A proposal for a repertoire of software testing methods

Nowadays software testing and quality assurance have a great value in software development process. Software testing does not mean a concrete discipline, it is the process of validation and verification that starts from the idea of future product and finishes at the end of product’s maintenance. The importance of software testing methods and tools that can be applied on different testing phases is highly stressed in industry. The initial objectives for this thesis were to provide a sufficient literature review on different testing phases and for each of the phases define the method that can be effectively used for improving software’s quality. Software testing phases, chosen for study are: unit testing, integration testing, functional testing, system testing, acceptance testing and usability testing. The research showed that there are many software testing methods that can be applied at different phases and in the most of the cases the choice of the method should be done depending on software type and its specification. In the thesis the problem, concerned to each of the phases was identified; the method that can help in eliminating this problem was suggested and particularly described.

Structured software development with the IPIDDDT method - A lean method for small agile organizations

A software development process is a predetermined sequence of steps to create a piece of software. A software development process is used, so that an implementing organization could gain significant benefits. The benefits for software development companies, that can be attributed to software process improvement efforts, are improved predictability in the development effort and improved quality software products. The implementation, maintenance, and management of a software process as well as the software process improvement efforts are expensive. Especially the implementation phase is expensive with a best case scenario of a slow return on investment. Software processes are rare in very small software development companies because of the cost of implementation and an improbable return on investment. This study presents a new method to enable benefits that are usually related to software process improvement to small companies with a low cost. The study presents reasons for the development of the method, a description of the method, and an implementation process for the method, as well as a theoretical case study of a method implementation. The study's focus is on describing the method. The theoretical use case is used to illustrate the theory of the method and the implementation process of the method. The study ends with a few conclusions on the method and on the method's implementation process. The main conclusion is that the method requires further study as well as implementation experiments to asses the value of the method.

Potentiometric quantification and speciation of oxygenated groups in humic substances using BEST7 software

In this study the BEST7 software was employed to quantify different classes of functional groups and to model the proton titration behavior of humic substances. To illustrate the process, the Suwannee River fulvic acid of the IHSS (International Humic Substances Society) was used. Five categories - two classes of phenolic groups (phenol and cathecol), two classes of carboxylic groups (benzoic and phtalic) and the combination between them (salicylic) - of oxygenated groups were considered as being responsible for the potentiometric behavior of the sample and were quantitatively determined. The most and the least abundant groups were cathecol (3.300 ± 0.010 mmol g-1) and phenol (1.225 ± 0.070 mmol g-1), respectively. The estimated equilibrium constants were also determined and were in good agreement with the literature values for phenol and cathecol groups and for benzoic, phtalic and salicylic acids. Distribution diagrams of the species were generated with the software SPE and SPEPLOT.

Customized agile development process for embedded software development

Agile software development has grown in popularity starting from the agile manifesto declared in 2001. However there is a strong belief that the agile methods are not suitable for embedded, critical or real-time software development, even though multiple studies and cases show differently. This thesis will present a custom agile process that can be used in embedded software development. The reasons for presumed unfitness of agile methods in embedded software development have mainly based on the feeling of these methods providing no real control, no strict discipline and less rigor engineering practices. One starting point is to provide a light process with disciplined approach to the embedded software development. Agile software development has gained popularity due to the fact that there are still big issues in software development as a whole. Projects fail due to schedule slips, budget surpassing or failing to meet the business needs. This does not change when talking about embedded software development. These issues are still valid, with multiple new ones rising from the quite complex and hard domain the embedded software developers work in. These issues are another starting point for this thesis. The thesis is based heavily on Feature Driven Development, a software development methodology that can be seen as a runner up to the most popular agile methodologies. The FDD as such is quite process oriented and is lacking few practices considered commonly as extremely important in agile development methodologies. In order for FDD to gain acceptance in the software development community it needs to be modified and enhanced. This thesis presents an improved custom agile process that can be used in embedded software development projects with size varying from 10 to 500 persons. This process is based on Feature Driven Development and by suitable parts to Extreme Programming, Scrum and Agile Modeling. Finally this thesis will present how the new process responds to the common issues in the embedded software development. The process of creating the new process is evaluated at the retrospective and guidelines for such process creation work are introduced. These emphasize the agility also in the process development through early and frequent deliveries and the team work needed to create suitable process.

New computer software for defining the three-dimensional geometry for a centrifu- gal compressor impeller

In this thesis, a computer software for defining the geometry for a centrifugal compressor impeller is designed and implemented. The project is done under the supervision of Laboratory of Fluid Dynamics in Lappeenranta University of Technology. This thesis is similar to the thesis written by Tomi Putus (2009) in which a centrifugal compressor impeller flow channel is researched and commonly used design practices are reviewed. Putus wrote a computer software which can be used to define impeller’s three-dimensional geometry based on the basic geometrical dimensions given by a preliminary design. The software designed in this thesis is almost similar but it uses a different programming language (C++) and a different way to define the shape of the impeller meridional projection.

Beyond the obvious : three acts in educational drama

Researching research is not a common theme in educational drama. Nor is the educational drama process from a participant perspective a typical focus of research, at least not if the participants are disabled. Yet this is the theme of this thesis, a drama in three acts. The aim of this thesis is to describe, analyse, and discuss both the ways in which research within educational drama can be carried out and represented, and the experiences of the participants of the educational drama process. The theoretical framework that steers the research process is built up of two pairs of frames, each of them, like Russian nesting dolls, containing further frames. The first frame, relating to the outcomes of conducting research in educational drama, comprises philosophical, representational, and personal theories. As the second question asks what educational drama is, the subject related frame is built up of pedagogical, drama educational, and aesthetic theories. The study in its entirety follows the structure of the researcher’s hermeneutical learning process and takes the form of a journey starting from what is familiar, stretching towards what is new and different, and finally returning back to the beginning with a new view on what was there at the start. The thesis consists of two separate but related studies. The first, a familiar study conducted earlier, Alpha in Act I, was carried out among upper secondary school pupils. In the second, the new and therefore unfamiliar study, Omega in Act III, the participants are adult individuals who are physically and communicatively disabled. In between these two Acts an element of “Verfremdung” where the Alpha study is systematically scrutinized as the purpose is to teach and to manage the reader to think. Meta-discussions on the philosophical issues of the study are conducted throughout the text, parallel to the empirical parts. The outcomes of the first research question show that philosophical, methodical, and representational consistency is crucial for research. While this may sound like stating the obvious, this has nevertheless not always been considered fact, especially not within qualitative research. The outcomes further stress that representational issues are also to be recognized when presenting non-rational aspects of educational drama. By wording the world, through the use of visualising language, the surplus of meanings of educational drama can be, as they are within this study, made visible, sensible, and almost tangible, not only cognitively understandable. The outcomes of the second question point to the different foci of the studies, with Alpha focusing on the rationally retold experiences and Omega focusing on nonrational experiences. The outcomes expose educational drama as a learning process comprising doing, reflecting, and being. The doing aspect communicates the concrete efforts in creating a piece of theatre, while the being aspect relates experiences of being as situated, embodied and sensuous, reciprocal, empowering, aesthetic and artistic, and existential. Reflection is the twine that runs throughout the process and connects both doing and being. In summary, the outcomes could be formulated as “learning from learning how to make theatre”.

Towards increased productivity and quality in software development using agile, lean and collaborative approaches

Dagens programvaruindustri står inför alltmer komplicerade utmaningar i en värld där programvara är nästan allstädes närvarande i våra dagliga liv. Konsumenten vill ha produkter som är pålitliga, innovativa och rika i funktionalitet, men samtidigt också förmånliga. Utmaningen för oss inom IT-industrin är att skapa mer komplexa, innovativa lösningar till en lägre kostnad. Detta är en av orsakerna till att processförbättring som forskningsområde inte har minskat i betydelse. IT-proffs ställer sig frågan: “Hur håller vi våra löften till våra kunder, samtidigt som vi minimerar vår risk och ökar vår kvalitet och produktivitet?” Inom processförbättringsområdet finns det olika tillvägagångssätt. Traditionella processförbättringsmetoder för programvara som CMMI och SPICE fokuserar på kvalitets- och riskaspekten hos förbättringsprocessen. Mer lättviktiga metoder som t.ex. lättrörliga metoder (agile methods) och Lean-metoder fokuserar på att hålla löften och förbättra produktiviteten genom att minimera slöseri inom utvecklingsprocessen. Forskningen som presenteras i denna avhandling utfördes med ett specifikt mål framför ögonen: att förbättra kostnadseffektiviteten i arbetsmetoderna utan att kompromissa med kvaliteten. Den utmaningen attackerades från tre olika vinklar. För det första förbättras arbetsmetoderna genom att man introducerar lättrörliga metoder. För det andra bibehålls kvaliteten genom att man använder mätmetoder på produktnivå. För det tredje förbättras kunskapsspridningen inom stora företag genom metoder som sätter samarbete i centrum. Rörelsen bakom lättrörliga arbetsmetoder växte fram under 90-talet som en reaktion på de orealistiska krav som den tidigare förhärskande vattenfallsmetoden ställde på IT-branschen. Programutveckling är en kreativ process och skiljer sig från annan industri i det att den största delen av det dagliga arbetet går ut på att skapa något nytt som inte har funnits tidigare. Varje programutvecklare måste vara expert på sitt område och använder en stor del av sin arbetsdag till att skapa lösningar på problem som hon aldrig tidigare har löst. Trots att detta har varit ett välkänt faktum redan i många decennier, styrs ändå många programvaruprojekt som om de vore produktionslinjer i fabriker. Ett av målen för rörelsen bakom lättrörliga metoder är att lyfta fram just denna diskrepans mellan programutvecklingens innersta natur och sättet på vilket programvaruprojekt styrs. Lättrörliga arbetsmetoder har visat sig fungera väl i de sammanhang de skapades för, dvs. små, samlokaliserade team som jobbar i nära samarbete med en engagerad kund. I andra sammanhang, och speciellt i stora, geografiskt utspridda företag, är det mera utmanande att införa lättrörliga metoder. Vi har nalkats utmaningen genom att införa lättrörliga metoder med hjälp av pilotprojekt. Detta har två klara fördelar. För det första kan man inkrementellt samla kunskap om metoderna och deras samverkan med sammanhanget i fråga. På så sätt kan man lättare utveckla och anpassa metoderna till de specifika krav som sammanhanget ställer. För det andra kan man lättare överbrygga motstånd mot förändring genom att introducera kulturella förändringar varsamt och genom att målgruppen får direkt förstahandskontakt med de nya metoderna. Relevanta mätmetoder för produkter kan hjälpa programvaruutvecklingsteam att förbättra sina arbetsmetoder. När det gäller team som jobbar med lättrörliga och Lean-metoder kan en bra uppsättning mätmetoder vara avgörande för beslutsfattandet när man prioriterar listan över uppgifter som ska göras. Vårt fokus har legat på att stöda lättrörliga och Lean-team med interna produktmätmetoder för beslutsstöd gällande så kallad omfaktorering, dvs. kontinuerlig kvalitetsförbättring av programmets kod och design. Det kan vara svårt att ta ett beslut att omfaktorera, speciellt för lättrörliga och Lean-team, eftersom de förväntas kunna rättfärdiga sina prioriteter i termer av affärsvärde. Vi föreslår ett sätt att mäta designkvaliteten hos system som har utvecklats med hjälp av det så kallade modelldrivna paradigmet. Vi konstruerar även ett sätt att integrera denna mätmetod i lättrörliga och Lean-arbetsmetoder. En viktig del av alla processförbättringsinitiativ är att sprida kunskap om den nya programvaruprocessen. Detta gäller oavsett hurdan process man försöker introducera – vare sig processen är plandriven eller lättrörlig. Vi föreslår att metoder som baserar sig på samarbete när processen skapas och vidareutvecklas är ett bra sätt att stöda kunskapsspridning på. Vi ger en översikt över författarverktyg för processer på marknaden med det förslaget i åtanke.

Tutorials for MeVEA Simulation Software

The objective of the thesis was to create three tutorials for MeVEA Simulation Software to instruct the new users to the modeling methodology used in the MeVEA Simulation Software. MeVEA Simulation Software is a real-time simulation software based on multibody dynamics. The simulation software is designed to create simulation models of complete mechatronical system. The thesis begins with a more detail description of the MeVEA Simulation Software and its components. The thesis presents the three simulation models and written theory of the steps of model creation. The first tutorial introduces the basic features which are used in most simulation models. The basic features include bodies, constrains, forces, basic hydraulics and motors. The second tutorial introduces the power transmission components, tyres and user input definitions for the different components in power transmission systems. The third tutorial introduces the definitions of two different types of collisions and collision graphics used in MeVEA Simulation Software.

Software interativo: ecocardiografia na avaliaçao da hipertensao arterial

A hipertensao arterial é uma doença muito prevalente, evoluindo com lesoes em órgaos-alvo, alta morbidade e mortalidade. A avaliaçao das repercussoes cardíacas pela ecocardiografia tem papel importante na conduçao clínica dos indivíduos hipertensos, e suas imagens podem ser utilizadas como ferramenta para o ensino. OBJETIVOS: Desenvolver e avaliar um software, construído com base em imagens ecocardiográficas, abordando de forma ilustrativa e interativa a estrutura e funçao cardíacas normais,bem como as alteraçoes induzidas pela hipertensao arterial. MÉTODOS: Foram selecionadas imagens ecocardiográficas de indivíduos normais e com comprometimento cardíaco determinado pela hipertensao (hipertrofia ventricular esquerda, miocardiopatia dilatada e infarto do miocárdio). Com estas imagens foi construído um software no programa multimídia Flash, que foi avaliado por estudantes de Medicina (n=38) e Enfermagem (n=18), também submetidos a pré- e pós-teste. RESULTADOS: Os alunos consideraram o software útil, atraente e adequado as atuais metodologias educacionais proativas,promovendo ganho de conhecimento na compreensao do comprometimento cardíaco na hipertensao arterial. Conclusao: O software foi bem avaliado e considerado útil na aquisiçao de conhecimento numa área específica mais prevalente do comprometimento da saúde do adulto.

Software Educacional: Nematelmintos de Aquisição Passiva

RESUMO Objetivo Desenvolver e avaliar um software educacional com base em imagens parasitológicas de helmintos, abordando de forma ilustrativa e interativa os nematelmintos de transmissão passiva, o que poderá ser útil a professores, profissionais e alunos de graduação das diferentes profissões da saúde na compreensão e identificação dessas verminoses, aproximando-os também da prática profissional. Metodologia O software foi construído com base em um banco de imagens do próprio autor, utilizando o multimídia Flashâ, que permite elaborar animações e simulações em linguagem vetorial, resultando em arquivos pequenos, que podem ser disponibilizados através da web ou em mídias ópticas e magnéticas. A avaliação do produto final foi feita por estudantes de Medicina. Resultados O software foi concluído e bem avaliado pelos estudantes do curso de Medicina (n=97) da Faculdade de Ciências Médicas e da Saúde (FCMS) da PUC/SP. Os pré e pós-testes do material mostraram consistente crescimento do conhecimento, seja por autoavaliação ou por questões objetivas fechadas. Conclusão Os resultados atuais permitem concluir que o software é de grande interesse educacional e poderá ser útil a estudantes, profissionais e docentes da área da saúde.

Analysis of companies' software as a service adoption intention factors

The goal of this study is to develop managerial recommendations for international vendors and system integrators, which offer Software as a Service for enterprise information systems on the Russian market. Those recommendations can be used to develop marketing, sales, new product and service level agreement strategies. For those reasons factors affecting SaaS adoption were determined and their influence on intention to adoption was examined.

Intellectual capital management in international and Russian software companies

The importance of the company’s intellectual capital (IC) increased during the last decades due to knowledge-based economy development. Despite the clear understanding of the IC importance, researchers agree on the fact that many difficulties in management of intangibles still exist from the both theoretical and practical points of view. The goal of the study is to conduct a comparison of IC management approaches used in international and Russian software companies. To carry out a proper comparison and identify similarities and differences, software firms are explored from the point of view of IC, and then be compared in the context of international and Russian sectors. At the end of the study, current IC management findings in international and Russian software companies are presented, and comparison of IC management is done. It was investigated from the comparison that international and Russian software companies have similarities and few principal differences in several IC management areas. The comparison of IC management approaches between international and Russian software companies provide helpful information to both, researchers and practitioners.

When to Utilize Software as a Service

Cloud computing enables on-demand network access to shared resources (e.g., computation, networks, servers, storage, applications, and services) that can be rapidly provisioned and released with minimal management effort. Cloud computing refers to both the applications delivered as services over the Internet and the hardware and system software in the data centers. Software as a service (SaaS) is part of cloud computing. It is one of the cloud service models. SaaS is software deployed as a hosted service and accessed over the Internet. In SaaS, the consumer uses the provider‘s applications running in the cloud. SaaS separates the possession and ownership of software from its use. The applications can be accessed from any device through a thin client interface. A typical SaaS application is used with a web browser based on monthly pricing. In this thesis, the characteristics of cloud computing and SaaS are presented. Also, a few implementation platforms for SaaS are discussed. Then, four different SaaS implementation cases and one transformation case are deliberated. The pros and cons of SaaS are studied. This is done based on literature references and analysis of the SaaS implementations and the transformation case. The analysis is done both from the customer‘s and service provider‘s point of view. In addition, the pros and cons of on-premises software are listed. The purpose of this thesis is to find when SaaS should be utilized and when it is better to choose a traditional on-premises software. The qualities of SaaS bring many benefits both for the customer as well as the provider. A customer should utilize SaaS when it provides cost savings, ease, and scalability over on-premises software. SaaS is reasonable when the customer does not need tailoring, but he only needs a simple, general-purpose service, and the application supports customer‘s core business. A provider should utilize SaaS when it offers cost savings, scalability, faster development, and wider customer base over on-premises software. It is wise to choose SaaS when the application is cheap, aimed at mass market, needs frequent updating, needs high performance computing, needs storing large amounts of data, or there is some other direct value from the cloud infrastructure.

Determinação de fatores de empilhamento através do software Digitora

Este trabalho foi realizado com o objetivo de avaliar o uso do programa computacional Digitora na determinação de fatores de empilhamento. Para isto, foram utilizadas pilhas de madeira de eucalipto, empilhadas manualmente sobre o solo. Após as análises, verificou-se que: a) o software propiciou estimativas precisas dos fatores de empilhamento; b) houve uma leve tendência de superestimação dos fatores pelo Digitora; c) o treinamento do operador com relação à classificação dos pontos sobre as fotografias no Digitora é condição primordial para obtenção de estimativas precisas dos fatores de empilhamentos; e d) as fotografias deverão ser sempre tomadas com o flash e o ZOOM ativados.

Future revenue models: Transformation from textbooks to digital solutions in the educational publishing industry, Case Sanoma Learning

This study was conducted in order to learn how companies’ revenue models will be transformed due to the digitalisation of its products and processes. Because there is still only a limited number of researches focusing solely on revenue models, and particularly on the revenue model change caused by the changes at the business environment, the topic was initially approached through the business model concept, which organises the different value creating operations and resources at a company in order to create profitable revenue streams. This was used as the base for constructing the theoretical framework for this study, used to collect and analyse the information. The empirical section is based on a qualitative study approach and multiple-case analysis of companies operating in learning materials publishing industry. Their operations are compared with companies operating in other industries, which have undergone comparable transformation, in order to recognise either similarities or contrasts between the cases. The sources of evidence are a literature review to find the essential dimensions researched earlier, and interviews 29 of managers and executives at 17 organisations representing six industries. Based onto the earlier literature and the empirical findings of this study, the change of the revenue model is linked with the change of the other dimen-sions of the business model. When one dimension will be altered, as well the other should be adjusted accordingly. At the case companies the transformation is observed as the utilisation of several revenue models simultaneously and the revenue creation processes becoming more complex.