Spectrometrical Monitoring of Laser Sintering Process of Ceramic Material

This thesis is done as a part of project called FuncMama that is a project between Technical Research Centre of Finland (VTT), Oulu University (OY), Lappeenranta University of Technology (LUT) and Finnish industrial partners. Main goal of the project is to manufacture electric and mechanical components from mixed materials using laser sintering. Aim of this study was to create laser sintered pieces from ceramic material and monitor the sintering event by using spectrometer. Spectrometer is a device which is capable to record intensity of different wavelengths in relation with time. In this study the monitoring of laser sintering was captured with the equipment which consists of Ocean Optics spectrometer, optical fiber and optical lens (detector head). Light from the sintering process hit first to the lens system which guides the light in to the optical fibre. Optical fibre transmits the light from the sintering process to the spectrometer where wavelengths intensity level information is detected. The optical lens of the spectrometer was rigidly set and did not move along with the laser beam. Data which was collected with spectrometer from the laser sintering process was converted with Excel spreadsheet program for result’s evaluation. Laser equipment used was IPG Photonics pulse fibre laser. Laser parameters were kept mainly constant during experimental part and only sintering speed was changed. That way it was possible to find differences in the monitoring results without fear of too many parameters mixing together and affecting to the conclusions. Parts which were sintered had one layer and size of 5 x 5 mm. Material was CT2000 – tape manufactured by Heraeus which was later on post processed to powder. Monitoring of different sintering speeds was tested by using CT2000 reference powder. Moreover tests how different materials effect to the process monitoring were done by adding foreign powder Du Pont 951 which had suffered in re-grinding and which was more reactive than CT2000. By adding foreign material it simulates situation where two materials are accidently mixed together and it was studied if that can be seen with the spectrometer. It was concluded in this study that with the spectrometer it is possible to detect changes between different laser sintering speeds. When the sintering speed is lowered the intensity level of light is higher from the process. This is a result of higher temperature at the sintering spot and that can be noticed with the spectrometer. That indicates it could be possible to use spectrometer as a tool for process observation and support the idea of having system that can help setting up the process parameter window. Also important conclusion was how well the adding of foreign material could be seen with the spectrometer. When second material was added a significant intensity level raise could be noticed in that part where foreign material was mixed. That indicates it is possible to see if there are any variations in the material or if there are more materials mixed together. Spectrometric monitoring of laser sintering could be useful tool for process window observation and temperature controlling of the sintering process. For example if the process window for specific material is experimentally determined to get wanted properties and satisfying sintering speed. It is possible if the data is constantly recorded that the results can show faults in the part texture between layers. Changes between the monitoring data and the experimentally determined values can then indicate changes in the material being generated by material faults or by wrong process parameters. The results of this study show that spectrometer could be one possible tool for monitoring. But to get in that point where this all can be made possible much more researching is needed.

Uso do solo na zona ripária de bacias agrícolas de pequeno a médio porte

As zonas ripárias situam-se às margens dos sistemas de drenagens de águas superficiais, afetando processos hidrológicos. O Código Florestal Brasileiro estabelece um afastamento mínimo ao longo dos cursos de águas, considerado como área de preservação permanente. Este trabalho objetivou determinar a distribuição do uso do solo em bacias agrícolas com várias dimensões para diferentes afastamentos em relação ao sistema de drenagem de águas superficiais. A metodologia utilizada compreendeu o uso de imagens do satélite SPOT-5, para classificação do uso de solo em seis bacias com áreas variando de 14 a 600 km². A precisão da classificação foi determinada pela acuracidade e o nível de acerto, determinado pelo coeficiente Kappa. A partir do sistema de drenagem foram traçadas linhas paralelas aos cursos de águas, denominados buffers, com afastamento das margens de 20, 30, 50, 100 e 200 m. Em cada buffer foi determinada a distribuição da ocupação do uso do solo. Os valores obtidos com a classificação indicaram acerto com coeficiente Kappa médio de 0,96. Os temas classificados em todas as imagens apresentaram boa acuracidade, com valores maiores que 96%. Os resultados apontaram que o uso da terra predominante em todas as bacias é a mata nativa com valores médios de 46,8%, seguida de culturas agrícolas com 24,7% e pastagens com 21,7%. As áreas de matas nativas apresentavam tendência de redução à medida que se afastavam dos cursos de água, enquanto os reflorestamentos tendiam a aumentar o percentual da área ocupada com o afastamento das margens dos rios.

Análise morfométrica e socioambiental de uma bacia hidrográfica Amazônica, Carlinda, MT

Estudos morfométricos e socioambientais foram realizados na bacia hidrográfica do rio Monte Sinai, em Carlinda, MT, visando à criação de subsídios para a sua sustentabilidade ambiental. Para tanto, foram utilizados dados SRTM 90 m, reamostrados para 30 m, para a geração do modelo digital de elevação e dados SPOT (10 m), para a avaliação do uso e cobertura da terra, através de técnicas de SIG. Além disso, foram feitas entrevistas semiestruturadas com os moradores locais e visitas de campo. Os resultados apontaram que a bacia apresenta padrão dentrítico de quarta ordem. A razão altimétrica, declividade, densidade de drenagem e fator de forma indicaram forte controle estrutural da drenagem da bacia hidrográfica. Entretanto, o atual uso e cobertura da terra, dominada por pastagens e mata ciliar degradada, favorecem os processos erosivos e, consequentemente, a perda da ferlitiladade do solo e o assoreamento dos cursos d'água. Foram apontados indicadores de degradação, assim como estratégias de manejo adequadas à melhoria ambiental que venham contribuir e garantir a sustentabilidade ambiental da bacia.

From Fluid Dynamics to Human Psychology.What Drives Financial Markets Towards Extreme Events

For decades researchers have been trying to build models that would help understand price performance in financial markets and, therefore, to be able to forecast future prices. However, any econometric approaches have notoriously failed in predicting extreme events in markets. At the end of 20th century, market specialists started to admit that the reasons for economy meltdowns may originate as much in rational actions of traders as in human psychology. The latter forces have been described as trading biases, also known as animal spirits. This study aims at expressing in mathematical form some of the basic trading biases as well as the idea of market momentum and, therefore, reconstructing the dynamics of prices in financial markets. It is proposed through a novel family of models originating in population and fluid dynamics, applied to an electricity spot price time series. The main goal of this work is to investigate via numerical solutions how well theequations succeed in reproducing the real market time series properties, especially those that seemingly contradict standard assumptions of neoclassical economic theory, in particular the Efficient Market Hypothesis. The results show that the proposed model is able to generate price realizations that closely reproduce the behaviour and statistics of the original electricity spot price. That is achieved in all price levels, from small and medium-range variations to price spikes. The latter were generated from price dynamics and market momentum, without superimposing jump processes in the model. In the light of the presented results, it seems that the latest assumptions about human psychology and market momentum ruling market dynamics may be true. Therefore, other commodity markets should be analyzed with this model as well.

Data mining techniques for identification of spectrally homogeneous areas using NDVI temporal profiles of soybean crop

The aim of this study was to group temporal profiles of 10-day composites NDVI product by similarity, which was obtained by the SPOT Vegetation sensor, for municipalities with high soybean production in the state of Paraná, Brazil, in the 2005/2006 cropping season. Data mining is a valuable tool that allows extracting knowledge from a database, identifying valid, new, potentially useful and understandable patterns. Therefore, it was used the methods for clusters generation by means of the algorithms K-Means, MAXVER and DBSCAN, implemented in the WEKA software package. Clusters were created based on the average temporal profiles of NDVI of the 277 municipalities with high soybean production in the state and the best results were found with the K-Means algorithm, grouping the municipalities into six clusters, considering the period from the beginning of October until the end of March, which is equivalent to the crop vegetative cycle. Half of the generated clusters presented spectro-temporal pattern, a characteristic of soybeans and were mostly under the soybean belt in the state of Paraná, which shows good results that were obtained with the proposed methodology as for identification of homogeneous areas. These results will be useful for the creation of regional soybean "masks" to estimate the planted area for this crop.

Mapping of use and occupation of the soil and irrigation water quality in the city of Salto do Lontra-Paraná, Brazil

The objective of this study consisted on mapping the use and soil occupation and evaluation of the quality of irrigation water used in Salto do Lontra, in the state of Paraná, Brazil. Images of the satellite SPOT-5 were used to perform the supervised classification of the Maximum Likelihood algorithm - MAXVER, and the water quality parameters analyzed were pH, EC, HCO3-, Cl-, PO4(3-), NO3-, turbidity, temperature and thermotolerant coliforms in two distinct rainfall periods. The water quality data were subjected to statistical analysis by the techniques of PCA and FA, to identify the most relevant variables in assessing the quality of irrigation water. The characterization of soil use and occupation by the classifier MAXVER allowed the identification of the following classes: crops, bare soil/stubble, forests and urban area. The PCA technique applied to irrigation water quality data explained 53.27% of the variation in water quality among the sampled points. Nitrate, thermotolerant coliforms, temperature, electrical conductivity and bicarbonate were the parameters that best explained the spatial variation of water quality.

Testing Futures Market Efficiency and Optimal Hedge Ratio Estimation: Evidence from Futures and Options on RTS

This study investigates futures market efficiency and optimal hedge ratio estimation. First, cointegration between spot and futures prices is studied using Johansen method, with two different model specifications. If prices are found cointegrated, restrictions on cointegrating vector and adjustment coefficients are imposed, to account for unbiasedness, weak exogeneity and prediction hypothesis. Second, optimal hedge ratios are estimated using static OLS, and time-varying DVEC and CCC models. In-sample and out-of-sample results for one, two and five period ahead are reported. The futures used in thesis are RTS index, EUR/RUB exchange rate and Brent oil, traded in Futures and options on RTS.(FORTS) For in-sample period, data points were acquired from start of trading of each futures contract, RTS index from August 2005, EUR/RUB exchange rate March 2009 and Brent oil October 2008, lasting till end of May 2011. Out-of-sample period covers start of June 2011, till end of December 2011. Our results indicate that all three asset pairs, spot and futures, are cointegrated. We found RTS index futures to be unbiased predictor of spot price, mixed evidence for exchange rate, and for Brent oil futures unbiasedness was not supported. Weak exogeneity results for all pairs indicated spot price to lead in price discovery process. Prediction hypothesis, unbiasedness and weak exogeneity of futures, was rejected for all asset pairs. Variance reduction results varied between assets, in-sample in range of 40-85 percent and out-of sample in range of 40-96 percent. Differences between models were found small, except for Brent oil in which OLS clearly dominated. Out-of-sample results indicated exceptionally high variance reduction for RTS index, approximately 95 percent.

Cirurgia do hiperparatireoidismo

Hyperparathyroidism is a desease caused by increase of parathormone secretion, leading to a misfunction of calcium metabolism. Although not very common among population in general, it is frequently observed in patients with cronic renal disease. It can involve a slight syntomatic form, but as a whole, its main repercurssions occur in skeletic muscles, urinary and intestinal systems. The authors conduct a broad revision of the literature, focusing on the methods of diagnosis and spot checking before and during the operations of parathyroid glands. Surgical recommendations, tatic aspects and types of surgery to be implemented are discussed. A systematization for adequate surgical technics performed at the General Surgery Service of Clementino Fraga Filho Hospital of Federal University of Rio de Janeiro is fully discribed and recommended.

Developing a non-public research software for public use

EasyLEED is a program designed for the extraction of intensity-energy spectra from low-energy electron diffraction patterns. It can be used to get information about the position of individual atoms on a surface of some substance. The goal of this thesis is to make easyLEED useful in LEED-research. It is achieved by adding new features, i.e. plotting intensity-energy spectra, setting tracking parameters and allowing exporting and importing of settings and spot location data, to the program. The detailed description of these added features and how they’re done and how they impact on the usefulness of the program in research are presented in this thesis. Improving the calculational part of the program is not discussed.

Eri laskentamenetelmien vertailu hitsatun rakenteen väsymislaskennassa

Tässä työssä tutkittiin eri mitoitusmenetelmien soveltuvuutta hitsattujen rakenteiden vä-symislaskennassa. Käytetyt menetelmät olivat rakenteellinen jännityksen menetelmä, te-hollisen lovijännityksen menetelmä ja murtumismekaniikka. Lisäksi rakenteellisen jänni-tyksen määrittämiseksi käytettiin kolmea eri menetelmää. Menetelmät olivat pintaa pitkin ekstrapolointi, paksuuden yli linearisointi ja Dongin menetelmä. Väsymiskestävyys määritettiin kahdelle hitsiliitoksen yksityiskohdalle. Laskenta tehtiin käyttäen elementtimenetelmää rakenteen 3D-mallille. Tutkittavasta aggregaattirungosta oli olemassa FE-malli mutta alimallinnustekniikkaa hyödyntämällä pystyttiin yksityiskohtai-semmin tutkimaan vain pientä osaa koko rungon mallista. Rakenteellisen jännityksen menetelmä perustuu nimellisiin jännityksiin. Kyseinen mene-telmä ei vaadi geometrian muokkausta. Yleensä rakenteellisen jännityksen menetelmää käytetään hitsin rajaviivan väsymislaskennassa, mutta joissain tapauksissa sitä on käytetty juuren puolen laskennassa. Tässä työssä rakenteellisen jännityksen menetelmää käytettiin myös juuren puolen tutkimisessa. Tehollista lovijännitystä tutkitaan mallintamalla 1 mm fiktiiviset pyöristykset sekä rajaviivalle että juuren puolelle. Murtumismekaniikan so-veltuvuutta tutkittiin käyttämällä Franc2D särön kasvun simulointiohjelmaa. Väsymislaskennan tulokset eivät merkittävästi poikkea eri laskentamenetelmien välillä. Ainoastaan rakenteellisen jännityksen Dongin menetelmällä saadaan poikkeavia tuloksia. Tämä johtuu pääasiassa siitä, että menetelmän laskentaetäisyydestä ei ole tietoa. Raken-teellisen jännityksen menetelmällä, tehollisen lovijännityksen menetelmällä ja murtumis-mekaniikalla saadaan samansuuntaiset tulokset. Suurin ero menetelmien välillä on mal-linnuksen ja laskennan vaatima työmäärä.

Kuormanohjauksen vaikutus kaksion sähkönkulutuskäyrään

Tutkimuksen tarkoituksena oli selvittää millainen kaksion sähkönkulutuskäyrä on ja mistä kuormista se koostuu. Tarkoituksena oli myös tutkia miten kuormansiirrot vaikuttavat sähkönkulutuskäyrään ja onko kuormansiirroissa säästöpotentiaalia ajatellen asiakkaan sähkökustannuksia. Säästöpotentiaalia laskettaessa oletettiin, että asiakkaalla on sähkösopimus, jonka hinta seuraa sähköpörssin (Nord Pool) spot-hintoja. Tutkimustuloksista nähdään, että asunnon pohjakuorma aiheutuu kylmälaitteista ja suuret sähkön kulutuspiikit aiheutuvat liedestä, astianpesukoneesta ja pyykinpesukoneesta. Kuormansiirtojen vaikutus normaaliin sähkönkulutus käyrään on se, että suurten kuormien aiheuttamat kulutuspiikit siirtyivät myöhemmäksi iltaan. Laskelmissa selvisi, että kuormansiirto ei tuo asiakkaalle merkittäviä säästöjä, koska säästöjen saanti edellyttäisi pidempiä mittausjaksoja sekä päivittäisiä suuria hinnanvaihteluita sähkön spot-hinnoissa. Tutkittiin myös millaisia kylmälaitteiden kulutuskäyrät ovat ja miten pysäytykset ja uudelleenkäynnistyksen vaikuttavat niihin.

Etäluentamittareiden tuomat tuotteistamismahdollisuudet sähkönmyyjille

Diplomityön tavoitteena oli selvittää etäluentamittareiden mahdollistamia tuotteita ja palveluita sekä niiden toteutettavuutta Mäntsälän Sähkö Oy:ssä. Työssä perehdytään yksityisasiakkaille suunnattuihin palveluihin, joita mittaritekniikka mahdollistaa. Mittarit tulee olla asennettuna 80%:lle verkkoyhtiön sähkönkäyttöpaikoista vuoteen 2014 mennessä. Mäntsälän Sähköllä mittareiden vaihtoprojektin alkamisen vuoksi haluttiin selvittää mahdollisten uusien tuotteiden toteutettavuutta. Työssä esitellään Mäntsälän Sähkö Oy:lle tulevan mittarijärjestelmän. Mittarijärjestelmä käyttää eri tietoliikennetapoja, jotka ovat GPRS, RS485 ja radio. Työ sisältää internet-paneelina suoritetun asiakaskyselyn, jossa selvitettiin asiakkaiden tarpeita ja mielipiteitä mahdollisten uusien tuotteiden osalta. Työssä käsiteltäviä tuotteita ovat kuormanohjaus, kysynnän hintajousto, spot-hinnoittelu, laskutus sekä raportointipalvelu. Kulutuksen hintajousto, kuormanohjaus ja spot-hinnoittelu toimivat toisiaan tukevina tuotteina. Tasasuuruista laskutusta voisi tarjota toteutuneen kulutuksen mukaisen laskutuksen ohessa lisäpalveluna. Raportointipalvelu internetissä on hyvä tapa toimittaa asiakkaalle lain velvoittamat tiedot.

The sources of complementary competitive advantages for systems’ manufacturers in the aircraft modernization market

Being a top of high technology industries, the aerospace represents one of the most complex fields of study. While the competitiveness of aircraft systems’ manufacturers attracts a significant number of researchers, some of the issues remain to be a blank spot. One of those is the after-sale modernization. The master thesis investigates how this concept is related to the theory of competitive advantages. Finding the routes in the framework of complex technological systems’ lifecycle, the key drivers of the aircraft modernization market are revealed. The competitive positioning of players is defined through multiple case studies in a form of several in-depth interviews. The key result of the research is the conclusion that modernization should be considered as an inherent component of strategy of any aircraft systems’ manufacturer, while the master thesis aims to support managerial decision making.

Laser-TIG hybrid welding process

Joining processes and techniques need to meet the trend of new applications and the development of new materials. The application in connection with thick and thin plates in industrial fields is wide and the joining technology is in very urgent need. The laser-TIG hybrid welding technology can play the respective advantages of both of them. One major advantage of the hybrid laser-TIG welding technology is its efficient use of laser energy. Additionally, it can develop into a high and new advanced welding technology and become a hot spot in both the application and research area. This thesis investigated laser –TIG hybrid welding with the aim of enlightening the reader on its advantages, disadvantages and future areas of improvement. The main objective is to investigate laser-TIG hybrid on the welding of various metals (steels, magnesium, aluminium etc.). In addition, it elaborates on various possible combinations on hybrid laser-TIG welding technology and their benefits. The possibility of using laser-TIG hybrid in welding of thick materials was investigated. The method applied in carrying out this research is by using literature review. The results showed that hybrid laser-TIG is applicable to almost all weldable metals. Also it proves to be effective in welding refractive metals. The possibility of welding with or without filler materials is of economic advantage especially in welding of materials with no filler material. Thick plate’s hybrid laser-TIG welding is showing great prospects although it normally finds its used in welding thin materials in the range of 0.4 to 0.8 mm. The findings show that laser-TIG hybrid welding can be a versatile welding process and therefore will be increasingly used industrially due to its numerous advantages and the development of new TIG arc that enhances its capabilities.

Eficácia do fipronil em cães infestados com diferentes cargas parasitárias de Ctenocephalides felis felis (Siphonaptera: Pulicidae)

O objetivo do trabalho foi avaliar através de teste in vivo, a eficácia e o período residual de proteção do fipronil 10% "top spot" em cães infestados com diferentes cargas parasitárias de Ctenocephalides felis felis. Foram utilizados 24 cães da raça Beagle, compondo seis animais por grupo. Os cães foram divididos em quatro grupos. Os cães dos grupos controles I e II não receberam tratamento, enquanto que os cães dos grupos tratados I e II receberam tratamento com formulação de fipronil 10% "top spot". Os cães dos grupos controle I e tratado I foram infestados com 100 pulgas adultas não alimentadas, e os cães dos grupos controle II e tratado II foram infestados com 300 pulgas adultas não alimentadas. As infestações foram realizadas nos dias, -2, +5, +12, +19, +26, +33 e +40 e nos dias +2, +7, +14, +21, +28, +35 e +42 foi realizada retirada mecânica e contagem de pulgas para avaliação. As eficácias pulguicidas, para o grupo tratado I, nos dias +2, +7, +14, +21, +28, +35 e +42, foram respectivamente 99,36%; 99,73%; 99,48%; 99,74%; 99,75%; 95,06% e 67,62%. As eficácias pulguicidas, para o grupo tratado II, avaliadas nos mesmos dias, foram respectivamente 100%; 100%; 100%; 100%; 99,91%; 95,60% e 68,55%. O fipronil mostrou-se eficaz na eliminação das pulgas em cães até o dia +35. A análise estatística comparativa entre as médias de pulgas vivas, entre os grupos controle I e tratado I, demonstrou que ocorreu diferença significativa (p≤0,05) para os desafios em todos os dias experimentais, após o tratamento. Os grupos controle II e tratado II também apresentaram diferença significativa (p≤0,05) para os desafios em todos os dias experimentais, após o tratamento. A análise estatística entre os grupos tratados I e II demonstrou que não ocorreu diferença significativa (p≥0,05) para os desafios em todos os dias experimentais. O desafio foi encerrado no dia +42 já que a eficácia do fipronil nos grupos tratados I e II foram inferiores 70%. O produto em teste mostrou-se eficaz na eliminação das pulgas em cães até o dia + 35, não apresentando mais efeito residual de proteção quando os animais foram reinfestados. Não houve diferença significativa nos níveis de eficácia entre os grupos infestados com 100 e 300 exemplares adultos de C. felis felis ao longo do período experimental.