Lentosääennusteiden merkitys

Tässä työssä selvitetään lentosääennusteiden käyttöä lennon suunnittelun ja toteutuksen perusteena. Tuodaan esille määräyksiä ja lentosäätietojen käyttöä kaikissa lennon vaiheissa. Perehdytään ennustettujen olosuhteiden ja ennusteiden laadun merkitykseen lentojen toteutuksessa. Selvitetään lentosääennusteisiin liittyviä lentoliikenteen kustannuksia. Työn aineistona käytettiin joulukuu 2006 - heinäkuu 2007 välisenä aikana eri pituisina jaksoina kerättyä 185 liikennelennon lennonsuunnittelumateriaalia ja 126 satunnaisella otoksella otettuja Suomen GAFOR -ennusteita. Liikennelennot toteutettiin Suomen ja Euroopan alueella. Työssä todennettiin METAR –lentopaikkasanoman avulla TAF -lentopaikka-, TREND -laskeutumis-, GAFOR -yleisilmailuennusteita. Yleisestä sääpalvelusta saatua materiaalia käsiteltiin EXCEL –taulukkolaskentaohjelmalla Lentosääennusteita käsiteltiin usean eri käyttäjäryhmän kannalta. Reittilentomittauksilla tutkittiin SIGMET –varoituspalvelun, SWC –merkitsevän sään ja yläilmakehän tuulen sekä lämpötilan ennusteita. TAF –pilvikorkeusennusteiden keskimääräinen hyvyysluku oli lähes sama pilvikorkeudesta riippumatta. Suhteellisen hyvissä olosuhteissa toimivat käyttäjät saivat ennusteista paljon hyötyä. Vaakanäkyvyysennusteiden keskimääräinen hyvyysluku oli suurempi hyvissä kuin huonoissa olosuhteissa. Huonojen olosuhteiden ennusteet olivat lentotoiminnalle enemmän harmillisia kuin hyödyllisiä. Ennustustyö olisi tarvinnut apuvälinettä. Tutkittiin TREND –ennusteiden ominaista osuvuutta. NOSIG –ennuste oli suhteellisen usein julkaistu vaikka sitä seurasi olosuhteen muutos. BECMG -ennuste toteutui pääsääntöisesti ennusteajan alkupuolella. Ajoittaisten olosuhdemuutosten aikana TEMPO -ennusteita julkaistiin hyvin, mutta ennusteen osuvuus vaihteli. Tässä muodossa jaettu ennustetieto ei palvele kovin hyvin päätöstilannetta, jossa on arvioitava polttoaineen riittävyys lennon loppuosalle. GAFOR -pintatuuliennusteet olivat onnistuneita kuten TAF -ennusteissa. Vaakanäkyvyys- ja pilvikorkeusolosuhteissa vertailupisteissä oli 10% havainnoista ennustettua huonompaa olosuhdetta, jos käytettiin vain GAFOR –ennusteen perusosaa lennonsuunnittelussa ja 6% havainnoista, jos käytettiin koko ennustetta. Ilma-aluksen päällikön on valvottava näkölento-olosuhteiden kehitystä lennon aikana ja varmistettava aina näkölento-olosuhteinen lentoreitti laskupaikalle. Lentosääennusteet ovat osa lentotoimintaa mahdollistavaa järjestelmää. Ennusteet hallitsevat vaihtelevasti olosuhteita ja luonnollisesti aiheuttavat ongelmallisia tilanteita. Käyttäjiä sitovat määräykset on luotu, jotta toiminta olisi turvallista. Laadukkaita ennusteita tarvitaan isoilla liikennepaikoilla lentoliikenteen kapasiteetin hallintaan. Pienillä lentopaikoilla laitevarustus ei vielä takaa lentotoimintaa kaikissa olosuhteissa. Näkölentotoimintaa harjoitetaan jatkuvasti sekä hyvissä että kohtalaisen huonoissa olosuhteissa.

Kaksikertasironnan simulointi

Mahdollisimman tarkka tieto varatun hiukkasen energianmenetyksestä sen kulkiessa näytteessä on usein hyvin olennaista varteenotettavien tutkimustulosten aikaansaamiseksi monilla eri fysiikan suuntautumisaloilla. Aihe onkin hyvin laajalti tutkittu. Kehityksen kuitenkin edetessä yhä pienempiin mittasuhteisiin ja tarkempiin arvoihin on tärkeää, että myös ionien energianmenetyksestä väliaineessa saadaan yhä tarkempaa tietoa. Takaisinsirontaspektrometriassa tarkastellaan näytteestä sironneita ammusioneja. Takaisinsironnan avulla voidaan tunnistaa näytteen sisältämät alkuaineet, selvittää syvyysjakauma ja näytteen alkuaineiden suhteelliset runsaudet. Menetelmään liittyvät ilmiöt ovat varsin monimutkaisia ja niiden teoreettinen mallintaminen siten haasteellista. Kun tavoitteena on simuloida mahdollisimman tarkasti tilannetta, jossa kiihdytetty ioni etenee näytteessä ei analyyttinen ratkaisumalli välttämättä ole paras vaihtoehto. Tilannetta kuvaamaan onkin kehitetty useita eri laskennallisia menetelmiä. Tässä työssä tarkasteltiin sitä kuinka paljon kaksikertasironnan huomioon ottaminen vaikuttaa tuloksiin takaisinsirontaa simuloitaessa. Useimmat takaisinsironnan mallinnusohjelmat ottavat huomioon ainoastaan yksikertasironnan. Tämä on varsin ymmärrettävää, sillä jo toisen sirontatapahtuman huomioon ottaminen ja mallintaminen analyyttisesti lisää huomattavasti simulaation laskutapahtumien lukumäärää ja hidastaa siten itse simulaatiota. Työtä varten kirjoitettiin ohjelma, jolla simuloituja tuloksia verrattiin sekä näytteistä mitattuihin että toisella simulaatio-ohjelmalla tuotettuihin spektreihin. Vertailusta kävi selvästi ilmi kaksikertasironnan merkitys takaisinsirontaa simuloitaessa. Yksikertasironnan tuoma informaatio päättyy energiaan, jolla näytteen takareunasta sironnut ioni havaitaan ilmaisimessa. Toisen sirontatapahtuman huomioon ottaminen tuo lisäinformaatiota etenkin spektrin häntäalueella. Laaditulla ohjelmalla pystyttiin nyt käsittelemään ainoastaan erikoistapausta, jossa ionisuihku ammuttiin kohtisuoraan näytteeseen. Looginen jatkotoimenpide työn parissa olisi laajentaa ohjelma käsittämään muutkin ionisuihkun tulokulmat.

Suomen talviukkoset 2003-2007

Tutkimuksen tarkoitus on kartoittaa Suomen talviukkosten ominaisuuksia ja klimatologiaa. Tiedot Suomen talviukkosten klimatologista tutkimusta varten kerättiin mm. salamanpaikantimilta ja ihmisten IL:lle tiedottamista havainnoista, SYNOP-kartoilta, rintama-analyyseistä, luotauksista ja luotaustietojen pohjalta piirretyistä salamakartoista sekä sadetutkan kuvista. Tutkimuksessa määriteltiin talviukkoseksi yksi tai useampi salamahavainto säätilanteessa, jossa salamahavaintopaikkaan ja -aikaan nähden lähimmistä synop-havainnoista ainakin yhdessä on havaittu joko ≤ 0 °C lämpötila tai lumi- tai räntäsadetta. Näin rajattuna vuosina 2003-2007 talviukkostapauksia oli 19 kpl. Tapaukset jakaantuivat melko tasaisesti loka-marraskuun vaihteen ja huhtikuun välille, pienet maksimit olivat marras- ja helmikuussa. Tapausten esiintymisajankohtia rajoitti siis vain talviukkosten määritelmän mukaisten sääolosuhteiden esiintyminen. Vuorokaudenajalla ei ollut merkittävää vaikutusta talvisalamoiden esiintymiselle. Alueellisesti talviukkoset painottuivat maan lounaisosaan mutta niitä havaittiin koko maassa Käsivarren Lappia myöten. 16 tapauksessa 19:sta talviukkoset havaittiin okluusiorintamaksi analysoidun rintaman yhteydessä. Yhdessä tapauksessa rintama oli analysoitu kylmäksi ja kahdessa rintama-analyysi oli epäselvä. Matalapaineen keskus sijaitsi iskuhavaintopaikkoihin nähden yleensä lännen puolella. Lännen puolen yleisyyden aiheutti okluusiorintamien kiertosuunta myötäpäivään matalapaineen keskukseen nähden. Pintalämpötila oli lähes kaikissa talviukkostapauksissa lähellä nollaa ja havaintopaikan lähellä olevissa SYNOP-havainnoissa havaittiin useissa tapauksissa sadetta sekä vetenä että kiinteässä olomuodossa. CAPE:n arvot olivat joko nollassa tai hyvin lähellä sitä iskuhavaintoihin nähden lähimmissä luotauksissa. Lämmintä advektiota havaittiin lähes kaikissa tutkituissa luotauksissa, myös sulan meren vaikutus näkyi tuloksissa talviukkosia edistävänä tekijänä. Maasalamoita havaittiin talviukkosten yhteydessä useimmin 1 tai 2 ja iskuja salamaa kohden 1 tai 2. Havaituista maasalamoista positiivisia oli 46 % ja negatiivisia 54 %. Tapaustutkimukset tehtiin kahdesta vuosien 2003-2007 talviukkosia hyvin edustavasta tapauksesta sekä yhdestä salamamäärältään poikkeuksellisen runsaasta tapauksesta.

Multiangular Spectrometry and Optical Properties of Debris Covered Surfaces

Due to the recent development in CCD technology aerial photography is now slowly changing from film to digital cameras. This new aspect in remote sensing allows and requires also new automated analysis methods. Basic research on reflectance properties of natural targets is needed so that computerized processes could be fully utilized. For this reason an instrument was developed at Finnish Geodetic Institute for measurement of multiangular reflectance of small remote sensing targets e.g. forest understorey or asphalt. Finnish Geodetic Institute Field Goniospectrometer (FiGIFiGo) is a portable device that is operated by 1 or 2 persons. It can be reassembled to a new location in 15 minutes and after that a target's multiangular reflectance can be measured in 10 - 30 minutes (with one illumination angle). FiGIFiGo has effective spectral range approximately from 400 nm to 2000 nm. The measurements can be made either outside with sunlight or in laboratory with 1000 W QTH light source. In this thesis FiGIFiGo is introduced and the theoretical basis of such reflectance measurements are discussed. A new method is introduced for extraction of subcomponent proportions from reflectance of a mixture sample, e.g. for retrieving proportion of lingonberry's reflectance in observation of lingonberry-lichen sample. This method was tested by conducting a series of measurements on reflectance properties of artificial samples. The component separation method yielded sound results and brought up interesting aspects in targets' reflectances. The method and the results still need to be verified with further studies, but the preliminary results imply that this method could be a valuable tool in analysis of such mixture samples.

Sademääräsimulaatiot ENSEMBLES-hankkeen alueellisissa ilmastomalleissa

Alueellisten ilmastomallien vaakasuuntainen erottelukyky on globaaleja malleja huomattavasti tarkempi, minkä vuoksi niillä on useita käyttökohteita ilmastonmuutoksen vaikutusten arvioinnissa. Tässä Pro Gradu – työssä tutkittiin alueellisten ilmastomallien tuottamia sademääräsimulaatioita sekä sadehavaintoaineistoja Euroopassa. Aineistona käytettiin ENSEMBLES-hankkeen tarjoamia 10 alueellista ilmastosimulaatiota, kahta hilamuotoista havaintoaineistoa sekä Ilmatieteen laitoksen sadeasemahavaintoja. Aineisto oli päiväkohtaista. Vuositasolla ilmastomallit ovat pääsääntöisesti sademäärää yliennustavia, mutta harha vaihtelee alueiden ja vuodenaikojen kesken. Osa tästä harhasta selittyy kuitenkin sillä, että havaintoaineistoihin sisältyy tyypillisesti sademäärän mittaustapahtumasta aiheutuva virhe. Alueellisten simulaatioiden harha pyritään minimoimaan kun halutaan kvantifioida tulevaisuuden sademääriä ilmastomallitulosten avulla. Tutkimuksessa sovellettiin tähän tarkoitettua empiiristä korjausmenetelmää tapauskohtaisella testialueella Suomessa. Korjausmenetelmä huomioi sadetapahtumien harhan niiden intensiteetin mukaan, jolloin se periaatteessa soveltuu paremmin myös rankkasateiden korjaamiseen. Korjausmenetelmässä harhan riippuvuus sadetapahtuman intensiteetistä oletetaan skenaariojaksolla samaksi kuin vertailujaksolla. Edellytyksenä korjausmenetelmän käytölle on se, että sadetapahtumien intensiteettijakauma simulaatioaineistoissa on kohtuullisen lähellä havaittua jakaumaa. Korjausmenetelmä parantaa sademäärän vuodenaikaiskeskiarvoja tarkastelualueella vertailujaksolla, vuoden kokonaissadekertymän harhan suuruus aineiston keskiarvossa on vain 7 mm. Koska sadetapahtumien intensiteettijakauma muuttuu simulaatioissa vertailu- ja skenaariojaksojen välillä, korjausmenetelmä vaikuttaa kuitenkin sademäärän muutoksen suuruuteen. Lisäksi menetelmän vaikutus sademäärän muutokseen jakautuu epätasaisesti sadetapahtuman intensiteetistä riippuen: menetelmä pienentää rankkasateiden kertymien muutosta, mutta kasvattaa sitä tavallisten sadetapahtumien osalta. Rankkasadetapahtumien erilliskäsittely korjausmenetelmässä aiheuttaa sen, että korjatusta sadetapahtumien intensiteettijakaumasta tulee epäjatkuva riippumatta siitä, mikä tarkastelujakso on kyseessä. Tässä työssä käytetty korjausmenetelmä ei ole ainoa laatuaan, perinteisesti mallitulosten korjaamiseen on käytetty vakiokertoimiin perustuvaa menetelmää kaikille sadetapahtumille. Korjausmenetelmien testaaminen on monien sovellusten kannalta tärkeää, mutta parhaan menetelmän löytäminen ei ole yksiselitteisen helppoa. Globaaleihin malleihin verrattuna alueellisten ilmastomallien ja korjausmenetelmien käyttö aiheuttavat molemmat ylimääräisen epävarmuuslähteen ilmastosimulaatioihin.

Lumi ilmaston osana - Lumen vesiarvon ja pinnan albedon mallintaminen Pohjois-Euraasian alueella

Työssä tarkasteltiin ilmakehän yleisen kiertoliikkeen mallin, ECHAM5:n, ja Euroopan keskipitkien sääennusteiden keskuksen uudelleenanalyysijärjestelmän, ERA-40:n, lumen vesiarvon ja lumisten alueiden pinnan albedon mallintamista. Tarkoituksena oli selvittää näiden välisiä eroja sekä sitä, kuinka hyvin ECHAM5 kuvaa nykyilmaston lumioloja. Esimerkinomaisesti tarkasteltiin myös Rossby-keskuksen alueellisen ilmastomallin, RCA3:n, lumen mallintamistapaa. ECHAM5-simulaatioissa käytetty pakote oli havaintojen mukainen meriveden pintalämpötilan ja merijään jakauma. ECHAM5:n ja ERA-40:n aineistoja vertailtiin jaksolla 1986-1990 Pohjois-Euraasian alueella. ERA-40:n lumen vesiarvoja verrattiin lisäksi INTAS-SCCONE-hankkeen havaintoaineistoon. Saatujen tulosten mukaan ECHAM5:n lumen vesiarvo oli monilla alueilla ERA-40:n lumen vesiarvoa pienempi. Suurimmillaan erot olivat vesiarvon maksimialueilla Euraasian keskiosissa. ECHAM5:ssä myös eri vuosien välinen vaihtelu oli pienempää kuin ERA-40:ssä. Varsinkin tarkastelujakson viimeisinä vuosina, 1989 ja 1990, lumen vesiarvo sai Pohjois-Euroopan alueella ERA-40:n mukaan hyvin matalia arvoja, jotka selittyvät NAO-indeksin korkeilla arvoilla. NAO-ilmiön voimakkuus 1980-luvun lopulla ei kuitenkaan erotu ECHAM5:n lumen vesiarvossa. ERA-40:n lumianalyysissä on mukana lumensyvyyshavaintoja, mikä on suurin tuloksiin eroa aiheuttava tekijä. Lienee myös mahdollista, että ECHAM5-simulaatioissa käytetty pakote ei ole riittävän voimakas tuottamaan kaikilta osin realistista lumen vesiarvon jakaumaa. ERA-40:n ja INTAS-SCCONE-aineiston välillä ei ollut kovin suuria eroja. Lumisten alueiden pinnan albedon osana käytetty lumialbedo on ERA-40:ssä ennustettava muuttuja, ECHAM5:ssä se parametrisoidaan. Saatujen tulosten mukaan pinnan albedon arvot ovat ECHAM5:ssä laajalti suurempia kuin ERA-40:ssä. Erot aiheutuvat albedojen erilaisesta laskentatavasta sekä mallien erilaisista kasvillisuusjakaumista. ECHAM5 aliarvioi kasvillisuuden albedoa pienentävän vaikutuksen varsinkin pohjoisen havumetsävyöhykkeen alueella. ERA-40:n pinnan albedo lieneekin realistisempi kuin ECHAM5:n.

Miniaturized mass spectrometric ionization techniques for environmental analysis and bioanalysis

Miniaturized mass spectrometric ionization techniques for environmental analysis and bioanalysis Novel miniaturized mass spectrometric ionization techniques based on atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) were studied and evaluated in the analysis of environmental samples and biosamples. The three analytical systems investigated here were gas chromatography-microchip atmospheric pressure chemical ionization-mass spectrometry (GC-µAPCI-MS) and gas chromatography-microchip atmospheric pressure photoionization-mass spectrometry (GC-µAPPI-MS), where sample pretreatment and chromatographic separation precede ionization, and desorption atmospheric pressure photoionization-mass spectrometry (DAPPI-MS), where the samples are analyzed either as such or after minimal pretreatment. The gas chromatography-microchip atmospheric pressure ionization-mass spectrometry (GC-µAPI-MS) instrumentations were used in the analysis of polychlorinated biphenyls (PCBs) in negative ion mode and 2-quinolinone-derived selective androgen receptor modulators (SARMs) in positive ion mode. The analytical characteristics (i.e., limits of detection, linear ranges, and repeatabilities) of the methods were evaluated with PCB standards and SARMs in urine. All methods showed good analytical characteristics and potential for quantitative environmental analysis or bioanalysis. Desorption and ionization mechanisms in DAPPI were studied. Desorption was found to be a thermal process, with the efficiency strongly depending on thermal conductivity of the sampling surface. Probably the size and polarity of the analyte also play a role. In positive ion mode, the ionization is dependent on the ionization energy and proton affinity of the analyte and the spray solvent, while in negative ion mode the ionization mechanism is determined by the electron affinity and gas-phase acidity of the analyte and the spray solvent. DAPPI-MS was tested in the fast screening analysis of environmental, food, and forensic samples, and the results demonstrated the feasibility of DAPPI-MS for rapid screening analysis of authentic samples.

Regio- and stereoselectivity of oxidative coupling reactions of phenols : Spirodienones as construction units in lignin

Dimeric phenolic compounds lignans and dilignols form in the so-called oxidative coupling reaction of phenols. Enzymes such as peroxidases and lac-cases catalyze the reaction using hydrogen peroxide or oxygen respectively as oxidant generating phenoxy radicals which couple together according to certain rules. In this thesis, the effects of the structures of starting materials mono-lignols and the effects of reaction conditions such as pH and solvent system on this coupling mechanism and on its regio- and stereoselectivity have been studied. After the primary coupling of two phenoxy radicals a very reactive quinone me-thide intermediate is formed. This intermediate reacts quickly with a suitable nucleophile which can be, for example, an intramolecular hydroxyl group or another nucleophile such as water, methanol, or a phenolic compound in the reaction system. This reaction is catalyzed by acids. After the nucleophilic addi-tion to the quinone methide, other hydrolytic reactions, rearrangements, and elimination reactions occur leading finally to stable dimeric structures called lignans or dilignols. Similar reactions occur also in the so-called lignification process when monolignol (or dilignol) reacts with the growing lignin polymer. New kinds of structures have been observed in this thesis. The dimeric com-pounds with so-called spirodienone structure have been observed to form both in the dehydrodimerization of methyl sinapate and in the beta-1-type cross-coupling reaction of two different monolignols. This beta-1-type dilignol with a spirodienone structure was the first synthetized and published dilignol model compound, and at present, it has been observed to exist as a fundamental construction unit in lignins. The enantioselectivity of the oxidative coupling reaction was also studied for obtaining enantiopure lignans and dilignols. A rather good enantioselectivity was obtained in the oxidative coupling reaction of two monolignols with chiral auxiliary substituents using peroxidase/H2O2 as an oxidation system. This observation was published as one of the first enantioselective oxidative coupling reaction of phenols. Pure enantiomers of lignans were also obtained by using chiral cryogenic chromatography as a chiral resolution technique. This technique was shown to be an alternative route to prepare enantiopure lignans or lignin model compounds in a preparative scale.

Polymerization of Ethene and Branched α-olefins with Group IV Metal Complexes Bearing Nitrogen- and Oxygen-Based Ligands

The commodity plastics that are used in our everyday lives are based on polyolefin resins and they find wide variety of applications in several areas. Most of the production is carried out in catalyzed low pressure processes. As a consequence polymerization of ethene and α-olefins has been one of the focus areas for catalyst research both in industry and academia. Enormous amount of effort have been dedicated to fine tune the processes and to obtain better control of the polymerization and to produce tailored polymer structures The literature review of the thesis concentrates on the use of Group IV metal complexes as catalysts for polymerization of ethene and branched α-olefins. More precisely the review is focused on the use of complexes bearing [O,O] and [O,N] type ligands which have gained considerable interest. Effects of the ligand framework as well as mechanical and fluxional behaviour of the complexes are discussed. The experimental part consists mainly of development of new Group IV metal complexes bearing [O,O] and [O,N] ligands and their use as catalysts precursors in ethene polymerization. Part of the experimental work deals with usage of high-throughput techniques in tailoring properties of new polymer materials which are synthesized using Group IV complexes as catalysts. It is known that the by changing the steric and electronic properties of the ligand framework it is possible to fine tune the catalyst and to gain control over the polymerization reaction. This is why in this thesis the complex structures were designed so that the ligand frameworks could be fairly easily modified. All together 14 complexes were synthesised and used as catalysts in ethene polymerizations. It was found that the ligand framework did have an impact within the studied catalyst families. The activities of the catalysts were affected by the changes in complex structure and also effects on the produced polymers were observed: molecular weights and molecular weight distributions were depended on the used catalyst structure. Some catalysts also produced bi- or multi-modal polymers. During last decade high-throughput techniques developed in pharmaceutical industries have been adopted into polyolefin research in order to speed-up and optimize the catalyst candidates. These methods can now be regarded as established method suitable for both academia and industry alike. These high-throughput techniques were used in tailoring poly(4-methyl-1-pentene) polymers which were synthesized using Group IV metal complexes as catalysts. This work done in this thesis represents the first successful example where the high-throughput synthesis techniques are combined with high-throughput mechanical testing techniques to speed-up the discovery process for new polymer materials.

Atomic Layer Deposition of Electroluminescent ZnS, SrS, and BaS Thin Films

The light emitted by flat panel displays (FPD) can be generated in many different ways, such as for example alternating current thin film electroluminescence (ACTFEL), liquid crystal display (LCD), light emitting diode (LED), or plasma display panel (PDP) technologies. In this work, the focus was on ACTFEL devices and the goal was to develop new thin film processes for light emitting materials in ACTFEL devices. The films were deposited with the atomic layer deposition (ALD) method, which has been utilized in the manufacturing of ACTFEL displays since the mid-1980s. The ALD method is based on surface-controlled self-terminated reactions and a maximum of one layer of the desired material can be prepared during one deposition cycle. Therefore, the film thickness can be controlled simply by adjusting the number of deposition cycles. In addition, both large areas and deep trench structures can be covered uniformly. During this work, new ALD processes were developed for the following thin film materials: BaS, CuxS, MnS, PbS, SrS, SrSe, SrTe, SrS1-xSex, ZnS, and ZnS1-xSex. In addition, several ACTFEL devices were prepared where the light emitting material was BaS, SrS, SrS1-xSex, ZnS, or ZnS1-xSex thin film that was doped with Ce, Cu, Eu, Mn, or Pb. The sulfoselenide films were made by substituting the elemental selenium for sulfur on the substrate surface during film deposition. In this way, it was possible to replace a maximum of 90% of the sulfur with selenium, and the XRD analyses indicated that the films were solid solutions. The polycrystalline BaS, SrS, and ZnS thin films were deposited at 180-400, 120-460, and 280-500 °C, respectively, and the processes had a wide temperature range where the growth rate of the films was independent of the deposition temperature. The electroluminescence studies showed that the doped sulfoselenide films resulted in low emission intensity. However, the emission intensities and emission colors of the doped SrS, BaS, and ZnS films were comparable with those found in earlier studies. It was also shown that the electro-optical properties of the different ZnS:Mn devices were different as a consequence of different ZnS:Mn processes. Finally, it was concluded that because the higher deposition temperature seemed to result in a higher emission intensity, the thermal stability of the reactants has a significant role when the light emitting materials of ACTFEL devices are deposited with the ALD method.

Properties of Ammonium Nitrate based fertilisers

The text is divided into three parts; Properties, Application and Safety of Ammonium Nitrate (AN) based fertilisers. In Properties, the structures and phase transitions of ammonium and potassium nitrate are reviewed. The consequences of phase transitions affect the proper use of fertilisers. Therefore the products must be stabilised against the volume changes and consequent loss of bulk density and hardness, formation of dust and finally caking of fertilisers. The effect of different stabilisers is discussed. Magnesium nitrate, ammonium sulphate and potassium nitrate are presented as a good compromise. In the Application part, the solid solutions in the systems (K+,NH4+)NO3- and (NH4+,K+)(Cl-,NO3-) are presented based on studies made with DSC and XRD. As there are clear limits for solute content in the solvent lattice, a number of disproportionation transitions exist in these process phases, e.g., N3 (solid solution isomorphous to NH4NO3-III) disproportionates to phases K3 (solid solution isomorphous to KNO3-III) and K2 (solid solution isomorphous to KNO3-II). In the crystallisation experiments, the formation of K3 depends upon temperature and the ratio K/(K+NH4). The formation of phases K3, N3, and K2 was modelled as a function of temperature and the mole ratios. In introducing chlorides, two distinct maxima for K3 were found. Confirmed with commercial potash samples, the variables affecting the reaction of potassium chloride with AN are the particle size, time, temperature, moisture content and amount of organic coating. The phase diagrams obtained by crystallisation studies were compared with a number of commercial fertilisers and, with regard to phase composition, the temperature and moisture content are critical when the formation and stability of solid solutions are considered. The temperature where the AN-based fertiliser is solidified affects the amount of compounds crystallised at that point. In addition, the temperature where the final moisture is evaporated affects the amount and type of solid solution formed at this temperature. The amount of remaining moisture affects the stability of the K3 phase. The K3 phase is dissolved by the moisture and recrystallised into the quantities of K3, which is stable at the temperature where the sample is kept. The remaining moisture should not be free; it should be bound as water in the final product. The temperatures during storage also affect the quantity of K3 phase. As presented in the figures, K3 phase is not stable at temperatu¬res below 30 °C. If the temperature is about 40 °C, the K3 phase can be formed due to the remaining moisture. In the Safety part, self-sustaining decomposition (SSD), oxidising and energetic properties of fertilisers are discussed. Based on the consequence analysis of SSD, early detection of decomposition in warehouses and proper temperature control in the manufacturing process is important. SSD and oxidising properties were found in compositions where K3 exists. It is assumed that potassium nitrate forms a solid matrix in which AN can decompose. The oxidising properties can be affected by the form of the product. Granular products are inherently less oxidising. Finally energetic properties are reviewed. The composition of the fertiliser has an importance based on theoretical calculations supported by experimental studies. Materials such as carbonates and sulphates act as diluents. An excess of ammonium ions acts as a fuel although this is debatable. Based on the experimental work, the physical properties have a major importance over the composition. A high bulk density is of key importance for detonation resistance.

F-18 Labelling Synthesis, Radioanalysis and Evaluation of A Dopamine Transporter and A Hypoxia Tracer

Positron emission tomography (PET) is an imaging technique in which radioactive positron-emitting tracers are used to study biochemical and physiological functions in humans and in animal experiments. The use of PET imaging has increased rapidly in recent years, as have special requirements in the fields of neurology and oncology for the development of syntheses for new, more specific and selective radiotracers. Synthesis development and automation are necessary when high amounts of radioactivity are needed for multiple PET studies. In addition, preclinical studies using experimental animal models are necessary for evaluating the suitability of new PET tracers for humans. For purification and analysing the labelled end-product, an effective radioanalytical method combined with an optimal radioactivity detection technique is of great importance. In this study, a fluorine-18 labelling synthesis method for two tracers was developed and optimized, and the usefulness of these tracers for possible prospective human studies was evaluated. N-(3-[18F]fluoropropyl)-2β-carbomethoxy-3β-(4-fluorophenyl)nortropane ([18F]β-CFT-FP) is a candidate PET tracer for the dopamine transporter (DAT), and 1H-1-(3-[18F]fluoro-2-hydroxypropyl)-2-nitroimidazole ([18F]FMISO) is a well-known hypoxia marker for hypoxic but viable cells in tumours. The methodological aim of this thesis was to evaluate the status of thin-layer chromatography (TLC) combined with proper radioactivity detection measurement systems as a radioanalytical method. Three different detection methods of radioactivity were compared: radioactivity scanning, film autoradiography, and digital photostimulated luminescence (PSL) autoradiography. The fluorine-18 labelling synthesis for [18F]β-CFT-FP was developed and carbon-11 labelled [11C]β-CFT-FP was used to study the specificity of β-CFT-FP for the DAT sites in human post-mortem brain slices. These in vitro studies showed that β-CFT-FP binds to the caudate-putamen, an area rich of DAT. The synthesis of fluorine-18 labelled [18F]FMISO was optimized, and the tracer was prepared using an automated system with good and reproducible yields. In preclinical studies, the action of the radiation sensitizer estramustine phosphate on the radiation treatment and uptake of [18F]FMISO was evaluated, with results of great importance for later human studies. The methodological part of this thesis showed that radioTLC is the method of choice when combined with an appropriate radioactivity detection technique. Digital PSL autoradiography proved to be the most appropriate when compared to the radioactivity scanning and film autoradiography methods. The very high sensitivity, good resolution, and wide dynamic range of digital PSL autoradiography are its advantages in detection of β-emitting radiolabelled substances.

Atomic Layer Deposition for optical applications: metal fluoride thin films and novel devices

Thin films of various metal fluorides are suited for optical coatings from infrared (IR) to ultraviolet (UV) range due to their excellent light transmission. In this work, novel metal fluoride processes have been developed for atomic layer deposition (ALD), which is a gas phase thin film deposition method based on alternate saturative surface reactions. Surface controlled self-limiting film growth results in conformal and uniform films. Other strengths of ALD are precise film thickness control, repeatability and dense and pinhole free films. All these make the ALD technique an ideal choice also for depositing metal fluoride thin films. Metal fluoride ALD processes have been largely missing, which is mostly due to a lack of a good fluorine precursor. In this thesis, TiF4 precursor was used for the first time as the fluorine source in ALD for depositing CaF2, MgF2, LaF3 and YF3 thin films. TaF5 was studied as an alternative novel fluorine precursor only for MgF2 thin films. Metal-thd (thd = 2,2,6,6-tetramethyl-3,5-heptanedionato) compounds were applied as the metal precursors. The films were grown at 175 450 °C and they were characterized by various methods. The metal fluoride films grown at higher temperatures had generally lower impurity contents with higher UV light transmittances, but increased roughness caused more scattering losses. The highest transmittances and low refractive indices below 1.4 (at 580 nm) were obtained with MgF2 samples. MgF2 grown from TaF5 precursor showed even better UV light transmittance than MgF2 grown from TiF4. Thus, TaF5 can be considered as a high quality fluorine precursor for depositing metal fluoride thin films. Finally, MgF2 films were applied in fabrication of high reflecting mirrors together with Ta2O5 films for visible region and with LaF3 films for UV region. Another part of the thesis consists of applying already existing ALD processes for novel optical devices. In addition to the high reflecting mirrors, a thin ALD Al2O3 film on top of a silver coating was proven to protect the silver mirror coating from tarnishing. Iridium grid filter prototype for rejecting IR light and Ir-coated micro channel plates for focusing x-rays were successfully fabricated. Finally, Ir-coated Fresnel zone plates were shown to provide the best spatial resolution up to date in scanning x-ray microscopy.

Polymer Protected Gold Nanoparticles

Polymer protected gold nanoparticles have successfully been synthesized by both "grafting-from" and "grafting-to" techniques. The synthesis methods of the gold particles were systematically studied. Two chemically different homopolymers were used to protect gold particles: thermo-responsive poly(N-isopropylacrylamide), PNIPAM, and polystyrene, PS. Both polymers were synthesized by using a controlled/living radical polymerization process, reversible addition-fragmentation chain transfer (RAFT) polymerization, to obtain monodisperse polymers of various molar masses and carrying dithiobenzoate end groups. Hence, particles protected either with PNIPAM, PNIPAM-AuNPs, or with a mixture of two polymers, PNIPAM/PS-AuNPs (i.e., amphiphilic gold nanoparticles), were prepared. The particles contain monodisperse polymer shells, though the cores are somewhat polydisperse. Aqueous PNIPAM-AuNPs prepared using a "grafting-from" technique, show thermo-responsive properties derived from the tethered PNIPAM chains. For PNIPAM-AuNPs prepared using a "grafting-to" technique, two-phase transitions of PNIPAM were observed in the microcalorimetric studies of the aqueous solutions. The first transition with a sharp and narrow endothermic peak occurs at lower temperature, and the second one with a broader peak at higher temperature. In the first transition PNIPAM segments show much higher cooperativity than in the second one. The observations are tentatively rationalized by assuming that the PNIPAM brush can be subdivided into two zones, an inner and an outer one. In the inner zone, the PNIPAM segments are close to the gold surface, densely packed, less hydrated, and undergo the first transition. In the outer zone, on the other hand, the PNIPAM segments are looser and more hydrated, adopt a restricted random coil conformation, and show a phase transition, which is dependent on both particle concentration and the chemical nature of the end groups of the PNIPAM chains. Monolayers of the amphiphilic gold nanoparticles at the air-water interface show several characteristic regions upon compression in a Langmuir trough at room temperature. These can be attributed to the polymer conformational transitions from a pancake to a brush. Also, the compression isotherms show temperature dependence due to the thermo-responsive properties of the tethered PNIPAM chains. The films were successfully deposited on substrates by Langmuir-Blodgett technique. The sessile drop contact angle measurements conducted on both sides of the monolayer deposited at room temperature reveal two slightly different contact angles, that may indicate phase separation between the tethered PNIPAM and PS chains on the gold core. The optical properties of amphiphilic gold nanoparticles were studied both in situ at the air-water interface and on the deposited films. The in situ SPR band of the monolayer shows a blue shift with compression, while a red shift with the deposition cycle occurs in the deposited films. The blue shift is compression-induced and closely related to the conformational change of the tethered PNIPAM chains, which may cause a decrease in the polarity of the local environment of the gold cores. The red shift in the deposited films is due to a weak interparticle coupling between adjacent particles. Temperature effects on the SPR band in both cases were also investigated. In the in situ case, at a constant surface pressure, an increase in temperature leads to a red shift in the SPR, likely due to the shrinking of the tethered PNIPAM chains, as well as to a slight decrease of the distance between the adjacent particles resulting in an increase in the interparticle coupling. However, in the case of the deposited films, the SPR band red-shifts with the deposition cycles more at a high temperature than at a low temperature. This is because the compressibility of the polymer coated gold nanoparticles at a high temperature leads to a smaller interparticle distance, resulting in an increase of the interparticle coupling in the deposited multilayers.

Alueellinen imago ja identiteetti liikkeessä

Regions are considered to be in competition for investments, industries, inhabitants and skilled labour nationally as well as internationally. In the context of tightening competition, more and more attention has been paid to regional attractors. A positive image is an important attractor in regional competition. In Finland, many towns and regions have either implemented or are planning to implement various image-enhancing campaigns or other measures aimed at improving their image. The role of identity is very important in developing a regional image. Good regional image should be based on a strong regional identity and awareness. Related to this is the perception of one's own region as separate from others and the familiarity of the region. If a region has no place in the awareness of its residents or if the inhabitants do not identify with it, its very existence as a social construct can be questioned. This means that building the regional image, which in this context is seen as social constructivism, is extremely difficult if the degree of regional awareness and identification is low. On the other hand, regional identity is being built also by developing the regional image. In a way, regional discourses have become more marketing-oriented in that instead of trying to create a regional esprit de corps there is now more image-oriented speech aimed at striving to improve the attractivity to outsiders of the region. Even though the goal is to bring the region to the attention of non-residents, a measure of construction of regional identity for the local population is automatically effected at the same time. Regional image and identity are consequences of linguistic producing and understanding of a region. It means that both image and identity are seen as language-created social constructions. The regional image is created through various discourses, but also the construction of a regional identity as regional consciousness and identification is largely a linguistic process. Essential in this context is perceiving the region as a discursive project characterized by its representation as texts, images and symbols. The linguistic production of a region is not a neutral description of "reality", but a representation based on interpretations, experiences and different motivations. Production and perceiving vary in time, so regional image and identity are on the move. This research is driven by the ongoing change of the regional system. The municipal and service structure reform is in progress and the number of municipalities seems to be on the decrease. At the same time, European Union s regional policy and regionalism on the whole are changing the status of sub-regions. At municipal level the crucial question is how the municipal structure reform will affect regional identity. This study points out that strong sense of municipal identity is a source of opposition to changes in municipal structure, but on the other hand the deinstitutionalization of the old municipality in municipal merger does not in itself mean the weakening of municipal identity.