A Practical Micro Mechanical Model Based Local Approach Methodology for the Analysis of Ductile Fracture of Welded T-Joints

This thesis concentrates on developing a practical local approach methodology based on micro mechanical models for the analysis of ductile fracture of welded joints. Two major problems involved in the local approach, namely the dilational constitutive relation reflecting the softening behaviour of material, and the failure criterion associated with the constitutive equation, have been studied in detail. Firstly, considerable efforts were made on the numerical integration and computer implementation for the non trivial dilational Gurson Tvergaard model. Considering the weaknesses of the widely used Euler forward integration algorithms, a family of generalized mid point algorithms is proposed for the Gurson Tvergaard model. Correspondingly, based on the decomposition of stresses into hydrostatic and deviatoric parts, an explicit seven parameter expression for the consistent tangent moduli of the algorithms is presented. This explicit formula avoids any matrix inversion during numerical iteration and thus greatly facilitates the computer implementation of the algorithms and increase the efficiency of the code. The accuracy of the proposed algorithms and other conventional algorithms has been assessed in a systematic manner in order to highlight the best algorithm for this study. The accurate and efficient performance of present finite element implementation of the proposed algorithms has been demonstrated by various numerical examples. It has been found that the true mid point algorithm (a = 0.5) is the most accurate one when the deviatoric strain increment is radial to the yield surface and it is very important to use the consistent tangent moduli in the Newton iteration procedure. Secondly, an assessment of the consistency of current local failure criteria for ductile fracture, the critical void growth criterion, the constant critical void volume fraction criterion and Thomason's plastic limit load failure criterion, has been made. Significant differences in the predictions of ductility by the three criteria were found. By assuming the void grows spherically and using the void volume fraction from the Gurson Tvergaard model to calculate the current void matrix geometry, Thomason's failure criterion has been modified and a new failure criterion for the Gurson Tvergaard model is presented. Comparison with Koplik and Needleman's finite element results shows that the new failure criterion is fairly accurate indeed. A novel feature of the new failure criterion is that a mechanism for void coalescence is incorporated into the constitutive model. Hence the material failure is a natural result of the development of macroscopic plastic flow and the microscopic internal necking mechanism. By the new failure criterion, the critical void volume fraction is not a material constant and the initial void volume fraction and/or void nucleation parameters essentially control the material failure. This feature is very desirable and makes the numerical calibration of void nucleation parameters(s) possible and physically sound. Thirdly, a local approach methodology based on the above two major contributions has been built up in ABAQUS via the user material subroutine UMAT and applied to welded T joints. By using the void nucleation parameters calibrated from simple smooth and notched specimens, it was found that the fracture behaviour of the welded T joints can be well predicted using present methodology. This application has shown how the damage parameters of both base material and heat affected zone (HAZ) material can be obtained in a step by step manner and how useful and capable the local approach methodology is in the analysis of fracture behaviour and crack development as well as structural integrity assessment of practical problems where non homogeneous materials are involved. Finally, a procedure for the possible engineering application of the present methodology is suggested and discussed.

Creando valor a través de las TIC: nuevos intermediarios

Este trabajo analiza cómo se puede crear valor a través del uso de las TIC. Para ello se utiliza el Modelo de creación de valor en e-business desarrollado por Amit y Zott (2001) y se aplica a una tipología de nuevos intermediarios que opera en el sector de los contenidos digitales: gregadores de noticias. Para lograr este objetivo, se ha realizado un estudio exploratorio y un estudio de casos a través de entrevistas personales con informadores estratégicos y un análisis del contenido de las páginas web de 56 empresas relacionadas con el sector y cuestionarios, principalmenteSe han analizado empresas de EEUU, Canadá, España, Francia, Alemania, Reino Unido y Suiza

Web-based corporate social responsibility reporting

Due to concerns regarding globalisation and sustainable development, corporate social responsibility (CSR) is topical in the business context and in the field of accounting. The main objective of this study was to review previous academic literature in the field of CSR reporting and develop an insight into CSR reporting in the Web-based environment. The main purpose was to find out what Web-based CSR reporting is like and how companies are utilising the Internet to communicate on responsibility issues. I did not, however, collect empirical research data but limited my study into theoretical and descriptive examination. In order to create an insight into Web-based reporting, I examined the development, motives and current practices of CSR reporting. I concluded that the Internet is a unique, interactive communication channel that is used differently compared with annual reports. The amount of companies engaging in Web-based CSR reporting is increasing and the reporting practices in terms of e.g. content and accessibility of information vary. I also concluded that many companies have not yet discovered the true potential of the Web as an interactive communication medium.

Näkökohtia aloittavan yritysverkoston markkinointiin ja teknologiastrategiaan

Carelian EcoTec yritysverkosto on uusi käynnistymisvaiheessa oleva verkosto. Verkosto toimii pääosin Keski Karjalassa ja siinä on mukana 15 yritystä. Diplomityössä syvennytään kolmeen aihealueeseen: verkostoituminen, markkinatutkimus ja teknologiastrategia, yritysverkoston kannalta. Verkostoitumisen osalta arvioitiin verkoston nykytilaa, verkoston yritysten näkemystä verkostosta ja lisäksi tehtiin verkostolle SWOT analyysi. Verkostoitumisen osalta arvioitiin myös verkoston kehittämiskohteita tulevaisuudessa. Markkinaselvityksessä verkoston toimialat on segmentoitu ja näiden valittujen segmenttien markkinat on pyritty arvioimaan puhelinhaastatteluiden, koemarkkinoinnin, aiempien selvitysten ja tilastojen perusteella. Markkinaselvityksen perusteella muotoiltiin markkinointistrategia verkostolle. Teknologiastrategiassa pyrittiin rakentamaan verkostolle teknologiastrategia. Teknologiastrategian luomiseen käytettiin apuna kirjallisuudessa esitettyjä teknologiastrategian laadintamalleja. Teknologiastrategiassa määriteltiin kohteita, joihin verkoston tulisi teknologisesti keskittyä lähitulevaisuudessa.

Marketing of Lappeenranta University of Technology energy auditing services

The objective of this study was to find out how LUT Energy should start marketing its energy audit services, what would be the optimal pricing policy for its services and how LUT Energy could manage customer expectations towards quality of its auditing services. In order to answer these questions, a quantitative survey questionnaire was sent by e-mail to 56 companies from the regions of South Karelia and Kymenlaakso. The empirical data of the study was the answers and opinions of the companies, previous researches about energy efficiency and articles and presentations about the current situation in the energy efficiency market. The results of the study were that there is a great potential for energy audit services and also the legislation requires companies to improve their energy efficiency. To start marketing its services, LUT Energy should first clarify its service concept and divide its service offering into two offers. It should also clarify the marketing message it wants to send its customers and then do the marketing with the help of three-way-model. The best pricing policy for the service would be that the price is proportioned to the future savings. In order to ensure the quality of its services, LUT Energy has to make sure that both dimensions of the quality are managed properly and to fade out customer expectations towards the quality the auditing work has to be monitored.

Development of beam and plate finite elements based on the absolute nodal coordinate formulation

The focus of this dissertation is to develop finite elements based on the absolute nodal coordinate formulation. The absolute nodal coordinate formulation is a nonlinear finite element formulation, which is introduced for special requirements in the field of flexible multibody dynamics. In this formulation, a special definition for the rotation of elements is employed to ensure the formulation will not suffer from singularities due to large rotations. The absolute nodal coordinate formulation can be used for analyzing the dynamics of beam, plate and shell type structures. The improvements of the formulation are mainly concentrated towards the description of transverse shear deformation. Additionally, the formulation is verified by using conventional iso-parametric solid finite element and geometrically exact beam theory. Previous claims about especially high eigenfrequencies are studied by introducing beam elements based on the absolute nodal coordinate formulation in the framework of the large rotation vector approach. Additionally, the same high eigenfrequency problem is studied by using constraints for transverse deformation. It was determined that the improvements for shear deformation in the transverse direction lead to clear improvements in computational efficiency. This was especially true when comparative stress must be defined, for example when using elasto-plastic material. Furthermore, the developed plate element can be used to avoid certain numerical problems, such as shear and curvature lockings. In addition, it was shown that when compared to conventional solid elements, or elements based on nonlinear beam theory, elements based on the absolute nodal coordinate formulation do not lead to an especially stiff system for the equations of motion.

Web 2.0 technology assisted global knowledge network as an organizations key asset

Aim of the Thesis is to study and understand the theoretical concept of Metanational corporation and understand how the Web 2.0 technologies can be used to support the theory. Empiric part of the study compares the theory to the case company’s current situation Goal of theoretical framework is to show how the Web 2.0 technologies can be used in the three levels of the Metanational corporation. In order to do this, knowledge management and more accurately knowledge transferring is studied to understand what is needed from the Web 2.0 technologies in the different functions and operations of the Metanational corporation. Final synthesis of the theoretical framework is to present a model where the Web 2.0 technologies are placed on the levels of the Metanational corporation. Empirical part of the study is based on interviews made in the case company. Aim of the interviews is to understand the current state of the company related to the theoretical framework. Based on the interviews, the differences between the theoretical concept and the case company are presented and studied. Finally the study presents the found problem areas, and where the adoption of the Web 2.0 tools is seen as beneficiary, based on the interviews and theoretical framework.

ContinuousMultimodal Global Optimization with Differential Evolution-Based Methods

Metaheuristic methods have become increasingly popular approaches in solving global optimization problems. From a practical viewpoint, it is often desirable to perform multimodal optimization which, enables the search of more than one optimal solution to the task at hand. Population-based metaheuristic methods offer a natural basis for multimodal optimization. The topic has received increasing interest especially in the evolutionary computation community. Several niching approaches have been suggested to allow multimodal optimization using evolutionary algorithms. Most global optimization approaches, including metaheuristics, contain global and local search phases. The requirement to locate several optima sets additional requirements for the design of algorithms to be effective in both respects in the context of multimodal optimization. In this thesis, several different multimodal optimization algorithms are studied in regard to how their implementation in the global and local search phases affect their performance in different problems. The study concentrates especially on variations of the Differential Evolution algorithm and their capabilities in multimodal optimization. To separate the global and local search search phases, three multimodal optimization algorithms are proposed, two of which hybridize the Differential Evolution with a local search method. As the theoretical background behind the operation of metaheuristics is not generally thoroughly understood, the research relies heavily on experimental studies in finding out the properties of different approaches. To achieve reliable experimental information, the experimental environment must be carefully chosen to contain appropriate and adequately varying problems. The available selection of multimodal test problems is, however, rather limited, and no general framework exists. As a part of this thesis, such a framework for generating tunable test functions for evaluating different methods of multimodal optimization experimentally is provided and used for testing the algorithms. The results demonstrate that an efficient local phase is essential for creating efficient multimodal optimization algorithms. Adding a suitable global phase has the potential to boost the performance significantly, but the weak local phase may invalidate the advantages gained from the global phase.

Engendering Group Support Based Foresight for Capital Intensive Manufacturing Industries - Case Paper and Steel Industry Scenarios by 2018

In recent times of global turmoil, the need for uncertainty management has become ever momentous. The need for enhanced foresight especially concerns capital-intensive industries, which need to commit their resources and assets with long-term planning horizons. Scenario planning has been acknowledged to have many virtues - and limitations - concerning the mapping of the future and illustrating the alternative development paths. The present study has been initiated to address both the need of improved foresight in two capital-intensive industries, i.e. the paper and steel industries and the imperfections in the current scenario practice. The research problem has been approached by engendering a problem-solving vehicle, which combines, e.g. elements of generic scenario process, face-to-face group support methods, deductive scenario reasoning and causal mapping into a fully integrated scenario process. The process, called the SAGES scenario framework, has been empirically tested by creating alternative futures for two capital-intensive industries, i.e. the paper and steel industries. Three scenarios for each industry have been engendered together with the identification of the key megatrends, the most important foreign investment determinants, key future drivers and leading indicators for the materialisation of the scenarios. The empirical results revealed a two-fold outlook for the paper industry, while the steel industry future was seen as much more positive. The research found support for utilising group support systems in scenario and strategic planning context with some limitations. Key perceived benefits include high time-efficiency, productivity and lower resource-intensiveness. Group support also seems to enhance participant satisfaction, encourage innovative thinking and provide the users with personalised qualitative scenarios.

On Value Creation at an Industrial Intersection – Bioenergy in the Forest and Energy Sectors

The traditional forest industry is a good example of the changing nature of the competitive environment in many industries. Faced with drastic challenges forestindustry companies are forced to search for new value-creating strategies in order to create competitive advantage. The emerging bioenergy business is now offering promising avenues for value creation for both the forest and energy sectors because of their complementary resources and knowledge with respect to bioenergy production from forest-based biomass. The key objective of this dissertation is to examine the sources of sustainable competitive advantage and the value-creation opportunities that are emerging at the intersection between the forest and energy industries. The research topic is considered from different perspectives in order to provide a comprehensive view of the phenomenon. The study discusses the business opportunities that are related to producing bioenergy from forest-based biomass, and sheds light on the greatest challenges and threats influencing the success of collaboration between the forest and energy sectors. In addition, it identifies existing and potential bioenergy actors, and considers the resources and capabilities needed in order to prosper in the bioenergy field. The value-creation perspective is founded on strategic management accounting, the theoretical frameworks are adopted from the field of strategic management, and the future aspect is taken into account through the application of futures studies research methodology. This thesis consists of two parts. The first part provides a synthesis of the overall dissertation, and the second part comprises four complementary research papers. There search setting is explorative in nature, and both qualitative and quantitative research methods are used. As a result, the thesis lays the foundation for non-technological studies on bioenergy. It gives an example of how to study new value-creation opportunities at an industrial intersection, and discusses the main determinants affecting the value-creation process. In order to accomplish these objectives the phenomenon of value creation at the intersection between the forest and energy industries is theorized and connected with the dynamic resource-based view of the firm.

Digital social media: An interactive technology incorporated as a competitive advantage for business

In a more transparent and dynamic world, in which consumers trust other consumers more for advice and recommendations on products and services, the continuity of organizations appears to be associated with socialization, the sharing of interests and the interaction with the audience. This is associated with the incorporation of digital technologies to business, specifically the use of social media. Consequently, it is timely and interesting to explore the phenomenon of virtual socialization, although it is a littlestudied field and what is needed is an innovative and theoretical approach based upon theories of marketing and communication. Expertise in these areas is present in all organizations and their performance is important for appropriate development of them. This work is a qualitative analysis about the behavior, reactions and attitudes of individuals to organizations, in order to understand the social factors that contribute to sustainable competitive advantages of organizations which can support strategic and future actions. We conclude that relevant factors associated with the tacit knowledge of the organization, specifically to learning and social interaction of the organization and their knowledge of virtual communities. The higher the coexistence of factors, the more difficult is the replication and greater will be the hypothesis of sustainable competitive advantage.

Improving demand forecasting practices in the industrial context

Demand forecasting is one of the fundamental managerial tasks. Most companies do not know their future demands, so they have to make plans based on demand forecasts. The literature offers many methods and approaches for producing forecasts. When selecting the forecasting approach, companies need to estimate the benefits provided by particular methods, as well as the resources that applying the methods call for. Former literature points out that even though many forecasting methods are available, selecting a suitable approach and implementing and managing it is a complex cross-functional matter. However, research that focuses on the managerial side of forecasting is relatively rare. This thesis explores the managerial problems that are involved when demand forecasting methods are applied in a context where a company produces products for other manufacturing companies. Industrial companies have some characteristics that differ from consumer companies, e.g. typically a lower number of customers and closer relationships with customers than in consumer companies. The research questions of this thesis are: 1. What kind of challenges are there in organizing an adequate forecasting process in the industrial context? 2. What kind of tools of analysis can be utilized to support the improvement of the forecasting process? The main methodological approach in this study is design science, where the main objective is to develop tentative solutions to real-life problems. The research data has been collected from two organizations. Managerial problems in organizing demand forecasting can be found in four interlinked areas: 1. defining the operational environment for forecasting, 2. defining the forecasting methods, 3. defining the organizational responsibilities, and 4. defining the forecasting performance measurement process. In all these areas, examples of managerial problems are described, and approaches for mitigating these problems are outlined.

Tuotannonsuunnittelu- ja -ohjausprosessin kehittäminen konepajayrityksessä

Tehdyssä kirjallisuus- ja teoriakatsauksessa vuosien 2006 - 2010 välisenä aikana, Keski-Suomessa toimivan konepajateollisuuden järjestelmätoimittajayrityksen toimeksiannosta, pyrittiin muodostamaan kokonaiskuva laajasta tuotannonsuunnittelun ja -ohjauksen aihealueesta. Perustutkimuskysymykset liittyivät ns. MPC-systeemiin, jolla tarkoitetaan sitä, että tuotannonsuunnittelu- ja ohjauskysymyksissä on huomioitava aina henkilöiden, organisaation, teknologioiden ja prosessien muodostama kokonaisuus. Operatiivisen johtamisen tehtävänä on yrityksen tuotteita koskevan kysynnän ja tarjonnan tasapainottaminen niin, että resursseja käytettäisiin ja tarvittaisiin mahdollisimman vähän vastattaessa kysyntään asiakasvaatimukset huomioiden. Tuotantostrategian pohjalta on voitava rakentaa MPC-systeemi, jonka avulla ja jota kehittäen tuotanto saavuttaisi sille asetetut suorituskykytavoitteet mm. kustannusten, laadun, nopeuden, luotettavuuden sekä tuottavuuskehityksen osalta. Työssä tarkasteltiin yleisen kolmitasoisen viitekehyksen kautta ”perinteisistä MPC-systeemien perusratkaisuista” hierarkkisia, suunnittelu- ja laskentaintensiiviä, MRP-pohjaisia sekä yksinkertaistamiseen ja nopeuteen perustuvia JIT/Lean -menetelmiä. Tämä viitekehys käsittää: 1) kysynnän- ja resurssien hallinnan, 2) yksityiskohtaisemman kapasiteetin ja materiaalien hallinnan sekä 3) tarkemman tuotannon ja hankintojen ohjauksen sekä tuotannon lattiatason osa-alueet. Johtamisen ja MPC-systeemien kehittämisen ”uusina aaltoina ja näkökulmina” raportissa käsiteltiin myös johtamisen eri koulukuntia sekä em. viitekehyksen pohjalta tarvittavia tietojärjestelmiä. Olennaisimpana johtopäätöksenä todettiin, että MRP-pohjaisten ratkaisujen lisäksi, etenkin monimutkaisia tuotteita tilausohjautuvasti valmistavien kappaletavarateollisuuden yritysten, on mahdollisesti hyödynnettävä myös kehittyneempiä suunnittelu- ja ohjausjärjestelmiä. Lisäksi huomattiin, että ”perinteisten strategioiden” rinnalle yritysten on nostettava myös tieto- ja viestintäteknologiastrategiat. On tärkeää ymmärtää, että täydellistä MPC-systeemiä ei ole vielä keksitty: jokaisen yrityksen tehtäväksi ja vastuulle jää ”oman totuutensa” muodostaminen ja systeeminsä rakentaminen sen pohjalta.

Tutkimus- ja kehitysvaiheen toteuttaminen teknologisessa innovaatioprosessissa

Through the ages technological changes have created new challenges and possibilities to develop products, services, processes or organizations. Management of the technology concerns all of those activities from technical invention to commercial application. Management of the technologic innovation process is the more challenging the more technology is involved in a process. Researches of the technological innovations are seldom concern the implementation of early phases and especially in product manufacturing company. Still there are research and development activities. Therefore the purpose of this research is to develop the pattern for implementation of research and development phases in technological innovation process. This study focuses the main elements of the technological innovation management and main obstacles and drivers. This study also focuses decision making and the other influencing elements of the decision making. The research design of this explorative research applies a qualitative research strategy where a case study method is utilized to collect and analyze the data. The study consisted of a single case to utilize of technological ideas and possibilities. The selected case company was the product manufacturing company which didn’t have own technological research and development organization. The case was a process which was analyzed from two different perspectives. The main unit of analysis was the whole process. The data collecting method of this study included semi-structured and open interviews, participant-observations and experimental tests. Analyzing the case data relies on the theoretical propositions of the framework based on the previous research. Based on this research the key elements of the research and development phases in technological innovation process were technical expertise and preliminary investigation. The obstacles and drivers in the R&D phases by the case were management of the whole process and resources and knowing objectives of process and learning during the process. In addition to the result of the research was the feature of decision making to optimize used time. The findings of this study gave further insight implementation of the technological innovation in the product manufacturing company. The research was based a single case which means the results cannot be generalized to different companies or industry fields. Therefore the results generalizing require further research with multiple researchers.

Platform as a Service - new opportunities for software development companies

Today cloud computing is the next stage in development information-oriented society in field of information technologies. Great attention is paid to cloud computing in general, but the lack of scientific consideration to components brings to the problem, that not all aspects are well examined. This thesis is an attempt to consider Platform as a Service (a technology of providing development environment through the Internet) from divergent angles. Technical characteristics, costs, time, estimation of effectiveness, risks, strategies that can be applied, migration process, advantages and disadvantages and the future of the approach are examined to get the overall picture of cloud platforms. During the work literature study was used to examine Platform as a Service, characteristics of existent cloud platforms were explored and a model of a typical software development company was developed to create a scenario of migration to cloud technologies. The research showed that besides all virtues in reducing costs and time, cloud platforms have some significant obstacles in adoption. Privacy, security and insufficient legislation impede the concept to be widespread.