Application of electrokinetic Fenton process for the remediation of soil contaminated with HCB

Electrokinetic remediation coupled with Fenton oxidation, widely called as Electrokinetic Fenton process is a potential soil remediation technique used for low permeable soil. The applicability of the process has been proved with soil contaminated with a wide range of organic compounds from phenol to the most recalcitrant ones such as PAHs and POPs. This thesis summarizes the major findings observed during an Electrokinetic Fenton Process study conducted for the remediation of low permeable soil contaminated with HCB, a typical hydrophobic organic contaminant. Model low permeable soil, kaolin, was artificially contaminated with HCB and subjected to Electrokinetic Fenton treatments in a series of laboratory scale batch experiments. The use of cyclodextrins as an enhancement agent to mobilize the sorbed contaminant through the system was investigated. Major process hindrances such as the oxidant availability and treatment duration were also addressed. The HCB degradation along with other parameters like soil pH, redox and cumulative catholyte flow were analyzed and monitored. The results of the experiments strengthen the existing knowledge on electrokinetic Fenton process as a promising technology for the treatment of soil contaminated with hydrophobic organic compounds. It has been demonstrated that HCB sorbed to kaolin can be degraded by the use of high concentrations of hydrogen peroxide during such processes. The overall system performances were observed to be influenced by the point and mode of oxidant delivery. Furthermore, the study contributes to new knowledge in shortening the treatment duration by adopting an electrode polarity reversal during the process.

Process approach in quality management - Case: ECO process development in EMS industry

The aim of the thesis was to study quality management with process approach and to find out how to utilize process management to improve quality. The operating environment of organizations has changed. Organizations are focusing on their core competences and networking with suppliers and customers to ensure more effective and efficient value creation for the end customer. Quality management is moving from inspection of the output to prevention of problems from occurring in the first place and management thinking is changing from functional approach to process approach. In the theoretical part of the thesis, it is studied how to define quality, how to achieve good quality, how to improve quality, and how to make sure the improvement goes on as never ending cycle. A selection of quality tools is introduced. Process approach to quality management is described and compared to functional approach, which is the traditional way to manage operations and quality. The customer focus is also studied, and it is presented, that to ensure long term customer commitment, organization needs to react to changing customer requirements and wishes by constantly improving the processes. In the experimental part the theories are tested in a process improvement business case. It is shown how to execute a process improvement project starting from defining the customer requirements, continuing to defining the process ownership, roles and responsibilities, boundaries, interfaces and the actual process activities. The control points and measures are determined for the process, as well as the feedback and corrective action process, to ensure continual improvement can be achieved and to enable verification that customer requirements are fulfilled.

Laadunhallinta uuden tuotteen tuotekehityksessä

Tämän diplomityön tavoitteena on uuden tuotteen laatusuunnittelun parantaminen Mantsi-nen Group Ltd Oy:n materiaalinkäsittelykoneiden ja -laitteiden tuotekehitysprosessissa, lopputuotteen valmistettavuuden ja laadun varmistamiseksi. Kirjallisuusosiossa on tutki-muksen kohteena tuotekehitysprosessi ja sen yhteydessä käytettävät soveltuvat laatutyöka-lut. Lisäksi työssä tutkitaan ja selvitetään ympäristö-, laadunhallinta- ja hitsausstandardien vaatimuksia tuotekehityksen yhteydessä. Tutkimusosiossa laatutyökaluja sovelletaan ja testataan aktiivisten tuotekehitysprojektin yhteydessä sekä niiden vaikuttavuutta arvioidaan laadun ja läpimenoajan parantamiseen. Ympäristöön, laadunhallintaan ja hitsaukseen liit-tyvien standardivaatimuksien täyttäminen tuotekehitysprosessissa tarkastetaan ja arvioi-daan uudelleen sekä tehdään tarvittavia lisäyksiä ja tarkennuksia. Tutkimuksen tuloksena on parannettu tuotekehitysprosessi, jossa hyödynnetään soveltuvia laatutyökaluja oikea-aikaisesti eri vaiheissa.

Feasibility study of metal to polymer hybrid joining

The increasing demand for lightweight components has led to a huge exploitation of non-metallic materials such as polymers, fibers and elastomers in industrial and manufacturing processes. Recent trends towards cost effectiveness, weight reduction and production flexibility in industrial production and manufacturing processes has led to a growing interest in hybrid components where two or more dissimilar materials coexist to achieving specifically optimized characteristics. The importance of this research is to serve as a bridge to understanding the theories behind various joining techniques and the adaptation of the process for metal to polymer hybrid joints. Moreso, it helps companies to select the most productive and yet economical joining process for realization of lightweight metal to polymer hybrid components. This thesis is a literature review analyzing various materials that has been published on various joining methods for metal to polymer hybrid joints on the feasibility and eventual realization of the joint between these dissimilar materials. This study is aimed at theoretically evaluating the feasibility of joining processes between metal and plastic components by exploiting exhaustively joining and welding sources.

Modelling of calciner in post-combustion carbon capture process

Climate change has given an impetus to research and developed new technologies to reduce significantly carbon dioxide emissions in energy production in the developed countries. The major pollution source, fossil fuels, will be used as an energy source for many decades, which provides the demand for carbon capture and storage technologies. Over recent years many new technologies has been developed and one of the most promising is calcium-looping in post-combustion carbon capture process, which use carbonation-calcination cycle to capture carbon dioxide from the flue gas of a combustion process. First pilot plant for calcium-looping process has been built in Oviedo, Spain. In this study, a three-dimensional model has been created for the calciner, which is one of the two fluidized bed reactors needed for the process. The calciner is a regenerator where the captured carbon dioxide is removed from the calcium material and then collected after the reactor. Thesis concentrates in creating the calciner 3D-model frame with CFB3D-program and testing the model with two different example cases. Used input parameters and calciner geometry are Oviedo pilot plant design parameters. The calculation results give information about the process and show that pilot plant calciner should perform as planned. This Master’s Thesis is done in participation to EU FP7 project CaOling.

Earnings management in the process of preparing corporate financial reports

Earnings management (EM) literature examines managers’ use of judgment in financial reporting and in structuring transactions to alter financial reports for a specific reason. Mainstream EM literature strongly concentrates on statistical research methodologies and it is driven by positive accounting theory. Although EM occurs in the process of preparing corporate financial reports, that process has so far largely remained a “black box” in prior literature. The purpose of this study is to analyze what EM is, how and why it unfolds and how it is intertwined in the process of preparing corporate financial reports. In order to meet the needs of the study, a qualitative case study method will be used. The contribution of this study is threefold. First, it indicates that the concept of EM is not as unam-biguous as the prior literature has assumed. I find that EM is socially constructed and more open to interpretation than absolutely dichotomous conception given by previous studies. Second, this study contributes to our knowledge of the role and the importance of actors involved in conducting EM, indicating that EM is much more actor-dependent than the prior literature has assumed. Third, this study broadens our knowledge base with regard to the processes and potential for EM in academic research.

Laatu ja tuottavuus hitsaavassa verkostossa

Diplomityössä tarkastellaan laadun ja tuottavuuden parantamisen keinoja hitsaavassa verkostossa MIG/MAG-hitsauksen osalta. Työn taustalla vaikuttaa Total Welding Management -menetelmä, mikä on hitsaustoimintojen kokonaisvaltaiseen johtamiseen ja hallintaan kehitetty toimintamalli. Työn teoriaosassa käsitellään laatuajattelua ja yritysyhteistyötä hitsaavan teollisuuden yrityskentässä sekä hitsauskustannuksiin vaikuttavia tekijöitä. Tutkimusosuus sisältää yritysverkoston nykytilan tarkastelun sekä kehitystoimenpiteitä kohti verkoston yhteistä toimintamallia saavuttaa tehokas ja kannattava yhteistyö. Hitsaustyön kustannukset määritetään suurelta osin suunnittelussa. Laatuun voidaan vaikuttaa merkittävästi hitsaustyötä edeltävissä toiminnoissa sekä hitsaajan työn tukemisella. Kokonaisvaltaisen hyödyn saavuttaminen hitsaustyön tuottavuuden parantamisessa vaatii kaikkien toimintojen tarkastelua sen sijaan, että tehostetaan vain hitsaamon toimintaa. Itse hitsaus voi olla vain pieni osa hitsaustoimintojen kokonaishallintaa. Toimintamallin luominen laadunvarmistukseen, suunnittelun ja valmistuksen yhteistyöhön sekä hitsaustoimintojen hallintaan mahdollistaa hitsaavan verkoston toiminnan tehostamisen sekä laadun paranemisen. Tämä saavutetaan viemällä toimintamalli osaksi jokapäiväistä työtä, lähelle valmistusta, ja ohjeistamalla, että jokainen tietää kuinka toimia. Esimerkiksi työssä tarkastellun yhden tuotteen osalta ohjeistus turhan työn vähentämiseksi tuotti 19 % tuotannon kasvun työvuoron aikana. Tilaus-toimitusketjun tuottavuuteen ja kannattavuuteen voidaan vaikuttaa merkittävästi käymällä läpi konkreettisesti valmistettavat tuotteet ja niihin liittyvät toiminnot. Diplomityössä tehtyjen tarkastelujen ja havaintojen avulla käytännön työ tulee jatkumaan yritysverkostossa tapahtuvassa kehitystyössä.

Requirements management process

Vaatimustenhallinnan alue on hyvin kompleksinen. Sen terminologia on moninaista ja samat termit voivat tarkoittaa eri asioita eri ihmisille. Tämän työn tarkoituksena on selkeyttää vaatimustenhallinnan aluetta. Se vastaa kysymyksiin kuten, mitä vaatimustenhallinta on ja miten sitä voidaan tehdä. Työ keskittyy vaatimusten analysoinnin ja validoinnin alueisiin, joten tältä osin se vastaa myös tarkempiin kysymyksiin kuten, miten koottujen vaatimusten jäljitettävyyttä, dokumentointia, analysointia ja validointia voidaan tehdä. Tämän työn kautta vaatimustenhallinta voidaan esitellä yritykselle ja sen eri osat voivat saada saman käsityksen vaatimustenhallinnasta. Tutkimus esittelee vaatimustenhallinnan prosessina, joka pitää sisällään vaatimusten jäljitettävyyden, vaatimusten dokumentoinnin, vaatimusten muutoksenhallinnan ja vaatimusmäärityksen. Vaatimusmääritys voidaan edelleen jakaa vaatimusten koostamiseen, analysointiin ja neuvotteluun sekä validointiin. Työssä esitellään geneerinen vaatimustenhallinnan prosessimalli. Mallin avulla näytetään, että vaatimustenhallinta on jatkuva prosessi, jossa kaikki aktiviteetit ovat kytköksissä toisiinsa. Näitä aktiviteettejä suoritetaan enemmän tai vähemmän samanaikaisesti. Malli esitetään geneerisessä muodossa, jotta se olisi hyödynnettävissä systeemi- ja tuotekehitys projekteissa sekä sisäisissä kehitysprojekteissa. Se kertoo, että vaatimukset tulisi jalostaa niin aikaisin, kuin mahdollista, jotta muutoksien määrä kehitystyön myöhemmissä vaiheissa voitaisiin minimoida. Jotkin muutokset eivät ole vältettävissä, joten muutoksenhallinnan tueksi tulisi kehittää jäljitettävyyskäsikirja ja jäljitettävyyskäytännöt. Vaatimustenhallintaa tarkastellaan meneillään olevassa kehitysprojektissa. Tarkastelussa tutkitaan, mitä vaatimustenhallinnan toimintatapoja sekä analysointi- ja validointimetodeja käytetään ja mitä voitaisiin tehdä vaatimustenhallinnan parantamiseksi projektissa.

A Bridge Builder or a Raconteur? How Japan Manoeuvres the Global Development Discourse within the TICAD Process

Japan has been a major actor in the field of development cooperation for five decades, even holding the title of largest donor of Official Development Assistance (ODA) during the 1990s. Financial flows, however, are subject to pre-existing paradigms that dictate both donor and recipient behaviour. In this respect Japan has been left wanting for more recognition. The dominance of the so called ‘Washington Consensus’ embodied in the International Monetary Fund (IMF) and the World Bank has long circumvented any indigenous approaches to development problems. The Tokyo International Conference on African Development (TICAD) is a development cooperation conference that Japan has hosted since 1993 every five years. As the main organizer of the conference Japan has opted for the leading position of African development. This has come in the wake of success in the Asian region where Japan has called attention to its role in the so called ‘Asian Miracle’ of fast growing economies. These aspirations have enabled Japan to try asserting itself as a major player in directing the course of global development discourse using historical narratives from both Asia and Africa. Over the years TICAD has evolved into a continuous process with ministerial and follow-up meetings in between conferences. Each conference has produced a declaration that stipulates the way the participants approach the question of African development. Although a multilateral framework, Japan has over the years made its presence more and more felt within the process. This research examines the way Japan approaches the paradigms of international development cooperation and tries to direct them in the context of the TICAD process. Supplementing these questions are inquiries concerning Japan’s foreign policy aspirations. The research shows that Japan has utilized the conference platform to contest other development actors and especially the dominant forces of the IMF and the World Bank in development discourse debate. Japan’s dominance of the process is evident in the narratives found in the conference documents. Relative success has come about by remaining consistent as shown by the acceptance of items from the TICAD agenda in other forums, such as the G8. But the emergence of new players such as China has changed the playing field, as they are engaging other developing countries from a more equal level.

Advanced welding technologies used for arctic metal structures

Rapid depletion of easy-to-access fossil fuel, predominantly, oil and gas resources has now necessitated increase in need to develop new oil and gas sources in ever more remote and hostile environments. This is necessary in order to explore more oil and gas resources to meet rapidly rising long-term energy demand in the world, both at present and in the nearest future. Arctic is one of these harsh environments, where enormous oil and gas resources are available, containing about 20% of the world total oil and gas, but the environmental conditions are very harsh and hostile. However, virtually all the facilities required for the exploration and development of this new energy source are constructed with metals as well as their alloys and are predominantly joined together by welding processes and technologies. Meanwhile, due to entirely different environment from the usual moderate temperate region, conventional welding technologies, common metals and their alloys cannot be applied as this Arctic environment demand metals structures with very high toughness and strength properties under extremely low temperature. This is due to the fact that metals transit from ductility to brittleness as the temperature moves toward extreme negative values. Hence, this research work investigates and presents the advanced welding technologies applicable to Arctic metal structures which can give satisfactory weldments under active Arctic service conditions. .

Project Master Document adaption in order fulfillment process

This thesis discusses adaption of new project management tool at ABB Oy Motors and Generators business unit, Synchronous Machines profit centre. Thesis studies project modeling in general and buries in the Gate Model used at ABB Synchronous Machines. It is essential to understand Gate Model because this new project management tool, called Project Master Document, is created on the base of the existing project model. Thesis also analyzes goals and structure of Project Master Document in order to ease implementation of this new tool. Project Master Document aims to improved customer order fulfillment by clearing order handover interface. Office process, especially responsibilities and target dates, become also clearer after Master Document implementation. The document is built to be frame for whole order fulfillment process including check points for each gate of project model and updated memos from all project meetings. Furthermore, project progress will be clearly stated by status markings and visualized with colors.

Software Development Process Modeling. Developers Perspective to Contemporary Modeling Techniques

Formal software development processes and well-defined development methodologies are nowadays seen as the definite way to produce high-quality software within time-limits and budgets. The variety of such high-level methodologies is huge ranging from rigorous process frameworks like CMMI and RUP to more lightweight agile methodologies. The need for managing this variety and the fact that practically every software development organization has its own unique set of development processes and methods have created a profession of software process engineers. Different kinds of informal and formal software process modeling languages are essential tools for process engineers. These are used to define processes in a way which allows easy management of processes, for example process dissemination, process tailoring and process enactment. The process modeling languages are usually used as a tool for process engineering where the main focus is on the processes themselves. This dissertation has a different emphasis. The dissertation analyses modern software development process modeling from the software developers’ point of view. The goal of the dissertation is to investigate whether the software process modeling and the software process models aid software developers in their day-to-day work and what are the main mechanisms for this. The focus of the work is on the Software Process Engineering Metamodel (SPEM) framework which is currently one of the most influential process modeling notations in software engineering. The research theme is elaborated through six scientific articles which represent the dissertation research done with process modeling during an approximately five year period. The research follows the classical engineering research discipline where the current situation is analyzed, a potentially better solution is developed and finally its implications are analyzed. The research applies a variety of different research techniques ranging from literature surveys to qualitative studies done amongst software practitioners. The key finding of the dissertation is that software process modeling notations and techniques are usually developed in process engineering terms. As a consequence the connection between the process models and actual development work is loose. In addition, the modeling standards like SPEM are partially incomplete when it comes to pragmatic process modeling needs, like light-weight modeling and combining pre-defined process components. This leads to a situation, where the full potential of process modeling techniques for aiding the daily development activities can not be achieved. Despite these difficulties the dissertation shows that it is possible to use modeling standards like SPEM to aid software developers in their work. The dissertation presents a light-weight modeling technique, which software development teams can use to quickly analyze their work practices in a more objective manner. The dissertation also shows how process modeling can be used to more easily compare different software development situations and to analyze their differences in a systematic way. Models also help to share this knowledge with others. A qualitative study done amongst Finnish software practitioners verifies the conclusions of other studies in the dissertation. Although processes and development methodologies are seen as an essential part of software development, the process modeling techniques are rarely used during the daily development work. However, the potential of these techniques intrigues the practitioners. As a conclusion the dissertation shows that process modeling techniques, most commonly used as tools for process engineers, can also be used as tools for organizing the daily software development work. This work presents theoretical solutions for bringing the process modeling closer to the ground-level software development activities. These theories are proven feasible by presenting several case studies where the modeling techniques are used e.g. to find differences in the work methods of the members of a software team and to share the process knowledge to a wider audience.