on the other hand, is the factor that determines whether or not investment in wind power will continue, contributing to green electricity production and reduction of emissions. In the selection of the installation site and the turbine (siting and site matching), the properties of the electric drive train of the planned turbine have so far been generally not been taken into account. Additionally, although the loss minimization of some of the individual components of the drive train has been studied, the drive train as a whole has received less attention. Furthermore, as a wind turbine will typically operate at a power level lower than the nominal most of the time, efficiency analysis in the nominal operating point is not sufficient. This doctoral dissertation attempts to combine the two aforementioned areas of interest by studying the applicability of time domain simulations in the analysis of the economicfeasibility of a wind turbine. The utilization of a general-purpose time domain simulator, otherwise applied to the study of network interactions and control systems, in the economic analysis of the wind energy conversion system is studied. The main benefits of the simulation-based method over traditional methods based on analytic calculation of losses include the ability to reuse and recombine existing models, the ability to analyze interactions between the components and subsystems in the electric drive train (something which is impossible when considering different subsystems as independent blocks, as is commonly done in theanalytical calculation of efficiencies), the ability to analyze in a rather straightforward manner the effect of selections other than physical components, for example control algorithms, and the ability to verify assumptions of the effects of a particular design change on the efficiency of the whole system. Based on the work, it can be concluded that differences between two configurations can be seen in the economic performance with only minor modifications to the simulation models used in the network interaction and control method study. This eliminates the need ofdeveloping analytic expressions for losses and enables the study of the system as a whole instead of modeling it as series connection of independent blocks with no lossinterdependencies. Three example cases (site matching, component selection, control principle selection) are provided to illustrate the usage of the approach and analyze its performance.

Elinkaarimallintamisen sovelluskohteiden tunnistaminen yrityksissä

Tuotteen tai palvelun aiheuttamien ympäristövaikutusten arvioimiseksi on huomioitava koko elinkaari, eli kaikki vaiheet suunnittelusta, käytöstä poistoon. Elinkaariarviointi on tehokas työkalu tähän tarkoitukseen. Elinkaariajattelua voidaan ympäristövaikutusten lisäksi soveltaa myös kustannuksiin, jolloin pystytään löytämään aidosti kokonaiskustannuksiltaan edullisimpia vaihtoehtoja. Yritysten ei tarvitse nähdä ympäristöasioita tuotantoa haittaavina kuluerinä, vaan niitä voidaan käyttää myös lisäämään kilpailuetua ja voittoja. Ympäristövaikutusten määrittämisen lisäksi elinkaariarviointia voidaan käyttää mm. tuotekehityksen apuna, tuotannon optimoinnissa, markkinoinnissa sekä kritiikin torjunnassa. Hyvin tehty elinkaarikustannuslaskenta auttaa tunnistamaan tuotteen tai palvelun eri kustannuselementit, ja tätä kautta helpottaa säästötoimien kohdistamista. Tässä työssä kehitettiin viitekehys, minkä avulla voidaan löytää elinkaariarvioinnin ja elinkaarikustannuslaskennan sovelluskohteita, jotka toisivat mahdollista lisäarvoa tarkastelluille yrityksille. Menetelmää testattiin tapaustutkimuksella kahden esimerkkitapausyrityksen avulla. Molemmille tapauksille löydettiin useita erityyppisiä sovelluskohteita. Sovelluskohteiden toteutettavuudesta päättävät yritykset eikä sitä arvioida tässä työssä.

Outsourcing process in pharmaceutical product development

The aim of this study was to create an outsourcing process for pharmaceutical product development. This study focuses on two main questions. The first question is “What is the outsourcing process model?” In the second phase key success factors of the outsourcing process are identified. As a result of the literature reviews, a general outsourcing process was created. Transaction cost economics and resource based view were used to derived a theoretical framework to the process by combining the existing processes presented in the literature. The model of process is considered used to the outsourcing broadly. The general outsourcing process was then developed further with the key factors that affect the success of pharmaceutical product development and the interviews of pharmaceutical outsourcing experts. The result of the research was the process consists of seven phases with key activities and expected outputs for each of the phases. In addition, the strategic decision-making framework for outsourcing decision in pharmaceutical product development is giving as well as the tools for selecting supplier and preparing structured contract. This study also gives some recommendations for managing the outsourcing process.

Utilization of Incident Reporting in The Finnish Maritime Industry

Marine traffic is expected to increase rapidly in the future, both in the Baltic Sea and in the Gulf of Finland. As the number of vessels in the area increases, so does the risk of serious marine accidents. To help prevent such accidents in the future, the International Maritime Organization (IMO) has put forth the International Safety Management Code (the ISM Code), which aims to improve the safety of the vessels. The second work package of the Development of maritime safety culture (METKU) project investigates the effects of the ISM Code and potential areas of improvement in maritime safety. The first phase in the work package used a literature review to determine how maritime safety culture could be improved. Continuous improvement, management commitment and personnel empowerment and motivation were found to be essential. In the second phase, shipping companies and administrators were interviewed. It was discovered that especially incident reporting based on continuous improvement was felt to be lacking. This third phase aims to take a closer look at incident reporting and suggest improvements based on the findings. Both the IMO and national legislation encourage shipping companies in incident reporting, and on the national level a shared incident reporting system (ForeSea) is being pushed forward. The objective of this research project was to find out the IMO’s attitude towards incident reporting, to establish a theoretical framework of reference in incident reporting, and to observe how reporting is actually being employed on the seas. Existing incident reporting systems were also researched. The study was carried out using a literature review and the results previously gathered in interviews. The results of phase two were elaborated further for themes relating to incident reporting. According to the findings of this research, the theoretical background of incident reporting dates back to the early 20th century. Although some theories are widely accepted, some have also received criticism. The lack of a concise, shared terminology poses major difficulties in maritime incident reporting and in determining its efficiency. A central finding is the fact that existing incident reporting focuses mostly on information flow away from the ship, whereas the backward information flow is much less planned and monitored. In incident reporting, both nationally and internationally, stakeholders are plenty. The information produced by these parties is scattered, however, and thus not very usable. Based on this research, the centralizing of this information should be made a priority. Traditionally, the success of incident reporting has been determined statistically, from the number of reported incidents. Yet existing reporting systems have not been designed with such statistical analysis in mind, so different methodologies might yield a more comprehensive view. The previous findings of seafarers and management (including shipping companies and administration) having differing views on safety work and safety management were backed up by the results of this study. Seafarers find seamanship and storytelling important, while management wants a more systematic and broad approach on safety matters. The research project was carried out by the Centre for Maritime Studies of the University of Turku, in the Kotka unit (Maritime Logistics Research), with coordination by the Kotka Maritime Research Centre. The major financiers of the project were the European Union and the city of Kotka. The financing authority was the Regional Council of Päijät-Häme. Partners in the project were the shipping companies Finnlines Oyj, Kristina Cruises Oy, Meriaura Oy and VG-Shipping Oy, and the ports of Helsinki, Kotka and Hamina. The partners provided both funding for the project and information for the research.

Toimintaprosessin kehittäminen sairaalaympäristössä teollisuustalouden menetelmin

Työn tavoitteena on tutkia reaaliaikaisen sanelunpurun vaikuttavuutta ja kannattavuutta. Reaaliaikaisen sanelunpurun vaikuttavuuden tarkastelun pohjana käytetään teollisuustalouden puolella tunnettuja ja yrityksissä laajasti käytössä olevia ajatusmalleja, kuten Leania ja Six Sigmaa. Lean –ajattelu perustuu läpimenoajan nopeuttamiseen, hukkaa ja ei lisäarvoa luovien vaiheiden eliminoimisella. Six Sigma keskittyy taas laatuun, jolloin tuote ja palveluvirheitä karsitaan. Lisäksi teoriaosassa käsitellään palveluiden ulkoistamista, tietosuojaa ja palkkakustannusten rakennetta. Empiriaosassa kuvataan kirurgianpoliklinikan ja leikkausosaston prosesseja. Prosesseissa keskitytään nykytilan sekä reaaliaikaisen sanelunpurun vaikutuksiin. Prosessien kuvaamisella saadaan tietoa toiminnan ongelmista ja kehittämiskohteista. Henkilökunnan haastatteluin selvitettiin sanelujonon vaikutuksia sekä kokemuksia ulkoistamisesta. Kustannusanalyysin avulla selvitettiin ulkoistamisen kannattavuutta reaaliaikaisessa sanelunpurussa. Työn tuloksena saatiin vaikuttavuus tarkastelu reaaliaikaisesta sanelunpurusta sekä ulkoistamisen kannattavuudesta. Prosessien kuvaaminen osoittaa, että useissa prosessin eri vaiheissa sanelujen puuttuminen aiheuttaa kustannuksia ja vaikuttaa henkilökunnan työhön. Kustannusanalyysin pohjalta sanelunpurun ulkoistaminen todettiin kannattavaksi. Jatkossa sanelunpurun ulkoistamisessa tulee kiinnittää huomiota siihen, mitkä osat sanelunpurkuprosessista halutaan ulkoistaa. Sähköisten järjestelmien kehittyminen vaikuttaa osaltaan tähän päätökseen. Lisäksi suoritepohjaisen hinnoittelun kehittäminen on tärkeä osa sanelunpurkuprosessin tehokkuutta.