Fosfomycin plus β-Lactams as Synergistic Bactericidal Combinations for Experimental Endocarditis Due to Methicillin-Resistant and Glycopeptide-Intermediate Staphylococcus aureus.

The urgent need of effective therapies for methicillin-resistant Staphylococcus aureus (MRSA) infective endocarditis (IE) is a cause of concern. We aimed to ascertain the in vitro and in vivo activity of the older antibiotic fosfomycin combined with different beta-lactams against MRSA and glycopeptide-intermediate-resistant S. aureus (GISA) strains. Time-kill tests with 10 isolates showed that fosfomycin plus imipenem (FOF+IPM) was the most active evaluated combination. In an aortic valve IE model with two strains (MRSA-277H and GISA-ATCC 700788), the following intravenous regimens were compared: fosfomycin (2 g every 8 h [q8h]) plus imipenem (1 g q6h) or ceftriaxone (2 g q12h) (FOF+CRO) and vancomycin at a standard dose (VAN-SD) (1 g q12h) and a high dose (VAN-HD) (1 g q6h). Whereas a significant reduction of MRSA-227H load in the vegetations (veg) was observed with FOF+IPM compared with VAN-SD (0 [interquartile range [IQR], 0 to 1] versus 2 [IQR, 0 to 5.1] log CFU/g veg; P = 0.01), no statistical differences were found with VAN-HD. In addition, FOF+IPM sterilized more vegetations than VAN-SD (11/15 [73%] versus 5/16 [31%]; P = 0.02). The GISA-ATCC 700788 load in the vegetations was significantly lower after FOF+IPM or FOF+CRO treatment than with VAN-SD (2 [IQR, 0 to 2] and 0 [IQR, 0 to 2] versus 6.5 [IQR, 2 to 6.9] log CFU/g veg; P < 0.01). The number of sterilized vegetations after treatment with FOF+CRO was higher than after treatment with VAN-SD or VAN-HD (8/15 [53%] versus 4/20 [20%] or 4/20 [20%]; P = 0.03). To assess the effect of FOF+IPM on penicillin binding protein (PBP) synthesis, molecular studies were performed, with results showing that FOF+IPM treatment significantly decreased PBP1, PBP2 (but not PBP2a), and PBP3 synthesis. These results allow clinicians to consider the use of FOF+IPM or FOF+CRO to treat MRSA or GISA IE.

PEC1/AtABCG32 transport function in cuticle biosynthesis

Most aerial parts of the plants are covered by a hydrophobic coating called cuticle. The cuticle is formed of cutin, a complex mixture of esterified fatty acids that are embedded and associated with waxes. The cuticle often appears as a superposition of layers of different composition: The cuticle proper formed of cutin and a mixture of waxes and underneath, the cuticle layer containing cutin, intracuticular waxes and polysaccharides of the cell wall. In addition to its involvement in plant development by preventing organ fusions, the cuticle acts as a barrier to prevent water loss and protect plants against environmental aggressions such as excessive radiation or pathogens attacks. PEC1/AtABCG32 is an ABC transporter from the PDR family involved in cutin biosynthesis. Characterization of the peci mutant in Arabidopsis thaliana showed that PEC1 plays a significant role in the diffusion barrier formation in leaves and petals. The cuticles of leaves and flowers of peci are permeable and the cuticular layer rather than the cuticular proper was altered in the petals, underlining the importance of this particular layer in the maintenance of the diffusion barrier. Chemical analysis on the flower cutin monomer composition of ped mutant revealed a decrease in hydroxylated cutin monomers, suggesting a function of PEC1 in the incorporation of these monomers in the polymer cutin. However, the exact nature of the substrates of PEC1 remained elusive. PEC1 homologues in barley and rice, respectively HvABCG31/EIBI1 and OsABCG31, are also implicated in cuticle biosynthesis. Interestingly, the rice mutant displays more severe phenotypes such as dwarfism and spreading necrosis conducting to the seedling death. In this work, we further characterized osabcg31 mutant and hairpin-RNAi downregulated OsABCG31 plant lines showing reduced growth and cuticle permeability. Our analysis showed a decrease in hydroxylated cutin monomers and severe disruptions in the cuticle, which explain the permeability. Further insights into the function of the cuticle in rice resistance/susceptibility to Pathogens were obtained after inoculation with Magnaporthe oryzae, the fungus responsible for the rice blast disease. Osabcg31 as well as the transgenic lines downregulating OsABCG31 showed increased resistance to the fungus. However, only later steps of infection are reduced . and no impact is obseived on the germination or penetration stages, suggesting that the cuticle disruption per se is not responsible for the resistance. We further investigated the cause of the resistance by analyzing the expression of defense related gene in osabcg31 prior to infection. We found that osabcg31 constitutively express defense related genes, which may explain the resistance, the dwarfism and the cell death. osabcg31 is thus a tool to study the connection between cuticle, plant development and defense signaling networks in rice. The transport function of PEC1 family members is still unknown. In order to link cutin biosynthesis and transport activity, we combined ped mutation with mutations in cutin synthesis related genes. Here, we show that PEC1 acts independently from GPAT4 and GPAT8 pathway and partially overlaps with GPAT6 biosynthesis pathway that leads to the production of hydroxylated C16 cutin precursor 2-Mono(10,16-dihydroxyhexadecanoylJglycerol (2-MHG). In addition, we noticed that despite a comparable cutin monomer composition, ped mutant leaves cuticle are permeable while that of gpat6 mutant are not. This finding raises the possibility of PEC1 being required for the incorporation of C16 hydroxylated monomers and their structural arrangement rather than their direct transport towards the cuticle. A careful investigation of the cuticle permeability, cutin composition and ultrastructure during leave development in Wt plants and ped mutants revealed a possible different regulation of several pathways of cutin biosynthesis and showed the importance of PEC1 function early during leave cuticle maturation. In order to elucidate the transport activity of PEC1, we successfully expressed PEC1 in Nicotiana benthamiana plant system for direct transport experiments. This system will be used to test the PEC 1-dependent transport of potential substrates such as sn-2-monoacylglycerol loaded with a hydroxylated C16 fatty acid. -- Toutes les parties aériennes des plantes sont recouvertes d'une couche hydrophobe appelée «cuticule». Cette cuticule est composée de cutine, un polymère d'acides gras estérifiés, et de cires. La cuticule apparaît souvent sous forme de couches superposées: une première couche extérieure appelée «cuticle proper» formée de cutine et d'un mélange de cires, et une deuxième couche, la «cuticle layer», formée de cutine associée à des cires intracuticulaires et des polysaccharides pariétaux. La cuticule joue le rôle de barrière prévenant contre la perte d'eau et les agressions environnementales. AtABCG32/PEC1 est un transporteur ABC de la famille des PDR impliqué dans la synthèse de la cutine. L'étude du mutant peci d'Arabidopsis thaliana a révélé une fonction de PEC1 dans la formation de la barrière de diffusion. La cuticule des feuilles et fleurs de peci est perméable. Des altérations de la «cuticle layer» ont été démontrées, soulignant son importance dans le maintien de la barrière. L'analyse de la composition de la cutine de peci a montré une réduction spécifique en monomères hydroxylés, suggérant un rôle de PEC1 dans leur incorporation dans la cuticule. Cependant, la nature exacte des substrats de PEC1 n'a pas été identifiée. PEC1 possède deux homologues chez l'orge et le riz, respectivement HvABCG31 et OsABCG31, et qui sont impliqués dans la biosynthèse de la cuticule. Chez le riz, des phénotypes plus sévères ont été observés tels que nanisme et nécroses conduisant à la mort des jeunes plants. Dans cette étude, nous avons continué la caractérisation de osabcg31 ainsi que des lignées de riz sous exprimant le gène OsABCG31 et présentant une cuticule perméable tout en ayant une meilleure croissance. Notre étude a démontré une réduction des monomères hydroxylés de cutine et une désorganisation de la structure de la cuticule, aggravée dans le mutant osabcg31. Ce résultat explique la perméabilité observée. Des mformations P|us approfondies sur l'implication de la cuticule dans la résistance aux pathogènes ont été obtenues après inoculation du mutant osabcg31 et les lignées sous- exprimant OsABCG31 avec une souche virulente de Magnaporthe Oryzae, le champignon responsable de la pyriculariose du riz. Les différentes lignées testées ont démontré une résistance au pathogène. Cependant, seules les étapes tardives de l'infection sont réduites et aucun impact n'est observé sur la germination des spores ou la pénétration du champignon, suggérant que les modifications de la cuticule ne sont pas directement à l'origine de la résistance. L'analyse de l'expression de gènes impliqués dans la résistance à Magnaporthe.oryzae a mis en évidence l'expression constitutive de ces gènes en l'absence de tout contact avec le pathogène. Ceci explique la résistance, le nanisme et la mort cellulaire observés. Ainsi, osabcg31 représente un outil efficace pour l'étude intégrée des systèmes de régulation de la défense, de développement des plantes et la cuticule. La nature des substrats transportés par PEC1/AtABCG32 reste inconnue. Dans le but d'établir une liaison entre biosynthèse de cutine et transport des précurseurs par PEC1, la mutation peci a été combinée avec des mutants impliqués dans différentes voies de biosynthèse. Cette étude a démontré une fonction indépendante de PEC1 de la voie de biosynthèse impliquant les enzymes GPAT4 et GPAT8, et une fonction partiellement indépendante de la voie impliquant GPAT6 qui mène à la production de précurseurs sn-2- monoacylglycerol chargés en acides gras en C16 (2-MHG). De plus, malgré un profil similaire en monomères de cutine, gpat6 conserve une cuticule imperméable alors que celle de PEC1 est perméable. Ceci suggère que PEC1 est nécessaire à l'incorporation des monomères en C16 et leur arrangement structurel plutôt que simplement à leur transport direct. L'étude approfondie de la perméabilité cuticulaire, de la structure ainsi que de la composition en cutine pendant le développement des feuilles de peci et la plante sauvage a révélé l'existence de différentes régulations des voies de biosynthèses des monomères et a démontré l'importance de PEC1 dans les premières étapes de la mise en place de la cuticule. Pour identifier les substrats transportés, l'expression de PEC1 chez le système hétérologue Nicotiana benthamiana a été conduite avec succès. Ce système sera utilisé pour tester le transport de substrats potentiels tels que le sn-2-monoacylglycerol chargé en acide gras en C16.

Tropheryma whipplei tricuspid endocarditis: a case report and review of the literature.

INTRODUCTION: The main clinical manifestations of Whipple's disease are weight loss, arthropathy, diarrhea and abdominal pain. Cardiac involvement is frequently described. However, endocarditis is rare and is not usually the initial presentation of the disease. To the best of our knowledge, this is the first reported case of a patient with Tropheryma whipplei tricuspid endocarditis without any other valve involved and not presenting signs of arthralgia and abdominal involvement. CASE PRESENTATION: We report a case of a 50-year-old Caucasian man with tricuspid endocarditis caused by Tropheryma whipplei, showing signs of severe shock and an absence of other more classic clinical signs of Whipple's disease, such as arthralgia, abdominal pain and diarrhea. Tropheryma whipplei was documented by polymerase chain reaction of the blood and pleural fluid. The infection was treated with a combined treatment of doxycycline, hydroxychloroquine and sulfamethoxazole-trimethoprim for one year. CONCLUSION: Tropheryma whipplei infectious endocarditis should always be considered when facing a blood-culture negative endocarditis particularly in right-sided valves. Although not standardized yet, treatment of Tropheryma whipplei endocarditis should probably include a bactericidal antibiotic (such as doxycycline) and should be given over a prolonged period of time (a minimum of one year).

Etude de l'évolution des patients porteurs d'une cardiomyopathie hypertrophique obstructive (CMHO) après alcoolisation septale

La cardiomyopathie hypertrophique (CMH) est la maladie cardiaque monogénique la plus fréquente, touchant environ 1 individu sur 500 dans la population (1,2). L'étiologie est familiale dans la majorité des cas avec une transmission de type autosomal dominant à pénétrance variable. Deux gènes principaux sont à l'origine de la maladie chez 70% des patients avec un test génétique positif. Il s'agit des gènes qui codent pour la chaine lourde β de la myosine (MYH7) et la protéine C liant la myosine (MYBPC3) (1-3). La CMH est définie par la présence d'une hypertrophie myocardique « inadéquate » car se développant en l'absence d'une cause d'augmentation de la post-charge (HTA, sténose aortique, membrane sous-aortique), d'une pathologie infiltrative ou d'un entrainement physique (4,5). Le plus souvent asymétrique et affectant préférentiellement le septum, cette hypertrophie s'accompagne dans près de deux tiers des cas d'une obstruction dynamique sous-aortique de la chambre de chasse du ventricule gauche par la valve mitrale (systolic anterior motion ou SAM). Cette obstruction est à la fois la conséquence du rétrécissement de la chambre de chasse par l'hypertrophie septale mais également d'un malpositionnement de la valve mitrale (6-8). On parle alors de Cardiomyopathie Hypertrophique et Obstructive (CMHO). L'obstruction - présente au repos dans 50% des cas et uniquement après manoeuvres de provocation dans l'autre moitié des cas (manoeuvre de Valsalva, test de vasodilatation par nitrite d'amyle) est à l'origine d'un gradient de pression entre le ventricule gauche et l'aorte, et donc d'une surcharge de pression pour le ventricule gauche. Cette surcharge de pression est à l'origine des symptômes classiquement rencontrés soit dyspnée et angor d'effort, présyncope voire syncopes à l'effort. Un gradient sous-aortique de plus de 50 mmHg (mesuré au repos ou après provocation) est considéré comme un gradient à valeur pronostique (6-8) et justifiant un traitement si associé à des symptômes. Le traitement médical des formes obstructives repose sur l'administration de substances inotropes négatives et/ou susceptibles de favoriser la relaxation myocardique tels que les béta-bloqueurs, les antagonistes du calcium et le disopyramide - pris isolément ou en association. Pour les nombreux patients qui deviennent réfractaires ou intolérants à ces traitements, deux interventions peuvent leur être proposées pour lever l'obstruction : une myotomie-myectomie chirurgicale du septum (9,10) ou une alcoolisation du septum par voie percutanée (7,8). Les indications à ces interventions sont les suivantes (7,8,11) : 1. Symptômes (dyspnée de classe fonctionnelle NYHA III ou IV, angor de classe fonctionnelle CCS III ou IV, syncope, ou présyncope) réfractaires au traitement médical ou intolérance du patient au traitement. Une dyspnée de classe II est considérée suffisante dans le cas de jeunes patients. 2. Obstruction sous-aortique avec gradient supérieur ou égal à 50 mmHg, au repos ou après manoeuvre de provocation, associée à une hypertrophie septale et à un mouvement systolique antérieur de la valve mitrale (effet SAM) 3. Anatomiecardiaquefavorableàuntraitementinvasif(épaisseurduseptumde plus de 16 mm) Si la myectomie chirurgicale reste la méthode de référence (12-18), l'alcoolisation septale du myocarde par voie percutanée est devenue un des traitements de choix dans la thérapie de la Cardiomyopathie Hypertrophique Obstructive réfractaire. Elle consiste à repérer par coronarographie l'artère septale nourrissant le septum basal hypertrophié, puis à y introduire un petit ballon pour isoler ce territoire du reste du lit coronaire avant d'y injecter une dose d'alcool à 95% comprise entre 1 et 5 cc. On crée ainsi un infarctus chimique, technique qui fut dans le passé utilisée pour le traitement de certaines tumeurs. Les effets ne sont pas immédiats et nécessitent généralement 2-3 semaines avant de se manifester. On assiste alors à une diminution progressive de l'épaisseur du myocarde nécrosé (7), à la disparition progressive de l'obstruction et à l'amélioration / disparition des symptômes. La question de savoir qui de la chirurgie ou de l'alcoolisation est le plus efficace a été source de nombreux débats (7,11-13,18). Par rapport à la chirurgie, les avantages de la méthode percutanée sont les suivants (11,14,15,18,19) : - Efficacités hémodynamique et fonctionnelle jugées comparable à la chirurgie selon les études - Taux de morbidité et de mortalité très faible et non supérieure à la chirurgie - Absence de sternotomie - Diminution de la durée de l'hospitalisation et surtout de la période de convalescence, le patient pouvant reprendre une activité dès son retour à domicile Certains experts émettent néanmoins des doutes quant à l'innocuité à long terme de la méthode, les zones nécrotiques pouvant servir de terrain arythmogène. Pour ces raisons, la méthode n'est pas recommandée chez les patients de moins de 40 ans (6,8). Le risque majeur de l'alcoolisation du septum proximal réside dans l'induction d'un bloc atrio-ventriculaire complet chimique, le noeud atrio-ventriculaire étant justement situé dans cette région. Ce risque augmente avec la quantité d'alcool administrée et nécessite, si persistance après trois jours, l'implantation d'un pacemaker à demeure. Selon les centres, le taux d'implantation d'un stimulateur varie ainsi entre 7% et 20% (7,14,20). L'efficacité clinique et l'incidence des complications est donc en partie liée à la compétence technique et à l'expérience de l'opérateur (7,14), mais aussi aux choix des patients. Il peut donc varier grandement selon les centres médicaux. L'étude proposée vise à analyser les résultats de l'alcoolisation obtenus à Lausanne, jusqu'à présent pas encore été étudiés, et à les comparer à ceux de la littérature.

Utilização de uma interface do tipo "particle beam" para a obtenção de espectros de massas de compostos pouco voláteis em solução

Due to source contamination and wearing of instrument components problems caused by the direct insertion probe technique, a new way of introduction of low volatile compounds into mass spectrometer was tested. This new scheme comprises the introduction of the low volatile compounds solutions via a six port valve connected to a particle beam interface. Solutions of isatin were injected into this system and the best results were obtained with CH2Cl2, CH3OH and CH3CN. The solution inlet system has shown to be advantageous over the conventional way of direct insertion probe introduction.

Automatização de um destilador d'água

A simple and inexpensive device to automate a water distilling apparatus is shown. It is composed by a magnetic floater placed in the water reservoir and a level control unit, which acts over the heating element circuit. In order to provide water saving, an electromagnetic valve is inserted in the water supply inlet. Some suggestions for the adaptation to other types of equipment are also offered.

Injetor multicanal com válvulas de estrangulamento para análise em fluxo

An important component for the automation of flow injection analysis (FIA) systems is the sample injection valve. A simple and inexpensive commutator with 16 pinch valves (8 normally open and 8 closed) was developed and configured as a multichannel injection valve. It is activated by a single solenoid of 3 Kgf, powered by a pulsed driver circuit, controlled by a microcomputer or a switch. FIA with spectrophometric detection of potassium dichromate solution was used for the evaluation of the new injection valve and its comparison with other valves, for sample loops of 50, 100, 200, 300 and 500 muL. The repeatability was favorable (RSD 1.0% for 15 injections at each loop volume) compared to a manual injector, an electropneumatic injector and an injector configured with three mini solenoid valves (RSD 1.1, 1.3 and 1.0%, respectively, for15 injections at each loop volume).

Propulsor pneumático versátil e isento de pulsação para sistemas de análise em fluxo

Aquarium air pumps are proposed and evaluated as pneumatic liquid propulsion devices for flow injection and continuos flow analysis (FIA and CFA) systems. This kind of pump is widely available at a very low cost and it can sustain a pressure around of 4 psi (0.28 bar) indefinitely. By applying this air pressure onto a solution contained in a reservoir flask, it is possible to reach flow rates of up to 12.5 mL min-1 for circuits comprising reactors, made from 0.8 i.d. tubing with a length of 100 cm. The precise adjustment of flow rate below the maximum one can be made with a simplified needle valve or inserting in series a short length of capillary tube. The absence of flow pulsation is a definite advantage in comparison with peristaltic pumps, especially when amperometric detection is elected, as confirmed experimentally in FIA and CF applications.

Nano vitrocerâmica de escória de aciaria

The manufacture of glass-ceramics is an alternative route for the commercial use of metallurgical slags. Such types of glass-ceramics may find commercial applications owing to their low cost, good mechanical properties and superior visual aspect. Besides, due to the elimination of that industrial residue from the environment and also due to the possibility of replacement of natural stones such as marbles and granites, the use of slags is an activity with strong ecological appeal. While the use of blast-furnace slags for the production of glass-ceramics is well known, the utilization of steel making slags constitutes a challenge, because these materials possess low concentration of SiO2. In this work a novel composition for producing glasses and glass-ceramics from a steelmaking slag is presented. The crystal nucleation kinetics, the characterization of the resulting microstructures for two different thermal treatments and mechanical properties of the glass-ceramics are discussed. A glass-ceramic having a marble aspect, fine volumetric crystallization, high degree of crystallization and improved mechanical strength was obtained.

Módulo eletrônico de controle para válvulas solenóides

This technical note describes a new and simple electronic circuit for driving solenoid valves. The circuit is based on a single integrated circuit DRV103, which is able to drive resistive or inductive loads up to 1.5 A. Switching of 12-V loads can be controlled by TTLlevel signals in two distinct steps. Initially, 12 V is applied during 110 ms, followed by 4.2 V RMS until the end of the activation TTL pulse. This mode of operation is particularly suitable to drive solenoids, because it requires a higher voltage to start and a lower maintenance voltage. By using this circuit, power consumption and heating are reduced and the solenoid lifetime is enhanced. Moreover, this circuit is specially appropriated to build computercontrolled solenoid valves systems.

Caracterização e classificação do resíduo sólido "pó do balão", gerado na indústria siderúrgica não integrada a carvão vegetal: estudo de um caso na região de Sete Lagoas/MG

This research was developed by considering that the solid waste produced in the process of pig iron production represents the loss of raw materials and the increase in environmental problem. The charcoal based mini blast-furnace off gases dust named CHARCOK was collected from SIDERPA ¾ Siderúrgica Paulino Ltda, located in Sete Lagoas, Minas Gerais. The Charcok was characterized and classified according to ABNT (Associação Brasileira de Normas Técnicas) standard. The results showed that the Charcok should be classified as Class I Wastes ¾ "Hazard Wastes" because of its high concentration of phenols (54.5mg C6H5OH/kg). The Charcok had high concentration of iron and charcoal which can be used as energy source.

Protection of the high-voltage equipment with reduced insulation strength

Power transformer is the most expensive equipment on a substation. It is always necessary to get needed benefit with the lowest expenses. Producing of power transformers with reduced insulation strength is one of the possible ways to reduce expenses. Exploitation of such transformers was begun in the end of 70-th in the last century. Protection from overvoltages was done with valve-type magnetic combined surge arresters with increased blanking voltage during switching overvoltages. Nowadays there is the necessity of replacement of those devices. That’s why modernized nonlinear surge arrester was invented. This master’s thesis is focused on the use research of that modernized device in comparison with usual nonlinear surge arresters. The goal is to show the lightning overvoltages level using different types of nonlinear surge arresters and then calculations of the lightning protection reliability.

Acoplamento de cela de difusão gasosa a sistema de análise por injeção seqüencial visando a determinação espectrofotométrica de sulfeto

A new configuration for coupling a gas diffusion cell to a sequential injection system is presented. The matrix exchange is made without the need for additional rotary injection valves or peristaltic pumps, keeping the original mechanical components of the sequential injection apparatus: one syringe pump (or peristaltic pump) and one selection valve. The system was tested constructing analytical curves for sulfide exploring the formation of the methylene blue dye. The proposed method has a detection limit of 60 µg L-1 S2-, with a linear dynamic range between 0.10 and 4.0 mg L-1 S2- concentrations, with a sampling frequency of 20 h-1.

Crassostrea patagonica (d'Orbigny, 1842) shell concentrations from the late Miocene Rio Negro province, NE Patagonia, Argentina

The Río Negro Formation (late Miocene-early Pliocene) mainly consists of continental deposits, but it contains a middle member of marine origin. It represents a transgressive-regressive sequence that can be seen at several outcrops along the N Patagonian coast. The taphonomical approach to the El Espigón marine deposits permits the identification of four main layers containing different kinds of skeletal accumulation, which mainly consist of oyster shells [Crassostrea patagonica (D'Orbigny, 1842)]. These concentrations display three different morphologies (pouches, pavements and bouquets) with a different taphonomic signature. These deposits were formed in shallow marine environments influenced by wave activity that produced valve concentrations of different entities. They contain several shell beds that represent event, composite, hiatal to lag skeletal concentrations. Traces of bioturbation in the sediment (Thalassinoides, Teichichnus) and bioerosion on the shells (Entobia, Gastrochaeonolites, Caulostrepsis), and encrusters (cirripeds, bryozoans), are also abundant in the outcrop and consititue common components of these Miocene materials. Layers 1 and 2 of the sequence were deposited in shoreface/foreshore environments at the beginning of a highstand systems tract, while layers 3 and 4 were deposited at the end, or at the beginning of a forced regression, in foreshore environments. A final erosional episode cut the top of the layer 4, which truncated the abundant bioturbaation developed there.

Flow analysis by using solenoid valves for As(III) determination in natural waters by an on-line separation and pre-concentration system coupled to a tungsten coil atomizer

A flow system coupled to a tungsten coil atomizer in an atomic absorption spectrometer (TCA-AAS) was developed for As(III) determination in waters, by extraction with sodium diethyldithiocarbamate (NaDDTC) as complexing agent, and by sorption of the As(III)-DDTC complex in a micro-column filled with 5 mg C18 reversed phase (10 µL dry sorbent), followed by elution with ethanol. A complete pre-concentration/elution cycle took 208 s, with 30 s sample load time (1.7 mL) and 4 s elution time (71 µL). The interface and software for the synchronous control of two peristaltic pumps (RUN/ STOP), an autosampler arm, seven solenoid valves, one injection valve, the electrothermal atomizer and the spectrometer Read function were constructed. The system was characterized and validated by analytical recovery studies performed both in synthetic solutions and in natural waters. Using a 30 s pre-concentration period, the working curve was linear between 0.25 and 6.0 µg L-1 (r = 0.9976), the retention efficiency was 94±1% (6.0 µg L-1), and the pre-concentration coefficient was 28.9. The characteristic mass was 58 pg, the mean repeatability (expressed as the variation coefficient) was 3.4% (n=5), the detection limit was 0.058 µg L-1 (4.1 pg in 71 µL of eluate injected into the coil), and the mean analytical recovery in natural waters was 92.6 ± 9.5 % (n=15). The procedure is simple, economic, less prone to sample loss and contamination and the useful lifetime of the micro-column was between 200-300 pre-concentration cycles.