Homoclinic Splitting without Trees

We study a Hamiltonian describing a pendulum coupled with several anisochronous oscillators, giving a simple construction of unstable KAM tori and their stable and unstable manifolds for analytic perturbations. When the coupling takes place through an even trigonometric polynomial in the angle variables, we extend analytically the solutions of the equations of motion, order by order in the perturbation parameter, to a large neighbourhood of the real line representing time. Subsequently, we devise an asymptotic expansion for the splitting (matrix) associated with a homoclinic point. This expansion consists of contributions that are manifestly exponentially small in the limit of vanishing gravity, by a shift-of-countour argument. Hence, we infer a similar upper bound for the splitting itself. In particular, the derivation of the result does not call for a tree expansion with explicit cancellation mechanisms.

Influence of site, storage and steaming on Eucalyptus nitens log-end splitting

Key message Log-end splitting is one of the single most important defects in veneer logs. We show that log-end splitting in the temperate plantation species Eucalyptus nitens varies across sites and within-tree log position and increases with time in storage. Context Log-end splitting is one of the single most important defects in veneer logs because it can substantially reduce the recovery of veneer sheets. Eucalyptus nitens can develop log-end splits, but factors affecting log-end splitting in this species are not well understood. Aims The present study aims to describe the effect of log storage and steaming on the development of log-end splitting in logs from different plantations and log positions within the tree. Methods The study was conducted on upper and lower logs from each of 41 trees from three 20–22-year-old Tasmanian E. nitens plantations. Log-end splitting was assessed immediately after felling, after transport and storage in a log-yard, and just before peeling. A pre-peeling steam treatment was applied to half the logs. Results Site had a significant effect on splitting, and upper logs split more than lower logs with storage. Splitting increased with tree diameter breast height (DBH), but this relationship varied with site. The most rapidly growing site had more splitting even after accounting for DBH. No significant effect of steaming was detected. Conclusion Log-end splitting varied across sites and within-tree log position and increased with time in storage.

Thin-walled timber and FRP-timber veneer composite CEE-sections

This paper compares the structural performance between thin-walled timber and FRP-timber composite Cee-sections. While, thin-walled composite timber structures have been proven to be efficient and ultra-light structural elements, their manufacturing is difficult and labour intensive. Significant effort and time is required to prevent the cracking of the transverse timber veneers, bent in the grain direction, when forming the cross-sectional shape. FRP-timber structures overcome this disadvantage by replacing the transverse veneers with flexible, unidirectional FRP material and only keeping the timber veneers which are bent in their natural rolling direction. The Cee-sections investigated in this study were 210 mm deep × 90 mm wide × 500 mm high and manufactured from five plies. For both section types, the three internal plies were thin (1 mm thick) softwood Hoop pine (Araucaria cunninghamii) veneers, orientated along the section longitudinal axis. The two outer layers, providing bending stiffness to the walls, were Hoop pine veneers (1 mm thick) for the timber sections and glass fibre reinforced plastic (0.73 mm thick) for the FRP-timber sections orientated perpendicular to the inner layers. The manufacturing process is briefly introduced in this paper. The profiles were fitted with strain gauges and tested in compression. Linear Variable Displacement Transducers also recorded the buckling along one flange. The test results are presented and discussed in this paper in regards to their structural behaviour and performance. Results showed that the use of FRP in the sections increases both the elastic local buckling load and section capacity, the latter being increased by about 24 percent. The results indicate that thin-walled FRP-timber can ultimately be used as a sustainable alternative to cold-formed steel profiles.

Characterisation of wood–water relationships and transverse anatomy and their relationship to drying degrade

Characterisation of a number of key wood properties utilising ‘state of the art’ tools was achieved for four commercial Australian hardwood species: Corymbia citriodora, Eucalyptus pilularis, Eucalyptus marginata and Eucalyptus obliqua. The wood properties were measured for input into microscopic (cellular level) and macroscopic (board level) vacuum drying models currently under development. Morphological characterisation was completed using a combination of ESEM, optical microscopy and a custom vector-based image analysis software. A clear difference in wood porosity, size, wall thickness and orientation was evident between species. Wood porosity was measured using a combination of fibre and vessel porosity. A highly sensitive microbalance and scanning laser micrometres were used to measure loss of moisture content in conjunction with directional shrinkage on micro-samples of E. obliqua to investigate the validity of measuring collapse-free shrinkage in very thin sections. Collapse-free shrinkage was characterised, and collapse propensity was verified when testing thicker samples. Desorption isotherms were calculated for each species using wood–water relations data generated from shrinkage experiments. Fibre geometry and wood shrinkage anisotropy were used to explain the observed difficulty in drying of the different species in terms of collapse and drying stress-related degrade.

Discontinuities in an arbitrarily moving gas in special relativity

Singular surface theory and ray theory are used to study the propagation of a weak discontinuity in an arbitrarily moving gas within the framework of special relativity. A differential equation is obtained describing the variation of the strength of the discontinuity along rays.

Numerical approaches to new particle formation and growth in the atmosphere

Aerosols impact the planet and our daily lives through various effects, perhaps most notably those related to their climatic and health-related consequences. While there are several primary particle sources, secondary new particle formation from precursor vapors is also known to be a frequent, global phenomenon. Nevertheless, the formation mechanism of new particles, as well as the vapors participating in the process, remain a mystery. This thesis consists of studies on new particle formation specifically from the point of view of numerical modeling. A dependence of formation rate of 3 nm particles on the sulphuric acid concentration to the power of 1-2 has been observed. This suggests nucleation mechanism to be of first or second order with respect to the sulphuric acid concentration, in other words the mechanisms based on activation or kinetic collision of clusters. However, model studies have had difficulties in replicating the small exponents observed in nature. The work done in this thesis indicates that the exponents may be lowered by the participation of a co-condensing (and potentially nucleating) low-volatility organic vapor, or by increasing the assumed size of the critical clusters. On the other hand, the presented new and more accurate method for determining the exponent indicates high diurnal variability. Additionally, these studies included several semi-empirical nucleation rate parameterizations as well as a detailed investigation of the analysis used to determine the apparent particle formation rate. Due to their high proportion of the earth's surface area, oceans could potentially prove to be climatically significant sources of secondary particles. In the lack of marine observation data, new particle formation events in a coastal region were parameterized and studied. Since the formation mechanism is believed to be similar, the new parameterization was applied in a marine scenario. The work showed that marine CCN production is feasible in the presence of additional vapors contributing to particle growth. Finally, a new method to estimate concentrations of condensing organics was developed. The algorithm utilizes a Markov chain Monte Carlo method to determine the required combination of vapor concentrations by comparing a measured particle size distribution with one from an aerosol dynamics process model. The evaluation indicated excellent agreement against model data, and initial results with field data appear sound as well.

Studies on Binary Time Series Models with Applications to Empirical Macroeconomics and Finance

This thesis studies binary time series models and their applications in empirical macroeconomics and finance. In addition to previously suggested models, new dynamic extensions are proposed to the static probit model commonly used in the previous literature. In particular, we are interested in probit models with an autoregressive model structure. In Chapter 2, the main objective is to compare the predictive performance of the static and dynamic probit models in forecasting the U.S. and German business cycle recession periods. Financial variables, such as interest rates and stock market returns, are used as predictive variables. The empirical results suggest that the recession periods are predictable and dynamic probit models, especially models with the autoregressive structure, outperform the static model. Chapter 3 proposes a Lagrange Multiplier (LM) test for the usefulness of the autoregressive structure of the probit model. The finite sample properties of the LM test are considered with simulation experiments. Results indicate that the two alternative LM test statistics have reasonable size and power in large samples. In small samples, a parametric bootstrap method is suggested to obtain approximately correct size. In Chapter 4, the predictive power of dynamic probit models in predicting the direction of stock market returns are examined. The novel idea is to use recession forecast (see Chapter 2) as a predictor of the stock return sign. The evidence suggests that the signs of the U.S. excess stock returns over the risk-free return are predictable both in and out of sample. The new "error correction" probit model yields the best forecasts and it also outperforms other predictive models, such as ARMAX models, in terms of statistical and economic goodness-of-fit measures. Chapter 5 generalizes the analysis of univariate models considered in Chapters 2 4 to the case of a bivariate model. A new bivariate autoregressive probit model is applied to predict the current state of the U.S. business cycle and growth rate cycle periods. Evidence of predictability of both cycle indicators is obtained and the bivariate model is found to outperform the univariate models in terms of predictive power.

Kriitkko Einari J. Vehmas ja moderni taide

The doctoral dissertation Critic Einari J. Vehmas and Modern Art deals with one of the central figures of the Finnish art scene and his work as an art critic, art museum curator and cultural critic. The main body of research material consists of the writings of Einari J. Vehmas (1902 1980) from 1937 to the late 1960s. Vehmas wrote art reviews for magazines, and from the year 1945 he was a regular art critic for one of the major newspapers in Finland. Vehmas was heavily inclined towards French literature and visual arts. Marcel Proust and Charles Baudelaire influenced his views on the nature of art from the late 1920s onwards. Vehmas is commonly regarded as the most influential art critic of post-war Finland. His writings have been referred to and cited in numerous research papers on Finnish 20th-century art. A lesser known aspect of his work is his position as the deputy director of the Ateneum Art Museum, the Finnish national gallery. Through his art museum work, his opinions also shaped the canon of modern art considered particularly Finnish following the second world war. The main emphasis of the dissertation is on studying Vehmas s writings, but it also illustrates the diversity of his involvement in Finnish cultural life through biographical documents. The long chronological span of the dissertation emphasises how certain central themes accumulate in Vehmas s writings. The aim of the dissertation is also to show how strongly certain philosophical and theoretical concepts from the early 20th century, specifically Wassily Kandinsky s principle of inner necessity and Henri Bergson s epistemology highlighting intuition and instinct, continued to influence the Finnish art discourse even in the early 1960s, in part thanks to the writings of Vehmas. Throughout his production, Vehmas contemplated the state and future of modern art and humanity. Vehmas used a colourful, vitalistic rhetoric to emphasise the role of modern art as a building block of culture and humanity. At the same time, however, he was a cultural pessimist whose art views became infused with anxiety, a sense of loss, and a desire to turn his back on the world.

Julkisen tilan kontrollin ulottuvuuksia : tapaustutkimus Stop Töhryille -projektista.

Tämä tutkielma keskittyy julkisen kaupunkitilan kontrollin eri muotoihin. Ihmiset käyttävät kaupunkitilaa eri tavoin ja eri tarkoituksiin. Tilan sallitut ja kielletyt käyttömuodot ovat aina erilaisten toiveiden yhteensovittamista: yhteisen neuvottelun tulos. Tilaa myös kontrolloidaan vastaamaan erilaisia toiveita ja odotuksia. Tutkielmassa julkisen tilan kontrollin muodot on jaettu kolmeen: tilan fyysinen muokkaaminen, tilan valvonta ja asenteisiin vaikuttaminen esimerkiksi politiikkaohjelmilla. Tärkeimpänä kiinnostuksen kohteena on tilanne, jossa jokin toiminta kielletään kokonaisuudessaan. Tutkielmassa käytetään konkreettisena esimerkkinä yrityksestä kontrolloida tilaa Helsingin kaupungin Stop Töhryille -projektia: kyseessä on tapaustutkimus em. projektista. Projekti toteutettiin vuosina 1998–2008 Helsingin kaupungin rakennusviraston sekä yleisten töiden lautakunnan alaisuudessa. Projektin tavoitteena oli vähentää ja poistaa kaupunkitilassa näkyviä graffiteja. Keinoina tähän oli tekninen siivous, valvonta ja viestintä. Graffitit voidaan nähdä yhtenä keinona vallata tilaa itselle. Tutkimuksen ongelmanasettelun taustalla on pohdinta siitä, kohdistuuko julkisen tilan kontrolli jonkin tietyn toiminnon ei-toivottavuuteen vai kohdistuuko kontrolli tiettyjen toimijoiden ei-toivottavuuteen. Tavoitteena on selvittää, minkälainen tilan kontrolliin tähtäävä ohjelma Stop Töhryille -projekti oli. Tutkimuskysymykset liittyvät siihen, miksi projekti toteutettiin, mihin projektin toimenpiteet kohdistuivat ja miten nollatoleranssi määriteltiin projektissa. Tutkielman teoreettinen viitekehys pohjautuu Jock Youngin määritelmälle nollatoleranssista, nollatoleranssin kritiikille sekä Henri Lefebvren, Don Mitchellin, Andrea Sharkeyn ja Rob Shieldsin kirjoituksiin oikeudesta tilaan. Aineistona käytetään yleisten töiden lautakunnan kokousten esityslista- ja pöytäkirjamateriaalia sekä haastatteluja projektissa mukana olleille tai projektiin vaikuttaneille tahoille (N=4). Analyysin menetelmänä sovelletaan diskurssianalyysiä. Aineiston perusteella voidaan todeta, että projektissa hyödynnettiin laajasti erilaisia kontrollin keinoja. Projektin toimenpiteet keskittyivät alussa enemmän toimintoon (graffitien puhdistamiseen ja ehkäisyyn), mutta viimeisinä vuosina painopiste siirtyi enemmän toimijaan (graffitintekijään). Aineiston analyysissä yhtenä olennaisena toimijaryhmänä esille nousivat nuoret ja nuoriso, jotka mainittiin useaan otteeseen graffitintekijöinä. Tutkielmassa tätä ilmiötä pohditaan Mike Presdeen nuoruuden kriminalisointi -käsitteen sekä Zygmunt Baumanin ulossulkemisen paradigman kautta. Nollatoleranssiretoriikka on löydettävissä projektista kolmella tasolla: ideologisella, toiminnallisella sekä viestinnällisellä. Nollatoleranssia perusteltiin ideologisella tasolla rikottujen ikkunoiden teesillä: pieniä sosiaalisia häiriöitä poistamalla voidaan ehkäistä suuria rikoksia. Tämä perustelu vietiin toiminnalliselle tasolle, jossa häiriökäyttäytyjiä valvottiin ja heille vaadittiin kovia rangaistuksia. Viestinnällä pyrittiin madaltamaan kansalaisten sietokykyä graffiti-ilmiöön ja edesautettiin mahdollisimman laajan kansalais- ja asukasyhteistyön syntymistä. Lisäksi projektissa luotiin aktiivisesti tiedon ja kielen politiikkaa, joissa tuotetaan käsitystä siitä että graffitit lisäävät turvattomuutta ja konstruoidaan sellainen kieli, jossa graffitit nähdään ongelmana.

The Problem of Implementation and its Relation to the Philosophy of Cognitive Science

According to certain arguments, computation is observer-relative either in the sense that many physical systems implement many computations (Hilary Putnam), or in the sense that almost all physical systems implement all computations (John Searle). If sound, these arguments have a potentially devastating consequence for the computational theory of mind: if arbitrary physical systems can be seen to implement arbitrary computations, the notion of computation seems to lose all explanatory power as far as brains and minds are concerned. David Chalmers and B. Jack Copeland have attempted to counter these relativist arguments by placing certain constraints on the definition of implementation. In this thesis, I examine their proposals and find both wanting in some respects. During the course of this examination, I give a formal definition of the class of combinatorial-state automata , upon which Chalmers s account of implementation is based. I show that this definition implies two theorems (one an observation due to Curtis Brown) concerning the computational power of combinatorial-state automata, theorems which speak against founding the theory of implementation upon this formalism. Toward the end of the thesis, I sketch a definition of the implementation of Turing machines in dynamical systems, and offer this as an alternative to Chalmers s and Copeland s accounts of implementation. I demonstrate that the definition does not imply Searle s claim for the universal implementation of computations. However, the definition may support claims that are weaker than Searle s, yet still troubling to the computationalist. There remains a kernel of relativity in implementation at any rate, since the interpretation of physical systems seems itself to be an observer-relative matter, to some degree at least. This observation helps clarify the role the notion of computation can play in cognitive science. Specifically, I will argue that the notion should be conceived as an instrumental rather than as a fundamental or foundational one.