996 resultados para Técnica de expansão de Heaviside
Resumo:
There is a lack of clinical studies evaluating techniques of functional impression for partially edentulous arches. The aim of this double-blind non-randomized controlled clinical trial was to compare the efficacy of altered cast impression (ACI) and direct functional impression (DFI) techniques. The efficacy was evaluated regarding the number of occlusal units on denture teeth, mucosa integrity at 24-hour follow-up and denture base extension. The sample included 51 patients (female and male) with mean age of 58.96 years treated at Dental Department of UFRN. The patients, exhibiting edentulous maxilla and mandibular Kennedy class I, were divided into two groups (group ACI, n=29; group DFI, n=22). Clinical evaluation was based on the number of occlusal units on natural and/or artificial teeth, mucosa integrity at 24-hour follow-up, and denture base extension. Statistical analysis was conducted using the software SPSS 17.0® (SPSS Inc., Chicago, Illinois). Student T-test was used to reveal association between number of occlusal units and impression technique while chi-square test showed association between mucosa integrity and impression technique. Fischer s exact test was applied for association between denture base extension and impression technique at 95% level of significance. No significant difference was observed between the groups regarding number of occlusal units, mucosa integrity and denture base extension. The altered cast technique did not provide significant improvement in comparison to the direct technique when the number of occlusal units, mucosa integrity and denture base extension
Resumo:
This study aimed to evaluate patients who underwent placement of zygomatic implants technique by Stella & Warner, considering the survival of conventional and zygomatic implants, sinus health and level of patient satisfaction in relation to oral rehabilitation. We evaluated 28 patients where 14 had received conventional and zygomatic implants, being rehabilitated with implant-fixed dentures (group 1) and 14 were rehabilitated only with conventional implants and implant-fixed dentures (group 2). The study had four phases, represented by radiographic evaluation of implants (stage I), clinical evaluation (stage II), assessing the health of the maxillary sinus (stage III) and a questionnaire to measure satisfaction of rehabilitation with fixed prosthesis implant Total -backed (stage IV). Group 2 underwent only stage IV, while group 1 participated in all stages. Descriptive analysis and statistics were performed, using the t test for independent samples in the evaluation of phase IV. The results demonstrated that the technique of Stella & Warner proved effective, allowing a high survival rate of conventional implants and zygomatic (100%), considering a minimum follow-up of 15 months and maximum 53 months after prosthetic rehabilitation. There were no pathological changes in tissues periimplants conventional and zygomatic implants analyzed. Radiographic findings showed satisfactory levels bone implants in the oral rehabilitation with conventional zygomatic implants and a good positioning of the apex of the zygomatic implants over the zygomatic bone. The presence of the zygomatic implant did not cause sinus and the t test showed a satisfaction index lower in group 1 compared with group 2. The zygomatic implant placement technique by Stella & Warner proved to be a predictable technique with high survival rate in patients with atrophic jaws, necessitating long-term follow-up to confirm the initial findings of the study
Resumo:
The aim of this study was to compare the misfit vertical, horizontal and passivity of zirconia and cobalt-chromium frameworks fabricated for CAD / CAM technology and conventional method of casting. Sixteen frameworks in one-piece, were obtained from a metallic matrix containing three Brånemark compatible implants with regular platform (Titamax Cortical Ti, Neodent). Eight frameworks were fabricated by CAD / CAM system (NeoShape, Neodent): four in zirconia (ZirCAD) and four cobalt-chromium (CoCrcad). Eight other frameworks were obtained by conventional casting method: four cobalt-chromium with UCLA abutment premachined Co-Cr (CoCrUCci) and four cobalt-chromium with UCLA abutment castable (CoCrUCc). The fit vertical, horizontal and passivity by one-screw test were measured using scanning electron microscopy with magnification of 250x. Initially evaluated the passivity by one-screw test and subsequently to assess the vertical and horizontal misfit, tightened all the screws with a torque of 20 Ncm. Mean, standard deviation, minimum and maximum values were calculated for each group. Measurements of horizontal misfit were transformed into cumulative frequency for categorization of the variable and the group later comparison groups. To evaluate the existence of quantitative differences between the groups tested for vertical misfit and passivity, we used the Kruskal-Wallis test. The Mann-Whitney test was used to compare group to group statistical differences (p <0.05). Were observed the respective mean and standard deviation for vertical misfit and passivity in micrometers: ZirCAD (5.9 ± 3.6, 107.2 ± 36), CoCrcad (1.2 ± 2.2, 107.5 ± 26 ), CoCrUCci (11.8 ± 9.8, 124.7 ± 74), CoCrUCc (12.9 ± 11.0, 108.8 ± 85). There were statistical differences in measures of vertical misfit (p = 0.000). The Mann-Whitney test revealed statistical differences (p <0.05) between all groups except between CoCrUCci and CoCrUCc (p = 0.619). No statistical difference was observed for the passivity. In relation to the horizontal misfit groups ZirCAD and CoCrcad did not show best values in relation to CoCrUCci and CoCrUCc. Based on the results it can be concluded that frameworks fabricated by CAD / CAM technology had better values of vertical fit than those manufactured by the casting method, nevertheless, the passivity was not influenced by manufacturing technique and material used. The horizontal fit obtained by frameworks manufactured by CAD / CAM was not superior to those manufactured by casting. A lower variability in vertical adjustment and passivity was observed when frameworks were fabricated by CAD / CAM technology
Resumo:
Este trabalho foi realizado no Escritório de Desenvolvimento Rural - Jales, região noroeste do Estado de São Paulo, com o objetivo de efetuar um levantamento do potencial da cultura da banana 'Maçã' na região, determinando-se indicadores técnicos e econômicos de dois sistemas de produção, os quais utilizam, no plantio, mudas micropropagadas e convencional. O levantamento de dados necessários à realização da pesquisa nos aspectos ligados à elaboração das matrizes de coeficientes técnicos, base para estimativas de custos de produção, foi obtido diretamente junto a produtores da região, e a metodologia de custos foi baseada no custo total de produção. Os resultados econômicos mostraram-se satisfatórios na região para os dois sistemas de produção, mas a receita líquida obtida com a utilização de mudas micropropagadas foi 34% maior que a obtida no sistema convencional.
Resumo:
Objetivou-se estimar os custos de produção e lucratividade do caju in natura na Regional de Jales, noroeste do Estado de São Paulo. Os dados foram levantados junto a produtores, a partir da aplicação de questionário e da elaboração de planilhas, para caracterizar todo o processo produtivo e realizar análise econômica. A produção de fruta para mesa exige um sistema de cultivo mais intensivo, principalmente no controle de pragas e doenças; por sua vez, eleva o custo de produção que, via de regra, é compensada pelos preços alcançados. Os custos de produção são altos, mas o que deve ser destacada é a participação relativa das embalagens que pode chegar a um terço do custo operacional efetivo, seguido pelos custos pós-colheita. Os indicadores de lucratividade mostram que a produção de caju é rentável nesta região, e o índice de lucratividade foi de 46,50%.
Resumo:
This discourse analyzes the technical assistance concerning the rural settlement, which is seen as a demand of the social movement that claims for agrarian reformation, and is a goal of II PNRA, launched in may 2004, as a essential national public politics on process of building and consolidation of settlement and familiar agriculture, proposing the return of technical assistance service and rural extension in Brazil, which were started in the and of 1940 s. We analyze, in particular, the technical assistance program, social and environmental agrarian reformation, on model settlement, a program created, especially, to the rural settlements, coordinated by INCRA. Based on the documental analyze and local study, it is noticed that the experience of technical assistance implemented on model settlement shows the non continuation and fragility on technical assistance actions to rural workers. This context goes against the lately technical assistance governmental apparatus, which ensures to make settlements stronger, to support and to get important the familiar agriculture system. This way, technical assistance execution, trough the tertiary service, follows the neoliberal strategy and, the State, besides decreases the estimate to public politics, takes its actions control from the State to the shared control through partnership and transferring of responsibility, expressing its historic lack of attention to the worker class demands. In spite of workers resistance, expectative and hope, the lack of these services, as well as the other politics deficiencies, which are necessary to the settlements, are endangering its activities and threatening its survival in the settlement
Resumo:
A dissertação versa sobre a Política de Assistência Estudantil e o processo de luta pela democratização do acesso à universidade, no contexto de expansão do ensino superior em tempos de crise estrutural do capital. Apresenta como unidade de análise as particularidades da pós-graduação em Serviço Social da UFRN e tem como objetivo principal apreender e analisar as condições de permanência disponibilizadas pela UFRN aos discentes de pós-graduação no contexto de expansão do Ensino Superior. O percurso teórico-metodológico de análise adotado na pesquisa se fundamentou numa perspectiva crítica do objeto de estudo a partir de uma concepção de totalidade, que pressupõe apreender as determinações socioeconômicas e políticas que incidem sobre a política de ensino superior e as condições de vida dos discentes do Programa de Pós-Graduação em Serviço Social (PPGSS). As análises fundamentaram-se em pesquisa bibliográfica como base teórico-metodológica da investigação, articulada com as reflexões que resultaram dos dados empíricos da pesquisa de campo na perspectiva de apreensão do objeto, em sua densidade histórica e num quadro de múltiplas determinações. Do ponto de vista metodológico foram entrevistados 26 discentes e realizada análise documental referentes a leis e documentos da política educacional em nível federal e dos organismos internacionais. A luta por ampliação do acesso à universidade está na agenda dos movimentos sociais no âmbito da educação, no entanto na conjuntura dos governos de Luis Inácio Lula da Silva (2003 a 2010) e Dilma Rousseff (2011 a 2012) a tendência tem sido seguir as orientações dos organismos internacionais e promover expansão de vagas sem assegurar estratégias de permanência compatíveis com as exigências de excelência acadêmica postas, por exemplo, na pós-graduação. Discentes entrevistados acessam o ensino superior e os cursos de pós-graduação e vivenciam dificuldades diárias para atender com qualidade às exigências acadêmicas em face de suas condições materiais de vida e de trabalho e dos limites da política de assistência estudantil que tem um perfil de programas e ações localizadas
Resumo:
The purpose of the work is to study the existence and nonexistence of shock wave solutions for the Burger equations. The study is developed in the context of Colombeau's theory of generalized functions (GFs). This study uses the equality in the strict sense and the weak equality of GFs. The shock wave solutions are given in terms of GFs that have the Heaviside function, in x and ( x, t) variables, as macroscopic aspect. This means that solutions are sought in the form of sequences of regularizations to the Heaviside function, in R-n and R-n x R, in the distributional limit sense.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Induzidos por uma mudança estrutural na dinâmica da sociedade internacional, muitos municípios, por meio do exercício da chamada paradiplomacia ou diplomacia federativa, vêm elaborando instrumentos de gestão municipal para captar recursos via experiências de Cooperação Técnica Internacional (CTI). Nesse contexto, o objetivo deste artigo é mapear conceitualmente o fenômeno de CTI, visando a facilitar sua compreensão e suas consequências práticas para a sociedade brasileira.
Resumo:
RESUMO A fístula arteriovenosa com bom fluxo sangüíneo é de fundamental importância para os pacientes portadores de insuficiência renal crônica em tratamento hemodialítico. Uma das complicações da fístula arteriovenosa é a síndrome do roubo, mas esta é de ocorrência incomum, e o seu tratamento está diretamente indicado quando há sintomas manifestos. Vários métodos foram propostos para sua correção nos membros superiores, sendo considerada a revascularização distal com ligadura arterial o procedimento de escolha. Neste relato de caso inédito, descreve-se o tratamento da síndrome do roubo de uma fístula arteriovenosa realizada em membro inferior, tratada com sucesso por meio da mesma técnica indicada para os membros superiores.
Resumo:
Alongside the advances of technologies, embedded systems are increasingly present in our everyday. Due to increasing demand for functionalities, many tasks are split among processors, requiring more efficient communication architectures, such as networks on chip (NoC). The NoCs are structures that have routers with channel point-to-point interconnect the cores of system on chip (SoC), providing communication. There are several networks on chip in the literature, each with its specific characteristics. Among these, for this work was chosen the Integrated Processing System NoC (IPNoSyS) as a network on chip with different characteristics compared to general NoCs, because their routing components also accumulate processing function, ie, units have functional able to execute instructions. With this new model, packets are processed and routed by the router architecture. This work aims at improving the performance of applications that have repetition, since these applications spend more time in their execution, which occurs through repeated execution of his instructions. Thus, this work proposes to optimize the runtime of these structures by employing a technique of instruction-level parallelism, in order to optimize the resources offered by the architecture. The applications are tested on a dedicated simulator and the results compared with the original version of the architecture, which in turn, implements only packet level parallelism
Resumo:
The public policies must have as their aimed the primordial at improving quality of life of families of a given population, however, its performance must be constantly monitored and evaluated scoped to ascertain whether these policies are reaching those goals. This work consisted in search of bibliographies and analysis that addressed the historical evolution of the debate on the subject of agrarian reform in Brazil as public policy and on the policy of technical assistance and rural extension, and collecting data in loco, in order to assess whether the actions implemented under this latter contribute to improvements in local development of settlements projects (PA) land reform in the state of Rio Grande do Norte (RN), this given the constant presented criticisms regarding their effectiveness, considering that it is difficult to empirically differentiate settlements they received of those who did not receive the technical assistance services. In this way, was held the data collection for comparison of characteristics (social organization, relationship with the local environment, form of producing and evaluation of technical assistance services) of two settlements in RN, being one you have received the technical assistance services and another who has not had access to these services in the past five years, at least, to confirm whether those who had access to the above services presents best features of social organization and the relationship with the local environment, mainly, which was confirmed in the results obtained, which still demonstrated that no significant differences on the forma to produce and of commercialization in PA studied. It was also found that the problems faced by families settled in PA studied resemble those seen verified in many other Brazilian states, especially as to how to use natural resources in the areas of land reform and the instability of the availability of technical assistance services. Should be guaranteed at continuity and universality of technical assistance services to settlements, seeking a higher focus on productive issues, which provide the income necessary for families settled can have a better quality of life
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)