1000 resultados para CIENCIAS EXATAS E DA TERRA
Resumo:
The textile industry is one of the most polluting in the world (AHMEDCHEKKAT et al. 2011), generating wastewater with high organic loading. Among the pollutants present in these effluents are dyes, substances with complex structures, toxic and carcinogenic characteristics, besides having a strong staining. Improper disposal of these substances to the environment, without performing a pre-treatment can cause major environmental impacts. The objective this thesis to use a technique of electrochemical oxidation of boron doped diamond anode, BDD, for the treatment of a synthetic dye and a textile real effluent. In addition to studying the behavior of different electrolytes (HClO4, H3PO4, NaCl and Na2SO4) and current densities (15, 60, 90 and 120 mA.cm-2 ), and compare the methods with Rhodamine B (RhB) photolysis, electrolysis and photoelectrocatalytic using H3PO4 and Na2SO4. Electrochemical oxidation studies were performed in different ratio sp3 /sp2 of BDD with solution of RhB. To achieve these objectives, analysis of pH, conductivity, UV-visible, TOC, HPLC and GC-MS were developed. Based on the results with the Rhodamine B, it was observed that in all cases occurred at mineralization, independent of electrolyte and current density, but these parameters affect the speed and efficiency of mineralization. The radiation of light was favorable during the electrolysis of RhB with phosphate and sulfate. Regarding the oxidation in BDD anode with different ratio sp3 /sp2 (165, 176, 206, 220, 262 e 329), with lower carbon-sp3 had a longer favoring the electrochemical conversion of RhB, instead of combustion. The greater the carbon content on the anodes BDD took the biggest favor of direct electrochemical oxidation
Resumo:
This study aimed mainly to evaluate the influence of xanthan gum (XG) and carboxymethylcellulose (CMC) in the filtration process of water-based drilling fluids, considering the conformational changes suffered by the polyelectrolyte with the addition of sodium chloride (NaCl) in different concentrations (0.17, 0.34 and 0.51 mol.L-1). It was also evaluated the behavior of the fluid by the addition of calcium carbonate (CaCO3) in pure water and in brine. Seeking a better understanding of the interaction between the polymers used and CaCO3, polymer adsorption analyzes were performed using a depletion method, which yielded a higher percentage of adsorption of Xanthan Gum in this material (29%), which can justify the formation of a thin and waterproof filter cake for drilling fluids containing this polymer. However, the best values of apparent viscosity (20 and 24 mPa.s) and volume of filtrate (8.0 and 8.1 mL) were obtained for the systems consisting of xanthan gum, CMC and CaCO3, in NaCl aqueous solutions concentrations of 0.34 and 0.51 mol.L-1, respectively. The values can be related to the presence of CMC that increases the apparent viscosity and reduces the volume of filtrate. In addition, the CaCO3 added acts as a bridging agent, promoting the formation of a less permeable filter cake
Resumo:
The improved performance of hydraulic binders, the base of Portland cement, consists in the careful selection and application of materials that promote greater durability and reduced maintenance costs There is a wide variety of chemical additives used in Portland cement slurries for cementing oil wells. These are designed to work in temperatures below 0 ° C (frozen areas of land) to 300 ° C (thermal recovery wells and geothermal); pressure ranges near ambient pressure (in shallow wells) to greater than 200 MPa (in deep wells). Thus, additives make possible the adaptation of the cement slurries for application under various conditions. Among the materials used in Portland cement slurry, for oil wells, the materials with nanometer scale have been applied with good results. The nanossílica, formed by a dispersion of SiO2 particles, in the nanometer scale, when used in cement systems improves the plastic characteristics and mechanical properties of the hardened material. This dispersion is used commercially as filler material, modifier of rheological properties and / or in recovery processes construction. It is also used in many product formulations such as paints, plastics, synthetic rubbers, adhesives, sealants and insulating materials Based on the above, this study aims to evaluate the performance of nanossílica as extender additive and improver of the performance of cement slurries subjected to low temperatures (5 ° C ± 3 ° C) for application to early stages of marine oil wells. Cement slurries were formulated, with densities 11.0;12.0 and 13.0 ppg, and concentrations of 0; 0.5, 1.0 and 1.5%. The cement slurries were subjected to cold temperatures (5 ° C ± 3 ° C), and its evaluation performed by tests rheological stability, free water and compressive strength in accordance with the procedures set by API SPEC 10A. Thermal characterization tests (TG / DTA) and crystallographic (XRD) were also performed. The use of nanossílica promoted reduction of 30% of the volume of free water and increased compression resistance value of 54.2% with respect to the default cement slurry. Therefore, nanossílica presented as a promising material for use in cement slurries used in the early stages of low-temperature oil wells
Resumo:
Polyelectrolyte complexes (PECs) nanoparticles were prepared using chitosan and sodium polymethacrylate. The complex formation was investigated using turbidimetry, conductometry, viscometry, and dynamic light scattering. The presence of excess positive charges was evidenced by zeta potential measurements. The particle diameter was characterized by dynamic light scattering and the morphology by atomic force microscopy. In all experiments an abrupt change in behavior was observed at a carboxyl:amino molar ratio around 0.7−0.8. Those changes in behavior were related to a proposed mechanism of complex formation based on the decrease of macromolecular dimensions of soluble polyelectrolyte complex clusters, followed by phase segregation
Resumo:
Among the potentially polluting economic activities that compromise the quality of soil and groundwater stations are fuel dealers. Leakage of oil derived fuels in underground tanks or activities improperly with these pollutants can contaminate large areas, causing serious environmental and toxicological problems. The number of gas stations grew haphazardly, without any kind of control, thus the environmental impacts generated by these enterprises grew causing pollution of soil and groundwater. Surfactants using various techniques have been proposed to remedy this kind of contamination. This study presents innovation as the application of different systems containing surfactant in the vapor phase and compares their diesel removal efficiencies of soil containing this contaminant. For this, a system that contains seven injection wells the following vaporized solutions: water, surfactant solution, microemulsion and nanoemulsion, The surfactants used were saponified coconut oil (OCS), in aqueous solution and an ethoxylated alcohol UNTL-90: aqueous solution , and nanoemulsion and microemulsion systems. Among the systems investigated, the nanoemulsion showed the highest efficiency, achieving 88% removal of residual phase diesel, the most ecologically and technically feasible by a system with lower content of active matter
Resumo:
This study aimed to evaluate the influence of the main meteorological mechanisms trainers and inhibitors of precipitation, and the interactions between different scales of operation, the spatial and temporal variability of the annual cycle of precipitation in the Rio Grande do Norte. Além disso, considerando as circunstâncias locais e regionais, criando assim uma base científica para apoiar ações futuras na gestão da demanda de água no Estado. Database from monthly precipitation of 45 years, ranging between 1963 and 2007, data provided by EMPARN. The methodology used to achieve the results was initially composed of descriptive statistical analysis of historical data to prove the stability of the series, were applied after, geostatistics tool for plotting maps of the variables, within the geostatistical we opted for by Kriging interpolation method because it was the method that showed the best results and minor errors. Among the results, we highlight the annual cycle of rainfall the State which is influenced by meteorological mechanisms of different spatial and temporal scales, where the main mechanisms cycle modulators are the Conference Intertropical Zone (ITCZ) acting since midFebruary to mid May throughout the state, waves Leste (OL), Lines of instability (LI), breeze systems and orographic rainfall acting mainly in the Coastal strip between February and July. Along with vortice of high levels (VCANs), Complex Mesoscale Convective (CCMs) and orographic rain in any region of the state mainly in spring and summer. In terms of larger scale phenomena stood out El Niño and La Niña, ENSO in the tropical Pacific basin. In La Niña episodes usually occur normal or rainy years, as upon the occurrence of prolonged periods of drought are influenced by EL NIÑO. In the Atlantic Ocean the standard Dipole also affects the intensity of the rainfall cycle in State. The cycle of rains in Rio Grande do Norte is divided into two periods, one comprising the regions West, Central and the Western Portion of the Wasteland Potiguar mesoregions of west Chapada Borborema, causing rains from midFebruary to mid-May and a second period of cycle, between February-July, where rains occur in mesoregions East and of the Wasteland, located upwind of the Chapada Borborema, both interspersed with dry periods without occurrence of significant rainfall and transition periods of rainy - dry and dry-rainy where isolated rainfall occur. Approximately 82% of the rainfall stations of the state which corresponds to 83.4% of the total area of Rio Grande do Norte, do not record annual volumes above 900 mm. Because the water supply of the State be maintained by small reservoirs already are in an advanced state of eutrophication, when the rains occur, act to wash and replace the water in the reservoirs, improving the quality of these, reducing the eutrophication process. When rain they do not significantly occur or after long periods of shortages, the process of eutrophication and deterioration of water in dams increased significantly. Through knowledge of the behavior of the annual cycle of rainfall can have an intimate knowledge of how it may be the tendency of rainy or prone to shortages following period, mainly observing the trends of larger scale phenomena
Resumo:
In recent decades, the debate surrounding the consequences of the HIV has passed by great changes. Earlier, prevention campaigns focused risk groups then risk behaviors and ultimately vulnerability. Furthermore, over the years, the dimensions of HIV that emerged in the social environment are these: internalization, heterosexualization, impoverishment and feminization. Based on these contexts, the composition of this study comprises two papers: the former has the overall objective to analyze the epidemiology and incidence of HIV in Brazilian regions in the period from 1980 to 2012; the latter, it aims to find out whether there is the relationship among safe practices, knowledge and perception of women residents in Manaus and Boa Vista cities on the infection by HIV. In paper 1, it was used information from the Health Ministry, as a data source. Besides, it was developed an exploratory and spatial analysis of incidence rates and relative proportion of notified cases. In paper 2, was used as a source of data, the research "Evaluating the process of spatial and epidemic diffusion of HIV in the federal units of Brazil-Northern Region" in 2008. Furthermore, Statistical Techniques of Cluster Analysis, Analysis of Variance, Chi-Square and Logistic Regression were applied. In this paper, it was found that, in Brazilian Regions, the prevalence of reported cases occurred among heterosexuals in men 20-40 year age group and residing in metropolitan areas. It was observed a significant spatial correlation of the incidence rate of reported cases of HIV. It was also noted by the results that have good knowledge and awareness about HIV does not imply, essentially, in a safe sexual intercourse. These results have shown the need public policies geared to the guiding of society, based in educational strategies aiming both information about the virus and its prevention, as well as public awareness for safe sex practices or in stable or not intercourses
Resumo:
The studied area is situated in the northeastern extremity of the Rio Grande do Norte State, between the municipalities of Taipu and Poço Branco, and is geologically inserted into the São José do Campestre Crystalline Terrain within the Borborema Province, where the analysis of field relationships, petrographic and geochemical data allowed the distinction of three plutons named: Gameleira, Taipu and Pitombeira. The Gamaleira Pluton is composed of granodioritic rocks characterized by zoned plagioclase phenocrysts, with amphibole and biotite as the main mafic phases. Geochemically, these are metaluminous rocks of calc-alkaline nature and magnesian character. The Pitombeira Pluton encompasses two facies: (a) a coarse-grained to porphyritic monzo- to syenogranitic facies marked by K-feldspar phenocrysts; and (b) a quartz dioritic to tonalitic facies with partially zoned plagioclase laths showing chilled rims. Geochemically, rocks of the monzo- to syenogranitic facies are transitional between metaluminous and peraluminous, display a subalkaline nature (high K calc-alkaline) and a ferroan character, whereas rocks of the quartz dioritic to tonalitic facies are metaluminous, with shoshonitic affinity and ferroan character. Lastly, the Taipu Pluton is made of monzoto syenogranitic rocks with biotite as the chief mafic mineral. They are peraluminous rocks of subalkaline nature (high-K calc-alkaline) and ferroan character. Regarding the rare-earth elements (REE), it is possible to conclude that the three studied plutons display negative Eu anomalies and a relative enrichment of LREE over HREE, with LaN/YbN ratios between 9.39 to 16.20 (Gameleira Pluton), 17.99 to 31.39 (granitic facies of the Pitombeira Pluton), 14.15 to 21.81 (dioritic facies of the Pitombeira Pluton) and 15.17 to 175.41 (Taipu Pluton). Based on the combined investigation of geochemical data and discrimination tectonic diagrams, a late- to post-collisional tectonic environment is suggested for the plutons here studied
Resumo:
The technological evolution has been making the Distance Education accessible for a greater number of citizens anytime and anywhere. The potential increase of the supply for mobile devices integrated to mobile learning environments allows that the information comes out of the physical environment, creating opportunities for students and teachers to create geographically distributed learning scenarios. However, many applications developed for these environments remain isolated from each other and do not become integrated sufficiently into the virtual learning environments (AVA). This dissertation presents an interoperability model between mobile devices and distinct AVA based on webservices. For the conception of this model, requirements engineering and software architecture techniques were used. With the goal of showing the model viability, a mobile application focused on surveys has been developed, and additionally, the main functionalities related to the interoperability were tested
Resumo:
This study aimed to assess ambient air quality in a urban area of Natal, capital of Rio Grande do Norte (latitude 5º49'29 '' S and longitude 35º13'34'' W), aiming to determine the metals concentration in particulate matter (PM10 and PM2,5) of atmospheric air in the urban area o the Natal city. The sampling period for the study consisted of data acquisition from January to December 2012. Samples were collected on glass fiber filters by means of two large volumes samplers, one for PM2,5 (AGV PM 2,5) and another for PM10 (PM10 AGV). Monthly averages ranged from 8.92 to 19.80 g.m-3 , where the annual average was 16,21 g.m-3 for PM10 and PM2,5 monthly averages ranged from 2,84 to 7,89 g.m -3 , with an annual average of 5,61 g.m-3 . The results of PM2,5 and PM10 concentrations were related meteorological variables and for information on the effects of these variables on the concentration of PM, an exploratory analysis of the data using Principal Component Analysis (PCA) was performed. The results of the PCA showed that with increasing barometric pressure, the direction of the winds, the rainfall and relative humidity decreases the concentration of PM and the variable weekday little influence compared the meteorological variables. Filters containing particulate matter were selected in six days and subjected to microwave digestion. After digestion samples were analyzed by with Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The concentrations for heavy metals Vanadium, Chromium, Manganese, Nickel, Copper, Arsenic and lead were determined. The highest concentrations of metals were for Pb and Cu, whose average PM10 values were, respectively, 5,34 and 2,34 ng.m-3 and PM2,5 4,68 and 2,95 ng.m-3 . Concentrations for metals V, Cr, Mn, Ni, and Cd were respectively 0,13, 0,39, 0,48, 0,45 and 0,03 ng.m-3 for PM10 fraction and PM2,5 fraction, 0,05, 0,10, 0,10, 0,34 and 0,01 ng.m-3. The concentration for As was null for the two fractions
Resumo:
In this work, the reference drugs, generic and similar to the active ingredients acetylsalicylic acid, paracetamol, captopril, hydrochlorothiazide and mebendazole were purchased from local pharmacies and studied by thermogravimetry (TG) and Differential Scanning Calorimetry (DSC). Thermal decomposition was assessed to obtain from the Ozawa method the activation energy in inert atmosphere (nitrogen), using three different heating ratios (5, 10 and 20 o C min-1). The pharmaceutical formulation of the AAS reference was the one who presented different from the others (generic and similar) Thermogravimetric profile indicating likely interaction between the active ingredient and excipients. Was observed at the heating rate of the inverse temperature that no linearity of the data, ie, there was no correlation between the percentage of mass loss and the activation energy involved in the thermal decomposition of the pharmaceutical formulation of the AAS reference log graph. The analysis by differential scanning calorimetry was performed in nitrogen atmosphere with a heating rate of 10 ° C min-1. In the analysis of these same drugs, the data curves found on the melting point were, except for hydrochlorothiazide, are consistent with the literature. Hydrochlorothiazide presented a melting point well below that found in the literature, which may be justified due to the interaction of the active ingredient with the excipient lactose. In the study of purity, using the Van't Hoff equation, the reference drugs hydrochlorothiazide and mebendazole reference generic and showed similar impurity content below the limit established that this equation must be greater than 2.5 mol%
Resumo:
Currently it is expected that science education will enable a more comprehensive conception of the world and of the relationship between scientific knowledge, technology and society. Thus, we seek the science teaching attend around contexts related to science, technology and society (STS). According CTS approaches, the science education should promote learning in the scientific, technological and social fields, from experienced real contexts, generating motivation to students, offering them tools to work as scientifically literate citizens. For this, it becomes crucial to resort to innovative activities and the various methodologies and appropriate teaching materials, and there is a lack of this perspective in general basic education, which drives the practice of an STS approach. Therefore, the aim of this research is the production of an instructional sequence for the exploration of the theme: "The quality of the water in the municipality of Cuité-PB," according to focus CTS in the 2nd year of high school. The choice of this topic is due to the problem caused by the quality of water in this municipality, with the concern to address an issue that came to work the critical / reflective understanding of a real context, in order to sensitize students to the importance of scientific / technological knowledge. The selection criteria of STS subjects were also observed. In this research the materials were produced and applied by the teacher / researcher. For data collection we used the observation and analysis of student records. The results were encouraging in the sense of participation, motivation and skill acquisition. This research contributes to the teaching of science with a focus STS, as well as encourage the use of perspective in new contexts with real questioning
Resumo:
This work presents a proposal to build a Mathematics Teaching Laboratory (MTL) whose main theme is the study, construction and use of instruments for navigation and location of mathematical content in an interdisciplinary way approach, and develop a notebook of activities focused on navigational instruments. For this it was necessary a literature review to understand the different conceptions of MTL and its pedagogical implications. The methodology used was literature research, construction and handling of instruments, and pedagogical experimentation. Lorenzato (2006) highlights the importance of an environment and suitable for a professional who can do a good job instruments. The implementation of an LEM can find some obstacles. The lack of support from other teachers or the management, the lack of a suitable place to store the materials produced, the lack of time in the workload of the teacher to prepare the lab activity, etc. Even in unfavorable or adverse conditions, according Lorenzato (2006), its implementation will benefit teachers and students. The lack of teacher training in their initial and continuing education, to use materials, and the lack of manuals with lab activities are also mentioned as factors that keep teachers from MTL. With propóposito assist the teacher of elementary or middle school in building a theme MTL prepared and we are providing a notebook of activities that provides a didactic sequence involving History and Mathematics. The book consists of four accompanied by suggestions for teachers activities, however the teacher has full autonomy to adapt the activities to the reality of your school. Among the instruments of navigation presented in this study chose to build the quadrant due to its simplicity, low cost of material and great teaching potential that this instrument has. But a theme lab is always being built and rebuilt as it is a research environment
Resumo:
This dissertation describes the construction of a alternative didactic incorporating a historical approach with the use of the Roman abacus for teaching multiplication to students of 2nd year of elementary school, through activities ranging from the representation of numbers to multiplying with the Roman abacus, for learning the multiplication algorithm. Qualitative research was used as a methodological approach since the research object fits the goals of this research mode. Concerning the procedures, the research can be seen as a teaching experiment developed within the school environment. The instruments used for data collection were: observation, logbook, questionnaires, interviews and document analysis. The processing and analysis of data collected through the activities were classified and quantified in tables for easy viewing, interpretation, understanding, analysis of data and then transposed to charts. The analysis confirmed the research objectives and contributed to indicate the pedagogical use of the Roman abacus for teaching multiplication algorithm through several activities. Thus, it can be considered that this educational product will have important contributions for the teaching of this mathematical content, in Basic Education, particularly regarding to the multiplication process
Resumo:
The importance of the Professionals Master in the field of science education is revealed by the recognition that they provide, to practicing teachers, in particular, training spaces for reflection and application of knowledge. This work appears in the context of the project "Research and training in teaching science and mathematics: a cutout of academic production in the northeast and overview of formative action in basic education" on the Centre for Education program, which main objective was to conduct studies description, analysis and evaluation of the academic production of Postgraduate Programs in Science Teaching of UFRPE, UFRN and UEPB and investigate the contribution of continuing education in stricto sensu level, of graduated teachers to improve the quality of basic education . We sought to examine a cut of academic production PPGECNM / UFRN, taking as reference dissertations of Natural Sciences, finished between the years 2005 and 2012, which have developed and applied educational products for high school students. More specifically we sought to conduct a general characterization of the dissertations analyzed for basic descriptors, to understand if and how the official documents governing the Brazilian education, especially science education, subsidized development of dissertations and identify current trends for science teaching are addressed and which ones are used in preparing the product of dissertations. The survey was based on documentary analysis, a type of qualitative approach in which the documents are objects of study in themselves. The results revealed that most of the work was developed in public schools, on subjects of physics and chemistry. During analytical reading of the text of the dissertations was observed that, in its construction, most of them addressed somehow, official documents governing the Brazilian educational system, that the products are basically teaching units and teaching approaches that are more focused on Experimentation and History and Philosophy of Science