PLANEJAMENTO ESTRATÉGICO: UM ESTUDO EXPLORATÓRIO SOBRE SUAS ETAPAS E UTILIZAÇÃO NAS MICRO, PEQUENAS E MÉDIAS EMPRESAS TRANSPORTADORAS DE CARGAS RODOVIÁRIAS DO GRANDE ABC

Através de uma pesquisa de 1990 até 2004, a (JUCESP) - Junta Comercial do Estado de São Paulo - registrou mais de 2,1 milhões de novas empresas e encerrou o registro de 1,3 milhões. Isso significa extinção de aproximadamente 281 mil empregos diretos e a retirada da economia de 15,6 bilhões de reais de faturamento e capital investidos. As pequenas e médias empresas são fundamentais para absorção dos impactos causados pela volatilidade da economia, na mesma proporção que vulneráveis a essas oscilações. Devido sua importância econômica, a qual é verificada através dos números apresentados pelos órgãos responsáveis pela divulgação do controle e índices econômicos, como o (IBGE) - Instituto Brasileiro de Geografia e Estatística - (BNDES) Banco Nacional de Desenvolvimento Econômico e Social, (SEBRAE) Serviço Brasileiro de Apoio às Micro e Pequenas Empresas e Ministérios do Trabalho e do Desenvolvimento Social, esse trabalho tem como proposta verificar se no desenvolvimento de seus processos gerenciais, as transportadoras de cargas do Grande ABC, contemplam o planejamento estratégico e quais as etapas mais utilizadas. Para coleta de dados foram enviados 150 questionários direcionados aos executivos e proprietários das transportadoras de cargas do ABC. Foram respondidos através de e-mails 14 questionários. Como o número de respondentes era muito pequeno, foram realizados alguns contatos diretamente com os proprietários, visando o agendamento de entrevistas.

A COMUNICAÇÃO COMO UM PROCESSO DE INTELIGÊNCIA EMPRESARIAL EM PLANEJAMENTO ESTRATÉGICO

Esta tese trata da comunicação como instrumento de inteligência empresarial numa instituição de ensino superior. Ela pretende demonstrar que a comunicação agrega vantagem competitiva às organizações que atuam no mercado educacional. O presente trabalho se fundamenta em referenciais teóricos das ciências da Comunicação e de Planejamento Estratégico, e seus procedimentos metodológicos incluem, além de revisão bibliográfica extensiva e análise de documentos, a técnica da observação participante, com o acompanhamento das atividades do grupo de trabalho intitulado Comunicação e Integração entre os anos 2003 e 2005, que integrava o Planejamento Estratégico da UMESP Universidade Metodista de São Paulo. Ao final do trabalho, buscou-se mapear as condições necessárias para que a comunicação se constitua efetivamente num processo de inteligência empresarial, incorporando-se à gestão estratégica das organizações. Admitimos que a Comunicação Empresarial ainda tem de vencer alguns desafios e que eles, necessariamente, não são fáceis de serem superados. É necessário considerar sempre que a Comunicação Empresarial não flui no vazio, não se realiza à margem das organizações, mas está umbilicalmente associada a um particular sistema de gestão, a uma específica cultura organizacional e que é expressão, portanto, de uma realidade concreta. Para que a Comunicação Empresarial seja assumida como estratégica, essa condição deverá ser favorecida pela gestão, pela cultura e mesmo pela alocação adequada de recursos (humanos, tecnológicos e financeiros), pois sem os quais ela não se realiza. Logo, se estes pressupostos não estiverem devidamente satisfeitos, será prematuro concluir pelo caráter estratégico da Comunicação Empresarial. Mais ainda: a comunicação não será estratégica em função unicamente do trabalho mais ou menos competente dos profissionais de comunicação. Há exigências outras que, infelizmente, fogem ao seu controle. Em resumo, nesse trabalho são analisadas três questões centrais. A primeira delas diz respeito ao conceito de estratégia. A segunda refere-se ao chamado ethos organizacional em que se insere a prática comunicacional. Finalmente, são examinadas as condições básicas para que a comunicação estratégica realmente prevaleça.

O PLANEJAMENTO EDUCACIONAL E A CONSTRUÇÃO TEÓRICO-PRÁTICA DA AUTONOMIA DO EDUCADOR

Trata-se de uma pesquisa de mestrado que tem por objetivo discutir os processos de planejamento educacional e de formação continuada do professor de Ensino Médio, envolvendo aspectos do trabalho coletivo dos educadores/professores, o momento do registro, os saberes docentes e do coordenador pedagógico e a construção da autonomia docente. O trabalho visa responder às seguintes questões: por que é tão difícil que o trabalho de planejamento, a troca de experiência, o estudo conjunto aconteçam na escola, mesmo quando são destinadas horas remuneradas para esses fins? Por que as horas destinadas ao planejamento, à troca de experiências, à avaliação do trabalho pedagógico e à formação continuada não são bem aproveitadas na escola? Muitos governos estaduais e municipais e mesmo muitos mantenedores de instituições privadas, geralmente "enfiam goela abaixo" dos educadores os seus projetos, não solicitando dos mesmos a contribuição, e o que é mais importante, o envolvimento no processo de elaboração. Os professores, ao resistirem aos processos de planejamento, estão reagindo a essa forma autoritária de desencadear políticas? Se não, que razões levam o professor a rejeitar mudanças em sua prática? Quais questionamentos fazem os professores em torno do planejamento/plano? A dissertação tem como objetivo geral analisar as respostas apresentadas da sondagem exploratória realizada no início da pesquisa, com quatro professores de uma mesma escola de Ensino Médio da rede particular, e relacioná-las aos estudos bibliográficos apresentados a partir de diversos autores estudiosos no assunto. Pretende, ainda, enfocar o "como" os professores poderiam utilizar melhor o processo do trabalho coletivo para um movimento reflexivo do ato de educar; o "quanto" as horas previstas e remuneradas poderiam contribuir para as discussões sobre o processo ensino-aprendizagem-avaliação. Como procedimento metodológico, além da entrevista inicial, foi realizado um estudo bibliográfico sobre a importância da palavra a partir dos estudos de Freud e, em seguida, da abordagem multirrefrencial por permitir um olhar plural e mais humano sobre os processos educacionais. Foram apresentados estudos sobre os conceitos atribuídos às políticas de planejamento curricular: o planejamento e o plano de ensino - práticas construídas no cotidiano. Como resultados, mesmo que provisórios, apontamos para: o trabalho coletivo no espaço organizado e garantido pelos gestores da escola; a valorização da memória e autoria docente, para a reflexão de práticas, a visibilidade do trabalho e o resultado pedagógico. O trabalho ainda considera a importância da formação contínua, planejada em momentos remunerados e garantidos pela instituição, a importância da construção dos saberes, docentes e do coordenador pedagógico e a historicidade das práticas de registro dos planos como aspectos inerentes a um projeto pedagógico e que devem ser reconhecidos, valorizados e estimulados pelas políticas institucionais.(AU)

CORRELAÇÕES ENTRE PERCEPÇÃO DA PASSAGEM DO TEMPO, ATENÇÃO DIFUSA E ANSIEDADE

O presente estudo teve como objetivo avaliar aspectos psicofisiológicos da ansiedade em particular a atenção e a percepção da passagem do tempo. Foi aplicada a escala psicométrica de ansiedade do IDATE em 180 alunos do curso de Educação Física da Universidade de São Paulo em sala de aula. Foram selecionados 15 voluntários mais ansiosos e 15 menos ansiosos foi considerado o IDATE traço por apresentar características mais constantes da ansiedade. O experimento 1 foi a tarefa de Tempo Espontâneo onde os participantes deviam bater o dedo no botão A do joystick da forma mais regular e precisa possível por um minuto. Já no experimento 2 os participantes foram orientados a responder o mais rápido possível ao surgimento do estimulo (ponto branco 0,4 grau) com uma luminância de 80 cd/m contra um fundo cinza pressionando o botão A do joystick com qualquer dedo da mão dominante (TRS). Os estímulos eram apresentados randomicamente por 82 posições diferentes na tela do computador. Após tratamento dos dados e analise estatística, o estudo de caráter geral e exploratório apresentado aqui mostra tendências, mas não correlações significativas entre as medidas. Alguns dados, no entanto, chamam a atenção e devem ser considerados no planejamento de experimentos futuros.

Aplicação do Na2S2O8, H2O2 e ferro na remediação de solos (latossolo e areia destrófica) contaminados com diesel

Environmental liabilities from accidents in the retail petroleum industry, especially in urban areas, have represented a serious problem whose impact reaches the underground, people's health and even economic losses with the remediation process. In U.S.A. are estimated hundreds of billions of dollars invested in soil remediation processes. The results of the reports and investigative reports of liabilities in fuel stations distributed in the urban area of Natal-RN were used to estimate the local scenario of contamination. This database has been possible to determine the main contaminants (BTEX, PAHs, TOC), affected neighborhoods and types of potentially more impacted soils. Experiments were carried out in order to reverse contamination of this scenario, where the soil type was a factor in the planning, because it influences directly on the effectiveness of remediation techniques studied: Oxidation by hydrogen peroxide and oxidation by sodium persulphate. These oxidants are activated forming free radicals (HO•-, SO4 •-, HO2 • , O2 •-, S2O8 -2, etc) responsible for to mineralize the hydrocarbons and other organic compounds (releasing O2 e CO2). In the activation process, the ferrous ions (II) and ferric (III) were studied as well as hydrogen peroxide activation technique with sodium persulfate, the latter being presented the best efficiency among all the study, when activated with Fe+3. In addition to defining the most efficient technique, the aim of this study was to evaluate the influence of different soils among oxidative techniques, characterizing the effect of the concentration of these oxidants and also the concentration of the catalysts. Exists in most scenarios evaluated the presence of intrinsic total iron soil matrix. The so-called latosols present microaggregates reddish indicating the presence of these reactive species like iron and clayey aspect. The kinetic study was conducted by experimental design and monitoring of the percentage of total carbon (SSM-5000A) in the solid and liquid phases, knowing that 82.4% of the diesel molecule is carbon. Yet organic carbon and pH of liquid samples were analyzed for technical, characterizing the influence of soil type and its operating condition. The Fenton-like technique H2O2 e Fe+2 presented satisfactory oxidation, including sandy soil, but well below the best result. The sodium persulphate only activated with temperature, even in the most favorable soil, did not provide good efficiency. The best technique in the study had the concentration profile with 2,2x10- 1mol.L-1 of Na2S2O8 activated with 6,53x10-1mol.L-1 of H2O2 and 2,5x10-2 Fe3+mol.L-1 which reduced in less than a day 96 contamination in red soil, initially with 66,667 mg of diesel per kg of clean soil

Princípios da construção enxuta no processo de planejamento de uma construtora de grande porte de Natal (RN)

Considered as one of the oldest activities done by men, the civil construction represents one of the most important sectors for the economic growth of a country, in spite of the low results of growth in the past few years and also in the current year. To make this industry grow, even with an unfavourable economic scenario, it is necessary to implement an effective planning in its activities. This is one of the most important concepts brought by the Lean Construction philosophy, which had its origin through the adaptation of the concepts established by the Toyota Production System (TPS) or Lean Production. By having as a scenario the city of Natal\RN, the main goal of this dissertation consists in investigating how the 11 principles of the lean construction influenced the schedule of a construction field that started to implement its lean concepts. As a methodology, it was used the case study of a big enterprise located in Natal (RN). During the execution of the method, documents related to the short-term, midterm and long-term planning were analysed , aiming to describe its planning process; it was also described the factors that caused the delays at the enterprises’ field ;in addition, a comparison was made between the results obtained at the case study and the ones presented at the literature; in the end, the actions were listed by the company, which had the purpose to solve the main causes of delays, verifying if they were linked to the lean construction principles. This research finds its reason of existence in the relevance of its theme at the nowadays reality of the construction industry, since the principles of the lean construction uphold the reduction of processes that are useless, diminishing wastes as well as costs in construction. The relevance is perceived for the academy, in terms of the possibility to discuss if the concepts established by the lean production are being adapted to the civil construction sector and how this adaptation is influencing at the buildings planning project. Economic importance, because with the reduction of the wastes and costs, the companies may reduce the building´s value into a more accessible value, even with the sector´s lower growth. And social significance, because lean construction gives a better participation of the labour at the planning activity. Among the main results, the high frequency of planning errors stands out, mainly the programming deviations and not the task programming, as well as the execution errors, low productivity and activities executed by the workers. Amongst the 11 principles of lean construction, only five were related with the 12 actions analysed by the author. From the 12 actions, four were completely cohesive to one or more from these five principles. Some improvement proposals were also highlighted and established by the research.

Unidades geoambientais e áreas de preservação permanente como instrumentos de auxílio para o planejamento ambiental - o caso da via costeira de Natal-RN

Brazilian law provides a series of rules and policies which regulate space use and occupancy as well as guide environmental planning. Among those are the Permanent Preservation Areas (PPAs) which purpose is to ensure the preservation of elements that are essential to maintain the environmental function and landscape. Another important instrument identifier of spaces are geoenvironmental units, which are synthesis elements grouping areas of similar characteristics and can be used for the analysis of risk, fragility and potential use of spaces. The geoenvironmental units are defined by more complex processes (information integration), focusing not only on individual elements, but being determined from a systemic analysis. Is It possible to identify and delineate APPs from the identification and determination of geoenvironmental units? The aim of this study was to evaluate the potential of geoenvironmental units in the process of identification and delineation of APPs a see how much of the study area, the area by the Coast line in Natal/RN, is still good for occupation. It was used the physiognomic method, in which the limits of the units are plotted on a synthetic document (aerial photographs), valuing aspects of relief in a range of detail by the analysis of systemic categories (element, structure, function and interaction), observed. The methodology used allowed the identification and delineation of eleven geoenvironmental units and, from these, it was possible to identify and delineate four out of the five PPAs occurring in the study area. Only a small space of 1.2 ha of the study area is not considered APP by law. Thus, the occupation of the unoccupied area by the Coast line is not feasible from a legal standpoint. The geoenvironmental units as well as the identified and delineated APPs in the area by the Coast line are spaces which preservation is guaranteed by law in various scopes and are necessary to maintain the environmental functions of the area. The planning for the use and occupation of the area should involve the recovery of degraded areas and the creation of elements that make possible the use as well as attract the community, as provided in the initial planning, by ensuring the public utility and social interest in the Project.

Alquilação de tolueno com propeno, através de complexo ferro (II) ᵦ- diimina homogêneo e heterogeneizado em MCM-41, Al-MCM-41 e SBA-15

This work describes the synthesis and aplication of homogeneous and heterogenized iron catalysts in the alkylation reaction of toluene with propene, empolying experimental design. The homogenous complex was obtained trough the synthesis of the organic ligand folowed by the complexation of the iron(II) chloride. As to the heterogenized complexes, first were synthetized the inorganic supports (SBA-15, MCM-41 and Al-MCM-41). Then, it was synthetized the ligand again, that through funcionalization with chloropropyltrimethoxysilane (CPTMS), was anchored on the support previously calcinated. To these anchored ligands, was complexed the iron(II) chloride, previously solubilizated in tetrahydrofuran (THF). The organic ligand characterization was accomplished trough nuclear magnetic resonance (NMR) and Infrared spectroscopy (IV). The supports were characterized with x-ray diffraction (DRX), texture analysis with nitrogen adsorption/desorption (before and after the anchoring), termogravimetric analysis (TG) and infrared (IV). The metalic content was quantified trough the atomic absorption spectrophotometry (AAS). The complexes were tested in catalytic reactions emolying ethylaluminium sesquichloride (EASC) as co-catalyst in steel reactor, under mecanic stirring. The reaction conditions ranged from 4 to 36 ◦C, with many aluminum/iron ratios. The catalysts were actives in homogeneous and heterogenized ways. The homogenous catalytic complex showed a maximum turnover frequency (TOF) of 8.63 ×103 · h −1 , while, in some conditions, the anchored complexes showed better results, with TOF of until 8.08 ×103 · h −1 . Aditionally, it was possible to determine an equation, to the homogenous catalyst, that describes the product quantity in function of reacional temperature and aluminum/iron ratio.

Planejamento e déficit habitacional: estudo de caso a partir do cadúnico com beneficiários do programa bolsa família na zona norte de Natal

This research aims to analyze the housing conditions and socioeconomic of beneficiaries of the Bolsa Família Program – PBF of the North side of Natal city. For that, it is necessary a survey of this region's origins and how its expansion has occurred in the context of local urban development, considering demographic evolution, in particular, from the construction of housing complex and formal and informal allotments. From the field research, consisting of a pilot in loco with some households, it became possible to start the analysis of housing conditions that culminated with a detailed study of the Single Register form of the federal Government (CadÚnico), in relation to 100% (one hundred percent) of the beneficiaries of the Bolsa Familia program (PBF) of Natal city, with qualitative and quantitative information. From this general survey, a cut was done, contemplating only beneficiaries residing in the north of the city. To better understand this reality, the survey found the Brazilian housing deficit, considering its origins, historical contexts and concepts used by the following institutions: João Pinheiro Foundation (FJP), Brazilian Institute of Geography and Statistics (IBGE), Applied Economics Research Institute (IPEA), and Local Plan Housing of Social Interested (PLHIS) and the United Nations Centre for Human Settlements (UN-HABITAT). Furthermore, were compared the various concepts of city and its respective evolution, considering the importance of planning as an instrument of public policy necessary to governmental actions and permanent policy of State. As a result, there are a detach about the deficit and housing conditions in the city of Natal, mainly North Zone, pointing out the importance of using the Unified Register of the federal government as an effective tool to measure the living conditions of Brazilian municipalities.

Modelagem dos efeitos da irradiação luminosa no cérebro de camundongos e rastreamento de neurônios durante experimentos de microscopia de fluorescência

The fluorescent proteins are an essential tool in many fields of biology, since they allow us to watch the development of structures and dynamic processes of cells in living tissue, with the aid of fluorescence microscopy. Optogenectics is another technique that is currently widely used in Neuroscience. In general, this technique allows to activate/deactivate neurons with the radiation of certain wavelengths on the cells that have ion channels sensitive to light, at the same time that can be used with fluorescent proteins. This dissertation has two main objectives. Initially, we study the interaction of light radiation and mice brain tissue to be applied in optogenetic experiments. In this step, we model absorption and scattering effects using mice brain tissue characteristics and Kubelka-Munk theory, for specific wavelengths, as a function of light penetration depth (distance) within the tissue. Furthermore, we model temperature variations using the finite element method to solve Pennes’ bioheat equation, with the aid of COMSOL Multiphysics Modeling Software 4.4, where we simulate protocols of light stimulation tipically used in optogenetics. Subsequently, we develop some computational algorithms to reduce the exposure of neuron cells to the light radiation necessary for the visualization of their emitted fluorescence. At this stage, we describe the image processing techniques developed to be used in fluorescence microscopy to reduce the exposure of the brain samples to continuous light, which is responsible for fluorochrome excitation. The developed techniques are able to track, in real time, a region of interest (ROI) and replace the fluorescence emitted by the cells by a virtual mask, as a result of the overlay of the tracked ROI and the fluorescence information previously stored, preserving cell location, independently of the time exposure to fluorescent light. In summary, this dissertation intends to investigate and describe the effects of light radiation in brain tissue, within the context of Optogenetics, in addition to providing a computational tool to be used in fluorescence microscopy experiments to reduce image bleaching and photodamage due to the intense exposure of fluorescent cells to light radiation.

Geração de padrão de marcha adaptável para uma órtese ativa de membros inferiores

Atualmente com o crescente aumento de dispositivos robóticos destinados para aplicação na área de mobilidade de pessoas que sofreram algum tipo de lesão medular, se faz necessário desenvolver novas ferramentas para tornar tais equipamentos mais adaptáveis, seguros e autônomos. Para que as órteses robóticas que auxiliam na locomoção de pessoas paraplégicas possam desempenhar sua função, estas devem ser capazes de reproduzir os movimentos perdidos com o máximo de fidelidade e segurança em ambientes que eventualmente possam conter obstáculos de diferentes tipos como buracos, escadas e calçadas. As órteses robóticas para membros inferiores têm a capacidade de caminhar, subir e descer degraus, todavia, esses movimentos, na maioria das vezes, não se adaptam ao ambiente, sendo assim, para uma órtese robótica que foi projetada para subir um degrau com uma determinada altura ao se deparar com um degrau maior provavelmente não conseguirá realizar essa tarefa com a mesma segurança. Para solucionar esse e outros problemas, esse trabalho apresenta um Sistema de Auxílio à Locomoção (SAL) dotado de um planejador de passos e um gerador de referências angulares com características antropomórficas para a órtese robótica Ortholeg. O SAL utiliza dados antropométricos do usuário para gerar um padrão de marcha personalizado, dessa forma, a órtese em questão é capaz de adaptar o tamanho do passo para não colidir com obstáculos presentes no ambiente e transpor buracos com diversos tamanhos, subir e descer escadas e calçadas com diferentes valores de altura e comprimento. Para desenvolver o sistema de auxílio à locomoção foram adaptadas técnicas de planejamento de caminho, usadas a princípio em robôs bípedes. São apresentados vários experimentos que mostram a órtese Ortholeg realizando alguns movimentos com características antropomórficas para diferentes distâncias de caminhada e três tipos de obstáculos: degrau, buraco e calçada. A autonomia adquirida com a utilização do sistema de planejamento apresentado facilita a utilização de órteses robóticas como também garante uma maior segurança ao usuário.

Estudo da deposição de filmes finos de BaTi(1-X)Zr(X)O3 por meio de planejamento Box-Behnken

Ferroelectric ceramics with perovskite structure (ABO3) are widely used in solid state memories (FeRAM’s and DRAM's) as well as multilayered capacitors, especially as a thin films. When doped with zirconium ions, BaTiO3-based materials form a solid solution known as barium zirconate titanate (BaTi1-xZrxO3). Also called BZT, this material can undergo significant changes in their electrical properties for a small variation of zirconium content in the crystal lattice. The present work is the study of the effects of deposition parameters of BaTi0,75Zr0,25O3 thin films by spin-coating method on their morphology and physical properties, through an experimental design of the Box-Behnken type. The resin used in the process has been synthesized by the polymeric precursor method (Pechini) and subsequently split into three portions each of which has its viscosity adjusted to 10, 20 and 30 mPa∙s by means of a rotary viscometer. The resins were then deposited on Pt/Ti/SiO2/Si substrates by spin-coating method on 15 different combinations of viscosity, spin speed (3000, 5500 and 8000 rpm) and the number of deposited layers (5, 8 and 11 layers) and then calcined at 800 ° C for 1 h. The phase composition of the films was analyzed by X-ray diffraction (XRD) and indexed with the JCPDS 36-0019. Surface morphology and grain size were observed by atomic force microscopy (AFM) indicating uniform films and average grain size around 40 nm. Images of the cross section of the films were obtained by scanning electron microscopy field emission (SEM-FEG), indicating very uniform thicknesses ranging from 140-700 nm between samples. Capacitance measurements were performed at room temperature using an impedance analyzer. The films presented dielectric constant values of 55-305 at 100kHz and low dielectric loss. The design indicated no significant interaction effects between the deposition parameters on the thickness of the films. The response surface methodology enabled better observes the simultaneous effect of variables.

Avaliação do planejamento de prótese parcial removível em modelos recebidos por laboratórios de João Pessoa-PB

Objective: To evaluate the planning and quality of plaster models for fabricati on of removable parti al dentures received from three commercial prosthodonti c laboratories located in the city of João Pessoa, PB, Brazil, which perform the casting procedures in their facilities. Methods: Forty 40 plaster models were photographed per laboratory, totalizing 120 models. The evaluation was performed using two questi onnaires, one designed for the dental prosthesis technicians, and another applied by the investigator for the visual evaluati on of the models. Data were analyzed using the SPSS soft ware version 13.0. Results: Ninety-two (76.7%) models did not present planning. In addition, no model presented references of insertion plane or guide pins. Calculati on of the mouth preparati on index (MPI) to evaluate the distribution of the oclusal and cingulum abutments or rests showed that 86 (71.7%) models were classifi ed as poor, 23 (19.2%) models as good and only 11 (9,.2%) models as acceptable. Defects were found in 102 (85%) models. Conclusion: The prosthodontists are not preparing the mouth of their pati ents, neglecti ng the planning of removable partial dentures, and passing this responsibility to the dental prosthesis technicians. In addition, the quality of the models sent to the laboratories was unsatisfactory.

Avaliação do planejamento de prótese parcial removível em modelos recebidos por laboratórios de João Pessoa-PB

Objective: To evaluate the planning and quality of plaster models for fabricati on of removable parti al dentures received from three commercial prosthodonti c laboratories located in the city of João Pessoa, PB, Brazil, which perform the casting procedures in their facilities. Methods: Forty 40 plaster models were photographed per laboratory, totalizing 120 models. The evaluation was performed using two questi onnaires, one designed for the dental prosthesis technicians, and another applied by the investigator for the visual evaluati on of the models. Data were analyzed using the SPSS soft ware version 13.0. Results: Ninety-two (76.7%) models did not present planning. In addition, no model presented references of insertion plane or guide pins. Calculati on of the mouth preparati on index (MPI) to evaluate the distribution of the oclusal and cingulum abutments or rests showed that 86 (71.7%) models were classifi ed as poor, 23 (19.2%) models as good and only 11 (9,.2%) models as acceptable. Defects were found in 102 (85%) models. Conclusion: The prosthodontists are not preparing the mouth of their pati ents, neglecti ng the planning of removable partial dentures, and passing this responsibility to the dental prosthesis technicians. In addition, the quality of the models sent to the laboratories was unsatisfactory.

Concentração do óleo de girassol em compostos insaturados utilizando destilação molecular

Vegetable oils are characterized as important raw materials in the supplying of natural substances of interest pharmaceutical, food and cosmetic industry. Sunflower oil stands out for its important composition present in unsaturated fatty acids such as oleic acid (C18:1) and linoleic (C18:2), responsible for many health benefits. The main objective of this study is obtain enriched fractions in unsaturated compounds from refined sunflower oil. The oil used in this study was characterized by the determination of some properties, like iodine number, acid number and viscosity. A transesterification was done to transform the triglycerides into their corresponding methyl esters of fatty acids. These was submitted the molecular distillation process, for present as an efficient alternative to separation and purification of these substances, using high vacuum and low temperatures. Of the esters fractions that was obtained, were analyzed by gas chromatography. The experimental design technique was used to evaluate the influence of the temperature variation of evaporation and condensation system on the percentage obtained residue. The evaporator temperature proved to be the most influential variable on the studied response. The optimized conditions for the answer was studied at 100 °C for evaporator temperature and 10 °C for the condenser temperature. The graph of "split ratio" showed that for the lowest flow feed (1 mL/min) and higher evaporator temperature (110 °C) was obtained in the largest fraction of distillate. It also used the study of the influence of evaporator temperature on the concentration of unsaturated compounds. The best operating conditions for temperature was 90 °C reached 82.21 % of unsaturated compounds. Elimination curves of the unsaturated compounds present in the distillate stream were obtained. The simulation results of the molecular distillation process of sunflower oil showed the concentration profiles for three different feed flow rates. The speed, temperature and thickness profiles of the liquid film were obtained. The speed of the film increases as the fluid flows through the walls of the evaporator, reaching a maximum on length of 0.075 m. The film thickness decreases on the route, since many compounds are volatilized. The result of the temperature profile had to be consistent with the literature reproduced, being constant after reaching the maximum operating temperature in the length of 0.15 m. This study allowed characterizing and focusing, through experimental analysis, unsaturated compounds and observing the sunflower oil´s behavior through process simulation.