Non-wood massojen vedenpoiston arvioiminen märkäpuristuksessa

Yksivuotisten kasvien (non-wood) kuitua verrataan usein lehtipuukuituihin. Käytetyimpiä non-wood kasveja ovat vehnän olki, bambu, järviruoko ja bagassi. Non-wood massan erottaa puumassasta kuitenkin korkea silikaattipitoisuus sekä parenkyymisolupitoisuus, joka antaa massalle korkean hienoainepitoisuuden. Tämä yhdessä korkean hemiselluloosapitoisuuden ja lyhyen kuidun pituuden kanssa heikentävät voimakkaasti non-wood massan vedenpoisto-ominaisuuksia. Non-wood kuidulla voidaan korvata lehtipuumassaa hienopapereissa. Non-wood kuitu antaa paperille hyvän opasiteetin, korkean valonsirontakertoimen sekä sileän painopinnan. Massaan lisättävä pitkäkuituinen havupuumassa parantaa ajetta¬vuutta paperikoneella ja helpottaa massan vedenpoistoa. Non-wood massan vedenpoistoa voidaan tehostaa esimerkiksi poistamalla osa hienoaineesta, käyttämällä non-wood massalle sopivaa keittotapaa sekä käyttämällä märkä¬puristuksessa pitkänippityyppistä puristinratkaisua. Myös non-wood kuidun kuivaaminen parantaa vedenpoistoa. Tässä tutkimuksessa kirjallisuusosassa keskityttiin yleisimpiin paperin valmistuksessa käytettäviin non-wood kuidun lähteisiin, märkäpuristuksen teoriaan ja tapoihin tehostaa vedenpoistoa. Kokeellisessa osassa tutkittiin vehnänolkimassan käyttäytymistä märkäpuristuksessa erilaisten ominaisuuksien pohjalta. Tutkimuksen kohteena oli non-wood massan keittotapa (hapan/alkali), hienoainepitoisuus, silikaattipitoisuus sekä kuivattu/kuivaamaton kuitu. Vertailun vuoksi tutkimuksessa oli mukana myös yksi järviruokomassa. Tuloksista huomataan, että non-wood massan vedenpoistoon vaikuttaa hienoainepitoisuus, kuidun kuivaus sekä massan valmistustapa. Järviruokomassan veden¬poisto on tehokkaampaa kuin vehnänolkimassan paremman kuitu¬koostumuksensa takia. Jos hienopaperimassassa korvataan lehtipuumassaa non-wood kuidulla maksimissaan 40 %, massan vedenpoistoa voidaan hyvin arvioida erilaisten suotautuvuusmittojen, kuten freeneksen, vedenpidätyskyvyn ja suotautumisajan, avulla.

Deinking flotation of recycled linerboard for food packaging applications

Brown packaging linerboard, made entirely from recovered pulp, was subjected to deinking flotation for evaluating the possible improvements in its chemical, optical and mechanical properties. The increase in the rate of recovered paper utilisation, along with the tendency towards lower basis weights, in the packaging paper production, has created a growing need for the utilisation of secondary fibers of improved quality. To attain better quality fibers, flotation deinking of brown grades is being considered, along with the addition of primary fibers to recovered paper furnish. Numerous conducted studies, in which the flotation technology was used in the treatment of brown grades, support this idea. Most of them show that the quality of fibers is improved after flotation deinking, resulting in higher mechanical properties of the deinked handsheets and in lower amounts of chemical contaminants. As to food and human health safety, packaging paper has to meet specific requirements, to be classified as suitable for its direct contact with foods. Recycled paper and board may contain many potential contaminants, which, especially in the case of direct food contact, may migrate from packaging materials into foodstuffs. In this work, the linerboard sample selected for deinking was made from recycled fibers not submitted previously to chemical deinking flotation. Therefore, the original sample contained many noncellulosic components, as well as the residues of printing inks. The studied linerboardsample was a type of packaging paper used for contact with food products that are usually peeled before use, e.g. fruits and vegetables. The decrease in the amount of chemical contaminants, after conducting deinking flotation, was evaluated, along with the changes in the mechanical and optical properties of the deinked handsheets. Food contact analysis was done on both the original paper samples and the filter pads and handsheets made before and after deinking flotation. Food contact analysis consisted of migration tests of brightening agents, colorants, PCPs, formaldehydes and metals. Microbiological tests were also performed to determine the possible transfer of antimicrobial constituents

GdBaCo2O5+x layered perovskite as an intermediate temperature solid oxide fuel cell cathode

GdBaCo2O5+x (GBCO) was evaluated as a cathode for intermediate-temperature solid oxide fuel cells. A porous layer of GBCO was deposited on an anode-supported fuel cell consisting of a 15m thick electrolyte of yttria-stabilized zirconia (YSZ) prepared by dense screen-printing anda Ni–YSZ cermet as an anode (Ni–YSZ/YSZ/GBCO). Values of power density of 150 mW cm−2 at 700◦C and ca. 250 mW cm−2 at 800◦C are reported for this standard configuration using 5% of H2 in nitrogen as fuel. An intermediate porous layer of YSZ was introduced between the electrolyte and the cathode improving the performance of the cell. Values for power density of 300 mW cm−2 at 700◦C and ca. 500 mW cm−2 at 800◦C in this configuration were achieved.

El impresor Claudio Page durante la Guerra de Sucesión en Xàtiva y Alacant

Claudio Page tuvo un taller de imprenta en plena Guerra de Sucesión. Tras llegar a Xàtiva en 1702 e imprimir un impreso en 1702 y cinco en 1704, desapareció. El siguiente rastro con que contamos es su llegada a Alacant donde imprimió en 1713 y 1714 un total de cinco impresos. La actividad de este impresor local reflejó los intereses de los cabildos, eclesiástico y civil, que lograron la instalación de una imprenta (y también librería) que podía abastecer los amplios territorios controlados por el municipio. Era un impresor sobre el que apenas se conocían datos, y del que no se sabía cuál había sido su producción. En este trabajo se reconstruye su trayectoria y se analizan los impresos, lo que nos ha permitido detectar la continuidad del material tipográfico utilizado en Xàtiva y Alacant. Los impresos indican unos usos ligados a los intereses más directos de las comunidades locales: por una parte la comunicación de las actividades de la Corona, la gestión administrativa de los cabildos, tanto civil como eclesiástico, pero además contribuyó a promover las actividades de las órdenes y los particulares que contaron con un medio muy útil para promocionar sus causas judiciales.

A lower bound in Nehari's theorem on the polydisc

By theorems of Ferguson and Lacey ($d=2$) and Lacey and Terwilleger ($d>2$), Nehari's theorem is known to hold on the polydisc $\D^d$ for $d>1$, i.e., if $H_\psi$ is a bounded Hankel form on $H^2(\D^d)$ with analytic symbol $\psi$, then there is a function $\varphi$ in $L^\infty(\T^d)$ such that $\psi$ is the Riesz projection of $\varphi$. A method proposed in Helson's last paper is used to show that the constant $C_d$ in the estimate $\|\varphi\|_\infty\le C_d \|H_\psi\|$ grows at least exponentially with $d$; it follows that there is no analogue of Nehari's theorem on the infinite-dimensional polydisc.

La fureur divine et son détournement en Nb 25

The story Numbers of 25 which reports the incident of Baal Peor is one among several texts in the book of Numbers focusing on divine wrath, its cause and its consequences. The present article offers a detailed analysis of the account which is difficult to understand because of certain jumps in the plot and because of its allusive style. Scholars mostly agree with the idea that the story grew in two or three stages. A lot of commentators believe that the original story contains only the apostasy of Peor caused by the Moabites (vv. 1-5). A subsequent story would focus on Pinchas' action against Zimri and Kospi, and a third layer is linked to the story of the war between Israel and Midian (Numbers 31). The problem of this theory however is that it seems impossible to reconstruct an original story about the matter of Peor; one does not find a satisfying end within vv. 1-5. Furthermore, v. 5, which belongs to the first, "Moabite", section, is already linked to the theme of Midian which dominates the second and the third passage. Moreover, the assemblage of different themes and motifs seem having been done with care: Regarding the two abuses of Israel reported in the story--idolatry and intermarriage--, they often go together in late polemical Deuteronomistic and post-Deuteronomistic layers (Ezra-Nehemiah). The double focus on Midian and Moab could both be polemically directed against certain Moses traditions found in the books of Exodus and Deuteronomy (concerning Moses' marriage with a Midianite women on the one hand and his stay and death and burial in Moab - in the vicinity of Beth Peor - on the other hand). As in several ANE traditions also in the Hebrew Bible the motif of "divine wrath" serves to interpret fatal historical events; in Num 25 as in other Biblical stories however it is doubtful whether the alleged incident (the plague) really have taken place and the story's plot is anchored in ancient Israel's history.

Elaborated Literary Violence: Genre and Ideology of the Two Stories I Sam 22,6-23 and II Sam 21,1-14

The present article focuses on two stories dealing with acts of big blood shed. I Sam 22,6-23 relates the massacre of the priests of Nob; II Sam 21,1-14 is about the execution of seven descendents of Saul, as atonement for Saul's attempt to exterminate the Gibeonites. Most researchers consider both stories or at least certain parts of them old.1 For both stories few verses are regarded as secondary. In this paper I try to reassess the analysis of these stories and will point to indices favoring a late date of origin for both of them. They concern the language in use, intertextual connections and particular motifs. A further indication consists in the fact that the reported events of the stories lack significant resonance in the corpus of the Hebrew Bible. There are only two texts, I Sam 2,33 and Ps 52,2, which allude or refer to I Sam 22,6-23.With regard to the importance of the related events and acts this silence in the Biblical context is astonishing. Interestingly, also in the Book of Chronicles one does not find any allusions to these stories. This raises the question whether the latter were composed after the formation of the book of Chronicles.

La traducció del Càntic dels Càntics de Carles Riba

Carles Riba’s activity as a translator of Greek classics (Xenophon, Plutarch, Homer, Sophocles, Euripides, Aeschylus) and works of important authors who wrote in Latin (Virgil), English (Edgar A. Poe) and German (Rilke, Hölderlin) is well known and has been widely studied. In contrast, the great humanist’s translations of books of the Bible -Song of Songs and the Book of Ruth- from Hebrew to Catalan have never been the subject of a monographic study. This piece of work is an edition and a detailed analysis of his version of the Song of Solomon. The notes in the text point out the translator’s contributions and uncertainties in a work published at a pivotal time in the Catalan language’s history

Hardcopy quality parameters to ensure structures detection at digital mammography

Objective To develop procedures to ensure consistency of printing quality of digital images, by means of hardcopy quantitative analysis based on a standard image. Materials and Methods Characteristics of mammography DI-ML and general purpose DI-HL films were studied through the QC-Test utilizing different processing techniques in a FujiFilm®-DryPix4000 printer. A software was developed for sensitometric evaluation, generating a digital image including a gray scale and a bar pattern to evaluate contrast and spatial resolution. Results Mammography films showed maximum optical density of 4.11 and general purpose films, 3.22. The digital image was developed with a 33-step wedge scale and a high-contrast bar pattern (1 to 30 lp/cm) for spatial resolution evaluation. Conclusion Mammographic films presented higher values for maximum optical density and contrast resolution as compared with general purpose films. The utilized digital processing technique could only change the image pixels matrix values and did not affect the printing standard. The proposed digital image standard allows greater control of the relationship between pixels values and optical density obtained in the analysis of films quality and printing systems.

Capçal extrusor per a un sistema de tecnologia additiva

El departament de GREP de la UdG disposa d’un sistema de tecnologia additiva, laFab@home model 1, una impressora 3D o també anomenada de prototipat ràpid. Ésuna màquina de dimensions reduïdes, versàtil i de cost reduït, que a partir d’un modelgenerat a CAD, es capaç de fabricar objectes sòlids tridimensionals mitjançant lasuperposició de capes horitzontals.Les impressores 3D neixen de la necessitat de realitzar, en un temps relativament curt,proves de geometries complexes, que executades en un procés de manofacturaciónormal pot ser llarg i d’elevat cost.Gran part de les màquines de característiques similars a la Fab@home, tenen modelspreparats fabricar / extrudir peces a partir de silicones, aliments o polímers. Ara bé, laconformació per extrusió de plàstic és a partir de polímer verge en forma de fil.El present projecte té l’objectiu de dissenyar un sistema de conformació que permetimanufacturar polímer en forma de gra i s’adapti al funcionament de la Fab@home, amb l’argot corresponent, es tracta d’adaptar la Fab@home al fused depositionmodeling (FDM)

Passat i present de la impremta escolar i els llibres de vida: les tècniques Freinet a l’Estat espanyol a propòsit d’algunes publicacions recents

Les darreres publicacions sobre els inicis de les tècniques Freinet a les escoles de l’Estat espanyol són una bona oportunitat per conèixer les aportacions dels mestres que van apostar per una renovació pedagògica, i posen de manifest la vigència de les pràctiques del pedagog Célestin Freinet. La nostra aportació recull i relaciona les idees principals d’alguns dels estudis recents sobre les tècniques Freinet, relacionades amb l’aprenentatge del llenguatge, amb l’objectiu de ressenyar alguns aspectes importants de les investigacions i fer un breu repàs a la figura dels mestres que impulsaren l’ús de la impremta a l’escola, la creació de les revistes escolars i els llibres de vida a l’Estat espanyol. Propostes basades en la manipulació, el tempteig experimental, la necessitat d’expressió de l’infant, el foment de la reflexió lingüística i la creativitat, que van renovar l’enfocament de l’aprenentatge de la lectura i l’escriptura i que es reivindiquen com a pràctiques útils actualment. Es pretén contribuir a la difusió del valuós llegat dels mestres que van creure en una escola renovada i, al mateix temps, a la recuperació de les bases del seu ideari pedagògic. La vitalitat de les recerques actuals és una mostra del creixent interès per recuperar les aportacions de Freinet, per conèixer el nostre passat i poder reflexionar sobre la millora de la pràctica docent present i de futur.

Deposition and characterization of lines printed through laser-induced forward transfer

The possibility of printing two-dimensional micropatterns of biomolecule solutions is of great interest in many fields of research in biomedicine, from cell-growth and development studies to the investigation of the mechanisms of communication between cells. Although laser-induced forward transfer (LIFT) has been extensively used to print micrometric droplets of biological solutions, the fabrication of complex patterns depends on the feasibility of the technique to print micron-sized lines of aqueous solutions. In this study we investigate such a possibility through the analysis of the influence of droplet spacing of a water and glycerol solution on the morphology of the features printed by LIFT. We prove that it is indeed possible to print long and uniform continuous lines by controlling the overlap between adjacent droplets. We show how, depending on droplet spacing, several printed morphologies are generated, and we offer, in addition, a simple explanation of the observed behavior based on the jetting dynamics characteristic of the LIFT of liquids.

Eletrodos fabricados por "silk-screen"

A review dealing with the use of screen-printing technology to manufacture disposable electrodes is presented, covering in details virtually all the publications in the area up to early 1997 and including 206 references. The elements and different strategies on constructing modified electrodes are highlighted. Commercial and Home-made ink recipes are discussed. Microelectrode arrays, built by the combination of photostructuring and screen-printing technologies to the mass production of advanced disposable sensors, are also discussed. Future research trends are predicted.

Determination of compression behaviour of coating layer

The strength properties of paper coating layer are very important in converting and printing operations. Too great or low strength of the coating can affect several problems in printing. One of the problems caused by the strength of coating is the cracking at the fold. After printing the paper is folded to final form and the pages are stapled together. In folding the paper coating can crack causing aesthetic damage over printed image or in the worst case the centre sheet can fall off in stapling. When folding the paper other side undergoes tensile stresses and the other side compressive stresses. If the difference between these stresses is too high, the coating can crack on the folding. To better predict and prevent cracking at the fold it is good to know the strength properties of coating layer. It has measured earlier the tensile strength of coating layer but not the compressive strength. In this study it was tried to find some way to measure the compressive strength of the coating layer and investigate how different coatings behave in compression. It was used the short span crush test, which is used to measure the in-plane compressive strength of paperboards, to measure the compressive strength of the coating layer. In this method the free span of the specimen is very small which prevent buckling. It was measured the compressive strength of free coating films as well as coated paper. It was also measured the tensile strength and the Bendtsen air permeance of the coating film. The results showed that the shape of pigment has a great effect to the strength of coating. Platy pigment gave much better strength than round or needle-like pigment. On the other hand calcined kaolin, which is also platy but the particles are aggregated, decreased the strength substantially. The difference in the strength can be explained with packing of the particles which is affecting to the porosity and thus to the strength. The platy kaolin packs up much better than others and creates less porous structure. The results also showed that the binder properties have a great effect to the compressive strength of coating layer. The amount of latex and the glass transition temperature, Tg, affect to the strength. As the amount of latex is increasing, the strength of coating is increasing also. Larger amount of latex is binding the pigment particles better together and decreasing the porosity. Compressive strength was increasing when the Tg was increasing because the hard latex gives a stiffer and less elastic film than soft latex.

Characterisation of pigment particles by scanning electron microscope and image analysis programs

Coating and filler pigments have strong influence to the properties of the paper. Filler content can be even over 30 % and pigment content in coating is about 85-95 weight percent. The physical and chemical properties of the pigments are different and the knowledge of these properties is important for optimising of optical and printing properties of the paper. The size and shape of pigment particles can be measured by different analysers which can be based on sedimentation, laser diffraction, changes in electric field etc. In this master's thesis was researched particle properties especially by scanning electron microscope (SEM) and image analysis programs. Research included nine pigments with different particle size and shape. Pigments were analysed by two image analysis programs (INCA Feature and Poikki), Coulter LS230 (laser diffraction) and SediGraph 5100 (sedimentation). The results were compared to perceive the effect of particle shape to the performance of the analysers. Only image analysis programs gave parameters of the particle shape. One part of research was also the sample preparation for SEM. Individual particles should be separated and distinct in ideal sample. Analysing methods gave different results but results from image analysis programs corresponded even to sedimentation or to laser diffraction depending on the particle shape. Detailed analysis of the particle shape required high magnification in SEM, but measured parameters described very well the shape of the particles. Large particles (ecd~1 µm) could be used also in 3D-modelling which enabled the measurement of the thickness of the particles. Scanning electron microscope and image analysis programs were effective and multifunctional tools for particle analyses. Development and experience will devise the usability of analysing method in routine use.