Cidadania organizacional na perspectiva dos direitos e deveres e sua relação com justiça e estresse organizacional

Tese (doutorado)—Universidade de Brasília, Instituto de Psicologia, Departamento de Psicologia Social e do Trabalho, Programa de Pós-Graduação em Psicologia Social, do Trabalho e das Organizações, 2016.

Formação e ação docente: desenvolvendo competências profissionais

O livro tem como fio condutor a ação docente na sua relação com os níveis (macro, meso e micro) em que ela se desenvolve, com a formação profissional que visa dar resposta às distintas demandas da educação escolar, com práticas de ensino e com modos de organização do trabalho docente. O livro integra doze textos de diferentes autores com vinculações institucionais diferentes e diversas (a universidade e a escola) e aborda as problemáticas da governação das escolas, dos professores, da sua formação inicial e continuada para o desenvolvimento de competências profissionais e das práticas de gestão pedagógica e curricular.

Desenvolvimento de pastas de cimento flexíveis para poços de petróleo submetidos à injeção de vapor utilizando látex do tipo SBR

Novel cementing materials formulations containing flexible polymeric admixtures have been studied aiming at improving the mechanical behavior of oil well cement slurries submitted to steam injection. However, research activities in this sector are still under development. The steam injected directly into the well causes casing dilation, which after a reduction in temperature, tends to return to its original dimensions, resulting in crack formation and hydraulic isolation loss of the well, which will result in shortening of well life. In this scenario, the objective of the present study was to evaluate the mechanical behavior of Portland-based slurries containing SBR latex, applied in oil well cementing of wells submitted to steam injection. Were formulated slurries with densities of 1.797 g/cm3 (15.0 lb/Gal) and 1.869 g/cm3 (15.6 lb/Gal), containing admixtures with a latex concentration of 0; 66.88; 133.76; 200.64 and 267.52 L/m3 (0, 0.5, 1.0, 1.5 and 2.0 gpc). Tests including rheology, fluid loss control, thickening time, API compressive strength and splitting tensile strength, beyond steam injection simulation. Microstrutural characteristics of the slurries were also performed (XRD, TG, FTIR and SEM). The results showed that increasing the polymer concentration increased in the rheological properties and fluid loss, and a decrease in the elasticity modulus of the cement slurries. The results obtained showed that the slurries can be applied in cementing operations of oil wells submitted to steam injection.

Degradação do PMMA através da reação despolimerização uitlizando catalisadores de óxidos mistos

In this work, mixed oxides were synthesized by two methods: polymeric precursor and gel-combustion. The oxides, Niquelate of Lanthanum, Cobaltate of Lanthanum and Cuprate of Lanthanum were synthesized by the polymeric precursor method, and treated at 300 º C for 2 hours, calcined at 800 º C for 6h in air atmosphere. In gel-combustion method were produced and oxides using urea and citric acid as fuel, forming for each fuel the following oxides Ferrate of Lanthanum, Cobaltato of Lanthanum and Ferrato of Cobalt and Lanthanum, which were submitted to the combustion process assisted by microwave power maximum of 10min. The samples were characterized by: thermogravimetric analysis, X-ray diffraction; fisisorção of N2 (BET method) and scanning electron microscopy. The reactions catalytic of depolymerization of poly (methyl methacrylate), were performed in a reactor of silica, with catalytic and heating system equipped with a data acquisition system and the gas chromatograph. For the catalysts synthesized using the polymeric precursor method, the cuprate of lanthanum was best for the depolymerization of the recycled polymer, obtaining 100% conversion in less time 554 (min), and the pure polymer, was the Niquelate of Lanthanum, with 100% conversion in less time 314 (min). By gel-combustion method using urea as fuel which was the best result obtained Ferrate of Lanthanum for the pure polymer with 100% conversion in less time 657 (min), and the recycled polymer was Cobaltate of Lanthanum with 100 % conversion in less time 779 (min). And using citric acid to obtain the best result for the pure polymer, was Ferrate of Lanthanum with 100% conversion in less time 821 (min and) for the recycled polymer, was Ferrate of Lanthanum with 98.28% conversion in less time 635 (min)

Polyplexes based on ultrapure oligochitosans: design, characterization and applications for gene therapy.

253 p.

Design of functional hybrid coatings with anti-biofouling, self-cleaning and anti-reflecting applications

263 p.

Formulação de pastas cimentícias com adição de suspensões de quitosana para cimentação de poços de petróleo

Primary cementing is one of the main operations in well drilling responsible for the mechanical stability and zonal isolation during the production of oil. However, the cement sheath is constantly under mechanical stresses and temperature variations caused by the recovery of heavy oil. In order to minimize fracture and wear of the cement sheath, new admixtures are developed to improve the properties of Portland cement slurries and avoid environmental contamination caused by leaking gas and oil. Polymers with the ability to form polymeric films are candidates to improve the properties of hardened cement slurries, especially their fracture energy. The present study aimed at evaluating the effect of the addition of a chitosan suspension on cement slurries in order to improve the properties of the cement and increase its performance on heavy oil recovery. Chitosan was dissolved in acetic ac id (0.25 M and 2 M) and added to the formulation of the slurries in different concentrations. SEM analyses confirmed the formation of polymeric films in the cementitious matrix. Strength tests showed higher fracture energy compared to slurries without the addition of chitosan. The formation of the polymeric films also reduced the permeability of the slurry. Therefore, chitosan suspensions can be potentially used as cementing admixtures for heavy oil well applications

O efeito do tratamento da atapulgita no desenvolvimento de compósito com o polietileno reciclado

The study aimed at the treatment of attapulgite for the development and characterization of composite recycled low density polyethylene - PEBD_rec embedded with natural attapulgite - ATP_NAT, sifted - ATP_PN and attapulgite treated with sulfuric acid - ATP_TR in different compositions (1, 3 and 5%) and compared with the PEBD_rec. The atapulgitas, natural, screened and treated, were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and determining the area specific surface (BET). The composites were characterized by thermogravimetry (TG), differential scanning calorimetry (DSC), Xray diffraction (XRD), torque rheometry, scanning electron microscopy (SEM) and traction. The composite PEBD_rec / ATP (natural, sieved and treated) were produced by mixing in the molten state in a single screw extruder matrix wire with subsequent reprocessing matrix tape. It was found that the screening of attapulgite not reduce the quantity of quartz and the acid treatment completely extracted dolomite aggregate impurities of the channels attapulgite, and increase their surface area. The addition of attapulgite in PEBD_rec acts as a catalyst, reducing the thermal stability of the polymer. The increased concentration of attapulgite, increases resistance and reduces the elongation at break and modulus of elasticity of the composite PEBD_rec / attapulgite

O crime de condução perigosa de veículo rodoviário e a sua perceção pelos militares da GNR afetos a fiscalização rodoviária

The Republican National Guard has a core role concerning the security of Portugal’s roads since a significant part of them are under its responsibility. Dangerous driving is a crime that happens less times that other two crimes (driving without a license and driving under the influence), but it isn’t covered by the media like those two, much to the small number of reports written by the Security Forces. This work aims to approach the particularity of this crime given it poses a real threat and because its report requirements are far demanding. The thesis is divided in two parts. The first one develops the theory frame through the analysis of documents. The second part deals with the processing of fines from selected samples. The conclusion of this study states that there is a way of reducing situations that could result in this type of crime using fines. Other conclusion points to the fact that the time gap between the occurrence of the crime and a judge’s sentence is substantial, meaning that the military from the Republican National Guard often opt for the second option because the sentences and the security measures for this crime can often find parallel in other type of crimes. The about 200 sentences reached per day from courts all over the country when tied to the 700/800 criminal defenses mean that the National Authority for Road Security is overloaded with administrative work, which is a problem that could be surpassed with the implementation of a new document and a different access to the data of each driver through the National Authority for Road Security’s website.

O que é uma crise financeira? Breve contribuito para a tipificação do conceito

As crises financeiras ocorridas entre finais do século XX e o início do século XXI atingiram proporções diversas que afetaram, de modo particular, o sistema bancário. Porém, as diversas crises consideradas revelaram ritmos desiguais, emergindo em pontos diferentes do globo e gerando impactos também desiguais. O objetivo do presente trabalho é o de discutir os diversos conceitos de crise financeira presentes na literatura. Tendo por base as crises financeiras recentes, pretendemos detetar os seus elementos constitutivos, na senda da tipificação de um conceito de crise financeira. Desde logo, o conceito de crise financeira é, por excelência, um conceito inacabado, onde concorrem múltiplas vertentes, nomeadamente de natureza bancária, monetária e cambial, que obstam à delimitação das suas fronteiras conceptuais. É certo que cada crise difere da que a antecedeu, consequência direta do tempo histórico que promove a sua particularidade. Porém, alguns elementos estão sempre presentes e que estão na base da sua ignificação. Este trabalho encontra-se organizado do seguinte modo: no capítulo 1, apresentam-se alguns contributos explicativos das causas subjacentes às crises financeiras; no capítulo 2, discutem-se os episódios de crise mais relevantes, ocorridos entre finais do século XX até ao presente; no Capítulo 3, procuraremos detetar um fio condutor entre as crises observadas, tendo em vista a tipificação de um conceito de crise, bem como discutir os seus mecanismos de previsão e de prevenção. Por fim, apresenta-se uma breve conclusão.

Método de derivación e integración de orden arbitrario en el modelado mecánico y dieléctrico de materiales poliméricos

En este trabajo se presenta el desarrollo de un Modelo Fraccional Mecánico y un Modelo Fraccional Dieléctrico, con la finalidad de describir las manifestaciones mecánicas y dieléctricas de la viscolesticidad de un polímero semicristalino (PEN) que presenta 3 fenómenos de relajación.

Tratamentos de fibras de carnaúba [copernicia prunífera (miller) h. e. moore] para o desenvolvimento de compósito biodegradável com matriz de polihidroxibutirato

The use of raw materials from renewable sources for production of materials has been the subject of several studies and researches, because of its potential to substitute petrochemical-based materials. The addition of natural fibers to polymers represents an alternative in the partial or total replacement of glass fibers in composites. In this work, carnauba leaf fibers were used in the production of biodegradable composites with polyhydroxybutyrate (PHB) matrix. To improve the interfacial properties fiber / matrix were studied four chemical treatments to the fibers..The effect of the different chemical treatments on the morphological, physical, chemical and mechanical properties of the fibers and composites were investigated by scanning electron microscopy (SEM), infrared spectroscopy, X-ray diffraction, tensile and flexural tests, dynamic mechanical analysis (DMA), thermogravimetry (TGA) and diferential scanning calorimetry (DSC). The results of tensile tests indicated an increase in tensile strength of the composites after the chemical treatment of the fibers, with best results for the hydrogen peroxide treated fibers, even though the tensile strength of fibers was slightly reduced. This suggests a better interaction fiber/matrix which was also observed by SEM fractographs. The glass transition temperature (Tg) was reduced for all composites compared to the pure polymer which can be attributed to the absorption of solvents, moisture and other low molecular weight molecules by the fibers

Processamento e caracterização de compósitos Poli(METACRILATO DE METILA)/Sílica (PMMA/SiO2)

Currently the search for new materials with properties suitable for specific applications has increased the number of researches that aim to address market needs. The poly (methyl methacrylate) (PMMA) is one of the most important polymers of the family of polyacrylates and polymethacrylates, especially for its unique optical properties and weathering resistance, and exceptional hardness and gloss. The development of polymer composites by the addition of inorganic fillers to the PMMA matrix increases the potential use of this polymer in various fields of application. The most commonly used inorganic fillers are particles of silica (SiO2), modified clays, graphite and carbon nanotubes. The main objective of this work is the development of PMMA/SiO2 composites at different concentrations of SiO2, for new applications as engineering plastics. The composites were produced by extrusion of tubular film, and obtained via solution for application to commercial PMMA plates, and also by injection molding, for improved the abrasion and scratch resistance of PMMA without compromising transparency. The effects of the addition of silica particles in the polymer matrix properties were evaluated by the maximum tensile strength, hardness, abrasion and scratch resistance, in addition to preliminary characterization by torque rheometry and melt flow rate. The results indicated that it is possible to use silica particles in a PMMA matrix, and a higher silica concentration produced an increase of the abrasion and scratch resistance, hardness, and reduced tensile strength

Hematina como catalizador biomimético en la síntesis de polianilina conductora.

El propósito de este trabajo fue la polimerización de la anilina utilizando la hematina como catalizador biomimético en un medio de reacción ácido utilizando como disolvente el ácido acético, lo cual permitió realizar la síntesis de polianilina sin la necesidad de usar “plantillas” las cuales afectan las propiedades electroquímicas del producto final. El polímero sintetizado mediante esta técnica mostró buenas características estructurales tal y como lo demostraron los espectros de FTIR y UV-Vis. Además de contar con una buena cristalinidad y estabilidad térmica, como se pudo constatar en las pruebas de DRX y TGA respectivamente. La conductividad eléctrica, la electroactividad y la reversibilidad oxidativa de la polianilina sintetizada fueron bastante aceptables considerando las condiciones de síntesis. Finalmente el proceso de optimización de la reacción llevó a rendimientos de hasta 70%.