Melhorias dos processos no setor de expedição em uma transportadora de cargas fracionadas

The transport market has forced organizations reduce the cost of services and processes, resulting from the highly competitive and, for such waste at all levels and processes are a focus of study for its elimination. This study refers to carrier fractional loads, located in the municipality of Itapecerica da Serra Layout and headquartered in São Paulo, which requires a rapid development throughout its structure, because its expansion was not accompanied by an evolution of effective processes. The need to increase efficiency in delivery with a reduced cost of transport forced the company to hire a logistics consulting to help identify potential bottlenecks in processes, suggest improvements with greater impact and implementation at the end of a critical analysis of results. This work focuses on the Layout of the warehouse shipping area of this organization and we used the method of action research to the consultant and involved could reach this conclusion collaboratively, as well as interviews with those involved in the process and also visual observation. Tools such as Key Performance Indicator, Mapping Workflow, Analytic Hierarchy Process, Applied Statistics and Standard Operating Procedure were used to assist in the identification, analysis and implementation of the proposed improvements

Gestão ambiental aplicada a prevenção, controle e recuperação de erosão linear acelerada no município de Ipeúna-SP

The erosion is a natural process of detachment, transport and deposition of soil and rock particles from one place to another. Human activities with no previous planning may accelerate this process, causing several damages to the environment and to society. In order to control the acceleration of these erosion processes caused by humans, prevention and improvement initiatives emerge. Regarding works which interfere directly in some of the natural resources, these initiatives must respect the intrinsic physical properties of the area of interest, if they aim to obtain effective results. Based on this scenario, this work proposes a few methods of accelerated linear erosion prevention, control and recovery in a specific area of the municipal district of Ipeúna (SP). For that matter, this study is based on a method of physiographic compartmentalization of the area, considering and integrating soil, relief, geology and the use and land cover properties of the study area. Plus, a flowchart with general orientations regarding management of eroded areas was produced, focused on the control and recovery of linear erosion. The result demonstrates the importance of careful erosion control, respecting the physical properties of each physiographic unit. The vegetative and mechanical conservationists methods, and the discipline of water flow, have found wide applicability in the study area.

Proposta de desenvolvimento de um setor de fomento à padronização de processos em uma empresa de usinagem

The industries face increasingly fierce competition, so that differentiation becomes more and more difficult. In the case of the branch of machine tool industries this scenario is aggressive, those firms face competition from around the world, which have good quality and low price. This paper aims to propose the creation of a department to promote standardization in a company of special tools. The goal was achieved from survey of theories and applications of quality management, knowledge management and standardization, done by scholars in these areas, which added the use of qualitative study resulted in a proposal that contained not only the creation of this department as possible approaches that can be applied by him. This work is limited to the study of a company that manufactures special tools of the state of São Paulo, which despite its small size and limited number of employees, also presents common situations to other companies in the field, especially with regard to the behavior employees, and present good practices that can be implemented by any company

Geofísica aplicada no diagnóstico preliminar do antigo lixão do município de Rio Claro - SP

The issue of solid waste disposal and urban growth are conflictive, since the areas where old uncontrolled refuse disposal were away from the city today are incorporated to the urban area population. Thus, now population is closer to the degradation of contaminants coming from waste disposal, and, in some cases, these areas become housing subdivisions. This work aims to support the diagnosis of a former landfill in the municipality of Rio Claro (SP), using geophysical methods through resistivity anomalies. In order to develop the diagnostic, it was utilized water and soil analysis of a preliminary report and techniques of vertical electrical sounding and electrical profiling. The areas influenced by the garbage presented less resistivity than the one of the natural subsoil. Through the interpretation of results, the local potentiometric map was elaborated, as well as a map of calculated resistivity. The interpretation of these products indicated a disagreement between the groundwater flow and the current topography, leading to an identification of a preferential direction of the contamination plume in the NE-SW. These observations prove the applicability of geoelectrical methods in areas of former waste disposal with little information.

Uma Nova Abordagem do Ciclo Reprodutivo dos Machos e Fêmeas, e da Origem e Desenvolvimento dos Oócitos dos Ostariophysi e Perciformes Neotropicais Aplicada a Representantes da Série Otophysi, Gymnotus sp. (Gymnotidae), Hoplias Malabaricus (Erythrinidae), Sorubim Lima (Pimelodidae) e Tanichthys Albonubes (Cyprinidae), e dos Perciformes, Cichla Temensis (Cichlidae)

Nos peixes, durante a vida reprodutiva o desenvolvimento gonadal é cíclico e anual. As alterações estruturais das gônadas de machos e fêmeas provêm parâmetros úteis para a sua classificação macroscópica e microscópica. Porém, o desenvolvimento das células germinativas, nem sempre é consoante com os diferentes tipos de classificação e, machos e fêmeas nem sempre parecem concatenados. Neste estudo, aplicando-se propostas recentes, utilizadas primariamente para peixes derivados, notadamente os Perciformes marinhos, e tomando como modelo experimental representantes da série Otophysi, Hoplias malabaricus (Characiformes), Tanichthys albonubes (Cypriniformes), Sorubim lima (Siluriformes) e Gymnotus sp. (Gymnotiformes), e dos Perciformes Neotropicais, Cichla temensis, foram descritos, comparativamente, os eventos iniciais da oogênese e da espermatogênese, assim como o desenvolvimento oocitário a fim de traçar um paralelo entre grupos basais e derivados. A partir dos resultados, verificou-se que a maioria dos eventos morfológicos durante o desenvolvimento oocitário é similar entre grupos basais e derivados. Os Perciformes de água doce divergem dos grupos basais por duas características: a presença de inclusões lipídicas, que surgem no citoplasma perinuclear após o início da formação dos alvéolos corticais e deposição de vitelo e por uma tênue proteólise do vitelo durante a maturação final. A foliculogênese e espermatogênese não apresentam divergências e parecem ser processos conservados entre os Teleostei. Durante a fase de Regeneração, os eventos iniciais desses processos em fêmeas e machos, respectivamente, são responsáveis por altos índices de proliferação das células germinativas, quando comparado às demais fases. Além disso, analisou-se ...(Resumo completo, clicar acesso eletrônico abaixo)

Carta geológico-geotécnica aplicada ao planejamento urbano da região do Córrego Bertini, município de Americana - SP

This paper focuses on the implementation of a geological and geotechnical mapping to the planning of the region stream Bertini, territorial expansion area of the municipality of Americana (SP), a medium-sized city in the countryside of Sao Paulo state, with great potential for growth industrial and residential. To this end, based on the methodology established by the Institute for Technological Research, the charters geological and geotechnical aimed at exposing the capabilities and limitations of the soil. The analysis of similar soil characteristics such as geology, geomorphology, slope, geotechnical testing and the current use and land cover was possible to recognize four geotechinical units. The units I and III are related to areas of top and concave and convex parts of the study area, shown to be sites of low occupancy restriction. However the units II and IV, respectively allocated in the floodplain of the Piracicaba River and the banks of the stream Bertini and some of its drainage, showed a more restricted area due to proximity to water bodies and drainages that offer higher slopes.

Desenvolvimento de um anteprojeto de um sistema de digitalização da proteção e controle aplicada a uma subestação elétrica industrial de alta tensão

The proposed of scanning of an electrical industrial substation HV is associated with a segment of the Electrotechnical area and aims the study and preliminary application of digital technologies in the protection, control, measurement and automation maneuvers aimed at a Industrial Electrical System typical High Voltage. Well intended to supervision, protection and control of major electrical and thermal quantities involved in a substation, such as voltage levels, current, temperature, power factor, loads of transformers and circuit feeders, status of interlocking devices, switching equipment maneuvers, etc

Etnomatematica: psicologia aplicada à educação matemática

Investigations in ethnomathematics show that there are several cultural forms of mathematics, mathematics different dominant. Currently, most research in ethnomathematics aim an ethnographic study of anthropological or cultural groups. However, there is a strong need for studies in ethnomathematics is to target the pedagogical action, involving the teachinglearning practices. So the big challenge for researchers in ethnomathematics is the development of study and teaching practices in line with the objectives philosophicaltheoretical Program Ethnomathematics

Analise de defeitos em motores através de vibração mecânica: estudo de caso

Revolving machines are among the most used equipment in general industry and therefore expenditures on this equipment class are a significant portion of the total amount spent by the company. If there is an unscheduled stop of some of this equipment, industrial plants can lose huge amounts of money caused by interrupted production and parts delay. Others may increase significantly maintenance costs due to consequences elsewhere not affected before. Even plant and people safety can be in danger if there is an operation interruption without a backup system start. This work is focused on a rotating system case study which is monitored by vibration analysis that shows that is possible to determine when is the most appropriate time for equipment intervention without any reliability loss just by using a simple and cheap system which is not much used because professionals are not aware to its utility. Industrial facilities were evaluated by fail detection and historical analysis in some equipment in order to show feasibility of vibration analysis through a before-during-after process. The plant evaluated is part of a chemical multinational located in Guaratinguetá-SP. At this time, that plant had around 650 critical equipment monthly monitored and no unscheduled shutdown was registered in one year period due to equipment monitoring

Formalismo canônico da mecânica clássica: alicerce da mecânica quântica

We present a succinct review of the canonical formalism of classical mechanics, followed by a brief review of the main representations of quantum mechanics. We emphasize the formal similarities between the corresponding equations. We notice that these similarities contributed to the formulation of quantum mechanics. Of course, the driving force behind the search of any new physics is based on experimental evidence

Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...

Uma nova abordagem do ciclo reprodutivo dos machos e fêmeas, e da origem e desenvolvimento dos oócitos do Ostariophysi, e Perciformes neotropicais aplicada ao Anostomidae, Schizodon nasutus e ao Sciaenidae, Plagioscion squamosissimus

Nos peixes, durante a vida reprodutiva o desenvolvimento gonadal é cíclico e anual. As gônadas passam por alterações de forma, de tamanho, de cor e de textura que são utilizadas como parâmetros para a sua classificação macroscópica. Porém, o desenvolvimento das células germinativas, nem sempre é consoante com essa classificação e, machos e fêmeas nem sempre parecem concatenados. Novas propostas de classificação vêm surgindo na tentativa de compatibilizar as informações macroscópicas e histológicas, considerando a atividade do epitélio germinativo de machos e fêmeas. Ocorre, no entanto, que essas propostas vêm sendo desenvolvidas em estudos com Perciformes marinhos. Aqui, tomando-se como modelo o Characiformes, Schizodon nasutus e o Perciformes, Plagioscion squamosissimus analisou-se comparativamente o ciclo reprodutivo de ambas as espécies, frente às classificações tradicionais e às novas propostas de classificação adicionadas das características histológicas das gônadas, e pode-se perceber que a análise macroscópica das gônadas, muitas vezes, não corresponde a sua verdadeira fase do ciclo reprodutivo, analisado microscopicamente. Isso se dá porque muitas das características cruciais para distinção das fases não são visíveis a olho nu, como folículos atrésicos, maturação do oócito ou anastomose de túbulos ou lóbulos testiculares. Assim, para determinação das fases reprodutivas, deve-se sempre contar com a análise microscópica e, no presente estudo, foi considerado que a melhor classificação para tal é a proposta de Brown-Peterson e colaboradores (2009), que divide o ciclo reprodutivo em seis fases reprodutivas, bastante detalhadas. A partir da descrição do ciclo reprodutivo feminino e masculino em S. nasutus e P. squamosissimus, os dados foram correlacionados com o índice gonadossomático, determinando, assim, que o período... (Resumo completo, clicar acesso eletrônico abaixo)

Análise teórica e experimental de uma ventaneira de alto forno, visando seu comportamento térmico e fluidodinâmico

In this work, it was studied the thermal and fluid dynamic behavior from theorical and experimental point of view of a blast furnace tuyere. The tuyere is responsible for the hot air insuflation into the blast furnace. The parameter used in the comparison was the difference between the cooling water inlet and outlet temperatures. There were used forced convection correlations inside circular sections with adequations for non circular sections. Based on operations dates of flux and thermal loads it was possible to model numerically the tuyere, and, since it was obtained the wall temperatures, estimate the conduction and convection resistances and the heat flux through the walls in contact with the water. The total heat fluxes from wall to water were applied to the energy conservation equation where could be estimated the theorical temperature variation. Compared to the real value, the theorical value presented a difference of 0,2 °C. Considering that the boundary conditions around the tuyere are transitories and that your channels have some rugosity irregularities we can consider the estimation method for cooling system coherent with the real operational parameters

Abordagem scrum de gerenciamento ágil para desenvolvimento de novos produtos aplicada a área de ensaios de uma fabricante de aeronaves

There are many approaches and techniques about Administration and Management of Projects in order to provide greater agility, efficiency and transparency during the development process of new products. Simultaneously, a pursuit for a management approach more flexible in its planning and strategic changes during the development campaign, such as, comprehend the project's unpredictability level and deal it by monitoring and estimates tools. These features tend to accentuate itself in manufacturers of complex products, as aircraft and other aerospace technologies. By these conditions thus research aims to describe a case when the Agile Management Processing of Project Development Scrum was used in the Test area of an aircraft manufacturer. Focused on the Scrum implementation over the area, its adaptation, evolution and achievements the research proposes to analyze the improvements, indicate the obstacles and discuss solutions, contributing then to the theoretical basis of the considered theme and futures updates applicable to the area. The research is classified as qualitative; furthermore the information and data analyzed were obtained by interviews with professionals and observations of the processes from the major aircraft manufacturer

Analise mecânica e microestrutural em estruturas tubulares aeronáuticas soldadas de aço ABNT 4130

Airplane Motor Cradles have a complex geometry, since they require different conbinations between different tubes and TIG welded in several angles. In T-25 aircraft and Universal T-27 Tucano (EMBRAER / FAB), besides having to bear the engine balance, these components maintain fixed the nose landing gear in another extremity. They are considered critical to flight safety, and for this reason, the aviation standards are extremely rigid in their production, imposing a zero index” of defects on the final weld metal quality. These structures may be containing an historical of welding repairs, whose effects on their structural integrity are not computed. In this work we analyzed the standardised AISI 4130 steel and the raw steel of tubes to the Airplane Motor Cradles. First of all, microscopy and microanalysis of the base steel, then we analyzed the effects of the TIG weld. Tensile testing was conducted to measure the difference between the mechanical properties of standardised steel and without this treatment