Experimental impact and finite element analysis of a composite, portable road safety barrier

This thesis provides an experimental and computational platform for investigating the performance and behaviour of water filled, plastic portable road safety barriers in an isolated impact scenario. A schedule of experimental impact tests were conducted assessing the impact response of an existing design of road safety barrier utilising a novel horizontal impact testing system. A coupled finite element and smooth particle hydrodynamic model of the barrier system was developed and validated against the results of the experimental tests. The validated model was subsequently used to assess the effect of certain composite materials on the impact performance of the water filled, portable road safety barrier system.

Shear-critical impact response of biaxially loaded reinforced concrete circular columns

A study on the vulnerability of biaxially loaded reinforced concrete (RC) circular columns in multi-story buildings under low- to medium-velocity impacts at shear-critical locations is presented. The study is based on a previously validated nonlinear explicit dynamic finite element (FE) modeling technique developed by the authors. The impact is simulated using force pulses generated from full-scale vehicle impact tests abundantly found in the literature with a view to quantifying the sensitivity of the design parameters of the RC columns under the typical impacts that are representative of the general vehicle population. The design parameters considered include the diameter and height of the column, the vertical steel ratio, the concrete grade, and the confinement effects. From the results of the simulations, empirical equations to quantify the critical impulses for the simplified design of the short, circular RC columns under the risk of shear-critical impacts are developed.

SettleMEN-2: Displaced twice? Impact of the Queensland floods on men from refugee backgrounds living in Brisbane and Toowoomba. Broadsheet No. 1: Exposure to and impact of the floods

Between 2008 and 2010, the SettleMEN study followed a group of 233 recently arrived men from refugee backgrounds living in urban and regional Southeast Queensland with the aim of documenting their health and settlement experiences. The study found that overall, these men bring important resources that may help them to cope better with the challenges of settlement: good levels of subjective health status, mental health and wellbeing; good family and social support; and good levels of engagement in tertiary/trade education in Australia. Over time, however, their levels of wellbeing decreased as they experienced barriers to social participation and inclusion within their host community, including: unemployment and difficulties securing good jobs (even for those with tertiary/trade qualifications obtained in Australia), financial stress, difficulties accessing housing, limited interactions with neighbours, and experiences of racism and discrimination. Importantly, although men living in the Toowoomba acknowledged some of the benefits of regional settlement, they faced greater barriers to participation in the labour market, reported lower job satisfaction, and were more likely to experience social exclusion overall. In 2012 method approach and a peer interviewer model, we were able to conduct a follow 141 (61%) of the original 233 SettleMEN participants to document the impact of the January 2011 Queensland floods on their health and settlement. This broadsheet focuses on participants’ degree of exposure to and impact of the floods, their perceptions of safety and security, and their vulnerability and adaptive capacity to extreme weather events.

The Chinese state enterprise sector: Labour market reform and the impact on male–female wage structure

The paper examines the wage structure in the Chinese state enterprise sector between 1981 and 1987. This period is of particular interest given the introduction of major labour market reforms in China during the early 1980s. In essence the reforms represented a movement away from administratively determined prices towards a market–oriented system combined with a relatively flexible system of labour allocation. The Juhn, Murphy and Pierce (1991) decomposition is employed to shed light on the role of changing labour market institutions over the period.

Implementation and removal of an affirmative-action quota : the impact on task assignment and workers’ skill acquisition

Both the United States and Canada have federal legislation that attempts to address employment inequities across specific target groups. The US has a long tradition of affirmative action, dating back to President Kennedy’s 1961 Executive Order; Canada enacted its Employment Equity Act in 1986. Employment Equity/Affirmative Action policy has attracted significant controversy, with high profile court cases and the repeal of state/provincial legislation. Coate and Loury (1993) examine the theoretical impact of introducing affirmative action. Unfortunately the theoretical impact of affirmative action is ambiguous. The current paper employs a laboratory experiment to shed empirical light on this theoretical ambiguity.

Industrial land price and its impact on urban growth : a Chinese case study

China is experiencing rapid progress in industrialization, with its own rationale toward industrial land development based on a deliberate change from an extensive to intensive form of urban land use. One result has been concerted attempts by local government to attract foreign investment by a low industrial land price strategy, which has resulted in a disproportionally large amount of industrial land within the total urban land use structure at the expense of the urban sprawl of many cities. This paper first examines “Comparable Benchmark Price as Residential land use” (CBPR) as the theoretical basis of the low industrial land price phenomenon. Empirical findings are presented from a case study based on data from Jinyun County, China. These data are analyzed to reveal the rationale of industrial land price from 2000 to 2010 concerning the CBPR model. We then explore the causes of low industrial land prices in the form of a “Centipede Game Model”, involving two neighborhood regions as “major players” to make a set of moves (or strategies). When one of the players unilaterally reduces the land price to attract investment with the aim to maximize profits arising from the revenues generated from foreign investment and land premiums, a two-player price war begins in the form of a dynamic game, the effect of which is to produce a downward spiral of prices. In this context, the paradox of maximizing profits for each of the two players are not accomplished due to the inter-regional competition of attracted investment leading to a lose-lose situation for both sides’ in competing for land premium revenues. A short-term solution to the problem is offered involving the establishment of inter-regional cooperative partnerships. For the longer term, however, a comprehensive reform of the local financial system, more adroit regional planning and an improved means of evaluating government performance is needed to ensure the government's role in securing pubic goods is not abandoned in favor of one solely concerned with revenue generation.

Impact of a school-based food garden on attitudes and identification skills regarding vegetables and fruit : a 12-month intervention trial

Objective To determine changes in ability to identify specific vegetables and fruits, and attitudes towards vegetables and fruit, associated with the introduction of a school-based food garden. Design A 12-month intervention trial using a historical control (control n 132, intervention n 120), class-based, self-administered questionnaires requiring one-word answers and 3-point Likert scale responses. Setting A state primary school (grades 4 to 7) in a low socio-economic area of Brisbane, Australia. Intervention The introduction of a school-based food garden, including the funding of a teacher coordinator for 11 h/week to facilitate integration of garden activities into the curriculum. Main outcome measures Ability to identify a series of vegetables and fruits, attitudes towards vegetables and fruit. Analysis Frequency distributions for each item were generated and χ2 analyses were used to determine statistical significance. Exploratory factor analysis was employed to detect major trends in data. Results The intervention led to enhanced ability to identify individual vegetables and fruits, greater attention to origins of produce (garden-grown and fresh), changes to perceived consumption of vegetables and fruits, and enhanced confidence in preparing fruit and vegetable snacks, but decreased interest in trying new fruits. Conclusions The introduction of this school-based food garden was associated with skill and attitudinal changes conducive to enhancing vegetable and fruit consumption. The ways in which such changes might impact on dietary behaviours and intake require further analysis.

Re-contextualising and re-theorising cultural values in teacher education practices : a Samoan standpoint

This thesis explores the significance of Samoan cultural values in teacher education practices. The study examines the coexistence of traditional Samoan cultural values alongside values that have resulted through the influence of missionaries, colonisation, post-colonialism and globalisation.

The impact of interface modality on police officers' visual behaviour when using an in-vehicle system

Background Standard operating procedures state that police officers should not drive while interacting with their mobile data terminal (MDT) which provides in-vehicle information essential to police work. Such interactions do however occur in practice and represent a potential source of driver distraction. The MDT comprises visual output with manual input via touch screen and keyboard. This study investigated the potential for alternative input and output methods to mitigate driver distraction with specific focus on eye movements. Method Nineteen experienced drivers of police vehicles (one female) from the NSW Police Force completed four simulated urban drives. Three drives included a concurrent secondary task: imitation licence plate search using an emulated MDT. Three different interface methods were examined: Visual-Manual, Visual-Voice, and Audio-Voice (“Visual” and “Audio” = output modality; “Manual” and “Voice” = input modality). During each drive, eye movements were recorded using FaceLAB™ (Seeing Machines Ltd, Canberra, ACT). Gaze direction and glances on the MDT were assessed. Results The Visual-Voice and Visual-Manual interfaces resulted in a significantly greater number of glances towards the MDT than Audio-Voice or Baseline. The Visual-Manual and Visual-Voice interfaces resulted in significantly more glances to the display than Audio-Voice or Baseline. For longer duration glances (>2s and 1-2s) the Visual-Manual interface resulted in significantly more fixations than Baseline or Audio-Voice. The short duration glances (<1s) were significantly greater for both Visual-Voice and Visual-Manual compared with Baseline and Audio-Voice. There were no significant differences between Baseline and Audio-Voice. Conclusion An Audio-Voice interface has the greatest potential to decrease visual distraction to police drivers. However, it is acknowledged that an audio output may have limitations for information presentation compared with visual output. The Visual-Voice interface offers an environment where the capacity to present information is sustained, whilst distraction to the driver is reduced (compared to Visual-Manual) by enabling adaptation of fixation behaviour.

Lateral impact response and parametric studies of axially loaded square concrete filled steel tube columns

This paper presents a numerical study on the response of axially loaded slender square concrete filled steel tube (CFST) columns under low velocity lateral impact loading. A finite element analysis (FEA) model was developed using the explicit dynamic nonlinear finite element code LS -DYNA in which the strain rate effects of both steel and concrete, contact between steel tube and concrete and confinement effect provided by the steel tube for the concrete were considered. The model also benefited from a relatively recent feature of LS-DYNA for applying a pre-loading in the explicit solver. The developed numerical model was verified for its accuracy and adequacy by comparing the results with experimental results available in the literature. The verified model was then employed to conduct a parametric study to investigate the influence of axial load level, impact location, support conditions, and slenderness ratio on the response of the CFST columns. A good agreement between the numerical and experimental results was achieved. The model could reasonably predict the impact load-deflection history and deformed shape of the column at the end of the impact event. The results of the parametric study showed that whilst impact location, axial load level and slenderness ratio can have a significant effect on the peak impact force, residual lateral deflection and maximum lateral deflection, the influence of support fixity is minimal. With an increase of axial load to up to a certain level, the peak force increases; however, a further increase in the axial load causes a decrease in the peak force. Both residual lateral deflection and maximum lateral deflection increase as axial load level increases. Shifting the impact location towards the supports increases the peak force and reduces both residual and maximum lateral deflections. A rise in slenderness ratio decreases the peak force and increases the residual and maximum lateral deflections.

A systematic approach for selecting lean strategies and assessing leanness in manufacturing organizations

Lean strategies have been developed to eliminate or reduce manufacturing waste and thus improve operational efficiency in manufacturing processes. However, implementing lean strategies requires a large amount of resources and, in practice, manufacturers encounter difficulties in selecting appropriate lean strategies within their resource constraints. There is currently no systematic methodology available for selecting appropriate lean strategies within a manufacturer's resource constraints. In the lean transformation process, it is also critical to measure the current and desired leanness levels in order to clearly evaluate lean implementation efforts. Despite the fact that many lean strategies are utilized to reduce or eliminate manufacturing waste, little effort has been directed towards properly assessing the leanness of manufacturing organizations. In practice, a single or specific group of metrics (either qualitative or quantitative) will only partially measure the overall leanness. Existing leanness assessment methodologies do not offer a comprehensive evaluation method, integrating both quantitative and qualitative lean measures into a single quantitative value for measuring the overall leanness of an organization. This research aims to develop mathematical models and a systematic methodology for selecting appropriate lean strategies and evaluating the leanness levels in manufacturing organizations. Mathematical models were formulated and a methodology was developed for selecting appropriate lean strategies within manufacturers' limited amount of available resources to reduce their identified wastes. A leanness assessment model was developed by using the fuzzy concept to assess the leanness level and to recommend an optimum leanness value for a manufacturing organization. In the proposed leanness assessment model, both quantitative and qualitative input factors have been taken into account. Based on program developed in MATLAB and C#, a decision support tool (DST) was developed for decision makers to select lean strategies and evaluate the leanness value based on the proposed models and methodology hence sustain the lean implementation efforts. A case study was conducted to demonstrate the effectiveness of these proposed models and methodology. Case study results suggested that out of 10 wastes identified, the case organization (ABC Limited) is able to improve a maximum of six wastes from the selected workstation within their resource limitations. The selected wastes are: unnecessary motion, setup time, unnecessary transportation, inappropriate processing, work in process and raw material inventory and suggested lean strategies are: 5S, Just-In-Time, Kanban System, the Visual Management System (VMS), Cellular Manufacturing, Standard Work Process using method-time measurement (MTM), and Single Minute Exchange of Die (SMED). From the suggested lean strategies, the impact of 5S was demonstrated by measuring the leanness level of two different situations in ABC. After that, MTM was suggested as a standard work process for further improvement of the current leanness value. The initial status of the organization showed a leanness value of 0.12. By applying 5S, the leanness level significantly improved to reach 0.19 and the simulation of MTM as a standard work method shows the leanness value could be improved to 0.31. The optimum leanness value of ABC was calculated to be 0.64. These leanness values provided a quantitative indication of the impacts of improvement initiatives in terms of the overall leanness level to the case organization. Sensitivity analsysis and a t-test were also performed to validate the model proposed. This research advances the current knowledge base by developing mathematical models and methodologies to overcome lean strategy selection and leanness assessment problems. By selecting appropriate lean strategies, a manufacturer can better prioritize implementation efforts and resources to maximize the benefits of implementing lean strategies in their organization. The leanness index is used to evaluate an organization's current (before lean implementation) leanness state against the state after lean implementation and to establish benchmarking (the optimum leanness state). Hence, this research provides a continuous improvement tool for a lean manufacturing organization.

The impact of professional development on early childhood educators’ confidence, understanding and knowledge of education for sustainability

In recent times, Australia has recognised and enacted a range of initiatives at service, system and community levels that seek to embed sustainability into the early childhood sector. This paper explores the impact of a professional development (PD) session that provided opportunities for early childhood educators to learn and share ideas about the theory and practice of sustainability generally and early childhood education for sustainability (ECEfS) specifically. The PD was entitled ‘Living and Learning about Sustainability in the Early Years’ and was offered on three occasions across Tasmania. A total of 99 participants attended the three PD sessions (one 5 hour; two 2 hour). The participants had varying levels of experience and included early childhood teachers, centre based educators and preservice teachers. At the start and end of the PD, participants were invited to complete a questionnaire that contained a series of likert scale questions that explored their content knowledge, level of understanding and confidence in regards to ECEfS. Participants were also asked at the start and end of the PD to ‘list five words you think of when you consider the word sustainability.’ A model of teacher professional growth was used to conceptualise the results related to the changes in knowledge, understanding and confidence (personal domain) as a result of the PD related to ECEfS (external domain). The likert-scale questions on the questionnaire revealed significant positive changes in levels of knowledge, understanding and confidence from the start to the end of the PD. Differences as a function of length of PD, level of experience and role are presented and discussed. The ‘5 words’ question showed that participants widened their understandings of ECEfS from a narrow environmental focus to a broader understanding of the social, political and economic dimensions. The early childhood education and care (ECEC) sector has been characterised as having a pedagogical advantage for EfS suggesting that early childhood educators are well placed to engage with EfS more readily than might educators in other education sectors. This article argues that PD is necessary to develop capability in educators in order to meet the imperatives around sustainability outlined in educational policy and curriculum documents in ECEC.

Genome-wide association study identifies a possible susceptibility locus for endometrial cancer

Background: Genome-wide association studies (GWAS) have identified more than 100 genetic loci for various cancers. However, only one is for endometrial cancer. Methods: We conducted a three-stage GWAS including 8,492 endometrial cancer cases and 16,596 controls. After analyzing 585,963 single-nucleotide polymorphisms (SNP) in 832 cases and 2,682 controls (stage I) from the Shanghai Endometrial Cancer Genetics Study, we selected the top 106 SNPs for in silico replication among 1,265 cases and 5,190 controls from the Australian/British Endometrial Cancer GWAS (stage II). Nine SNPs showed results consistent in direction with stage I with P < 0.1. These nine SNPs were investigated among 459 cases and 558 controls (stage IIIa) and six SNPs showed a direction of association consistent with stages I and II. These six SNPs, plus two additional SNPs selected on the basis of linkage disequilibrium and P values in stage II, were investigated among 5,936 cases and 8,166 controls from an additional 11 studies (stage IIIb). Results: SNP rs1202524, near the CAPN9 gene on chromosome 1q42.2, showed a consistent association with endometrial cancer risk across all three stages, with ORs of 1.09 [95% confidence interval (CI), 1.03–1.16] for the A/G genotype and 1.17 (95% CI, 1.05–1.30) for the G/G genotype (P = 1.6 × 10−4 in combined analyses of all samples). The association was stronger when limited to the endometrioid subtype, with ORs (95% CI) of 1.11 (1.04–1.18) and 1.21 (1.08–1.35), respectively (P = 2.4 × 10−5). Conclusions: Chromosome 1q42.2 may host an endometrial cancer susceptibility locus. Impact: This study identified a potential genetic locus for endometrial cancer risk

More than merely wicked : regulating sewage discharges and other unspeakable problems in environmental policy-making and planning

While the communicative turn in policy-making has encouraged the public deliberation of policy decisions it has arguably had a more limited impact on the ability of public processes to deal with wicked problems. Wicked policy problems are characterised by high levels of complexity, uncertainty and divergence of values. However, some wicked problems present the additional challenge of high levels of psychosocial sensitivity and verbal proscription. Because these unspeakable policy problems frequently involve a significant moral dimension, the regulation of intimate processes or bodies, and strong elements of abjection and symbolic pollution they are quite literally problems that we don’t like to think about or talk about. However, the potential environmental and social impacts of these problems require that they be addressed. In this paper I present the preliminary findings of a research project focussed on the idea of the unspeakable policy problem and how its unspeakable nature can impact upon public participation and policy and environmental outcomes.

Understanding the impact of legislative changes on child car seating and restraint practices in regional Queensland

Road crashes contribute to a significant amount of child mortality and morbidity in Australia. In fact, passenger injuries contribute to the majority of child crash road trauma. A number of factors contribute to child injury and death in motor vehicles, including inappropriate seating position, inappropriate choice of restraint, and incorrect installation and use of child restraints. Prior to March 2010, child restraint legislation in Queensland only required children twelve months and younger to be seated in a properly adjusted and fastened child restraint. This legislation left older infants and young children potentially suboptimally protected. From March 2010, new legislation specified seating position and type of child restraint required, depending on the age of the child. This research was underpinned by the Health Belief Model (HBM), which explores health related behaviour, behaviour change, environmental factors influencing behaviour change (including legislative changes) and is flexible enough to be used in relation to parents' health practices for their children, rather than parent health directly. This thesis investigates the extent to which the changes to child restraint legislation have led parents in regional areas of Queensland to use appropriate restraint practices for their children and determines the extent to which the constructs of the HBM, parental perceptions, barriers and environmental factors contribute to the appropriateness of child seating and restraint use. Study One included three sets of observations taken in two regional cities of Queensland prior to the legislative amendment, during an educative period of six months, and after the enactment of the legislation. Each child's seating position and restraint type were recorded. Results showed that the proportion of children observed occupying the front seat decreased by 15.6 per cent with the announcement the legislation. There was no decrease in front seat use at the enactment of the legislation. The proportion of children observed using dedicated child restraints increased by 8.8 per cent with the announcement of the legislation when there was one child in the vehicle. Further, there was a 10.1 per cent increase in the proportion of children observed using a seat belt that fit with the announcement when there was one child in the vehicle and with the enactment of the legislation regardless of the number of children in the vehicle (21.8 per cent for one child, 39.7 per cent for two children and 40.2 per cent for three or more children). Study Two comprised initial intercept interviews, later followed up by telephone, with parents with children aged eight years and younger at the announcement and telephone interviews at the enactment of the legislation in one regional city in Queensland. Parents reported their child restraint practices, and opinions, knowledge and understanding of the requirements of the new legislation. Parent responses were analysed in terms of the constructs in the HBM. When asked which seating position their child 'usually' used, parents reported child front seat use was nil (0.0 per cent) and did not change with the enactment of the legislative amendment. However, when parents were asked whether they allowed children to use the front seat at some point within the six months prior to the interview, reported child front seat use was 7 (5.4 per cent) children at T2 and 10 (9.6 per cent) at T3. Reported use of age-appropriate child restraints did not increase with the enactment of the legislation (p = 0.77, ns). Parents reported restraint practices were classed as either appropriate or inappropriate. Parents who reported appropriate restraint practices were those whose children were sitting in optimal restraints and seating positions for their age according to the requirements of the legislation. Parents who reported inappropriate restraint practices were those who had one or more children who were suboptimally restrained or seated for their age according to the requirements of the legislation. Neither parents' perceptions about their susceptibility of being in a crash nor the likelihood of severity of child injury if involved in a crash yielded significant differences in the appropriateness of reported parent restraint practices over time with the enactment of the legislation. A trend in the data suggested parents perceived a benefit to using appropriate restraint practices was to avoid fines and demerit points. Over 75 per cent of parents who agreed that child restraints provide better protection for children than an adult seat belt reported appropriately seating and restraining their children (2 (1) = 8.093, p<.05). The self-efficacy measure regarding parents' confidence in installing a child restraint showed a significant association with appropriate parental restraint practices (2 (1) = 7.036, p<.05). Results suggested that some parents may have misinterpreted the announcement of the legislative amendment as the announcement of the enforcement of the legislation instead. Some parents who correctly reported details of the legislation did not report appropriate child restraint practices. This finding shows that parents' knowledge of the legislative amendment does not necessarily have an impact on their behaviour to appropriately seat and restrain children. The results of these studies have important implications for road safety and the prevention of road-related injury and death to children in Queensland. Firstly, parents reported feeling unsure of how to install restraints, which suggests that there may be children travelling in restraints that have not been installed correctly, putting them at risk. Interventions to alert and encourage parents to seek advice when unsure about the correct installation of child restraints could be considered. Secondly, some parents in this study although they were using the most appropriate restraint for their children, reported using a type that was not the most appropriate restraint for the child's age according to the legislation. This suggests that intervention may be effective in helping parents make a more accurate choice of the most appropriate type of restraint to use with children, especially as the child ages and child restraint requirements change. Further research could be conducted to ascertain the most effective methods of informing and motivating parents to use the most appropriate restraints and seating positions for their children, as these results show a concerning disparity between reported restraint practices and those that were observed.