The Relationship of Aggregate Durability to Trace Element Content, Interim Report, HR-266, 1984

This report is a brief overview of the recent Iowa Department of Transportation research in the area of durability of Portland cement, concrete under the direction of Wendeli Dubberke. Present plans are to publish a more detailed report on low Portland cement concrete- durability research in January, 1985.

Fish oil supplementation does not alter energy efficiency in healthy males

BACKGROUND AND AIMS: Fish oil (FO) supplementation prevents the development of obesity and insulin resistance, and upregulate the expression of UCP3 in skeletal muscle in rodents. This may represent indirect evidence that FO promotes fat oxidation and/or alter energy efficiency. The aim of this study was to evaluate whether such effects can be observed in humans. The metabolic effects of FO were assessed during exercise in order to obtain a direct measurement of energy efficiency. METHODS: Eight healthy male volunteers were studied with and without supplementation with 7.2 g/day FO (including 1.1 g/day eicosopentaenoic acid and 0.7 g/day decosahexaenoic acid) during 14 days. Their VO(2 max) was measured on cycle ergometer. Thereafter, energy metabolism (substrate oxidation, energy expenditure and energy efficiency) was assessed during a 30 min cycling exercise at 50% VO(2 max) performed 2 h 30 after a standardized, high carbohydrate breakfast. RESULTS: VO(2 max) was 38.6+/-2.2 after FO and 38.4+/-2.0 (mL x kg(-1) x min(-1)) in control conditions (NS). Basal plasma glucose, insulin and NEFA concentrations, and energy metabolism were similar with FO and in controls. During exercise, the increases in plasma NEFA concentrations, energy expenditure, glucose and lipid oxidation, and the decreases in glycaemia and insulinemia were not altered by FO intake. Energy efficiency was 22.4+/-0.6% after FO vs 21.8+/-0.7% in controls. In order to ascertain that the absence of effects of FO was not due to consumption of a carbohydrate meal immediately before exercise, 4 of the 8 subjects were re-studied in fasting conditions, FO also failed to alter energy efficiency in this subset of studies. CONCLUSION: FO supplementation did not significantly alter energy metabolism and energy efficiency during exercise in healthy humans.

Storage protein profile and amino acid content in wild rice Oryza glumaepatula

- The objective of this work was to determine the total protein profile and the contents of the four major protein fractions (albumin, globulin, prolamin and glutelin) and of the amino acids in the endosperm of the rice wild species Oryza glumaepatula. The experiment was performed with 29 accessions of this species, collected from 13 Brazilian locations, and two commercial cultivars. Protein samples were prepared using dried, polished, and ground grains to obtain homogeneous, dry flour used in the preparation of extracts. Oryza glumaepatula accessions were identified with the highest levels of total protein, albumin and glutelin protein fractions, and amino acids (with the exception of tryptophan) in comparison to the two analized rice cultivars. The albumin and glutelin profiles in SDS-Page were distinct between rice cultivars and O. glumaepatula. This wild species has the potential to increase the nutritional quality of rice storage protein through interspecific crosses.

DFMA- Analysis and Aspects of Applying Internet Based Collaborative Design for Axial Eccentric Oil-Pump Design

The integrated system of design for manufacturing and assembly (DFMA) and internet based collaborative design are presented to support product design, manufacturing process, and assembly planning for axial eccentric oil-pump design. The presented system manages and schedules group oriented collaborative activities. The design guidelines of internet based collaborative design & DFMA are expressed. The components and the manufacturing stages of axial eccentric oil-pump are expressed in detail. The file formats of the presented system include the data types of collaborative design of the product, assembly design, assembly planning and assembly system design. Product design and assembly planning can be operated synchronously and intelligently and they are integrated under the condition of internet based collaborative design and DFMA. The technologies of collaborative modelling, collaborative manufacturing, and internet based collaborative assembly for the specific pump construction are developed. A seven-security level is presented to ensure the security of the internet based collaborative design system.

Influence of rootstocks and pruning times on yield and on nutrient content and extraction in 'Niagara Rosada' grapevine

The objective of this work was to evaluate the influence of rootstocks and pruning times on yield and on nutrient content and extraction by pruned branches and harvested bunches of 'Niagara Rosada' grapevine in subtropical climate. The rootstocks 'IAC 766', 'IAC 572', 'IAC 313', 'IAC 571-6', and '106-8 Mgt' were evaluated. Treatments consisted of a combination between five rootstocks and three pruning times. At pruning, fresh and dry matter mass of branches were evaluated to estimate biomass accumulation. At harvest, yield was estimated by weighing of bunches per plant. Branches and bunches were sampled at pruning and at harvest, respectively, for nutrient content analysis. Nutrient content and dry matter mass of branches and bunches were used to estimate total nutrient extraction. 'Niagara Rosada' grapevine grafted onto the 'IAC 572' rootstock had the highest yield and dry matter mass of bunches, which were significantly different from the ones observed in 'Niagara Rosada'/'IAC 313'. 'Niagara Rosada' grafted onto the 'IAC 572' rootstock extracted the largest quantity of K, P, Mg, S, Cu, and Fe, differing from 'IAC 313' and 'IAC 766' in K and P extraction, and from '106-8 Mgt' in Mg and S extraction. Winter pruning results in higher yield, dry matter accumulation by branches, and total nutrient content and extraction.

Seed biometric parameters in oil palm accessions from a Brazilian germplasm bank

The objective of this work was to evaluate the morphological diversity of oil palm seeds and to cluster the accessions according to their morphological characteristics. Forty-one accessions from the oil palm germplasm bank of Embrapa Amazônia Ocidental were evaluated - 18 of Elaeis oleifera and 23 of E. guineensis. The groups were formed based on morphological characteristics, by principal component analysis. In E. oleifera, four groups were formed, tied to their region of origin, but with significant morphological differences between accessions from the same population. For tenera-type E. guineensis seeds, three widely divergent groups were formed, especially as to external parameters, which differentiated them from the other ones. The parameter endocarp thickness stood out in intra- and inter-population differentiation. For dura-type E. guineensis, three groups were formed, with larger seeds and thicker endocarps, which differed from all the other ones. The variability observed for seed characteristics in the analyzed accessions allows the establishment of different groups, to define strategies for genetic improvement.

Customer References as Marketing Practice in Company Web sites - Content and Discourse Analysis

Työn tarkoituksena oli tutkia sisältö- ja diskurssianalyysin avulla kuinka yritykset viestivät asiakasreferenssejä verkkosivuillaan. Työssä keskityttiin tutkimaan yritysten referenssikuvausten teemoja ja diskursseja, sekä sitä kuinka referenssisuhde rakentuu diskursiivisesti referenssikuvauksissa. Tutkimukseen valittiin kolme suomalaista ICT-alan yritystä: Nokia, TietoEnator ja F-Secure. Aineisto koostuu 140:stä yritysten WWW-sivuilta kerätystä referenssikuvauksesta. Sisältöanalyysin tuloksena havaittiin, että referenssikuvaukset keskittyvät kuvaamaan yksittäisiä tuote- tai projektitoimituksia referenssiasiakkaille kyseisten asiakassuhteiden valossa. Analyysin tuloksena tunnistettiin kolme diskurssia: hyötydiskurssi, sitoutumisen diskurssi sekä teknologisen eksperttiyden diskurssi. Diskurssit paljastavat referenssikuvausten retoriset keinot ja konstruoivat referenssisuhteen ja toimittajan subjektiposition eri näkökulmista. Pääpaino referenssikuvauksissa on toimittajan ratkaisun tuomissa hyödyissä. Diskurssit tuottavat referenssisuhteesta kuvan hyötyjä tuovana ja läheisenä asiakassuhteena, joka tarjoaa väylän ulkopuolisiin kyvykkyyksiin ja teknologioihin. Toimittaja esitetään referenssikuvauksissa diskurssista riippuen hyötyjen tuojana, luotettavana partnerina sekä kokeneena eksperttinä. Referenssiasiakas sen sijaan esitetään vain yhdestä näkökulmasta stereotyyppisesti tärkeänä ja tyytyväisenä asiakkaana.

Fish oil replacement by soybean oil in the diet of fat snook juveniles

The objective of this work was to evaluate fish oil replacement by soybean oil in diets, as for the effects on the performance and body composition of juveniles of fat snook (Centropomus parallelus). The experiment was carried out in a randomized block design, with three treatments (lipid sources) and six replicates, in a 60-day period. Fat snook juveniles (24.17±0.28g) were distributed in 18 experimental tanks of 200 L each, equipped with aeration and heating systems, under continuous water renovation (800% per day). Three isoproteic (44% CP) and isoenergetic (4,635 kcal CE kg-1) diets were formulated to comprise three replacement rates (0, 50, and 100%) of fish oil by soybean oil. Biometric analyses were done to evaluate fish performance, and two entire specimens from each replicate were used for body composition analyses. The zootechnical indices of weight gain (38.68±5.41 g), feed conversion (1.38±0.10), and specific growth at 1.70±0.18% weight gain per day were considered satisfactory. Lipid source substitution does not affect the performance and body composition of fat snook juveniles, which suggests that soybean oil can replace fish oil in diet formulation.

Size and fat content of gynes in relation to the mode of colony founding in ants (Hymenoptera; Formicidae)

In ants, there are two main processes of colony founding, the independent and the dependent modes. In the first case young queens start colony founding without the help of workers, whereas in the second case they are accompanied by workers. To determine the relation between the mode of colony founding and the physiology of queens, we collected mature gynes of 24 ant species. Mature gynes of species utilizing independent colony founding had a far higher relative fat content than gynes of species employing dependent colony founding. These fat reserves are stored during the period of maturation, i.e. between the time of emergence and mating, and serve as fuel during the time of colony founding to nurture the queen and the brood. Gynes of species founding independently but non claustrally were found to have a relative fat content intermediate between the values found for gynes founding independently and those founding dependently. This suggests that such gynes rely partially on their fat reserves and partially on the energy provided by prey they collect to nurture themselves and the first brood during the time of colony founding. Study of the fat content of mature gynes of all species has shown that it gives a good indication of the mode of colony founding.

In vitro maintenance, under slow-growth conditions, of oil palm germplasm obtained by embryo rescue

The objective of this work was to evaluate the in vitro maintenance of oil palm (Elaeis guineensis and E. oleifera) accessions under slow-growth conditions. Plants produced by embryo rescue were subject to 1/2MS culture medium supplemented with the carbohydrates sucrose, mannitol, and sorbitol at 1, 2, and 3% under 20 and 25±2ºC. After 12 months, the temperature of 20°C reduced plant growth. Sucrose is the most appropriate carbohydrate for maintaining the quality of the plants, whereas mannitol and sorbitol result in a reduced plant survival.

Kuivatusmenetelmien vaikutus heatset offset- ja syväpainetun SC-paperin laatuun

Työssä tutkittiin heatset offset- ja syväpainetun SC-paperin painojäljen laatua, kun koepaperikoneella valmistetun SC-paperin valmistuksessa käytettiin eri kuivatus-menetelmiä. Erityisesti kiinnostus kohdistui eri kuiva-ainepitoisuuksissa käytetyn ilmakuivatuksen aiheuttamiin painojäljen laatuvaikutuksiin. Painojäljen lisäksi työssä tarkasteltiin pohjapaperin ominaisuuksia kuivatuksen jakalanteroinnin jälkeen. Perinteisen sylinterikuivatuksen kuivatuskapasiteettia voidaan nostaa kuivattamalla paperia kuuman ilman avulla, jolloin paperin haihdutusnopeus nousee yli viisinkertaiseksi sylinterikuivatukseenverrattuna. Ilmakuivatus voidaan sijoittaa välittömästä kuivatusosan alkuun ennen ensimmäistä kuivatussylinteriä tai korkeampaan kuiva-ainepitoisuuteen sylinterikuivatuksen keskelle. Kuivattua paperia tarkasteltaessa kuuman ilman avulla kuivatun paperin ominaisuudet poikkesivat huokoisuuden ja öljynabsorption suhteen sylinterikuivatusta paperista sekä heatset offset- että syväpainopaperilla. Kalanterointi tasoitti koepisteiden välisiä muutoksia. Kalanteroidusta paperista havaittiin, että ilmakuivatuksen sijoittuminen välittömästi puristimen jälkeen kasvatti paperin molempien pintojen opasiteettia. Vastaavasti paperin tiheys kasvoi, kun paperia kuivattiin kuumalla ilmalla sekä ennen sylinterikuivatusta että sylinterikuivatuksen keskellä. Yhteistä ilmakuivatuksen käytölle kaikissa koepisteissä oli paperin huokoisuuden pieneneminen. Heatset offsetpainoprosessissa käytettävä kostutusvesi asettaa paperin kuitu-karhenemiselle vaatimuksia. Tutkimuksessa havaittiin, että puristimen jälkeen sijoitettu ilmakuivatus pienensi paperin taipumusta karhentua painoprosessissa. Muiden ominaisuuksien osalta paperin kuivatus kuuman ilman avulla yhdessä sylinterikuivatuksen kanssa ei jättänyt paperiin sellaisia jälkiä, jotka näkyisivät heatset offset- ja syväpainetun SC-paperin painojäljessä verrattuna kokonaan yksiviira-vientisesti sylinterikuivattuun paperiin.

Ilmanpoisto kiertovoiteluöljystä

Työn kirjallisuusosassa esitellään paperi- ja kartonkikoneiden kiertovoitelujärjestelmien rakennetta ja voitelussa käytettyjen öljyjen ominaisuuksia. Lisäksi on selvitetty voiteluöljyn kunnossapidon kannalta keskeisten epäpuhtauksien kuten veden, hiukkasten ja ilmakuplien analysointia. Suurissa voitelujärjestelmissä öljyn suuri ilmapitoisuus on usein ongelma, mihin ei ole ollut selkeää ratkaisua. Työn tavoitteena oli tutkia ilmakuplien poistamista voiteluöljystä alipainekäsittelyn avulla. Alipaineen vaikusta eri öljyille ja lämpötiloilla tutkittiin laboratoriossa standarditestillä ja määritettiin sopiva alipaine tehdaskokeisiin. Testeissä havaittiin odotutetusti viskositeetin eli käytännössä lämpötilan olevan ratkaiseva tekijä ilman poistumisnopeuteen. Tehdasmittakaavan kokeissa mitattiin rakenteeltaan yksinkertaisen ja vähän energiaa kuluttavan ilmanpoistolaitteen toimintaa. Laitteisto sijoitetaan paluuöljyputkistoon ja sen ei tarvitse olla kiertovoitelukeskuksen yhteydessä. Täysimittainen laitteisto rakennettiin kartonkikoneen ja paperikoneen kiertovoitelujärjestelmiin. Laitteen avulla voidaan käsitellä koko voitelujärjestelmän öljy. Tuloksien mukaan laite toimii odotetulla tavalla ja vähentää merkittävästi ilmapitoisuutta. Järjestelmä on heikoimmillaan tilanteessa, jossa lämpötilat on pidettävä alhaisina ja ilmakuplia on runsaasti.

Customization, transparency and proximity: a user- centered content strategy applied to the design of a virtual library website

We present a case study of the redesign of the organizational presentation and content of the Virtual Library website at the Universitat Oberta de Catalunya (Open University of Catalonia, UOC), based on a user-centered design strategy. The aim of the redesign was to provide users with more intuitive, usable and understandable content (textual content, resources and services) by implementing criteria of customization, transparency and proximity. The study also presents a selection of best practices for applying these criteria to the design of other library websites.

Effect of nitrogen and phosphorus supply on growth, chlorophyll content and tissue composition of the macroalga Chaetomorpha linum (O.F. Mull), Kutz, in a Mediterranean Coastal Lagoon

The effect of dissolved nutrients on growth, nutrient content and uptake rates of Chaetomorpha linum in a Mediterranean coastal lagoon (Tancada, Ebro delta, NE Spain) was studied in laboratory experiments. Water was enriched with distinct forms of nitrogen, such as nitrate or ammonium and phosphorus. Enrichment with N, P or with both nutrients resulted in a significant increase in the tissue content of these nutrients. N-enrichment was followed by an increase in chlorophyll content after 4 days of treatment, although the difference was only significant when nitrate was added without P. P-enrichment had no significant effect on chlorophyll content. In all the treatments an increase in biomass was obseved after 10 days. This increase was higher in the N+P treatments. In all the treatments the uptake rate was significantly higher when nutrients were added than in control jars. The uptake rate of N, as ammonium, and P were significantly higher when they were added alone while that of N as nitrate was higher in the N+P treatment. In the P-enriched cultures, the final P-content of macroalgal tissues was ten-fold that of the initial tissue concentrations, thereby indicating luxury P-uptake. Moreover, at the end of the incubation the N:P ratio increased to 80, showing that P rather than N was the limiting factor for C. linum in the Tancada lagoon. The relatively high availability of N is related to the N inputs from rice fields that surround the lagoon and to P binding in sediments.