Distant activity of 67P/Churyumov-Gerasimenko in 2014: Ground-based results during the Rosetta pre-landing phase

As the ESA Rosetta mission approached, orbited, and sent a lander to comet 67P/Churyumov-Gerasimenko in 2014, a large campaign of ground-based observations also followed the comet. We constrain the total activity level of the comet by photometry and spectroscopy to place Rosetta results in context and to understand the large-scale structure of the comet's coma pre-perihelion. We performed observations using a number of telescopes, but concentrate on results from the 8m VLT and Gemini South telescopes in Chile. We use R-band imaging to measure the dust coma contribution to the comet's brightness and UV-visible spectroscopy to search for gas emissions, primarily using VLT/FORS. In addition we imaged the comet in near-infrared wavelengths (JHK) in late 2014 with Gemini-S/Flamingos 2. We find that the comet was already active in early 2014 at heliocentric distances beyond 4 au. The evolution of the total activity (measured by dust) followed previous predictions. No gas emissions were detected despite sensitive searches. The comet maintains a similar level of activity from orbit to orbit, and is in that sense predictable, meaning that Rosetta results correspond to typical behaviour for this comet. The gas production (for CN at least) is highly asymmetric with respect to perihelion, as our upper limits are below the measured production rates for similar distances post-perihelion in previous orbits.

Evaluation of biomarkers for the prediction of pre-eclampsia in women with type 1 diabetes mellitus: A systematic review.

BACKGROUND: Pre-eclampsia is a leading cause of maternal and perinatal morbidity and mortality. Women with type 1 diabetes are considered a high-risk group for developing pre-eclampsia. Much research has focused on biomarkers as a means of screening for pre-eclampsia in the general maternal population; however, there is a lack of evidence for women with type 1 diabetes.
OBJECTIVES: To undertake a systematic review to identify potential biomarkers for the prediction of pre-eclampsia in women with type 1 diabetes.
SEARCH STRATEGY: We searched Medline, EMBASE, Maternity and Infant Care, Scopus, Web of Science and CINAHL SELECTION CRITERIA: Studies were included if they measured biomarkers in blood or urine of women who developed pre-eclampsia and had pre-gestational type 1 diabetes mellitus Data collection and analysis A narrative synthesis was adopted as a meta-analysis could not be performed, due to high study heterogeneity.
MAIN RESULTS: A total of 72 records were screened, with 21 eligible studies being included in the review. A wide range of biomarkers was investigated and study size varied from 34 to 1258 participants. No single biomarker appeared to be effective in predicting pre-eclampsia; however, glycaemic control was associated with an increased risk while a combination of angiogenic and anti-angiogenic factors seemed to be potentially useful.
CONCLUSIONS: Limited evidence suggests that combinations of biomarkers may be more effective in predicting pre-eclampsia than single biomarkers. Further research is needed to verify the predictive potential of biomarkers that have been measured in the general maternal population, as many studies exclude women with diabetes preceding pregnancy.

Pre- and post-settlement processes regulating recruitment of the shore crab Carcinus maenas

O sucesso do recrutamento em espécies com ciclos de vida complexos, i.e. com duas ou mais fases de desenvolvimento, depende do fornecimento de larvas aos locais apropriados do assentamento (mecanismos de pré-assentamento) e na consequente sobrevivência destas larvas até aos estágios bentónicos iniciais (mecanismos de pós-assentamento). O estudo dos principais processos físicos que controlam a variabilidade intra-anual do recrutamento do caranguejo Carcinus maenas foi possível com à obtenção em séries diárias da abundância de megalopas no plâncton e do seu assentamento em substratos artificiais de assentamento, e de parâmetros físicos relacionados com a amplitude de maré e o upwelling, durante os meses da época reprodutiva deste caranguejo. Os nossos resultados demonstraram um padrão cíclico de fornecimento de megalopas de C. maenas aos estuários na costa ocidental de Portugal, relacionado com a amplitude de maré e favorecido pelos ventos de sul. O assentamento de megalopas nos substratos artificiais de assentamento mostrou-se desacoplado do fornecimento nos dois estuários. Os dados obtidos sugerem que as megalopas são transportadas para a costa após a acção de ventos de downwelling, e o fornecimento para os estuários ocorre por transporte selectivo por corrente de maré. A utilização de substratos artificiais para medir densidades de juvenis de Carcinus maenas deve ser ponderada, uma vez que se verificou que em habitats estruturalmente menos complexos os juvenis utilizam os colectores como refúgio; em habitats mais complexos, os juvenis preferiram refugiar-se nas ervas marinhas existentes. No entanto, a estimativa de abundâncias diárias medidas nos colectores permitiu a descrição das abundâncias dos vários estádios de desenvolvimento juvenis, bem como as respectivas taxas de crescimento. As capacidades locomotoras de diferentes classes de tamanho de juvenis de C. maenas foram estimadas mediante o cálculo de um índice de locomoção. Os nossos resultados sugerem que os juvenis mais pequenos estão relativamente protegidos em habitats com vegetação densa, provavelmente porque este tipo de habitats inibe os movimentos dos juvenis de maiores dimensões. Foram também encontradas evidências da existência de segregação temporal na actividade locomotora das diferentes classes de juvenis, que funcionará como um mecanismo que permite reduzir o canibalismo e, consequentemente, aumentar a capacidade de suporte dos habitats juvenis. Foi realizado um estudo sobre o canibalismo nos juvenis de C. maenas na Ria de Aveiro, in situ e utilizando densidades reais. Verificou-se que as presas mais pequenas eram as mais vulneráveis, sendo os juvenis de maiores dimensões os predadores mais eficazes. Por outro lado, as taxas de canibalismo foram menores em habitats com elevadas densidades de refúgio (Zostera noltii). A estimativa das taxas diárias de mortalidade devidas ao canibalismo são aproximadamente metade das taxas diárias de mortalidade devidas aos processos de pré-assentamento, indicando que esta população de C. maenas será regulada pelo fornecimento larvar, i.e., será uma população regulada essencialmente por mecanismos préassentamento.

Weathering resistance of thin plasma polymer films on pre-coated steel

O trabalho apresentado teve origem no projecto de investigação “Tailored Thin Plasma Polymers Films for Surface Engineering of Coil Coated Steel”, financiado pelo Programa Europeu ECSC Steel Research. Sistemas de aço galvanizado pré-pintado em banda à base de poliéster e poliuretano foram submetidos a um processo de polimerização por plasma onde um filme fino foi depositado de modo a modificar as propriedades de superfície. Foram usados reactores de cátodo oco, microondas e rádio frequência para a deposição do polímero fino. Os sistemas preparados foram analisados de modo a verificar a influência do processo de polimerização por plasma na alteração das propriedades barreira dos sistemas pré-pintados em banda. Foi estudado o efeito dos diferentes passos do processo de polimerização por plasma, bem como o efeito de diferentes variáveis operatórias. A mistura precursora foi variada de modo a modificar as propriedades da superfície de modo a poder vir a obter maior hidrofobicidade, maior resistência a marcas digitais, bem como maior facilidade de limpeza. Os testes foram conduzidos em solução de NaCl 0,5 M. Para o trabalho foram usadas técnicas de análise da morfologia da superfície como Microscopia de Força Atómica e Microscopia Electrónica de Varrimento. As propriedades electroquímicas dos sistemas foram estudadas por Espectroscopia de Impedância Electroquímica. A estrutura dos filmes gerados no processo de polimerização por plasma foi caracterizada por Microscopia de Transmissão Electrónica. A modificação das propriedades ópticas devido ao processo de polimerização por plasma foi também obtida.

Preparation of new materials by heterogeneous modification of cellulose

O presente trabalho teve como principal objectivo estudar a modificação química heterogénea controlada de fibras de celulose com diferentes reagentes de modo a alterar as suas propriedades de superfície, em especial em termos da criação de um carácter hidrofóbico e lipofóbico, preservando, sempre que possível, as suas propriedades mecânicas e, consequentemente, abrindo novas perspectivas de aplicação. O desenvolvimento do trabalho envolveu três abordagens principais, envolvendo, em cada caso, o estudo de diferentes condições reaccionais. Na primeira abordagem foram utilizados como reagentes de modificação compostos perfluorados, nomeadamente o anidrido trifluoroacético (TFAA), o cloreto de 2,3,4,5,6-pentafluorobenzoílo (PFBz) e o cloreto de 3,3,3- trifluoropropanoílo (TFP), para promover a acilação heterogénea da superfície das fibras. A segunda estratégia usada consistiu na preparação de híbridos de celulose do tipo orgânico-inorgânico classe-II, através da modificação das fibras de celulose com o (3-isocianatopropil)trietoxissilano (ICPTEOS), um reagente organossilano bifuncional. A ligação às fibras de celulose foi efectuada através das funções isocianato e, posteriormente, os grupos etoxissilano foram sujeitos a tratamentos de hidrólise ácida, como tal ou na presença de outros siloxanos, nomeadamente o tetraetoxissilano (TEOS) e o 1H,1H,2H,2Hperfluorodeciltrietoxissilano (PFDTEOS). Finalmente, a última abordagem foi baseada na modificação das fibras com triclorometilssilano (TCMS), através de uma reacção gás-sólido, que dispensou assim o uso de solventes orgânicos. A ocorrência de modificação química foi em cada caso confirmada por Espectroscopia de Infravermelho com Transformada de Fourier e Reflectância Total Atenuada (FTIR-ATR), Análise Elementar (EA) e determinação de ângulos de contacto. Adicionalmente, e dependendo de cada caso específico, diversas outras técnicas foram empregues na caracterização aprofundada dos materiais preparados, nomeadamente Ressonância Magnética Nuclear CPMAS no Estado Sólido (RMN), Espectroscopia de Difracção de Raios-X (XRD), Análise Termogravimétrica (TGA), Espectrometria de Massa de Iões Secundários com Análise de Tempo de Vôo (ToF-SIMS), Espectroscopia Fotoelectrónica de Raios-X (XPS) e Microscopia Electrónica de Varrimento (SEM). Relativamente à acilação das fibras de celulose com reagentes perfluorados, o sucesso da reacção foi comprovado por FTIR-ATR, EA, XPS e ToF-SIMS. Neste contexto, obtiveram-se fibras modificadas possuindo graus de substituição (DS) compreendidos entre 0.006 e 0.39. Verificou-se por XRD que, em geral, mesmo para os valores de DS mais elevados, a cristalinidade das fibras não foi afectada, indicando que a modificação foi limitada às camadas mais superficiais das mesmas ou a regiões amorfas das suas camadas mais internas. Adicionalmente, observou-se por ToF-SIMS que a distribuição dos grupos perfluorados à superfície das fibras foi, de facto, bastante heterogénea. Todos os derivados de celulose perfluorados apresentaram elevada hidrofobicidade e lipofobicidade, tendo-se atingido ângulos de contacto com água e diiodometano de 126º e 104º, respectivamente. Um aspecto interessante relativo a estes materiais é que a elevada omnifobicidade foi observada mesmo para valores de DS muito reduzidos, não se mostrando significativamente afectada pelo aumento dos mesmos. Em consonância, verificou-se por XPS que a cobertura da superfície das fibras de celulose com grupos perfluorados aumentou apenas ligeiramente com o aumento do DS, apontando para a esterificação de camadas mais internas das fibras, associada, neste caso, predominantemente aos seus domínios amorfos. No que diz respeito à estabilidade hidrolítica destes derivados, obtiveram-se dois tipos distintos de comportamento. Por um lado, as fibras de celulose trifluoroacetiladas são facilmente hidrolisáveis em meio neutro, e, por outro, as fibras pentafluorobenzoiladas e trifluoropropanoiladas mostram-se bastante resistentes face a condições de hidrólise em meio neutro e ácido (pH 4), podendo, contudo, ser facilmente hidrolisadas em meio alcalino (pH 9 e 12, para derivados do PFBz e do TFP, respectivamente). Na segunda abordagem verificou-se a ocorrência de reacção por FTIR-ATR e EA. Em geral, a modificação química com ICPTEOS ocorre predominantemente nas zonas mais superficiais das fibras de celulose ou em regiões amorfas. Contudo, em condições reaccionais mais severas (maior quantidade de reagente e tempo de reacção), esta atingiu também regiões cristalinas, afectando, consequentemente, a estrutura cristalina das fibras, como verificado por XRD. Por RMN de 29Si observou-se que após reacção com o ICPTEOS já existiam indícios de alguma hidrólise dos grupos etoxissilano, e que a sua subsequente condensação parcial tinha levado à formação de uma película inorgânica em redor das fibras (verificado por SEM), constituída maioritariamente por estruturas lineares, com uma contribuição mais modesta de estruturas “diméricas” e outras mais ramificadas. Consequentemente, este revestimento inorgânico transformou as fibras de celulose em materiais híbridos com elevada hidrofobicidade (ângulos de contacto com água entre 103-129º). A hidrólise ácida dos restantes grupos etoxissilano, como tal ou na presença de TEOS, originou híbridos de celulose com elevada hidrofilicidade, sendo impossível medirem-se os ângulos de contacto com água dos produtos finais, devido à presença maioritária de grupos silanol (Si-OH) e ligações Si-O-Si à superfície, os quais contribuíram para o consequente aumento de energia de superfície. No entanto, quando a hidrólise foi realizada na presença de PFDTEOS, obtiveram-se materiais híbridos com elevada hidrofobicidade e lipofobicidade (ângulos de contacto com água e diiodometano de 140º e 134º, respectivamente), devido à combinação da presença de grupos perfluorados e micro- e nano-rugosidades na superfície das fibras de celulose, conforme confirmado por SEM. Finalmente, a última abordagem permitiu preparar materiais derivados de celulose altamente hidrofóbicos e lipofóbicos (ângulos de contacto com água e diiodometano de 136º e 109º, respectivamente) por um processo simples, envolvendo tempos de tratamento tão curtos como 0.5 min. Este comportamento omnifóbico foi gerado pelo efeito sinergético entre a diminuição de energia de superfície das fibras, devido à presença de grupos metilo dos resíduos de TCMS ligados a estas, e a condensação dos resíduos de TCMS na forma de micro- e nano-partículas inorgânicas, que levou à criação de um revestimento rugoso à superfície das fibras, conforme observado por RMN de 29Si e SEM, respectivamente. A pré-humidificação das fibras de celulose demonstrou desempenhar um importante papel de “acelerador” dos processos de hidrólise e condensação das moléculas de TCMS. Nestas condições, o tempo de tratamento foi um dos parâmetros mais relevantes, pois para tempos de tratamento muito curtos (0.5 min) os materiais resultantes não apresentaram quaisquer diferenças a nível de propriedades físico-químicas em relação ao substrato de partida (a humidade em excesso consumiu todo o TCMS antes que este conseguisse reagir com os grupos hidroxilo das fibras de celulose), possuindo, por exemplo, valores de ângulos de contacto com água idênticos. Para tempos de tratamento mais longos, como 30 min, os materiais finais apresentaram a maior quantidade de componentes inorgânicos, tal como verificado por EA e TGA. Assim, o controlo da humidade das fibras é imperativo para se poder moldar as propriedades finais dos produtos. Esta última abordagem é particularmente promissora uma vez que tem como base um sistema simples e “verde” que pode ser facilmente implementado. Em conclusão, este trabalho permitiu demonstrar que a modificação química heterogénea controlada das fibras de celulose representa uma iniciativa promissora para a preparação de novos materiais obtidos a partir de recursos renováveis, com propriedades interessantes e passíveis de ser potencialmente aplicados em diferentes áreas. Para além do mais, as estratégias de modificação estudadas podem também ser precursoras de novos estudos que possam vir a ser desenvolvidos dentro do mesmo âmbito.

Assessing the combined effect of land management and wildfire on runoff and soil erosion in north central Portugal

Strong and sometimes extreme responses in runoff and soil erosion following wildfires have been reported worldwide. However, in the case of North-Central Portugal, little research had been carried out regarding the hydrologic and erosive impacts of several land management activities in recently burnt areas (such as ground preparation, post-fire logging or post-fire mitigation treatments). This study aims to assess post-fire runoff and soil erosion response on Eucalypt and Maritime pine plantations during the first, second and third years following wildfires. The effect of several pre-fire ground preparation operations (ploughed down-slope, contour ploughed and inclined terraces), post-fire logging activities (on both the eucalypt and pine plantations), as well as the application of hydromulch (a post-fire emergency treatment) on overland flow and soil erosion were compared to burnt but undisturbed and untreated areas. The intensive monitoring of runoff, soil erosion and selected soil properties served to determine the main factors involved in post-fire runoff and soil erosion and their spatial and temporal variation. Soil water repellency deserved special attention, due to its supposed important role for overland flow generation. Repeated rainfall simulation experiments (RSE’s), micro-scale runoff plots and bounded sediment fences were carried out and/or installed immediately after the wildfire on seven burnt slopes. Micro-scale runoff plots results under natural rainfall conditions were also compared to the RSE’s results, which was useful for assessing the representativeness of the data obtained with artificial rainfall. The results showed comparable runoff coefficient (20-60%) but lower sediment losses (125-1000 g m-2) than prior studies in Portugal, but especially outside Portugal. Lower sediment losses were related with the historic intensive land use in the area. In evaluating these losses, however, the shallowness and stoniness of the soils, as well as the high organic matter fraction of the eroded sediments (50%) must not be overlooked. Sediment limited erosion was measured in all the ploughed sites, probably due to the time since ploughing (several years). The disturbance of the soil surface cover due to post-fire logging and wood extraction substantially increased sediment losses at both the pine and eucalypt sites. Hydromulch effectiveness in reducing the runoff (70%) and sediment losses (83%) was attributed to the protective high coverage provided by hydromulch. The hydromulch significantly affected the soil cover and other soil properties and these changes also reduced the soil erosion risk. The rainfall amount was the main factor explaining the variance in runoff. However, a shift from rainfall amount to rainfall intensity was detected when either the surface cover or the infiltration capacity (hydrophilic conditions) increased. Sediment losses were controlled by rainfall intensity and surface cover. The role of soil water repellency on runoff generation was not consistent; the overall repellency levels alone were not enough to assess its hydrological impact. Soil water repellency explained runoff generation in the specific-sites model better than in the overall model. Additionally, soil moisture content was a better predictor for soil water repellency than antecedent rainfall. The natural rainfall results confirmed that RSE’s were able to capture the specific sediment losses and its organic matter content as well as the differences between the ploughed and unploughed sites. Repeated RSE’s also captured the seasonal variations in runoff and sediment losses attributed to soil water repellency. These results have implications for post-fire soil erosion modelling and soil conservation practices in the region, or areas with the same land use, climate and soil characteristics. The measured sediment loss, as well as the increasing frequency of ploughing in recently burnt and unburnt eucalypt stands, suggests ploughing is not an effective as a soil conservation measure. Logging activities with less impact are recommended in order to maintain the forest litter protecting the soil surface. Due to its high effectiveness in reducing runoff and soil erosion, hydromulch is recommended for highly sensitive and vulnerable areas.

Optimisation of viscoelastic treatments using genetic algorithms

Viscoelastic treatments are one of the most efficient treatments, as far as passive damping is concerned, particularly in the case of thin and light structures. In this type of treatment, part of the strain energy generated in the viscoelastic material is dissipated to the surroundings, in the form of heat. A layer of viscoelastic material is applied to a structure in an unconstrained or constrained configuration, the latter proving to be the most efficient arrangement. This is due to the fact that the relative movement of both the host and constraining layers cause the viscoelastic material to be subjected to a relatively high strain energy. There are studies, however, that claim that the partial application of the viscoelastic material is just as efficient, in terms of economic costs or any other form of treatment application costs. The application of patches of material in specific and selected areas of the structure, thus minimising the extension of damping material, results in an equally efficient treatment. Since the damping mechanism of a viscoelastic material is based on the dissipation of part of the strain energy, the efficiency of the partial treatment can be correlated to the modal strain energy of the structure. Even though the results obtained with this approach in various studies are considered very satisfactory, an optimisation procedure is deemed necessary. In order to obtain optimum solutions, however, time consuming numerical simulations are required. The optimisation process to use the minimum amount of viscoelastic material is based on an evolutionary geometry re-design and calculation of the modal damping, making this procedure computationally costly. To avert this disadvantage, this study uses adaptive layerwise finite elements and applies Genetic Algorithms in the optimisation process.

Understanding and modelling hydrological and soil erosion processes in burnt forest catchments

Forest fires implications in overland flow and soil erosion have been researched for several years. Therefore, is widely known that fires enhance hydrological and geomorphological activity worldwide as also in Mediterranean areas. Soil burn severity has been widely used to describe the impacts of fire on soils, and has being recognized as a decisive factor controlling post-fire erosion rates. However, there is no unique definition of the term and the relationship between soil burn severity and post-fire hydrological and erosion response has not yet been fully established. Few studies have assessed post-fire erosion over multiple years, and the authors are aware of none which assess runoff. Small amount of studies concerning pre-fire management practices were also found. In the case of soil erosion models, the Revised Universal Soil Loss Equation (RUSLE) and the revised Morgan–Morgan–Finney (MMF) are well-known models, but not much information is available as regards their suitability in predicting post-fire soil erosion in forest soils. The lack of information is even more pronounced as regards post-fire rehabilitation treatments. The aim of the thesis was to perform an extensive research under the post fire hydrologic and erosive response subject. By understanding the effect of burn severity in ecosystems and its implications regarding post fire hydrological and erosive responses worldwide. Test the effect of different pre-fire land management practices (unplowed, downslope plowed and contour plowed) and time-since-fire, in the post fire hydrological and erosive response, between the two most common land uses in Portugal (pine and eucalypt). Assess the performance of two widely-known erosion models (RUSLE and Revised MMF), to predict soil erosion rates during first year following two wildfires of distinctive burn severity. Furthermore, to apply these two models considering different post-fire rehabilitation treatments in an area severely affected by fire. Improve model estimations of post-fire runoff and erosion rates in two different land uses (pine and eucalypt) using the revised MMF. To assess these improvements by comparing estimations and measurements of runoff and erosion, in two recently burned sites, as also with their post fire rehabilitation treatments. Model modifications involved: (1) focusing on intra-annual changes in parameters to incorporate seasonal differences in runoff and erosion; and (2) inclusion of soil water repellency in runoff predictions. Additionally, validate these improvements with the application of the model to other pine and eucalypt sites in Central Portugal. The review and meta-analysis showed that fire occurrence had a significant effect on the hydrological and erosive response. However, this effect was only significantly higher with increasing soil burn severity for inter-rill erosion, and not for runoff. This study furthermore highlighted the incoherencies between existing burn severity classifications, and proposed an unambiguous classification. In the case of the erosion plots with natural rainfall, land use factor affected annual runoff while land management affected both annual runoff and erosion amounts significantly. Time-since-fire had an important effect in erosion amounts among unplowed sites, while for eucalypt sites time affected both annual runoff and erosion amounts. At all studied sites runoff coefficients increase over the four years of monitoring. In the other hand, sediment concentration in the runoff, recorded a decrease during the same period. Reasons for divergence from the classic post-fire recovery model were also explored. Short fire recurrence intervals and forest management practices are viewed as the main reasons for the observed severe and continuing soil degradation. The revised MMF model presented reasonable accuracy in the predictions while the RUSLE clearly overestimated the observed erosion rates. After improvements: the revised model was able to predict first-year post-fire plot-scale runoff and erosion rates for both forest types, these predictions were improved both by the seasonal changes in the model parameters; and by considering the effect of soil water repellency on the runoff, individual seasonal predictions were considered accurate, and the inclusion of the soil water repellency in the model also improved the model at this base. The revised MMF model proved capable of providing a simple set of criteria for management decisions about runoff and erosion mitigation measures in burned areas. The erosion predictions at the validation sites attested both to the robustness of the model and of the calibration parameters, suggesting a potential wider application.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.

The Influence of Causal Explanations and Diagnostic Labeling on Psychology Students’ Beliefs About Treatments, Prognosis, Dangerousness and Unpredictability in Schizophrenia

This study explored views of 566 Italian psychology students about schizophrenia. The most frequently cited causes were psychological traumas (68%) and heredity (54%). Thirty-three percent of students firmly believed that people with the condition could recover. Reporting heredity among the causes, and identifying schizophrenia were both associated with prognostic pessimism, greater confidence in pharmacological treatments and lower confidence in psychological treatments. Schizophrenia labeling was also associated with higher perception of unpredictability and dangerousness. Compared to first year students, fourth/fifth year students more frequently reported heredity among the causes, and were more pessimistic about schizophrenia recovery. Stigma topics should be included in future psychologists’ education.

L'agencement des relations père-enfant et mère-enfant : liens avec le développement social d'enfants d'âge préscolaire de familles nucléaires

Ce mémoire s'intéresse à l'agencement des relations qu'un enfant maintient avec ses deux parents et à leurs effets sur le développement social de l'enfant. Plus spécifiquement, ce mémoire explore les relations d'attachement et d'activation. Si le premier terme ferait traditionnellement référence à la relation spécifique entre une mère et son enfant, l'activation concernerait plutôt, selon certains auteurs, la relation entre un père et son enfant. Les psychoéducatrices et psychoéducateurs sont très souvent appelés à soutenir les personnes sur le plan de leur développement social. L'une des fondations cruciales du développement de la socialité serait la première relation créée et maintenue entre un enfant et son premier donneur de soins : la relation d'attachement. En effet, la relation d'attachement, selon la définition classique, référerait davantage à la relation spécifique que les enfants maintiendraient généralement avec leur mère. La façon dont l'enfant entrera ultérieurement en contact avec les personnes de son environnement pourrait être calquée sur cette première relation. Si, au départ, on s'intéressait davantage à l'attachement mère-enfant, plusieurs études ont tenté d'intégrer le père au modèle classique de l'attachement. Il semble que les pères s'intégreraient plus difficilement à ce modèle classique. Certains l'expliquent en faisant valoir que les prémisses théoriques de l'attachement se seraient plutôt concentrées sur la dimension simplement sécuritaire qui serait plus adaptée pour les mères. Les pères auraient un mode d'entrée en relation avec leurs enfants qui serait beaucoup plus dynamique, caractérisé par des jeux physiques chaleureux, mais où les limites seraient clairement définies par l'autorité du parent. Ce type de relation s'appelle la relation d'activation. La relation d'activation favoriserait chez l'enfant la persévérance et l'autorégulation face à l'exploration sécuritaire de son environnement, et par le fait même, constituerait le pendant exploratoire de la relation d'attachement. Des études ont déjà montré les liens de la relation d'activation avec le développement social de l'enfant. Si le cadre théorique de l'activation a été pensé en fonction du père, il reste encore à savoir si la mère peut aussi prendre sa place dans cette relation dynamisante. Alors qu'au Québec, l'organisation des rôles familiaux est en constante évolution, il convient de bien comprendre d'abord les agencements relationnels de la famille nucléaire afin d'éventuellement outiller les parents de familles d'autres types. Pour explorer les mécanismes relationnels, une recension des écrits systématique a été réalisée. L'un des constats les plus intéressants de cette recension est l'absence d'études ayant étudié l'activation et le développement social auprès des enfants de plus de 36 mois. De plus, les deux types de relations (attachement et activation) n'ont pas été vérifiés chez les deux parents d'une famille nucléaire. Un dernier constat concerne enfin les instruments utiliser pour mesurer le construit de la sécurité d'attachement : il semble que, selon l'outil choisi et le type de variable utilisé, les constats réalisés sur la sécurité d'attachement diffèrent. Afin de répondre à cette lacune, le présent projet propose une avenue novatrice, à titre exploratoire : vérifier l'agencement des relations d'activation et d'attachement dans une triade familiale (un enfant et ses deux parents biologiques), et son lien avec le développement social de l'enfant. Étant donné les ressources limitées, seulement cinq cas ont été recrutés. Des données ont été collectées par observation directe et indirecte, selon un devis transversal. Puis les données ont été analysées d'abord de façon descriptive. Quelques analyses corrélationnelles ont toutefois été réalisées à titre exploratoire. Malgré l'impossibilité de généraliser les résultats de cette étude, ces derniers présentent plusieurs points similaires à la littérature scientifique. Le constat le plus évident est le lien entre les problèmes d'activation et les difficultés de comportements internalisés qui ont aussi été documentés dans la littérature scientifique. Ce projet consolide l'intérêt de s'intéresser aux deux dimensions de la relation parent-enfant, tant en recherche que sur le plan de l'évaluation psychosociale de l'enfant.

South Carolina Energy Office pre-approved Energy Efficiency Products and Measures

South Carolina law (48-52-640) requires state agencies to submit a disclaimer statement to the State Energy Office with its annual report stating that it did not purchase an energy conservation product that had not been certified by the State Energy Office. This is a list of preapproved products, retrofits and upgrades.

Topical bacteriophage therapy of the infected diabetic foot

Tese de doutoramento, Medicina (Medicina Interna), Universidade de Lisboa, Faculdade de Medicina, 2014