992 resultados para Product failure


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The purpose of this master’s thesis was to study the opportunity to apply Lean practices to product management function which happens in an office environment. Since product management plays an important role in the company’s success story, it’s important to have it functioning as effectively as possible. The goal was to find those Lean tools and methods that fit the best to the needs of product management. The research was conducted as a qualitative action research which comprises a comprehensive literature review and a single case study. Theoretical information about Lean Thinking and product management was collected from articles, literature and Internet sources. Moreover, empirical data was collected by conducting interviews in the Case Company’s product management department in order to gain an in-depth understanding of product management’s problematics. The results indicate that most of the product management challenges could be overcome by applying Lean practises. Based on the usability rate, which has been discussed in the empirical part of this study, the most suitable Lean practises for product management function are: value stream mapping, Kanban and KPIs.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the new age of information technology, big data has grown to be the prominent phenomena. As information technology evolves, organizations have begun to adopt big data and apply it as a tool throughout their decision-making processes. Research on big data has grown in the past years however mainly from a technical stance and there is a void in business related cases. This thesis fills the gap in the research by addressing big data challenges and failure cases. The Technology-Organization-Environment framework was applied to carry out a literature review on trends in Business Intelligence and Knowledge management information system failures. A review of extant literature was carried out using a collection of leading information system journals. Academic papers and articles on big data, Business Intelligence, Decision Support Systems, and Knowledge Management systems were studied from both failure and success aspects in order to build a model for big data failure. I continue and delineate the contribution of the Information System failure literature as it is the principal dynamics behind technology-organization-environment framework. The gathered literature was then categorised and a failure model was developed from the identified critical failure points. The failure constructs were further categorized, defined, and tabulated into a contextual diagram. The developed model and table were designed to act as comprehensive starting point and as general guidance for academics, CIOs or other system stakeholders to facilitate decision-making in big data adoption process by measuring the effect of technological, organizational, and environmental variables with perceived benefits, dissatisfaction and discontinued use.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the new age of information technology, big data has grown to be the prominent phenomena. As information technology evolves, organizations have begun to adopt big data and apply it as a tool throughout their decision-making processes. Research on big data has grown in the past years however mainly from a technical stance and there is a void in business related cases. This thesis fills the gap in the research by addressing big data challenges and failure cases. The Technology-Organization-Environment framework was applied to carry out a literature review on trends in Business Intelligence and Knowledge management information system failures. A review of extant literature was carried out using a collection of leading information system journals. Academic papers and articles on big data, Business Intelligence, Decision Support Systems, and Knowledge Management systems were studied from both failure and success aspects in order to build a model for big data failure. I continue and delineate the contribution of the Information System failure literature as it is the principal dynamics behind technology-organization-environment framework. The gathered literature was then categorised and a failure model was developed from the identified critical failure points. The failure constructs were further categorized, defined, and tabulated into a contextual diagram. The developed model and table were designed to act as comprehensive starting point and as general guidance for academics, CIOs or other system stakeholders to facilitate decision-making in big data adoption process by measuring the effect of technological, organizational, and environmental variables with perceived benefits, dissatisfaction and discontinued use.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The thesis presents the study relative to the collaboration between suppliers and buyers in packaging industry with the impact of product features. The main purpose of this study is to examine the importance of product characteristics on collaboration to develop better packaging and to figure out how buyer-supplier collaboration in the supply chain perspectives is conducted and managed in packaging industry. The theoretical part reviewed some basic frameworks of collaboration including the scopes and levels of collaboration, risks as well as powers of collaboration, relationship and some key factors for successful collaboration. Followed by the overviews of packaging industry with the main issues related to product characteristics in packaging. By using the qualitative method, secondary data consisting of articles, reports, websites and primary data through interviewing some well-known packaging companies and case companies are collected in the thesis. The empirical result emphasized the importance of product features’ analysis in packaging industry since it plays a central role in the materials, design process, production and innovation with the role of collaboration. Collaboration in packaging is vital for packaging companies to survive and grow in the competitive environment. Finally, some key factors for effective collaboration were summarized based on the perspectives of packaging companies. It is highly recommend building a long-run collaboration with their customers due to undeniable benefits With increasingly importance of collaboration in packaging industry, further studies may be conducted.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Product Data Management (PDM) systems have been utilized within companies since the 1980s. Mainly the PDM systems have been used by large companies. This thesis presents the premise that small and medium-sized companies can also benefit from utilizing the Product Data Management systems. Furthermore, the starting point for the thesis is that the existing PDM systems are either too expensive or do not properly respond to the requirements SMEs have. The aim of this study is to investigate what kinds of requirements and special features SMEs, operating in Finnish manufacturing industry, have towards Product Data Management. Additionally, the target is to create a conceptual model that could fulfill the specified requirements. The research has been carried out as a qualitative case study, in which the research data was collected from ten Finnish companies operating in manufacturing industry. The research data is formed by interviewing key personnel from the case companies. After this, the data formed from the interviews has been processed to comprise a generic set of information system requirements and the information system concept supporting it. The commercialization of the concept is studied in the thesis from the perspective of system development. The aim was to create a conceptual model, which would be economically feasible for both, a company utilizing the system and for a company developing it. For this reason, the thesis has sought ways to scale the system development effort for multiple simultaneous cases. The main methods found were to utilize platform-based thinking and a way to generalize the system requirements, or in other words abstracting the requirements of an information system. The results of the research highlight the special features Finnish manufacturing SMEs have towards PDM. The most significant of the special features is the usage of project model to manage the order-to-delivery –process. This differs significantly from the traditional concepts of Product Data Management presented in the literature. Furthermore, as a research result, this thesis presents a conceptual model of a PDM system, which would be viable for the case companies interviewed during the research. As a by-product, this research presents a synthesized model, found from the literature, to abstract information system requirements. In addition to this, the strategic importance and categorization of information systems within companies has been discussed from the perspective of information system customizations.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The escalation in the number of mergers and acquisition transactions involving emerging market firms is a relatively recent phenomenon; as a consequence academic research in such topic is rather limited. The purpose of this research study was to discuss the possible reasons that led the acquisition failure of an emerging multinational firm and an Indonesian player. Extensive theoretical research was performed and it had been achieved, based on this, the finding of a framework that facilitated to understand the way in which the concepts of cultural distances and relate liabilities of foreignness in the process of acquisitions of foreign companies in emerging markets. The theoretical background collects literature related to acquisitions, models of cultural studies between nations and liabilities of foreignness. It has been generated a variety of frameworks that aid to understand the way that the institutional distance and cultural factors together with the concept of liabilities of foreignness can affect the process of market entry of an emerging multinational company to the extent that the best way to stop losing money is to abandon the project. The empirical research consisted of selective semi-structured interviews and an extensive research in available public data on the chosen study case of this research. There were several factors that were identified as the cause of the failure in the market entry of a Mexican multinational firm in Indonesia. The weakness shown by the local government authorities was used by the local community leaders who rioted because of discomfort. These groups were the ones who made the government submit to the extent that the agreements reached at the beginning of the deal were either canceled or modified in a way that favored always the local community. The contributions of this study fall into the knowledge field of emerging multinational firms and market entry process.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This thesis focuses on consolidation the recommendations on the integration of consumer in new product development (NPD) given in the academic literature, and on the example of the three NPD projects in the case company. The empirical findings advocate that the case company fulfills the principles of consumer-led NPD, and it is only one-step away of the full consumer empowerment strategy. Therefore, its NPD can be seen as an example of consumer-led NPD implementation. The findings also suggest that the product can be developed in consumer-led way regardless of the source of an idea (product- or need-driven), the target audience and resources assigned, in case when consumer mindset is integrated on all levels of organisation: strategic, cultural, operational and process. It is possible with top-management commitment, internal consumer research group, and the sophisticated consumer research methods. The specific managerial recommendations are given on developing consumer-led culture, strategy, NPD process and the appropriate consumer research methods and techniques.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The purpose of conducting this thesis is to gather around information about additive manufacturing and to design a product to be additively manufactured. The specific manufacturing method dealt with in this thesis, is powder bed fusion of metals. Therefore when mentioning additive manufacturing in this thesis, it is referred to powder bed fusion of metals. The literature review focuses on the principle of powder bed fusion, the general process chain in additive manufacturing, design rules for additive manufacturing. Examples of success stories in additive manufacturing and reasons for selecting parts to be manufactured with additive manufacturing are also explained in literature review. This knowledge is demanded to understand the experimental part of the thesis. The experimental part of the thesis is divided into two parts. Part A concentrates on finding proper geometry for building self-supporting pipes and proper parameters for support structures of them. Part B of the experimental part concentrates on a case study of designing a product for additive manufacturing. As a result of experimental part A, the design process of self-supporting pipes, results of visual analysis and results of 3D scanning are presented. As a result of experimental part B the design process of the product is presented and compared to the original model.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Celebrity endorsement has increased in popularity over the past decades and companies are willing to spend increasingly excessive amounts of money into it. Even though multiple studies support celebrity endorsement, further research on its impact on advertising effectiveness is called for. Fur-ther, the role of consumers’ product class involvement in advertising needs to be further studied. The purpose of this study is to explore if consumers’ product class involvement and exposure to celebrity endorsers affect consumers brand recall. Supported by earlier studies, brand recall was used as a measure for advertising effectiveness in this study. In general, a psychological approach was chosen for building the theoretical framework. Concept of classical conditioning was presented in order to understand why people act how they do. Balanced theory and meaning transfer model were presented in order to study how celebrities can be used effectively in advertising context. Further, the importance of product class involvement in advertising effectiveness was evaluated. Hypotheses were formulated based on a literature review of the existing research. Because of the versatility of the research design, a mixed methods approach for this study was adopted. Empirical part of the study was conducted in three stages. First, a pre-test was conducted in order to choose suitable product endorsers for the advertisement stimuli used in the experiment. Second, an eye-tracking experiment with 30 test subjects was conducted in order to study how people view advertisements and whether the familiarity of the product endorser and consumers’ product class involvement affects brand recall. For the experiment, a fictional brand was created in order to avoid bias on brand recall. Third, qualitative interviews for 15 test subjects were conducted in the post-experiment stage in order to gain deeper understating of the phenomenon and to make sense of the findings from the experiment. Findings from this study support celebrity endorsement by suggesting that a famous spokesperson does not steal attention from brand information more than a non-celebrity product endorser. As a result, the use of a celebrity endorser did not decrease brand recall. Results support earlier research as consumer’ higher product class involvement resulted in a better brand recall. Findings from the interviews suggest that consumers have positive perceptions of celebrity endorsement in general. However, the celebrity–brand congruence is a crucial factor when creating attitudes towards the advertisement. Future research ideas were presented based on the limitations and results of this study

Relevância:

20.00% 20.00%

Publicador:

Resumo:

There is an increasing amount of product-harm crisis in the past few years; and the impact of a product-harm crisis becomes more and more influential due to the high increasing speed of globalization. And it is believed that the negative damages to a firm leading to a loss of the intangible assets is bigger than other costs such as the cost of the product recall. Brand equity is a very important and valuable intangible asset for a firm; and it is particularly vulnerable during the crisis. And CSP (CSP) is a hot concept associated with product-harm crisis and brand equity. The aim of this study is to understand how product-harm crisis influences by simultaneously involving CSP as a moderator in a consumer-based level. An experimental study was conducted through an online questionnaire among 198 students in Finland. The questionnaire mainly assessed the consumers’ attitudes towards CSP and brand before/after a fictional product-harm crisis. The results shows that the brand equity was negatively related to the product-harm crisis. And the extent level of crisis’s severity was positively related to the loss of the brand equity; whereas, acknowledged blame was more useful to compensate the loss of brand equity in the low-severity crisis. CSP acted as a moderator role which could compensate the loss of brand equity caused by the product-harm crisis. Managerial implications are also offered for crisis managers, brand managers, and CSR managers.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study discusses the importance of learning through the process of exporting, and more specifically how such a process can enhance the product innovativeness of a company. The purpose of this study is to investigate the appropriate sources of learning and to suggest an interactive framework for how new knowledge from exporting markets can materialize itself into product innovation. The theoretical background of the study was constructed from academic literature, which is related to concepts of learning by exporting, along with sources for learning in the market and new product development. The empirical research in the form of a qualitative case study was based on four semi-structured interviews and secondary data from the case company official site. The interview data was collected between March and April 2015 from case company employees who directly work in the department of exporting and product development. The method of thematic analysis was used to categorize and interpret the collected data. What was conclusively discovered, was that the knowledge from an exporting market can be an incentive for product innovation, especially an incremental one. Foreign customers and competitors as important sources for new knowledge contribute to the innovative process. Foreign market competitors’ influence on product improvements was high only when the competitor was a market leader or held a colossal market share, while the customers’ influence is always high. Therefore, involving a foreign customer in the development of a new product is vital to a company that is interested in benefiting from what is learned through exporting. The interactive framework, which is based on the theoretical background and findings of the study, suggests that exporting companies can raise their product innovativeness by utilizing newly gained knowledge from exporting markets. Except for input, in the form of sources of learning, and product innovation as an output, the framework contains a process of knowledge transfer, the absorptive capacity of a firm and a new product development process. In addition, the framework and the findings enhance the understanding of the disputed relationship between an exporting experience and product innovation. However, future research is needed in order to fully understand all the elements of the framework, such as the absorptive capacity of a firm as well as more case companies to be processed in order to increase the generalization of the framework

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The purpose of this research is to examine the different opportunities that companies operating on international level has for conducting a product recall. The main subject of the research is strategic decision-making of recall and product recall process. The theoretical framework, core of the research, is based on research questions. The research is performed as qualitative case study and the material has been collected by combining results of previous studies and by observing the case company. Different opportunities for conducting a recall are examined in the empirical part of this study. As a result, different product recall models have been created, which all require deep cooperation between different entities of the supply chain.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Chinese welding industry is growing every year due to rapid development of the Chinese economy. Increasingly, companies around the world are looking to use Chinese enterprises as their cooperation partners. However, the Chinese welding industry also has its weaknesses, such as relatively low quality and weak management. A modern, advanced welding management system appropriate for local socio-economic conditions is required to enable Chinese enterprises to enhance further their business development. The thesis researches the design and implementation of a new welding quality management system for China. This new system is called ‗welding production quality control management model in China‘ (WQMC). Constructed on the basis of analysis of a survey and in-company interviews, the welding management system comprises the following different elements and perspectives: a ‗Localized congenital existing problem resolution strategies‘ (LCEPRS) database, a ‗human factor designed training system‘ (HFDT) training strategy, the theory of modular design, ISO 3834 requirements, total welding management (TWM), and lean manufacturing (LEAN) theory. The methods used in the research are literature review, questionnaires, interviews, and the author‘s model design experiences and observations, i.e. the approach is primarily qualitative and phenomenological. The thesis describes the design and implementation of a HFDT strategy in Chinese welding companies. Such training is an effective way to increase employees‘ awareness of quality and issues associated with quality assurance. The study identified widely existing problems in the Chinese welding industry and constructed a LCEPRS database that can be used in efforts to mitigate and avoid common problems. The work uses the theory of modular design, TWM and LEAN as tools for the implementation of the WQMC system.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The purpose of this master’s thesis is to gain an understanding of passive safety systems’ role in modern nuclear reactors projects and to research the failure modes of passive decay heat removal safety systems which use phenomenon of natural circulation. Another purpose is to identify the main physical principles and phenomena which are used to establish passive safety tools in nuclear power plants. The work describes passive decay heat removal systems used in AES-2006 project and focuses on the behavior of SPOT PG system. The descriptions of the main large-scale research facilities of the passive safety systems of the AES-2006 power plant are also included. The work contains the calculations of the SPOT PG system, which was modeled with thermal-hydraulic system code TRACE. The dimensions of the calculation model are set according to the dimensions of the real SPOT PG system. In these calculations three parameters are investigated as a function of decay heat power: the pressure of the system, the natural circulation mass flow rate around the closed loop, and the level of liquid in the downcomer. The purpose of the calculations is to test the ability of the SPOT PG system to remove the decay heat from the primary side of the nuclear reactor in case of failure of one, two, or three loops out of four. The calculations show that three loops of the SPOT PG system have adequate capacity to provide the necessary level of safety. In conclusion, the work supports the view that passive systems could be widely spread in modern nuclear projects.