Governance mode vs. governance fit: Performance implications of make-or-ally choices for product innovation in the worldwide aircraft industry, 1942-2000

We examine the impact of governance mode and governance fit on performance in make-or-ally decisions. We argue that while horizontal collaboration and autonomous governance have direct and countervailing performance implications, the alignment of make-or-ally choices with the focal firm's resource endowment and the activity's resource requirements leads to better performance. Data on the aircraft industry show that relative to aircraft developed autonomously, collaborative aircraft exhibit greater sales but require longer time-to-market. However, governance fit increases unit sales and reduces time-to-market. We contribute to the alliance and economic organization literatures. (Copyright © 2013 John Wiley & Sons, Ltd.)

Doses monitoring in radiology: calibration of air kerma-area product (PKA) meters

Objective The authors have sought to study the calibration of a clinical PKA meter (Diamentor E2) and a calibrator for clinical meters (PDC) in the Laboratory of Ionizing Radiation Metrology at Instituto de Energia e Ambiente - Universidade de São Paulo. Materials and Methods Different qualities of both incident and transmitted beams were utilized in conditions similar to a clinical setting, analyzing the influence from the reference dosimeter, from the distance between meters, from the filtration and from the average beam energy. Calibrations were performed directly against a standard 30 cm3 cylindrical chamber or a parallel-plate monitor chamber, and indirectly against the PDC meter. Results The lowest energy dependence was observed for transmitted beams. The cross calibration between the Diamentor E2 and the PDC meters, and the PDC presented the greatest propagation of uncertainties. Conclusion The calibration coefficient of the PDC meter showed to be more stable with voltage, while the Diamentor E2 calibration coefficient was more variable. On the other hand, the PDC meter presented greater uncertainty in readings (5.0%) than with the use of the monitor chamber (3.5%) as a reference.

Design and Validation of a Novel Generic Platform for the Production of Tetravalent IgG1-like Bispecific Antibodies.

We have designed and validated a novel generic platform for production of tetravalent IgG1-like chimeric bispecific Abs. The VH-CH1-hinge domains of mAb2 are fused through a peptidic linker to the N terminus of mAb1 H chain, and paired mutations at the CH1-CL interface mAb1 are introduced that force the correct pairing of the two different free L chains. Two different sets of these CH1-CL interface mutations, called CR3 and MUT4, were designed and tested, and prototypic bispecific Abs directed against CD5 and HLA-DR were produced (CD5xDR). Two different hinge sequences between mAb1 and mAb2 were also tested in the CD5xDR-CR3 or -MUT4 background, leading to bispecific Ab (BsAbs) with a more rigid or flexible structure. All four Abs produced bound with good specificity and affinity to CD5 and HLA-DR present either on the same target or on different cells. Indeed, the BsAbs were able to efficiently redirect killing of HLA-DR(+) leukemic cells by human CD5(+) cytokine-induced killer T cells. Finally, all BsAbs had a functional Fc, as shown by their capacity to activate human complement and NK cells and to mediate phagocytosis. CD5xDR-CR3 was chosen as the best format because it had overall the highest functional activity and was very stable in vitro in both neutral buffer and in serum. In vivo, CD5xDR-CR3 was shown to have significant therapeutic activity in a xenograft model of human leukemia.

Chlamydiaceae and Chlamydia-like organisms in the koala (Phascolarctos cinereus)--organ distribution and histopathological findings.

Chlamydial infections in koalas can cause life-threatening diseases leading to blindness and sterility. However, little is known about the systemic spread of chlamydiae in the inner organs of the koala, and data concerning related pathological organ lesions are limited. The aim of this study was to perform a thorough investigation of organs from 23 koalas and to correlate their histopathological lesions to molecular chlamydial detection. To reach this goal, 246 formalin-fixed and paraffin embedded organ samples from 23 koalas were investigated by histopathology, Chlamydiaceae real-time PCR and immunohistochemistry, ArrayTube Microarray for Chlamydiaceae species identification as well as Chlamydiales real-time PCR and sequencing. By PCR, two koalas were positive for Chlamydia pecorum whereas immunohistochemical labelling for Chlamydiaceae was detected in 10 tissues out of nine koalas. The majority of these (n=6) had positive labelling in the urogenital tract related to histopathological lesions such as cystitis, endometritis, pyelonephritis and prostatitis. Somehow unexpected was the positive labelling in the gastrointestinal tract including the cloaca as well as in lung and spleen indicating systemic spread of infection. Uncultured Chlamydiales were detected in several organs of seven koalas by PCR, and four of these suffered from plasmacytic enteritis of unknown aetiology. Whether the finding of Chlamydia-like organisms in the gastrointestinal tract is linked to plasmacytic enteritis is unclear and remains speculative. However, as recently shown in a mouse model, the gastrointestinal tract might play a role being the site for persistent chlamydial infections and being a source for reinfection of the genital tract.

Parachlamydia spp. and related Chlamydia-like organisms and bovine abortion.

Chlamydophila abortus and Waddlia chondrophila cause abortion in ruminants. We investigated the role of Parachlamydia acanthamoebae in bovine abortion. Results of immunohistochemical analyses were positive in 30 (70%) of 43 placentas from which Chlamydia-like DNA was amplified, which supports the role of Parachlamydia spp. in bovine abortion.

Catálise eletroquímica da redução do bromato em superfícies modificadas por filmes de molibdênio

In this paper some studies concerning the electroreduction of Mo(VI) in sulphuric acid solutions are described. We have shown that at suitable experimental conditions very stable molybdenum oxide films can be electrochemically deposited at glassy carbon electrodes, the reduction of bromate occurring at less negative potentials on the modified surface. Coulometric experiments have shown that bromide is not the only product of the catalytic bromate reduction by the molybdenum film and species like BrO2 may have part in this process. Based on chronoamperometric curves recorded at -0.60 V, analytical curves have been obtained for the reduction of bromate in the 0.1 - 0.8 mM range, a limit of detection of 20 µM for bromate being determined.

Tuotetiedon soveltaminen varastotiedon hallinnan parantamisessa

Inventory data management is defined as an accurate creation and maintenance of item master data, inventory location data and inventory balances per an inventory location. The accuracy of inventory data is dependent of many elements of the product data management like the management of changes during a component’s life-cycle and the accuracy of product configuration in enterprise resource planning systems. Cycle-counting is counting of inventory balances per an inventory location and comparing them to the system data on a daily basis. The Cycle-counting process is a way to measure the accuracy of the inventory data in a company. Through well managed cycle-counting process a company gets a lot of information of their inventory data accuracy. General inaccuracy of the inventory data can’t be fixed through only assigning resources to the cycle-counting but the change requires disciplined following of the defined processes from all parties involved in updating inventory data through a component’s life-cycle. The Processes affecting inventory data are mapped and the appropriate metrics are defined in order to achieve better manageability of the inventory data. The Life-cycles of a single component and of a product are used in evaluation of the processes.

Mitotic regulation by Polo-like kinase 1 and the Chromosomal Passenger Complex

During mitosis, the duplicated genome must be accurately divided between two daughter cells. Polo-like kinase 1 (Plk1) and Aurora B kinase, together with its binding partners Incenp, Survivin and Borealin (chromosomal passenger complex, CPC), have key roles in coordinating mitotic events. The accuracy of cell division is safeguarded by a signaling cascade termed the mitotic spindle checkpoint (SC), which ensures that chromosomes are not physically separated before correct bipolar attachments have been formed between kinetochores and spindle microtubules (MT). An inhibitory “wait anaphase” signal, which delays chromosome separation (anaphase onset), is created at individual kinetochores and broadcasted throughout the cell in response to lack of kinetochore-microtubule (kMT) attachment or proper interkinetochore tension. It is believed that the fast turnover of SC molecules at kinetochores contributes to the cell’s ability to produce this signal and enables rapid responses to changing cellular conditions. Kinetochores that lack MT attachment and tension express a certain phosphoepitope called the 3F3/2 phosphoepitope, which has been linked to SC signaling. In the experimental part, we investigated the regulation of the 3F3/2 phosphoepitope, analyzed whether CPC molecules turn over at centromeres, and dissected the mitotic roles of the CPC using a microinjection technique that allowed precise temporal control over its function. We found that the kinetochore 3F3/2 phosphoepitope is created by Plk1, and that CPC proteins exhibit constant exchange at centromeres. Moreover, we found that CPC function is necessary in the regulation of chromatid movements and spindle morphology in anaphase. In summary, we identified new functions of key mitotic regulators Plk1 and CPC, and provided insighs into the coordination of mitotic events.

Kattilalaitosten järjestelmällinen suunnittelu ja modulaarinen rakenne

Tämän diplomityön tavoitteena on tutkia kattilalaitosten järjestelmällistä suunnittelua, huomioiden laitoksen elinkaariprosessit ja modulaarinen tuoterakenne. Kattilalaitokset investointituotteina toteutetaan tyypillisesti projektitoimintamallilla, jolloin jokainen toimitus suunnitellaan alusta kyseisen kohteen vaatimusten perusteella. Päätöksenteon peruste on laitosasiakkaiden osalta tyypillisesti hinta, jonkavuoksi laitoksen perusratkaisut tulee olla ennalta määriteltyjä ja toimitusprosessi huolellisesti suunniteltu, jotta kustannukset ja aikataulu ovat ennustettavissa. Projektitoimituksissa projektipäälliköllä on merkittävä vastuu myös suunnittelun onnistumisesta ja käytössä olevat projektinhallintamallit ovat hyvin tuotekeskeisiä, jolloin vaatimuksia ei riittävästi huomioida ja siten toteutettu laitosratkaisu ei täytä usein sidosryhmien asettamia vaatimuksia. Monimutkaisten järjestelmien kehittämiseen ja suunnitteluun on olemassa Systems Engineering - suunnittelumalli, jonka hyödyntäminen energiatekniikan alalla on ollut vielä vähäistä. Malli tarjoaa yhdessä ISO/ICE 15288 standardin kanssa valmiit prosessit tuotteen järjestelmälliselle suunnittelulle. Modulaariset tuoterakenteet ovat olleet perusvaatimus komponenttien toimitusten osalta, mutta laitosjärjestelmien tuotteistaminen on koettu vaikeaksi runsaan räätälöintitarpeen takia. Prosessimaisella toimintamallilla voidaan tuottaa modulaarisia tuoterakenteita ja tehostaa kattilalaitosten muutosten hallintaa. Tutkimuksessa tunnistettiin tyypilliset kattilalaitoksen suunnittelun prosessit kattilalaitosten kokonaistoimituksiin erikoistuneelle KPA Unicon Oy:lle.

Defining a framework model to determine total costs of managed desktops using ITIL best practices

In modern day organizations there are an increasing number of IT devices such as computers, mobile phones and printers. These devices can be located and maintained by using specialized IT management applications. Costs related to a single device accumulate from various sources and are normally categorized as direct costs like hardware costs and indirect costs such as labor costs. These costs can be saved in a configuration management database and presented to users using web based development tools such as ASP.NET. The overall costs of IT devices during their lifecycle can be ten times higher than the actual purchase price of the product and ability to define and reduce these costs can save organizations noticeable amount of money. This Master’s Thesis introduces the research field of IT management and defines a custom framework model based on Information Technology Infrastructure Library (ITIL) best practices which is designed to be implemented as part of an existing IT management application for defining and presenting IT costs.

Tuoteportfolion kehittäminen ja uusien asiakassegmenttien etsintä

Tämän tutkimuksen tavoite oli kaksijakoinen. Ensimmäisenä tavoitteena oli profiililiiketoiminnan tehostaminen tuoteportfoliota kehittämällä. Toisena ta-voitteena oli etsiä kannattavimpia asiakassegmenttejä. Työn pääajurina nähtiin kilpailukyky, keskeistä oli ymmärtää mistä kilpailukyky syntyy ja mikä on case-organisaation asema markkinoilla. Laajemmin tavoitteena oli päästä eroon teräsmarkkinoiden syklisyydestä ja pelkästään hintoihin perustuvasta liiketoiminnasta. Tutkimuksessa etsittiin case-organisaation ja kilpailijoiden vahvuuksia ja heikkouksia. Kilpailijoiden asema markkinoilla sekä uusien asiakassegmenttien kiinnostavuus selvitettiin kyselytutkimuksen sekä haastattelujen avulla. Kyselytutkimus toteutettiin avoimilla kysymyksillä varustetulla kyselylomakkeella. Vahvuuksien ja heikkouksien tunnistamisen lisäksi oli tärkeää ymmärtää mitä tekijöitä case-organisaation tulee hankkia tulevaisuuden kilpailukyvyn ylläpitämiseksi. Tutkimuksessa tultiin johtopäätökseen, että paras keino vastata markkinoilla vallitsevaa kilpailuun on keskittyä tuoteportfoliossa avoprofiileihin, joiden seinämäpaksuus on yli 8 mm. Lisäksi heräsi tarve pohtia uuden järeän profilointilinjan hankintaa tulevaisuuden kilpailukyvyn ylläpitämiseksi. Potentiaalisimmiksi uusiksi asiakassegmenteiksi nähtiin nosto- ja siirtovälineteollisuus, infrastruktuuri- ja rakennusteollisuus sekä energiateollisuus. Työssä todettiin myös, että tulevaisuuden kilpailukyvyn ylläpitämiseksi on tuotetarjontaa monipuolistettava lisäämällä oheispalveluita, kuten asiakasvarastointia.

Determinacion de la configuracion E-Z de los acidos Fumarico y Maleico. Un experimento orientado a incentivar el desarrollo de la investigacion cientifica en alumnos de Pregrado

In this work we intend to eliminate the idea that laboratory exercises seem like cookbooks. That is, exercises shall be presented as a problematic situation. Based on observation and experimentation, the students should determine the E-Z configuration of maleic and fumaric acids. The basis of this laboratory exercise is the acid-catalyzed isomerization of maleic acid to fumaric acid. Students are given the starting material, reagents and the experimental procedure. They are told that the starting material is a dicarboxylic acid containing a C=C double bond of formula C4H4O4. Students determine melting points, solubilities, acidity and chromatographic patterns for both the starting material and the product, so that a configuration of each acid can be proposed. This type of experiment yields excellent results, because the students are left to deduce that maleic acid is less stable than fumaric acid. Additionally, they conclude that maleic acid is the "Z" isomer and fumaric acid is the "E" isomer. Finally, this laboratory exercise allows the students to develop simultaneously their critical-thinking skills with the respective laboratory techniques and not to see chemistry as recipes to be followed.

Offering planning process development: Bridging the Offering Gaps and Consolidating Top Priority Needs in Product Offering

The aim of this Thesis is to study how to manage the front-end of the offering planning process. This includes actual process development and methods to gather and analyze information to achieve the best outcome in customer oriented product offering. Study is carried out in two parts: theoretical part and company related part. Theoretical framework is created introducing different types of approaches to manage product planning processes. Products are seen as platforms and they are broken down to subsystems to show different parts of the development. With the help of the matrix-based approaches product platform related information is gathered and analyzed. In this kind of analysis business/market drivers and cus-tomer/competitor information are connected with product subsystems. This gives possibilities to study product gaps/needs and possible future ideas/scenarios in different customer segments. Company related part consists of offering planning process development in real company environment. Process formation includes documents and tools that guide planning from the information gathering to the prioritization and decision making.

Assessment of an information product project success: case business blueprint

The objective of this study was to find out how project success can be measured in a case where the output of a project is an intangible information product, what kind of framework can be used to evaluate the project success, and how the project assessment can be done in practice. As a case example, the success of a business blueprint project was assessed from the product point of view. A framework for assessing business blueprint project success was made based on a literature review. Furthermore, separate frameworks for measuring information product quality and project costs were developed. The theory of business blueprinting was discovered not to be firmly institutionalized and it is briefly covered in the thesis. The possible net benefits from the strategic business process harmonization were noted to be much more significant than the costs of the business blueprint project. The project was seen as a sufficient success from the viewpoint of the created output.