Desenvolvimento de um aditivo natural à base de catequina: otimização da extração e estabilização a partir de frutos de Arbutus unedo L.

The common Mediterranean ornamental strawberry-tree (Arbutus unedo L.) produces an edible reddish sweet berry that is found to be bland and tasteless unless it is consumed overripe, otherwise it is discarded or used as basic agricultural sub residue. The bioactive properties of this fruit have been reported and related with phenolic compounds, mainly flavan-3-ols, such as catechin and procyanidins, which has opened the opportunity to exploit their extraction from alternative sources.The common Mediterranean ornamental strawberry-tree (Arbutus unedo L.) produces an edible reddish sweet berry that is found to be bland and tasteless unless it is consumed overripe, otherwise it is discarded or used as basic agricultural sub residue. The bioactive properties of this fruit have been reported and related with phenolic compounds, mainly flavan-3-ols, such as catechin and procyanidins, which has opened the opportunity to exploit their extraction from alternative sources. This study compares and optimizes the maceration, microwave and ultrasound extraction techniques in the recovery of a catechin extract from Arbutus unedo L. fruits and evaluate the stability of flavan-3-ols during storage and application processes. To obtain conditions that maximize the catechin extraction yield, a response surface methodology was used. Maceration and microwave extractions were found to be the most effective methods, capable of yielding 1.38±0.1 and 1.70±0.3 mg of catechin/g dry weight (dw) in the corresponding optimal extraction conditions. The optimal conditions for maceration were 93.2±3.7 min, 79.6±5.2 ºC and 23.1±3.7 % of ethanol, while for the microwave extraction were 42.2±4.1 min, 137.1±8.1 ºC and 12.1±1.1 % of ethanol. The microwave system was a quicker solution, conducting to slightly higher yields of catechin than maceration, but this one needed lower temperatures to reach similar yields. The ultrasound method was the least effective solution in terms of catechin yield extraction (0.71±0.1 mg/g at 42.4±3.6 min, 314.9±21.2 W and 40.3±3.8 %. ethanol). The stability was tested with of the catechin-enriched extract (60% flavan-3-ols and 22% catechin), obtained under the best maceration conditions, was tested. Therefore, catechin-enriched extracts were submitted to physical and chemical stability studies, considering the main affecting variables (time, temperature and pH): i) a stability study of the extracts during storage as powder system; and ii) a stability study of the extracts in simulated food environment (aqueous solution system). The measured responses were the flavan-3-ols and catechin contents, determined by HPLC-DAD, and the antioxidant activity of the extracts evaluated by hydrophilic assays. Mechanistic and phenomenological equations were used to describe the responses, and the optimal conditions for flavan-3-ols (including catechin) stability as powder extract during a month were pH= 5.4 and T= -20ºC; while its stability in aqueous solution remained during the 24 h of application at pH<4 and T<30ºC. This study compares and optimizes the maceration, microwave and ultrasound extraction techniques in the recovery of a catechin extract from Arbutus unedo L. fruits and evaluate the stability of flavan-3-ols during storage and application processes. To obtain conditions that maximize the catechin extraction yield, a response surface methodology was used. Maceration and microwave extractions were found to be the most effective methods, capable of yielding 1.38±0.1 and 1.70±0.3 mg of catechin/g dry weight (dw) in the corresponding optimal extraction conditions. The optimal conditions for maceration were 93.2±3.7 min, 79.6±5.2 ºC and 23.1±3.7 % of ethanol, while for the microwave extraction were 42.2±4.1 min, 137.1±8.1 ºC and 12.1±1.1 % of ethanol. The microwave system was a quicker solution, conducting to slightly higher yields of catechin than maceration, but this one needed lower temperatures to reach similar yields. The ultrasound method was the least effective solution in terms of catechin yield extraction (0.71±0.1 mg/g at 42.4±3.6 min, 314.9±21.2 W and 40.3±3.8 %. ethanol). The stability was tested with of the catechin-enriched extract (60% flavan-3-ols and 22% catechin), obtained under the best maceration conditions, was tested. Therefore, catechin-enriched extracts were submitted to physical and chemical stability studies, considering the main affecting variables (time, temperature and pH): i) a stability study of the extracts during storage as powder system; and ii) a stability study of the extracts in simulated food environment (aqueous solution system). The measured responses were the flavan-3-ols and catechin contents, determined by HPLC-DAD, and the antioxidant activity of the extracts evaluated by hydrophilic assays. Mechanistic and phenomenological equations were used to describe the responses, and the optimal conditions for flavan-3-ols (including catechin) stability as powder extract during a month were pH= 5.4 and T= -20ºC; while its stability in aqueous solution remained during the 24 h of application at pH<4 and T<30ºC.

Otimização do método QuEChERS para determinação de agrotóxicos, fármacos e produtos de cuidado pessoal em lodo de ETA por LC-ESI-MS/MS

O lodo gerado em Estação de Tratamento de Água (ETA) durante as etapas de floculação e decantação é classificado como resíduo não inerte. Estudos recentes apontam para uma diminuição na concentração de agrotóxicos, fármacos e Produtos de Cuidado Pessoal (PCP) em águas, após o seu tratamento. Uma possível explicação seja que estes compostos possam estar ficando aderidos ao lodo; entretanto, a investigação desses compostos no lodo de ETA é bastante reduzida. Neste trabalho, foi realizada a otimização do método QuEChERS com determinação por Cromatografia Líquida acoplada a Espectrometria de Massas sequencial para analisar agrotóxicos (atrazina, simazina, clomazona e tebuconazol), fármacos (amitriptilina, cafeína, diclofenaco e ibuprofeno) e PCP (metilparabeno, propilparabeno, triclocarban e bisfenol A) em lodo de ETA, uma matriz bastante complexa, constituída basicamente de compostos inorgânicos (areia, argila e silte) e orgânicos (substâncias húmicas). Após otimizado, o método apresentou limites de quantificação ente 1 e 50 µg kg-1 e as curvas analíticas apresentaram valores de r maiores que 0,98. As recuperações variaram entre 50 e 120% com RSD ≤ 15%. O efeito matriz foi avaliado e observou-se a supressão do sinal para a maioria dos compostos, sendo o efeito compensado utilizando a quantificação por superposição na matriz. O método foi aplicado em amostras de lodo de ETA e foram identificados tebuconazol e metilparabeno em concentrações

Otimização da extração de ergosterol assistida por microondas a partir de Agaricus bisporus L., aplicando a técnica estatística de superfície e resposta combinada com a técnica de HPLC-UV

O aumento de consumo de cogumelos tem-se verificado em todo o mundo, não só pelo seu valor nutricional, sabor apurado e textura, mas também pelas suas propriedades medicinais. Existem vários estudos científicos que descrevem os benefícios do consumo de cogumelos, que advêm da sua riqueza em compostos bioativos, tais como micosteróis, em particular, ergosterol. Agaricus bisporus L. é o cogumelo mais consumido em todo o mundo, sendo a sua fração de esteróis constituída essencialmente por ergosterol (90%) [1], tornando a sua extração um tópico de elevado interesse já que esta molécula apresenta elevado valor comercial e inúmeras aplicações nas indústrias alimentar, farmacêutica e cosmética. Segundo a literatura, o teor de ergosterol pode variar entre 3 e 9 mg por g de cogumelo seco. Atualmente, os métodos tradicionais tais como a maceração e a extração em Soxhlet estão a ser substituídos por metodologias emergentes, nomeadamente a extração assistida por microondas, visando diminuir a quantidade de solvente utilizado e o tempo de extração e, naturalmente, aumentar o rendimento da mesma. No presente trabalho, utilizou-se A. bisporus como fonte de ergosterol, tendo-se otimizado as seguintes variáveis relevantes para a sua extração pela tecnologia de microondas (MAE): tempo (0-20 min), temperatura (60-210 ºC) e razão sólido-líquido (1-20 g/L). O solvente utilizado foi o etanol tendo-se aplicado a técnica estatística de superfície de resposta por forma a gerar modelos matemáticos que permitissem maximizar a resposta e otimizar as variáveis que afetam a extração de ergosterol. O conteúdo em ergosterol foi monitorizado por HPLC-UV. Os resultados demonstraram que a técnica MAE é promissora para a extração de ergosterol, tendo-se obtido, para as condições ótimas (20,4 min, 121,5ºC e 1,6 g/L), 569,4 mg ergosterol/100 g de massa seca, valor similar ao obtido com extração convencional por Soxhlet (671,5±0,5 mg/100 g de massa seca). Em síntese, a extração assistida por microondas demonstrou ser uma tecnologia eficiente para maximizar o rendimento de extração em ergosterol.

Caracterização estrutural e avaliação das atividades farmacológicas da fucana B extraída da alga Dictyota menstrualis

Seaweeds are a major source of biologically active compounds . In the extracellular matrix of these organisms are sulfated polysaccharides that functions as structural components preventing it against dehydration. The fraction 0.9 (FucB) rich in sulfated fucans obtained from brown seaweed Dictyota menstrualis was chemical characterized and evaluated for pharmacological activity by testing anticoagulant activity, stimulatory action on the synthesis of an antithrombotic heparan sulfate, antioxidant activity and its effects in cell proliferation. The main components were FucB carbohydrates (49.80 ± 0.10 %) and sulfate (42.30 ± 0.015 %), with phenolic compounds ( 3.86 ± 0.016 %) and low protein contamination ( 0.58 ± 0.001 % ) . FucB showed polydisperse profile and analysis of signals in the infrared at 1262, 1074 and 930 cm -1 and 840 assigned to S = O bonds sulfate esters , CO bond presence of 3,6- anhydrogalactose , β -D- galactose non- sulfated sulfate and the axial position of fucose C4 , respectively. FucB exhibited moderate anticoagulant activity , the polysaccharides prolonged time (aPTT ) 200 ug ( > 90s ) partial thromboplastin FucB no effect on prothrombin time (PT), which corresponds to the extrinsic pathway of coagulation was observed. This stimulation promoted fraction of about 3.6 times the synthesis of heparan sulfate (HS) by endothelial cells of the rabbit aorta ( RAEC ) in culture compared with cells not treated with FucB . This has also been shown to compete for the binding site with heparin. The rich fraction sulfated fucans exhibited strong antioxidant activity assays on total antioxidant (109.7 and 89.5 % compared with BHT and ascorbic acid standards ) , reducing power ( 71 % compared to ascorbic acid ) and ferric chelation ( 71 , comparing with 5 % ascorbic acid). The fraction of algae showed cytostatic activity on the RAEC cells revealed that the increase of the synthesis of heparan sulfate is not related to proliferation. FucB showed antiproliferative action on cell lines modified as Hela and Hep G2 by MTT assay . These results suggest that FucB Dictyota menstrualis have anticoagulant , antithrombotic , antioxidant potential as well as a possible antitumor action, promoting the stimulation of the synthesis of antithrombotic HS by endothelial cells and is useful in the prevention of thrombosis, also due to its inhibitory action on species reactive oxygen ( ROS ) in some in vitro systems , being involved in promoting a hypercoagulable state

Otimização dos parâmetros de maquinagem no processo de fresagem

Cada vez mais, os principais objetivos na indústria é a produção a baixo custo, com a máxima qualidade e com o tempo de fabrico o mais curto possível. Para atingir esta meta, a indústria recorre, frequentemente, às máquinas de comando numérico (CNC), uma vez que com esta tecnologia torna se capaz alcançar uma elevada precisão e um tempo de processamento mais baixo. As máquinas ferramentas CNC podem ser aplicadas em diferentes processos de maquinagem, tais como: torneamento, fresagem, furação, entre outros. De todos estes processos, o mais utilizado é a fresagem devido à sua versatilidade. Utiliza-se normalmente este processo para maquinar materiais metálicos como é o caso do aço e dos ferros fundidos. Neste trabalho, são analisados os efeitos da variação de quatro parâmetros no processo de fresagem (velocidade de corte, velocidade de avanço, penetração radial e penetração axial), individualmente e a interação entre alguns deles, na variação da rugosidade num aço endurecido (aço 12738). Para essa análise são utilizados dois métodos de otimização: o método de Taguchi e o método das superfícies. O primeiro método foi utilizado para diminuir o número de combinações possíveis e, consequentemente, o número de ensaios a realizar é denominado por método de Taguchi. O método das superfícies ou método das superfícies de resposta (RSM) foi utilizado com o intuito de comparar os resultados obtidos com o método de Taguchi, de acordo com alguns trabalhos referidos na bibliografia especializada, o RSM converge mais rapidamente para um valor ótimo. O método de Taguchi é muito conhecido no setor industrial onde é utilizado para o controlo de qualidade. Apresenta conceitos interessantes, tais como robustez e perda de qualidade, sendo bastante útil para identificar variações do sistema de produção, durante o processo industrial, quantificando a variação e permitindo eliminar os fatores indesejáveis. Com este método foi vi construída uma matriz ortogonal L16 e para cada parâmetro foram definidos dois níveis diferentes e realizados dezasseis ensaios. Após cada ensaio, faz-se a medição superficial da rugosidade da peça. Com base nos resultados obtidos das medições da rugosidade é feito um tratamento estatístico dos dados através da análise de variância (Anova) a fim de determinar a influência de cada um dos parâmetros na rugosidade superficial. Verificou-se que a rugosidade mínima medida foi de 1,05m. Neste estudo foi também determinada a contribuição de cada um dos parâmetros de maquinagem e a sua interação. A análise dos valores de “F-ratio” (Anova) revela que os fatores mais importantes são a profundidade de corte radial e da interação entre profundidade de corte radial e profundidade de corte axial para minimizar a rugosidade da superfície. Estes têm contribuições de cerca de 30% e 24%, respetivamente. Numa segunda etapa este mesmo estudo foi realizado pelo método das superfícies, a fim de comparar os resultados por estes dois métodos e verificar qual o melhor método de otimização para minimizar a rugosidade. A metodologia das superfícies de resposta é baseada num conjunto de técnicas matemáticas e estatísticas úteis para modelar e analisar problemas em que a resposta de interesse é influenciada por diversas variáveis e cujo objetivo é otimizar essa resposta. Para este método apenas foram realizados cinco ensaios, ao contrário de Taguchi, uma vez que apenas em cinco ensaios consegue-se valores de rugosidade mais baixos do que a média da rugosidade no método de Taguchi. O valor mais baixo por este método foi de 1,03μm. Assim, conclui-se que RSM é um método de otimização mais adequado do que Taguchi para os ensaios realizados. Foram obtidos melhores resultados num menor número de ensaios, o que implica menos desgaste da ferramenta, menor tempo de processamento e uma redução significativa do material utilizado.

Extração, caracterização estrutural parcial e atividades farmacológicas do olginato obtido da alga marrom Lobophora variegata (Lamouroux) Oliveira Filho, 1977

The alginic acid or alginates are acidic polysaccharides found in brown seaweed widely used in food, cosmetic, medical and pharmaceutical industry. This paper proposes the extraction, chemical characterization and verification of the pharmacological activities of brown seaweed variegata Lobophora . The alginate was extracted from the seaweed Lobophora variegata and part was sulphated for comparative purposes. The native extract showed 42% total sugar, 65% uronic acid, 0,36 % protein and 0% of sulfate, while the sulfate showed 39% , 60%, 0.36% and 27,92 % respectively. The presence of a sulfate group may be observed by the metachromasia with toluidine blue in electrophoresis system and characteristic vibration 1262,34 cm-1 in infrared spectroscopy connections assigned to S = O. We observed the formation of films and beads of native alginate, where more concentrated solution 6% resulted in a thicker and more consistent film. Native alginate showed proliferative activity at concentrations (25 and 50 mcg), (50 mg) and (100 mg) in 3T3 cell line in 24h, 48h and 72h, respectively , as the sulfated (100 mg) in 24 . Also showed antiproliferative or cytotoxic activity in HeLa cells of strain, (25 and 100 mg), (25 and 100 mg) and (25, 50 and 100 mg), to native, now for the sulfate concentrations (100 mg) in 24 (25, 50 and 100 mg) in 48 hours, and (50 and 100 mg ) 72h. For their antioxidant activity, the sulfated alginates have better total antioxidant activity reaching 29 % of the native activity while 7.5 % of activity . For the hydroxyl radical AS showed high inhibition ( between 77-83 % ) in concentrations, but the AN surpassed these numbers in the order of 78-92 % inhibition. The reducing power of AN and AS ranged between 39-82 % . In the method of ferric chelation NA reached 100 % chelating while the AS remained at a plateau oscillating 6.5%. However, in this study , we found alginates with promising pharmacological activities, to use in various industries as an antioxidant / anti-tumor compound

Teste de um modelo estrutural preditor do suporte instrumental e emocional em adultos idosos

Dissertação de Mestrado apresentada ao Instituto Superior de Psicologia Aplicada para obtenção de grau de Mestre na especialidade de Psicologia Clínica.

Caminhos de sobrevivência institucional: a gestão do Núcleo de Oficinas e Artes Profissionalizantes Laís Aderne

The object of this study is the organizational management, particularly the relational processenvironment organization focused on the survival of the space Department of the Arts and Crafts Mestre Raimundo Cardoso linked to the structural arrangement of the Liceu do Paracuri.. Aimed to understand the ways of organizational survival, from the actors' perception of the Center for Arts Career Workshops and Lais Aderne, with investments that discuss the theoretical models of management, institutional theory, cultural organization and institutionalization of public education requirement of the municipal light LDB. (1996) used a qualitative approach with a view to RICHARDSON (1985). The data generated were analyzed based on the technique of content analysis, the thematic type [categorical] Bardin (1977). The results indicate that the institutionalization of the arrangement of the Liceu do Paracuri emerges meet the legal requirement of the autonomy of municipal educational administration under the aegis of sustainable development, quality of life and basic education from the municipal Hélio Gueiros (1993-1996 ). More specifically the Center for Arts and Crafts Laís Aderne, the unit of analysis, the subjects said that this space is designed as a link between the demands of school and community searching through interdisciplinary activities educate and train manpower mainly potter. They did mention the existence of institutional factors (history, culture, habits, values) represent a strong socio-cultural element to the actors belonging to the core that guides behavior and actions of these individuals, fueled by a sense of hope, inclusion of future artisans in culture ceramist. It made a shared management, the existence of a unique work through cultural revival. However, over the course of time, the core is faced with dilemmas of managing transitions mainly regarding governmental, technological beyond endurance by the craftsmen for the optimization of their work. The conclusion - that the paths chosen for the organizational survival of the core meaning and guiding their actions in the systematization of conduct, representations, memories and traditions through habits and choices of consensus, the viewpoint of the actors

Género, saúde funcional subjectiva e depressão em adultos idosos: Teste de um modelo estrutural

Dissertação de Mestrado apresentada ao Instituto Superior de Psicologia Aplicada para obtenção de grau de Mestre na especialidade de Psicologia Clínica.

Otimização e análise mecânica de pastas geopoliméricas para uso em poços sujeitos à injeção cíclica de vapor

Oil wells subjected to cyclic steam injection present important challenges for the development of well cementing systems, mainly due to tensile stresses caused by thermal gradients during its useful life. Cement sheath failures in wells using conventional high compressive strength systems lead to the use of cement systems that are more flexible and/or ductile, with emphasis on Portland cement systems with latex addition. Recent research efforts have presented geopolymeric systems as alternatives. These cementing systems are based on alkaline activation of amorphous aluminosilicates such as metakaolin or fly ash and display advantageous properties such as high compressive strength, fast setting and thermal stability. Basic geopolymeric formulations can be found in the literature, which meet basic oil industry specifications such as rheology, compressive strength and thickening time. In this work, new geopolymeric formulations were developed, based on metakaolin, potassium silicate, potassium hydroxide, silica fume and mineral fiber, using the state of the art in chemical composition, mixture modeling and additivation to optimize the most relevant properties for oil well cementing. Starting from molar ratios considered ideal in the literature (SiO2/Al2O3 = 3.8 e K2O/Al2O3 = 1.0), a study of dry mixtures was performed,based on the compressive packing model, resulting in an optimal volume of 6% for the added solid material. This material (silica fume and mineral fiber) works both as an additional silica source (in the case of silica fume) and as mechanical reinforcement, especially in the case of mineral fiber, which incremented the tensile strength. The first triaxial mechanical study of this class of materials was performed. For comparison, a mechanical study of conventional latex-based cementing systems was also carried out. Regardless of differences in the failure mode (brittle for geopolymers, ductile for latex-based systems), the superior uniaxial compressive strength (37 MPa for the geopolymeric slurry P5 versus 18 MPa for the conventional slurry P2), similar triaxial behavior (friction angle 21° for P5 and P2) and lower stifness (in the elastic region 5.1 GPa for P5 versus 6.8 GPa for P2) of the geopolymeric systems allowed them to withstand a similar amount of mechanical energy (155 kJ/m3 for P5 versus 208 kJ/m3 for P2), noting that geopolymers work in the elastic regime, without the microcracking present in the case of latex-based systems. Therefore, the geopolymers studied on this work must be designed for application in the elastic region to avoid brittle failure. Finally, the tensile strength of geopolymers is originally poor (1.3 MPa for the geopolymeric slurry P3) due to its brittle structure. However, after additivation with mineral fiber, the tensile strength became equivalent to that of latex-based systems (2.3 MPa for P5 and 2.1 MPa for P2). The technical viability of conventional and proposed formulations was evaluated for the whole well life, including stresses due to cyclic steam injection. This analysis was performed using finite element-based simulation software. It was verified that conventional slurries are viable up to 204ºF (400ºC) and geopolymeric slurries are viable above 500ºF (260ºC)

Avaliação de concretos reforçados por confinamento com manta de fibra de vidro estrutural e pré-impreganada

Due to the occurrence of diseases in the use of structural reinforcements in composites, with presentation of concrete blanket detachment, has been identified the need to evaluate the performance of concrete reinforced with glass fiber. This study aims to evaluate these concretes by means of testing methodologies, using concrete with low resistance with structural reinforcement for confinement by preimpregnated glass fiber and traditional fiberglass blanket. The first stage of work was the development of methodologies for analysis, opting for four types, such as the acoustic survey, strength to compressive, the pull-off and ultrasound. Next, tests were carried out using the four selected methodologies in 30 of proof-of-specimens by 5x10 cm, 15 were reinforced with the traditional fiberglass blanket with 5specimens exposed to test a marine environment of marine coastline of Natal-RN and 15 were reinforced with a pre-impregnated glass fiber blanket, as well as 5specimens exposed to a test environment of the marine coastline of Natal-RN. After conducting the acoustic survey, it has been verified a lack of delaminating and air bubbles in the samples, confirming the absence of gross shortcomings in the implementation of the ribs both the traditional fiberglass blanket and in the preimpregnated fiber glass blanket. After carrying out methods of pull-off and compressive strengthening test it was observed that the reinforced proof-bodies with pre-impregnated glass blanket showed maximum stresses higher than the traditional fiberglass blanket; consequently a greater grip with the formation of a smaller area of . fracture, unlike traditional glass mat, which showed lower maximum stresses, with a greater area of fracture. It was also found that the traditional fiberglass blanket presented detachment of blanket-concrete interface, unlike the pre-impregnated fiberglass blanket, which showed a better grip on the blanket-concrete interface. In the trial of ultrasound there was no presence of cracks in the blanket-concrete interface, yielding to both blankets good compactness of the concrete. At the end of this work, they were developed and proposed two methods of testing for evaluation of reinforced concrete structures with composites, for standardization, the acoustic survey and pull-off

Gestão de transportes urbanos coletivos: utilização de modelos de otimização

A sustentabilidade das organizações empresariais deve constar sempre do pensamento económico-social, merecendo particular acuidade a situação das organizações portugueses públicas de transportes, que têm sido atualmente, neste propósito, bastante questionadas, especialmente devido ao estado das finanças públicas nacionais, tornando-se portanto urgente melhorar a sua gestão. Ao longo deste documento, apresenta-se um contributo para a consecução deste desiderato, discutindo-se diferentes modelos de otimização que poderão ser aplicados a este setor, sendo um destes modelos materializado num estudo de caso. Esta otimização deverá contribuir para uma melhoria na gestão destas organizações, tornando-as mais eficientes e mais eficazes, com reflexos nos seus resultados operacionais.

Otimização do processo de síntese do aluminato de cobalto via método de polimerização de complexos (MPC) através do planejamento fatorial fracionado

In the ceramics industry are becoming more predominantly inorganic nature pigments. Studies in this area allow you to develop pigments with more advanced properties and qualities to be used in the industrial context. Studies on synthesis and characterization of cobalt aluminate has been widely researched, cobalt aluminate behavior at different temperatures of calcinations, highlighting especially the temperatures of 700, 800 and 900° C that served as a basis in the development of this study, using the method of polymerization of complex (CPM), economic, and this method applied in ceramic pigment synthesis. The procedure was developed from a fractional factorial design 2 (5-2) in order to optimize the process of realization of the cobalt aluminate (CoAl2O4), having as response surfaces the batch analysis data of Uv-vis spectroscopy conducted from the statistic software 7.0, for this were chosen five factors as input variables: citric acid (stoichiometric manner), puff or pyrolysis time (h), temperature (° C), and calcinations (° C/min), at levels determined for this study. By applying statistics in the process of obtaining the CoAl2O4 is possible the study of these factors and which may have greater influence in getting the synthesis. The pigments characterized TG/DSC analyses, and x-ray diffraction (XRD) and scanning electron microscope (SEM/EDS) in order to establish the structural and morphological aspects of pigment CoAl2O4, among the factors studied it were found to statically with increasing calcinations temperature 700°< 800 <900 °C, the bands of Uv-vis decrease with increasing intensity of absorbance and that with increasing time of puff or pyrolysis (h) there is an increase in bands of Uv-vis proportionally, the generated model set for the conditions proposed in this study because the coefficient of determination can explain about 99.9% of the variance (R²), response surfaces generated were satisfactory, so it s possible applicability in the ceramics industry of pigments