Table 1 Core site, fractional abundance of individual isoprenoid GDGTs and TEX86 values

TEXL86 and TEXH86 are organic palaeothermometers based on the lipids of Group 1 Crenarchaeota, recently proposed as a modified version of the original TEX86 index, but with significantly improved geographical coverage. Since few data from the global core top calibration are from the Pacific, this study was carried out to assess whether the global core top calibration is regionally biased or not. The result of principal components analysis of the fractional abundance of GDGTs, an analysis of variance (ANOVA) and the comparison of the residuals of TEXH 86 derived sea surface temperature (SST) estimates of the Pacific subset with that of the global data set suggest that the Pacific subset has a similar TEXH 86-SST relationship with the global data set. However, the regression line through the Pacific data and an ANOVA on the residuals of TEXL 86 derived SST estimates suggest otherwise. The contradictory findings are likely to stem from the large scatter in the Pacific TEXL 86 values in the mid temperature range. While regionality does not seem to exert a strong bias on TEXL 86 and TEXH 86 calibration, it appears that there is a strong need to resolve the large scatter in the global data set, especially in the mid and high latitudes, in order to improve the calibration for a better SST estimation.

Trace element composition of IODP Site 304-U1309 and 305-U1309 (Table A2)

IODP Site U1309 was drilled at Atlantis Massif, an oceanic core complex, at 30°N on the Mid-Atlantic Ridge (MAR). We present the results of a bulk rock geochemical study (major and trace elements) carried out on 228 samples representative of the different lithologies sampled at this location. Over 96% of Hole U1309D is made up of gabbroic rocks. Diabases and basalts cross-cut the upper part of the section; they have depleted MORB compositions similar to basalts sampled at MAR 30°N. Relics of mantle were recovered at shallow depth. Mantle peridotites show petrographic and geochemical evidence of extensive melt-rock interactions. Gabbroic rocks comprise: olivine-rich troctolites (> 70% modal olivine) and troctolites having high Mg# (82-89), high Ni (up to 2300 ppm) and depleted trace element compositions (Yb 0.06-0.8 ppm); olivine gabbros and gabbros (including gabbronorites) with Mg# of 60-86 and low trace element contents (Yb 0.125-2.5 ppm); and oxide gabbros and leucocratic dykes with low Mg# (< 50), low Ni (~65 ppm) and high trace element contents (Yb up to 26 ppm). Troctolites and gabbros are amongst the most primitive and depleted oceanic gabbroic rocks. The main geochemical characteristics of Site U1309 gabbroic rocks are consistent with a formation as a cumulate sequence after a common parental MORB melt, although (lack of systematic) downhole variations indicate that the gabbroic series were built by multiple magma injections. In detail, textural and geochemical variations in olivine-rich troctolites and gabbronorites suggest chemical interaction (assimilation?) between the parental melt and the intruded lithosphere. Site U1309 gabbroic rocks do not represent the complementary magmatic product of 30°N volcanics, although they sample the same mantle source. The bulk trace element composition of Site U1309 gabbroic rocks is similar to primitive MORB melt compositions; this implies that there was no large scale removal of melts from this gabbro section. The occurrence of such a large magmatic sequence implies that a high magmatic activity is associated with the formation of Atlantis Massif. Our results suggest that almost all melts feeding this magmatic system stays trapped into the intruded lithosphere.

DEVELOPMENT OF A MECHANISM AND PROCESS TO CONTINUOUSLY PRODUCE SPHERICAL, TORREFIED BIOMASS PELLETS

A recently developed novel biomass fuel pellet, the Q’ Pellet, offers significant improvements over conventional white pellets, with characteristics comparable to those of coal. The Q’ Pellet was initially created at bench scale using a proprietary die and punch design, in which the biomass was torrefied in-situ¬ and then compressed. To bring the benefits of the Q’ Pellet to a commercial level, it must be capable of being produced in a continuous process at a competitive cost. A prototype machine was previously constructed in a first effort to assess continuous processing of the Q’ Pellet. The prototype torrefied biomass in a separate, ex-situ reactor and transported it into a rotary compression stage. Upon evaluation, parts of the prototype were found to be unsuccessful and required a redesign of the material transport method as well as the compression mechanism. A process was developed in which material was torrefied ex-situ and extruded in a pre-compression stage. The extruded biomass overcame multiple handling issues that had been experienced with un-densified biomass, facilitating efficient material transport. Biomass was extruded directly into a novel re-designed pelletizing die, which incorporated a removable cap, ejection pin and a die spring to accommodate a repeatable continuous process. Although after several uses the die required manual intervention due to minor design and manufacturing quality limitations, the system clearly demonstrated the capability of producing the Q’ Pellet in a continuous process. Q’ Pellets produced by the pre-compression method and pelletized in the re-designed die had an average dry basis gross calorific value of 22.04 MJ/kg, pellet durability index of 99.86% and dried to 6.2% of its initial mass following 24 hours submerged in water. This compares well with literature results of 21.29 MJ/kg, 100% pellet durability index and <5% mass increase in a water submersion test. These results indicate that the methods developed herein are capable of producing Q’ Pellets in a continuous process with fuel properties competitive with coal.

Strength of the Iberian intraplate lithosphere: Cenozoic deformations and seismicity

Previous studies about the strength of the lithosphere in the Iberia centre fail to resolve the depth of earthquakes because of the rheological uncertainties. Therefore, new contributions are considered (the crustal structure from a density model) and several parameters (tectonic regime, mantle rheology, strain rate) are checked in this paper to properly examine the role of lithospheric strength in the intraplate seismicity and the Cenozoic evolution. The strength distribution with depth, the integrated strength, the effective elastic thickness and the seismogenic thickness have been calculated by a finite element modelling of the lithosphere across the Central System mountain range and the bordering Duero and Madrid sedimentary basins. Only a dry mantle under strike-slip/extension and a strain rate of 10-15 s-1, or under extension and 10-16 s-1, causes a strong lithosphere. The integrated strength and the elastic thickness are lower in the mountain chain than in the basins. These anisotropies have been maintained since the Cenozoic and determine the mountain uplift and the biharmonic folding of the Iberian lithosphere during the Alpine deformations. The seismogenic thickness bounds the seismic activity in the upper–middle crust, and the decreasing crustal strength from the Duero Basin towards the Madrid Basin is related to a parallel increase in Plio–Quaternary deformations and seismicity. However, elasto–plastic modelling shows that current African–Eurasian convergence is resolved elastically or ductilely, which accounts for the low seismicity recorded in this region.

Ecophysiology of Adonis distorta, a high-mountain species endemic of the Central Apennines

Morphological, anatomical and physiological plant and leaf traits of A. distorta, an endemic species of the Central Apennines on the Majella Massif, growing at 2,675 m a.s.l, were analyzed. The length of the phenological cycle starts immediately after the snowmelt at the end of May, lasting 128 ± 10 days. The low A. distorta height  (Hmax= 64 ± 4 mm) and total leaf area (TLA= 38 ± 9 cm2) associated to a high leaf mass area (LMA =11.8±0.6 mg cm−2) and a relatively high leaf tissue density (LTD = 124.6±14.3 mg cm−3) seem to be adaptive traits to the stress factors of the environment where it grows. From a physiological point of view, the high A. distorta photosynthetic rates (PN =19.6 ± 2.3 µmol m−2 s−1) and total chlorophyll content (Chla+b = 0.88 ± 0.13 mg g−1) in July are justified by the favorable temperature. PN decreases by 87% in September at the beginning of plant senescence. Photosynthesis and leaf respiration (RD) variations allow A. distorta to maintain a positive carbon balance during the growing season becoming indicative of the efficiency of plant carbon use. The results could be an important tool for conservation programmes of the A. distorta wild populations.

John Tzetzes and the pseudo-Aristotelian Peplos in middle-Byzantium. The testimony of the Matritenses 4562 and 4621

Tras mi reciente edición de los pseudo-aristotélicos Pepli Epitaphia, el presente trabajo se centra en los apochrypha a dichos epitafios que compuso Juan Tzetzes en el siglo xii, un conjunto de ocho dísticos elegíacos para los héroes que consideró meritorios de tal tarea, y para quienes no pudo encontrar un epitafio conservado en las fuentes manuscritas a las que tuvo acceso. Para lograr dicho propósito, también se investiga el grado de conocimiento y la transmisión de ese corpus epigramático en la literatura bizantina, además de considerar las lecciones y el sentido mismo de dos códices guardados en la Biblioteca Nacional de España (M y Md). En ellos, Constantino Láscaris copió, directamente a partir de Tzetzes, dos breves antologías de dichos componentes.

STARTVerso1: A Randomized Trial of Faldaprevir Plus Pegylated Interferon/Ribavirin for Chronic HCV Genotype-1 Infection

BACKGROUND & AIMS: The efficacy and tolerability of faldaprevir, a potent hepatitis C virus (HCV) NS3/4A protease inhibitor, plus peginterferon (PegIFN) and ribavirin (RBV) was assessed in a double-blind, placebo-controlled phase 3 study of treatment-naïve patients with HCV genotype-1 infection. METHODS: Patients were randomly assigned (1:2:2) to PegIFN/RBV plus: placebo (arm 1, n = 132) for 24 weeks; faldaprevir (120 mg, once daily) for 12 or 24 weeks (arm 2, n = 259); or faldaprevir (240 mg, once daily) for 12 weeks (arm 3, n = 261). In arms 2 and 3, patients with early treatment success (HCV-RNA <25 IU/ml at week 4 and undetectable at week 8) stopped all treatment at week 24. Other patients received PegIFN/RBV until week 48 unless they met futility criteria. The primary endpoint was sustained virologic response 12 weeks post-treatment (SVR12). RESULTS: SVR12 was achieved by 52%, 79%, and 80% of patients in arms 1, 2, and 3, respectively (estimated difference for arms 2 and 3 vs. arm 1: 27%, 95% confidence interval 17%-36%; and 29%, 95% confidence interval, 19%-38%, respectively; p < 0.0001 for both). Early treatment success was achieved by 87% (arm 2) and 89% (arm 3) of patients, of whom 86% and 89% achieved SVR12. Adverse event rates were similar among groups; few adverse events led to discontinuation of all regimen components. CONCLUSIONS: Faldaprevir plus PegIFN/RBV significantly increased SVR12, compared with PegIFN/RBV, in treatment-naïve patients with HCV genotype-1 infection. No differences were seen in responses of patients given faldaprevir once daily at 120 or 240 mg.

Entrepreneurial skills of students of polytechnic higher education in Portugal: Business influences

Introduction: Most of entrepreneurial ideas does not appear ready or over. Any business opportunity needs to be developed and improved throughout the enterprise process. Educational institutions may facilitate the ability of the students had undertaken, identifying and building business opportunities, enhancing their knowledge and formative experiences along the learning process. Objectives: Evaluate the business influences the entrepreneurial ability of students of the Polytechnic. Methodology: Correlational quantitative study, conducted with 1604 students from 18 institutions of the Polytechnic of Portugal. Data collection took place between July and November/2015, with a questionnaire to assess the entrepreneurial profile, Carland Entrepreneurship Index (CEI) and sociodemographic variables of students. Results: We found four business factors that influence entrepreneurship, "availability of funds" (4:13, SD = .67); "Have stable customers and incentives" (3.99, SD = .58); "Social and economic instability" (3:08, SD = 1.17) and "opportunities in the sector and area of residence" (3:36, SD = 1.05). On a scale range between (1-5), we obtained an overall score of 3.86 (SD = .55), for the corporate influences on entrepreneurship. Conclusion: For students entrepreneurial influences are important, with a greater sense of fear with regard to economic instability, reinforcing the need for further training and academic investment in the business.

Entrepreneurial skills of students of polytechnic higher education in Portugal: Business influences

Background Most entrepreneurial ideas do not appear ready or finished. Any business opportunity needs to be developed and improved throughout the enterprise process. Educational institutions may facilitate the ability of the students in undertaking, identifying and building business opportunities, enhancing their knowledge and formative experiences along the learning process. Objective: Evaluate business influences on the entrepreneurial ability of students of the Polytechnic. Methods Correlational quantitative study, conducted with 1,604 students from 18 institutions of the Polytechnic of Portugal. Data collection took place between July and November/2015, with a questionnaire to assess the entrepreneurial profile, the Carland Entrepreneurship Index (CEI) and sociodemographic variables of students. Results We found four business factors that influence entrepreneurship: "availability of funds" (4:13, SD = .67); "Having stable customers and incentives" (3.99, SD = .58); "Social and economic instability" (3:08, SD = 1.17) and "Opportunities in the sector and area of residence" (3:36, SD = 1.05). On a scale ranging between 1 and 5, we obtained an overall score of 3.86 (SD = .55), for the corporate influences on entrepreneurship. Conclusions For students, entrepreneurial influences are important, with a greater sense of fear with regard to economic instability, reinforcing the need for further training and academic investment in business.

Voices of nigerian women survivors of trafficking held in italian centres for identification and expulsion

Department of Equal Opportunities; Presidency of the Council of Ministries; Province of Rome (metropolitan area)

Flixweed vs. Polyethylene Glycol in the Treatment of Childhood Functional Constipation: A Randomized Clinical Trial

Background: Polyethylene glycol (PEG) is often considered as the first-line treatment for functional constipation in children. Descurainia sophia (L.) Webb et Berth (D. sophia) is a safe recommended medicine in Iranian folk and Traditional Persian Medicine for the treatment of constipation. Objectives: To clinically compare D. sophia with PEG 4000 (without electrolyte) in pediatric constipation and to assess its efficacy and side effects. Patients and Methods: 120 patients aged 2 - 12 years with constipation for at least 3 months were included in an 8 weeks lasting randomized controlled trial within two parallel-groups. Children received either PEG, 0.4 g/kg/day, or D. sophia seeds, 2 grams (for children aged 2 - 4 years) and 3 grams (for those aged > 4 years) per day. Results: A total of 109 patients completed the study (56 in D. sophia and 53 in PEG group). At the end of the study, 36 (64.3%) patients in D. sophia group and 29 (54.7%) in PEG group were out of Rome III criteria (P = 0.205). Median weekly stool frequency in 0, 1, 2, 3 weeks of the treatment was found to be 2, 5, 5, 5 in D. sophia and 3, 4, 4, 5 in PEG group (P = 0.139, 0.076, 0.844, 0.294), respectively. The number of patients who suffered flatulence was less (5, 8.9%) in D. sophia group as compared to PEG group (6, 11.3%) at the end of the trial (P = 0.461). D. sophia taste was less tolerated. Conclusions: D. sophia is introduced as a cheap and available medication which can be applied as a safe alternative to conventional PEG in the management of pediatric chronic functional constipation.

Development and optimization of fluoxetine orally disintegrating tablets using Box-Behnken design

Purpose: To develop and optimise some variables that influence fluoxetine orally disintegrating tablets (ODTs) formulation. Methods: Fluoxetine ODTs tablets were prepared using direct compression method. Three-factor, 3- level Box-Behnken design was used to optimize and develop fluoxetine ODT formulation. The design suggested 15 formulations of different lubricant concentration (X1), lubricant mixing time (X2), and compression force (X3) and then their effect was monitored on tablet weight (Y1), thickness (Y2), hardness (Y3), % friability (Y4), and disintegration time (Y5). Results: All powder blends showed acceptable flow properties, ranging from good to excellent. The disintegration time (Y5) was affected directly by lubricant concentration (X1). Lubricant mixing time (X2) had a direct effect on tablet thickness (Y2) and hardness (Y3), while compression force (X3) had a direct impact on tablet hardness (Y3), % friability (Y4) and disintegration time (Y5). Accordingly, Box-Behnken design suggested an optimized formula of 0.86 mg (X1), 15.3 min (X2), and 10.6 KN (X3). Finally, the prediction error percentage responses of Y1, Y2, Y3, Y4, and Y5 were 0.31, 0.52, 2.13, 3.92 and 3.75 %, respectively. Formula 4 and 8 achieved 90 % of drug release within the first 5 min of dissolution test. Conclusion: Fluoxetine ODT formulation has been developed and optimized successfully using Box- Behnken design and has also been manufactured efficiently using direct compression technique.

Nutritional requirements of the critically ill patient

Objective: Given the inaccessibility of indirect calorimetry, intensive care units generally use predictive equations or recommendations that are established by international societies to determine energy expenditure. The aim of the present study was to compare the energy expenditure of critically ill patients, as determined using indirect calorimetry, to the values obtained using the Harris-Benedict equation. Methods: A retrospective observational study was conducted at the Intensive Care Unit 1 of the Centro Hospitalar do Porto. The energy requirements of hospitalized critically ill patients as determined using indirect calorimetry were assessed between January 2003 and April 2012. The accuracy (± 10% difference between the measured and estimated values), the mean differences and the limits of agreement were determined for the studied equations. Results: Eighty-five patients were assessed using 288 indirect calorimetry measurements. The following energy requirement values were obtained for the different methods: 1,753.98±391.13 kcal/ day (24.48 ± 5.95 kcal/kg/day) for indirect calorimetry and 1,504.11 ± 266.99 kcal/day (20.72±2.43 kcal/kg/day) for the HarrisBenedict equation. The equation had a precision of 31.76% with a mean difference of -259.86 kcal/day and limits of agreement between -858.84 and 339.12 kcal/day. Sex (p=0.023), temperature (p=0.009) and body mass index (p< 0.001) were found to significantly affect energy expenditure Conclusion: The Harris-Benedict equation is inaccurate and tends to underestimate energy expenditure. In addition, the Harris-Benedict equation is associated with significant differences between the predicted and true energy expenditure at an individual level

Detection and Grading of Prostate Cancer in Temporal Enhanced Ultrasound using Convolutional Neural Networks

Prostate cancer is the most common non-dermatological cancer amongst men in the developed world. The current definitive diagnosis is core needle biopsy guided by transrectal ultrasound. However, this method suffers from low sensitivity and specificity in detecting cancer. Recently, a new ultrasound based tissue typing approach has been proposed, known as temporal enhanced ultrasound (TeUS). In this approach, a set of temporal ultrasound frames is collected from a stationary tissue location without any intentional mechanical excitation. The main aim of this thesis is to implement a deep learning-based solution for prostate cancer detection and grading using TeUS data. In the proposed solution, convolutional neural networks are trained to extract high-level features from time domain TeUS data in temporally and spatially adjacent frames in nine in vivo prostatectomy cases. This approach avoids information loss due to feature extraction and also improves cancer detection rate. The output likelihoods of two TeUS arrangements are then combined to form our novel decision support system. This deep learning-based approach results in the area under the receiver operating characteristic curve (AUC) of 0.80 and 0.73 for prostate cancer detection and grading, respectively, in leave-one-patient-out cross-validation. Recently, multi-parametric magnetic resonance imaging (mp-MRI) has been utilized to improve detection rate of aggressive prostate cancer. In this thesis, for the first time, we present the fusion of mp-MRI and TeUS for characterization of prostate cancer to compensates the deficiencies of each image modalities and improve cancer detection rate. The results obtained using TeUS are fused with those attained using consolidated mp-MRI maps from multiple MR modalities and cancer delineations on those by multiple clinicians. The proposed fusion approach yields the AUC of 0.86 in prostate cancer detection. The outcomes of this thesis emphasize the viable potential of TeUS as a tissue typing method. Employing this ultrasound-based intervention, which is non-invasive and inexpensive, can be a valuable and practical addition to enhance the current prostate cancer detection.