Guia de análises microbiológicas para cortes de aves in natura: elaboração e aplicação prática

An effective hygiene and sanitation inspection of meat and meat products is essential for its production and commercialization. For this reason, the national and international standards responsible for these products quality control employs microbiological analyses methods as quality control tools. In December of 2012, it was included in the Ministério da Agricultura Pecuária e Abastecimento (MAPA) website, a Microbiological Scope of food and water, which presents the replacement of some methods proposed by the Normative Instruction 62. Some of these methodologies are considered rapid, practical and convenient. However, other methodologies were still replaced by conventional ones, which presents disadvantages as incorrect interpretations of the microorganism phenotypical and biochemical characteristics, leading to the misinterpretation of test results. Therefore, the objective of this study is to develop a comprehensive, practical and illustrative guidebook of microbiological analysis for in natura poultry cuts. The methods addressed in this guide are the official standards analysis required by the poultry cuts legislation, which are the Escherichia coli count, the thermotolerant coliforms count, the aerobic plate count and the detection of Salmonella spp. The approached methodologies for these analysis will be the AOAC 998.08, the Normative Instruction 62 and the ISO 4833-1:2013 and ISO 6579:2002, respectively. In these events, it is expected to obtain an enlightening and approved guidebook evaluated by laboratory technicians, which will help reduce the analytical subjectivity leading to a more reliable interpretation of the test results.

Comparison of indoor and outdoor fungi and particles in poultry units

A descriptive study was developed in order to compare indoor and outdoor air contamination caused by fungi and particles in seven poultry units. Twenty eight air samples of 25 litters were collected through the impaction method on malt extract agar. Air sampling and particles concentration measurement were done in the interior and also outside premises of the poultries’ pavilions. Regarding the fungal load in the air, indoor concentration of mold was higher than outside air in six poultry units. Twenty eight species / genera of fungi were identified indoor, being Scopulariopsis brevicaulis (40.5%) the most commonly isolated species and Rhizopus sp. (30.0%) the most commonly isolated genus. Concerning outdoor, eighteen species/genera of fungi were isolated, being Scopulariopsis brevicaulis (62.6%) also the most isolated. All the poultry farms analyzed presented indoor fungi different from the ones identified outdoors. Regarding particles’ contamination, PM2.5, PM5.0 and PM10 had a statistically significant difference (Mann-Whitney U test) between the inside and outside of the pavilions, with the inside more contaminated (p=.006; p=.005; p=.005, respectively). The analyzed poultry units are potential reservoirs of substantial amounts of fungi and particles and could therefore free them in the atmospheric air. The developed study showed that indoor air was more contaminated than outdoors, and this can result in emission of potentially pathogenic fungi and particles via aerosols from poultry units to the environment, which may post a considerable risk to public health and contribute to environmental pollution.

Machine for visual inspection

The project was made during the Erasmus+ Program in Instituto Superior de Engenharia do Porto, Portugal. I had a pleasure to do this in Gislotica Mechanical Solution, Lda. This document presents a process of design a vertical inspection station for truck tires. The first part contains an introduction. There are information about Gislotica Company and also first analysis of problem. In next part is presented way to figured out the task and described all issues connected with designed machine. In last part were made some conclusions about problems and results. There is a place not only for sum up design process but also my develop during the project. I repeatedly pointed out which issues were new for me. A lot of times I focus on myself and gained experience and information about design process.

Tire inspection spreading machine

The aim of the project was to design in Solidworks and improve an existing Tire inspection machine. The project was developed in Gislotica - Mechanical Solutions, guided by ing. Rui Manuel Fazenda Silva who is a professor in ISEP. The designed device relates to the inspection of automobile tires for holes and weak places caused by punctures and usage. Such inspection includes careful examination of the inside surface of the tire which is difficult because of its cylindrical shape, stiff and resistant nature of the material out of which the tire is made. The whole idea is to provide a machine by which the walls of the tire may be spread and hold apart, presenting the inner surface for the worker to control. The device must also perform rotational and vertical movement of the tire. It is meant to provide inspection in hich there is no need for the controller to use force. It makes his work easier and more efficient.

Scheduling of track inspection and maintenance activities in railroad networks

The U.S. railroad companies spend billions of dollars every year on railroad track maintenance in order to ensure safety and operational efficiency of their railroad networks. Besides maintenance costs, other costs such as train accident costs, train and shipment delay costs and rolling stock maintenance costs are also closely related to track maintenance activities. Optimizing the track maintenance process on the extensive railroad networks is a very complex problem with major cost implications. Currently, the decision making process for track maintenance planning is largely manual and primarily relies on the knowledge and judgment of experts. There is considerable potential to improve the process by using operations research techniques to develop solutions to the optimization problems on track maintenance. In this dissertation study, we propose a range of mathematical models and solution algorithms for three network-level scheduling problems on track maintenance: track inspection scheduling problem (TISP), production team scheduling problem (PTSP) and job-to-project clustering problem (JTPCP). TISP involves a set of inspection teams which travel over the railroad network to identify track defects. It is a large-scale routing and scheduling problem where thousands of tasks are to be scheduled subject to many difficult side constraints such as periodicity constraints and discrete working time constraints. A vehicle routing problem formulation was proposed for TISP, and a customized heuristic algorithm was developed to solve the model. The algorithm iteratively applies a constructive heuristic and a local search algorithm in an incremental scheduling horizon framework. The proposed model and algorithm have been adopted by a Class I railroad in its decision making process. Real-world case studies show the proposed approach outperforms the manual approach in short-term scheduling and can be used to conduct long-term what-if analyses to yield managerial insights. PTSP schedules capital track maintenance projects, which are the largest track maintenance activities and account for the majority of railroad capital spending. A time-space network model was proposed to formulate PTSP. More than ten types of side constraints were considered in the model, including very complex constraints such as mutual exclusion constraints and consecution constraints. A multiple neighborhood search algorithm, including a decomposition and restriction search and a block-interchange search, was developed to solve the model. Various performance enhancement techniques, such as data reduction, augmented cost function and subproblem prioritization, were developed to improve the algorithm. The proposed approach has been adopted by a Class I railroad for two years. Our numerical results show the model solutions are able to satisfy all hard constraints and most soft constraints. Compared with the existing manual procedure, the proposed approach is able to bring significant cost savings and operational efficiency improvement. JTPCP is an intermediate problem between TISP and PTSP. It focuses on clustering thousands of capital track maintenance jobs (based on the defects identified in track inspection) into projects so that the projects can be scheduled in PTSP. A vehicle routing problem based model and a multiple-step heuristic algorithm were developed to solve this problem. Various side constraints such as mutual exclusion constraints and rounding constraints were considered. The proposed approach has been applied in practice and has shown good performance in both solution quality and efficiency.

Estudo da prevalência e da gravidade da dermatite de contacto em 'frango do campo'

O sector avícola enfrenta atualmente dois desafios muito estimulantes. O primeiro decorre do aumento, que se prevê continuar a crescer, nos níveis de procura de carne de aves no mercado interno e internacional; o segundo decorre do facto da criação avícola ter adotado métodos de produção mais intensivos (kg peso vivo/m2/ano) e em maior escala, i.e. com maior concentração animal na mesma exploração. Este carácter vincadamente “industrial” tem merecido uma natural atenção das sociedades e das autoridades pecuárias no sentido desta economia de escala passar a ter num conjunto de instrumentos legais e técnicos o devido contrapeso para a salvaguarda das aves enquanto ser vivo. O presente trabalho tem como ponto de partida a Directiva 2007/43/CE do Conselho de 28 de Junho, relativa ao estabelecimento de regras mínimas para a proteção de frangos de carne. Em virtude de não existir ainda informação suficiente sobre a forma como a qualidade do maneio animal pode ser monitorizada, ao nível do abate, por médicos veterinários e auxiliares oficiais, em frangos de criação especial segundo os modelos definidos no Regulamento (CE) n.º 543/2008, urge realizar estudos neste domínio. O principal objetivo da realização do presente trabalho de campo foi o estudo da ocorrência das dermatites de contacto plantar (pododermatites) e da bolsa sinovial préesternal em frangos produzidos em sistemas de produção considerados “protetores” do bem-estar animal, designadamente os seguintes: i) ar livre; e, ii) extensivo de interior. O estudo foi efetuado num centro de abate de frangos do campo, em Oliveira de Frades, entre Maio de 20012 e Março de 2013. Os animais abatidos foram criados em explorações com contratos de integração situadas no Distrito de Viseu. Os dados foram recolhidos em 39 bandos diferentes da espécie Gallus domesticus, dos quais 1021 carcaças foram avaliadas após evisceração, o que correspondeu ao exame de uma a cada quinze aves da linha de abate. Para a avaliação da pododermatite foi utilizado o método adaptado pela DGAV, enquanto para a avaliação da bursite esternal foi efetuada tendo em conta o modelo aplicado em perus por Berk em 2002. Apesar do modelo estatístico desenvolvido para a análise dos resultados obtidos no presente trabalho exigir um maior número de observações, foi possível identificar com grande precisão alguns fatores de risco que devem ser realçados pela sua relevância no contexto dos sistemas produtivos escrutinados ou no mecanismo fisiopatológico da dermatite de contacto, nomeadamente os seguintes: (i) a idade das aves que, apesar de não ter sido identificada uma relação directa com os scores de pododermatite e bursite, verificou-se que a idade elevada que os animais tipicamente atingem nos sistemas de produção extensivos está associada a uma taxa superior de rejeições pela inspecção sanitária; (ii) o peso pré-abate que, independentemente da inconsistência defendida por diversos autores em relação à influência do peso vivo do frango industrial sobre a dermatite de contacto, nos animais produzidos em regime extensivo, esta variável pode desempenhar um fator chave para a ocorrência desta lesão. De facto, há que realçar que o peso destes animais tem uma importância fulcral na modelação da biomecânica da ave, incluindo na pressão exercida sobre a superfície plantar; (iii) o tipo de sistema de abeberamento, tendo ficado demonstrado que a selecção do tipo de bebedouro tem uma importância peculiar sobre a ocorrência de pododermatite em “frango de campo”, algo que está provavelmente relacionado com a influência exercida sobre o teor de humidade da cama. Globalmente, as frequências de pododermatite e bursite apuradas neste trabalho devem ser consideradas inquietantes. Esta preocupação eleva-se quando se toma consciência que as aves provieram de regimes considerados “amigáveis” e “sustentáveis”, pelo que urge monitorizar adequadamente aqueles sistemas produtivos, melhorar as suas condições e reanalisar os benefícios ao nível do bem-estar animal.

Effect of poultry viscera meal inclusion in broiler diets in different rearing periods on performance, carcass and parts yields

The objective of the present study was to evaluate the effect of the dietary inclusion of poultry viscera meal (VM) on broiler performance and carcass, parts, and abdominal fat yields in broilers by replacing a diet containing VM with a strictly vegetable diet and vice-versa. A number of 720 one-day-old broiler chicks were randomly distributed in 6 groups: G1-basal diet (BD) - corn and soybean based meal, with no VM from 1 to 42 days of age, G2- 8% VM diet from 1 to 42 days, G3- BD from 1 to 21 and 8% VM diet from 22 to 42 days, G4- BD from 1 to 35 and 8% VM diet from 36 to 42 days, G5- 8% VM diet from 1 to 21 days and BD from 22 to 42 days, G6- 8% VM diet from 1 to 35 and BD from 36 to 42 days. Average body weight, weight gain, feed intake, feed conversion ratio (FCR), production efficiency index, and mortality were determined from 1 to 42 days. There was no effect of treatments on performance or mortality, except for FCR, which was significantly better in the group fed VM from 1 to 35 days and withdrawn at the end of rearing (36-42 days). Also, there were no differences in carcass, parts, and abdominal fat yields, showing that VM in broiler diets does not influence yield parameters.

Health, hygiene and biosecurity: tribal knowledge claims in the UK poultry industry

Since 1997 the world has been facing the threat of a human influenza pandemic that may be caused by an avian virus and the poultry industry around the globe has been grappling with the highly pathogenic strain of avian influenza H5N1, or in more informal terms bird flu. The UK poultry industry has lived with and through this threat and its consequences since 2005. This study investigates knowledge claims about health, hygiene and biosecurity as tools to ward off the threat from this virus. It takes a semi-ethnographic and discourse analytic approach to analyse a small corpus of semi-structured interviews carried out in the wake of one of the most publicised outbreaks of H5N1 in Suffolk in 2007. It reveals that claims about what best to do to protect flocks against the risk of disease are divided along lines imposed on the one hand by the structure of the industry and on the other by more 'tribal' lines drawn by knowledge and belief systems about purity and dirt, health and hygiene.

Evaluation of the use of PetrifilmTM EB count plates for the enumeration of Enterobacteriaceae in poultry samples.

Um teste rápido, que apresente o resultado em curto período de tempo, que seja simples, sensível para detectar baixos níveis de micro-organismos, preciso e que não seja caro, seria o mais adequado para a rotina laboratorial da indústria de alimentos ou mesmo para os laboratórios de Saúde Pública. Um dos métodos alternativos prontos para o uso, comercialmente disponíveis no mercado, são as placas PetrifilmTM. O objetivo deste estudo foi avaliar se há diferença estatística significativa entre o método convencional - empregando o ágar vermelho violeta bile glicose ? e o método alternativo, PetrifilmTM EB (3M Company), para a enumeração de Enterobacteriaceae em carcaças de frango.

Co-Composting of Poultry Manure with Different Organic Amendments

To study the influence of different organic amendments on the quality of poultry manure compost, three pilot composting trials were carried out with different mixes: poultrymanure/carcasse meal/ashes/grape pomace (Pile 1), poultry manure/cellulosic sludge (Pile 2) and poultry manure (Pile 3). For all piles, wood chips were applied as bulking agent. The process was monitored, over time, by evaluating standard physical and chemical parameters, such as, pH, electric conductivity, moisture, organic matter and ash content, total carbon and total nitrogen content, carbon/nitrogen ratio (C/N) and content in mineral elements. Piles 1 and 2 reached a thermophilic phase, however having different trends. Pile 1 reached this phase earlier than Pile 2. For both, the pH showed a slight alkaline character and the electric conductivity was lower than 2 mS/cm. Also, the initial C/N value was 22 and reached values lower than 15 at the end of composting process. The total N content of the Pile 1 increased slightly during composting, in contrast with the others piles. At the end of composting process, the phosphorus content ranged between 54 and 236 mg/kg dry matter, for Pile 2 and 3, respectively. Generally, the Piles 1 and 3 exhibited similar heavy metals content. This study showed that organic amendments can be used as carbon source, given that the final composts presented parameters within the range of those recommended in the 2nd Draft of EU regulation proposal (DG Env.A.2 2001) for compost quality.

The Rational for Auto Vaccines in Poultry Colibacillosis

Colibacillosis is a rather important economic problem for poultry production, associated to Avian Pathogenic Escherichia coli (APEC) strains, which may cause several extraintestinal pathologies, such as airsacculitis and cellulitis in broiler chickens, and salpingitis and peritonitis in broiler breeders, leading to septicemic mortality. Control of morbidity and mortality in the outbrakes of colibacillosis may be performed with antibiotics and/or by vaccination. The use antibiotics is frequently inef - fective as Escherichia coli ( E. coli ) is considered the largest reservoir of antimicrobial resistance, characteristic that may even transmit to other bacteria, turning the situation into a serious problem of public health. Vaccination may be the alternative solution but as many different strains arise, flock-specific autovaccines seem to be needed under several possible protocols, with live attenuated and/or inactivated vaccines from different strains that should be identified and characterized according to their virulence factors, within different flocks.