Alargamento da distribuição de massa molar de polímeros sintetizados com catalisadores metalocênicos dual-site

The main topics related to the use of dual-site catalysts in the production of polymers with broad molecular weight distribution are reviewed. The polymerization using dual-site catalysts is more economical and allows to produce a higher quality product than other processes, such as polymer blend and multistage reactors. However, the formulation of these catalysts is quite complicated since the same catalyst must produce distinct polymer grades. In addition, the release of patents concerning the combination of metallocenes and new technologies for polymerization shows that polymerization processes using dual-site catalysts are of current industrial interest.

Aerosol particle size distributions at a traffic exposed site and an urban background location in Oporto, Portugal

Aerosol size distributions from 6 to 700 nm were measured simultaneously at an urban background site and a roadside station in Oporto. The particle number concentration was higher at the traffic exposed site, where up to 90% of the size spectrum was dominated by the nucleation mode. Larger aerosol mode diameters were observed in the urban background site possibly due to the coagulation processes or uptake of gases during transport. Factor analysis has shown that road traffic and the neighbour stationary sources localised upwind affect the urban area thought intra-regional pollutant transport.

Defining the location factors of new manufacturing site in chemical industry

The objective of this thesis is to examine the factors that have an impact on the location decision of new manufacturing site and to create the relative order of importance of these factors by analytic hierarchy process (AHP). The decision making process especially related to the location selection and the measurement of the location factors are also examined. In theoretical part the character of decision making process and the relevant methods are introduced. Based on the previous studies of other researchers, the location factors are examined and the main research method, analytic hierarchy process, is also introduced. The empirical part of the study mainly follows the phases of decision making process and is emphasized on the main stages of analytic hierarchy process; building the hierarchy, defining the priorities and analyzing the results. The hierarchy is constructed from seven main criteria which all have several sub criteria. The evaluation of the hierarchy is implemented at the group decision making –laboratory and there can be seen significant differences between the importance of criteria. The final stage in the study is to create the appropriate measurement scales to the chosen criteria.

Planning and ramping up a new SW Testing site

During recent years, mobile phone markets have changed significantly. Asian markets have become vital for the manufacturers with their millions of end users and multiple major mobile network operators. This has resulted in software development as global companies have research and development sites running in multiple locations, including Asia. The reasons behind this are not only in reducing labor costs but also in capitalizing on the local knowledge and knowhow. A ramp-up site has multiple effects in the software development and software release activities. This thesis focuses on representing the importance of software testing as part of software development process and highlighting issues that need to be considered during ramp-up activities. In addition this work tries to emphasize the importance of communication between parties and information gathering prior to setting up the ramp-up site. The output of this thesis was successful software testing site ramp-up within the set time limits. The quality of software testing work was assured and the ramp-up -project requirements were achieved.

The Contribution of Mobile Device Manufacturers’ Site Usage to Brand Satisfaction and Loyalty

Recently most of the mobile phone manufacturer companies started to pay extra attention to their websites. This research investigates the sources of value creation on the mobile phone manufacturers’ website and the affect visiting the manufacturers’ website has on brand loyalty and brand satisfaction. The results show a correlation between positive website usage experience, brand loyalty and brand satisfaction. Moreover there is a relation between Novelty, Efficiency, Lock-in and the perceived usefulness the manufacturers’ website has on the mobile phone device. And finally the main reason behind Finnish student’s mobile phone brand loyalty is its country of origin.

Operation and Maintenance Security Service for OSS-RC networks

Security issues in telecommunication networks have become more important due to the development of the industry. The number of network elements and services has increased in the radio network as in the core network side, which has increased the number of security related issues. Ericsson has developed an OSS-RC product for operation and maintenance porpoises into the telecommunication networks. OSS-RC is used in a number of telecommunications operators, which have Ericsson's products used in their telecommunication networks. Ericsson provides product installation and maintenance support and guidance, but despite this, the product may have security related issues, either due to lack of following the instructions, human error or defect in the product itself or in a third party products attached. Ericsson’s Operation and Maintenance Security Service for OSS-RC networks aims to provide tools for checking the security level of the O&M product so that it meets all requirements and Ericsson’s own security related rules. Each customer has a unique telecommunications network structure and services, and so the security service has to be to create individually depending on the customer. The purpose of this thesis is to define the basic instructions for creating the security service for different customers.

Mining in Developing Countries: A Case Study of Sustainability Challenges

Mining has severe impacts on its surrounding. Particularly in the developing countries it has degraded the environment and signigicantly altered the socio-economical dynamics of the hosts. Especially relocation disrupts people from their homes, livelihoods, cultures and social activities. Mining industry has failed to develop the local host and streghten its governance structures; instead it has further degraded the development of mineral rich third world countries, which are among the world poorest ones. Cash flows derived from mining companies have not benefitted the crass-root level that however, bears most of the detrimental impacts. Especially if the governance structure of the host is weak, the sudden wealth is likely to accelerate disparities, corruption and even fuel wars. Environmental degradation, miscommunication, mistrust and disputes over land use have created conflicts between the communities and a mining company in Obuasi, Ghana; a case study of this thesis. The disputes are deeply rooted and further fuelled by unrealistic expectations and broken promises. The relations with artisanal and illegal miners have been especially troublesome. Illegal activities, mainly encroachment of the land and assets of the mine, such as vandalising tailings pipes have resulted in profits losses, environmental degradation and security hazards. All challenges mentioned above have to be addressed locally with site-specific solutions. It is vital to increase two-way communication, initiate collaboration and build capacity of the stakeholders such as local communities, NGOs and governance authorities. The locals must be engaged to create livelihood opportunities that are designed with and for them. Capacity can also be strengthened through education and skills training, such as women’s literacy programs. In order to diminish the overdependence of locals to the mine, the activities have to be self -sufficient and able to survive without external financial and managerial inputs. Additionally adequate and fair compensation practises and dispute resolution methods that are understood and accepted by all parties have to be agreed on as early as possible.

Membrane emulsification in preparation of single site catalyst

In the theory part the membrane emulsification was studied. Emulsions are used in many industrial areas. Traditionally emulsions are prepared by using high shear in rotor-stator systems or in high pressure homogenizer systems. In membrane emulsification two immiscible liquids are mixed by pressuring one liquid through the membrane into the other liquid. With this technique energy could be saved, more homogeneous droplets could be formed and the amount of surfactant could be decreased. Ziegler-Natta and single-site catalysts are used in olefin polymerization processes. Nowadays, these catalysts are prepared according to traditional mixing emulsification. More homogeneous catalyst particles that have narrower particle size distribution might be prepared with membrane emulsification. The aim of the experimental part was to examine the possibility to prepare single site polypropylene catalyst using membrane emulsification technique. Different membrane materials and solidification techniques of the emulsion were examined. Also the toluene-PFC phase diagram was successfully measured during this thesis work. This phase diagram was used for process optimization. The polytetrafluoroethylene membranes had the largest contact angles with toluene and also the biggest difference between the contact angles measured with PFC and toluene. Despite of the contact angle measurement results no significant difference was noticed between particles prepared using PTFE membrane or metal sinter. The particle size distributions of catalyst prepared in these tests were quite wide. This would probably be fixed by using a membrane with a more homogeneous pore size distribution. It is also possible that the solidification rate has an effect on the particle sizes and particle morphology. When polymeric membranes are compared PTFE is probably still the best material for the process as it had the best chemical durability.

Control of Asian soybean rust with mancozeb, a multi-site fungicide

An experiment conducted in the field the action of mancozeb, a fungicide of multi-site action was tested, to control soybean rust caused by Phakopsora pachyrhizi. Its performance was compared to that of the mixture cyproconazole (DMI) + azoxystrobin (QoI). The soybean cultivar NA 7337 RR was used with a population of 400,000 plants/ha cultivated in 20m2 plots. Treatments consisted of mancozeb levels (1.5 and 2.0 kg/ha) applied four, six and eight times. The DMI + QoI mixture was applied three times at 0.3 L/ha + Nimbus. Rust severity was assessed six times in the plots and data were integrated as the area under the disease progress curve (AUDPC). The plots were harvested and grain yield was expressed as kg/ha. Data on AUDPC and yield were subjected to analysis of variance and means compared according to Turkey's test (p = 0.005). Treatments with mancozeb were superior to DMI + QoI mixture both for rust control and grain yield. Four applications of 2.0 k/ha mancozeb were more efficient than three applications of the mixture used as standard. Mancozeb has the potential to be added to fungicide mixtures in the establishment of soybean rust anti-resistance strategy.

Disseminação seletiva da informação na área da saúde: o caso do web site Amedeo

As atividades de produção/divulgação de informações foram otimizadas pela facilidade de comunicação oferecida pela internet, e a produção científica cresce cada vez mais. Com foco nas facilidades de acesso à informação científica oferecidas pela tecnologia, o objetivo é evidenciar os benefícios da aplicação da Disseminação Seletiva da Informação (SDI) na formação de profissionais da saúde, a partir da análise do web site Amedeo. Faz-se um estudo comparativo, de modo a verificar como os artigos disseminados pelo Amedeo podem ser acessados no próprio e numa biblioteca universitária - no caso, analisou-se o acesso através do site do Sistema de Bibliotecas da Unicamp e, ainda, recorre-se à literatura para identificar relações entre a Ciência da Informação e a área de Ciências da Saúde, principalmente quanto à prática da Medicina Baseada em Evidências. Apresentam-se sugestões aos profissionais da informação e professores interessados em identificar possibilidades de uso dos recursos do Amedeo e demais serviços de SDI, em bibliotecas universitárias, de modo a colaborar com o processo educacional dos profissionais da área da saúde.

Dry biomass distribution in a cerrado sensu stricto site in Brazil central

The Cerrado has been the main source of firewood and charcoal in Brazil, but despite being one of the hot spots for conservation of the world's biodiversity, neither plantations of native species nor sustainable management has been adopted in the region. The aim of this work was to investigate the biomass distribution and the potential for energy production of the cerrado species. The study was conducted in a cerrado sensu stricto site at the Água Limpa Farm (15º 56'14'' S and 47º 46'08'' W) in the Cerrado Biosphere Reserve. An area of 63.54ha was divided in 20 x 50m plots and, a random sample consisting of ten of these plots, representing 1.56% of the study-site, was assessed. All woody individuals from 5 cm diameter at 30 cm above ground level were identified and measured. Each individual was felled, the twigs thinner than 3cm were discarded while the larger branches and the trunks, both with bark, were weighted separately. After that, 2.5cm transverse sections of the trunk with bark were taken at 0, 25, 50, 75 and 100% of the length. A similar sample was also taken at the base of each branch. A total of 47 species in 35 genera and 24 families were found, with an average density of 673 individuals per ha. The diameter distribution showed a reversed-J shape with 67% of the individuals up to 13cm, while the maximum diameter was 32.30cm. Seven species represented 72% of the total biomass. In general, the species with higher production per tree were among those with higher production per ha. This content was distributed by diameter classes, reaching a maximum of 2.5ton/ha between 9 to 13cm and then, decreasing to 0.96 ton/ha between 29 to 33cm diameter. Carbon sequestering was 6.2ton/ha (until the actual stage of cerrado) based on an average 50% carbon content in the dry matter. The heat combustion of the wood varied from 18,903kj/kg to 20,888kj/kg with an average of 19,942kj/kg. The smaller diameter classes fix more carbon due to the large number of small plants per ha. But, for a species that reached larger dimensions and contained individuals in all diameter classes, Vochysia thyrsoidea, one can verify an increase in carbon fixation from 1.41 kg/ha in the first class (5 to 9cm) to 138,3kg/ha in the last (25 to 33cm). That indicates that it is possible to select species that reach larger size with a higher capacity of carbon accumulation per plant. The species that reached larger dimensions, with a production per tree above average and had high calorific power values were Dalbergia miscolobium, Pterodon pubescens and Sclerolobium paniculatum. These species have potential for use in fuelwood plantations and sustainable management.

The Peace and Security Council of the African Union : its relationship with the United Nations, African Union and sub-regional mechanisms

Avhandlingen undersöker den Afrikanska Unionens freds- och säkerhetsråd och dess roll i framhävandet och upprätthållandet av fred, säkerhet och stabilitet i Afrika. Detta freds- och säkerhetsråd etablerades formellt 2004 och opererar under den Afrikanska Unionen (AU) som å sin sida upprättades 2002. Den Afrikanska Unionens freds- och säkerhetsråds roll i framhävandet av fred, säkerhet och stabilitet gör rådet till en hörnsten inom ramen för konfliktförebyggande och -hantering, samt konfliktlösning på den afrikanska kontinenten. Den Afrikanska Unionens freds- och säkerhetsråd spelar också en högst viktig roll i implementeringen av ansvaret att beskydda civilbefolkningen i konfliktsituationer. För uppfyllandet av sitt mandat att framhäva och upprätthålla fred, säkerhet och stabilitet i Afrika krävs det att freds- och säkerhetsrådet samarbetar med andra institutioner och mekanismer som handhar internationella och regionala freds- och säkerhetsärenden. Avhandlingen analyserar tre dimensioner av denna typ av relationer som freds- och säkerhetsrådet bör etablera med dessa organ och mekanismer för att kunna utföra sitt mandat effektivt. Först analyseras relationen mellan Afrikanska Unionens freds- och säkerhetsråd och Förenta Nationernas säkerhetsråd som också beskrivs i artikel 17 (1) i protokollet som förde till etablerandet av AU:s freds- och säkerhetsråd. Analysen understryker FN:s säkerhetsråd som det organ som bär det primära ansvaret i förhållande till fred och säkerhet, medan AU:s freds- och säkerhetsråd fungerar som en kompletterande komponent i sin roll som ett regionalt organ. Avhandlingen fortsätter med att analysera förhållandet mellan AU:s freds- och säkerhetsråd och andra organ inom AU, samt andra relevanta institutioner som framgår av artikel 10, 18 (1), 19 och 20 i protokollet för rådets etablerande. Avhandlingen diskuterar i detalj hur samarbetet mellan AU:s freds- och säkerhetsråd och dessa institutioner och organ kunde förstärkas till fördel för effektivt framhävande och upprätthållande av fred och säkerhet i Afrika. Slutligen analyserar avhandlingen samarbetet mellan AU:s freds- och säkerhetsråd och sub-regionala mekanismer etablerade under regionala ekonomiska gemenskaper som beskrivs i artikel 16 i protokollet för etablerandet av rådet. Avhandlingen diskuterar i detalj rollen för de sub-regionala mekanismerna i den afrikanska freds- och säkerhetsarkitekturen. Avhandlingen diskuterar vidare förhållandet mellan de sub-regionala mekanismerna och den afrikanska stand-by styrkan ASF och förutsättningarna för detta arrangemang att bemöta afrikanska konflikter. Avhandlingen fokuserar också på en harmoniserings- och samarbetsprocess i förhållande till de sub-regionala mekanismerna, de regionala ekonomiska gemenskaperna och den Afrikanska Unionens freds- och säkerhetsråd. Kort sagt beskriver avhandlingen hur förhållandet mellan AU:s freds- och säkerhetsråd och de ovan nämnda organ och mekanismer har en faktisk och potentiell möjlighet att effektivt bidra till fred, säkerhet och stabilitet i Afrika. Avhandlingen identifierar utmaningarna kring att göra detta till ett fungerande förhållande samtidigt som den genererar både generella och specifika rekommendationer om hur dessa utmaningar bäst kan bemötas. Några av dessa utmaningar utgörs av följande aspekter: konflikten mellan AU:s och FN:s reglemang i bemötandet av freds- och säkerhetsutmaningar; de olika metoderna i FN och AU vid implementeringen av principen av universell jurisdiktion; konflikten mellan de olika mandaten som AU:s freds- och säkerhetsråd och FN:s säkerhetsråd har i förhållande till implementeringen av principen om intervention; och konflikten mellan lagarna och metoderna i förhållande till AU:s freds- och säkerhetsråd och de regionala mekanismerna. En av de huvudsakliga rekommendationerna i avhandlingen i bemötandet av de ovan nämnda utmaningarna är att harmonisera de olika systemen för att försäkra att det föreligger ett samordnat bemötande av konflikter i Afrika. Efter att ha identifierat luckorna i AU:s freds- och säkerhetsprotokoll med speciell fokus på förhållandet mellan rådet och de relevanta organen och mekanismerna rekommenderar avhandlingen ett antal tillägg och modifieringar till instrumentet ifråga för att effektivera, stärka och upprätthålla detta förhållande. Avhandlingen föreslår att dessa tillägg och modifieringar skulle företas under 2014 då detta år markerar 10 år efter att AU:s freds- och säkerhetsråd etablerades. Idén bakom detta företagandet ligger i att 10 år torde vara en tillfredställande tidsperiod för att mäta hur freds- och säkerhetsrådet har fungerat och hur dess förhållande med de relevanta institutionerna och mekanismerna kunde förbättras. Avhandlingen representerar den bredaste och nyaste studien inom ramen för artikel 16, 17, 18, 19 och 20 i protokollet för AU:s freds- och säkerhetsråd och introducerar ett innovativt bemötande av utmaningar till fred, säkerhet och stabilitet på den afrikanska kontinenten. Avhandlingen bidrar till teorin och praxisen i AU:s freds- och säkerhetsråd vilket kan vara av intresse för både forskare och praktiker i folkrätt såväl som i internationella freds- och säkerhetsstudier, speciellt i Afrika.