Evolução espaço-temporal da ocupação urbana sobre áreas naturais no município de Natal-RN

In this work the landscape morphodynamics was used to check the strength and importance of the changes carried out by man on the environment over time, in Natal-RN municipality. The occupation of partially preserved natural areas was analyzed, but environmentally fragile, such as riparian forests, vegetation on the banks of waterways, which play regulatory role of the water flow, and the dunes, which guarantee the rapid recharge of aquifers. The impacts of urban sprawl in Natal Southern and West zones Were identified and characterized, through a detailed mapping in the period between 1969 and 2013 the main Permanent Preservation Areas - PPA (banks of rivers and lagoons, and dunes remaining) and their temporal changes. For this were used aerial photographs and satellite imagery, altimetry data, and pre-existing information, which allowed the creation of a spatial database, and evolution of maps of impervious areas, evolution of the use and occupation and Digital Terrain Model (DTM) from contour lines with contour interval of 1 meter. Based on this study presents a diagnosis of the environmental situation and the state of conservation of natural areas, over the last 44 years, compared to human pressures. In general, it was found that the urban settlement has advanced about 60% of studied natural areas. This advance was growing by the year 2006, when there was a slowdown in the process, except for the Environmental Protection Zone (EPZ) 03, where the river Pitimbú and your PPA, which experienced a more significant loss area. The urban occupation affected the natural drainage and contributed to the contamination of groundwater Natal, due to increased sealed area, the release of liquid and solid waste, as well as the removal of riparian vegetation. Changed irreversibly the natural landscape, and reduced the quality and quantity of water resources necessary for the population. Thus, it is necessary to stimulate the adoption of use and protection of PPA planning measures, to the preservation of the San Valley Region inserted into the EPZ 01, and integrate more remaining dunes, in good condition, this EPZ, due to the importance of those remaining on the environment and the maintenance of quality of life. It is suggested, also, protection of catchment areas, such as PPA ponds and Pitimbú River. Finally, it is expected that this study can assist the managers in making decisions in urban and environmental planning of the municipality

Uso da cinza do bagaço da cana-de-açúcar como matéria-prima na substituição dos fundentes para aplicações em porcelanato

The present study aims to evaluate the potential use of bagasse ash from sugar cane (CBC) as a flux, replacing phyllite and/or feldspar in standard industrial mass production of enameled porcelain, verifying the possibility of the CBC contribute to the overall reduction of the coefficient of thermal expansion of the ceramic mass. To this end, as a result of the research, we characterized the raw material components of the standard mass (clay, phyllite, kaolin, feldspar, quartz and talc) and the residue of BCC, by testing by XRF, XRD, AG, DTA and ATG. Specimens (CDP) were manufactured in the dimensions of 100 mm x 50 mm x 8 mm in uniaxial matrix under compaction pressure of 33 MPa, assembled in batches of 3 units subsequently sintered at temperatures of 1150°C to 1210°C by varying the Rating Scale at 10°C, heating and cooling ramp of 50°C/min and 25°C/min, with levels of 1 min, 3 min, 5 min, 8 min, 10 min, 15 min, 30 min and 60 min. analyzing the results of the physical properties of water absorption (WA), linear firing shrinkage (LFS), dilatometric analysis (DTA), flexural strain (SFT) and SEM of the sintered bodies in order to verify the adequacy of CDP to ISO 13006, ISO 10545, NBR 13816 standards; NBR 13817 and NBR 13818. The study showed that the formulations that best suit the requirements of the standards are:. G4 - which was applied in 10% of replacing the CBC phyllite, sintering temperature 1210 ° C for 10 min and porch, and F3 - with application of 7.5% of CBC to replace the feldspar in the sintering temperatures of 1190°C, 1200°C and 1210°C for 10 min and porch. These formulations showed better performance regarding the formation of primary and secondary mullite, with considerable reduction of cracks and pores, meeting the prerequisites of standards for glazed porcelain. The results shows that the use of the CBC as a flux in the preparation of porcelain mass meets standard parameters for the manufacture of the product, and thereby can reduce environmental impact and the cost of production. Therefore, it is recommended to use this residue in the ceramics industry, due to its industrial, commercial and collaborative viability for sustainability.

Desenvolvimento de material BaCexPr1-xO3 (0 ≤ X ≤ 1) com estrutura perovskita para oxidação catalítica do CO a CO2 em reator de leito fixo

Barium Cerate (BaCeO3) is perovskite type structure of ABO3, wherein A and B are metal cations. These materials, or doped, have been studied by having characteristics that make them promising for the application in fuel cells solid oxide, hydrogen and oxygen permeation, as catalysts, etc .. However, as the ceramic materials mixed conductivity have been produced by different synthesis methods, some conditions directly influence the final properties, one of the most important doping Site B, which may have direct influence on the crystallite size, which in turn directly influences their catalytic activity. In this study, perovskite-type (BaCexO3) had cerium gradually replaced by praseodymium to obtain ternary type materials BaCexPr1-xO3 and BaPrO3 binaries. These materials were synthesized by EDTA/Citrate complexing method and the material characterized via XRD, SEM and BET for the identification of their structure, morphology and surface area. Moreover were performed on all materials, catalytic test in a fixed bed reactor for the identification of that person responsible for complete conversion of CO to CO2 at low operating temperature, which step can be used as the subsequent production of synthesis gas (CO + H2) from methane oxidation. In the present work the crystalline phase having the orthorhombic structure was obtained for all compositions, with a morphology consisting of agglomerated particles being more pronounced with increasing praseodymium in the crystal structure. The average crystal size was between 100 nm and 142,2 nm. The surface areas were 2,62 m²g-1 for the BaCeO3 composition, 3,03 m²g-1 to BaCe0,5Pr0,5O3 composition and 2,37 m²g-1 to BaPrO3 composition. Regarding the catalytic tests, we can conclude that the optimal flow reactor operation was 50 ml / min and the composition regarding the maximum rate of conversion to the lowest temperature was BaCeO3 to 400° C. Meanwhile, there was found that the partially replaced by praseodymium, cerium, there was a decrease in the catalytic activity of the material.

Estudo da molhabilidade de superfícies de parafina e aço inoxidável por soluções de tensoativos não iônicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Extração, caracterização e prospecção de atividades farmacológicas de polissacarídeos sulfatados da macroalga verde Caulerpa prolifera

This study aimed to extract, characterize and conduct a prospective analysis of pharmacological activities of sulfated polysaccharides from green seaweed Caulerpa prolifera. Seven fractions (CP-0.3/CP-0.5/CP-0.7/CP-0.9/CP-1.1/CP-1.5/CP-2.0) were obtained from C. prolifera by alkaline proteolysis followed by sequential precipitation in acetone. The physicochemical analyzes indicated that C. prolifera synthesizes a homogalactan (CP-0.9) and different populations of sulfated heteropolysaccharides. In the analysis of anticoagulant activity, all fractions except CP-0.3, influenced the intrinsic coagulation pathway. All fractions showed antioxidant activity in six different assays being more pronounced in hydrogen peroxide scavenging assay, especially CP-0.3, CP-0.7 and CP-0.9 (which obtained 61% of hydrogen peroxide scavenging), in ferric chelation assay (especially CP-0.9 with 56% chelation) and cupric chelation assay (especially CP-2.0 with 78% chelation). With respect to immunomodulatory activity, the presence of CP-0.3, CP-0.7 and CP-0.9 showed an immunogenic potential, increasing the production of nitric oxide (NO) by 48, 142 and 163 times, respectively. Conversely, the NO synthesis fell 73% after the activation of macrophages by LPS, incubated concurrently with CP-2.0. The anti-adipogenic activity of the fractions was also evaluated and CP-1.5 was able to reduce the differentiation of pre-adipocytes (3T3-L1) into adipocytes by 60%, without affecting the cell viability. The fractions CP-0.3, CP-0.5 and CP-0.9 reduced the viability of the HeLa cells (human cervical adenocarcinoma) by 55% and CP-1.5 reduced the viability of the 786-0 cells (human renal adenocarcinoma) by 75%. Leishmanicidal activity and microbicide effect against Carbapenem-resistant Klebsiella pneumoniae (KPC) have not been identified. However, the viability of Staphylococcus epidermidis was reduced by 23.8% in the presence of CP -1.5. All fractions were able to change the formation of calcium oxalate crystals. CP-0.3, CP-0.5 and CP-1.1 only promoted the formation of COD type crystals with a very small size (1 μm). Confocal microscopy and zeta potential data of crystals formed in the presence of the samples showed that the polysaccharides present in the fractions must interact with calcium ions present throughout the crystal lattice, affecting the growth and morphology of crystals The results described herein indicate that the fractions rich in polysaccharides obtained from the green seaweed C. prolifera present a multi therapeutic potential, and subsequent purification steps, as well as research on the mechanisms of action by which these polymers act should be investigated.

Materiais zeolíticos de estrutura MWW: síntese e caracterização

In this paper a synthesis parameters study was conducted in order to optimize the obteinment of MCM-22 (MWW structure) and increase its accessibility, getting higher external surface and generating mesopores. Syntheses with Si / Al = 15 and Si / Al = 50 ratios were performed under static conditions at different temperatures and with seeds induction, which resulted in MCM-22 pure and crystalline (Si / Al ratio = 15) after 3 days and Si / Al = 50 after 11 days. The reduction of hexamethyleneimine content (HMI) was studied in the stirring synthesis and a HMI reduction of 47% was possible through the mother liquor reuse, in addition, a specific area of 481 m² / g has been obtained in the fourth synthesis day. Regarding the increase of accessibility of the MCM-22 zeolite skeins of MCM-22 plates with about 2 μm were obtained, through the use of dissolved silica, addition of seeds, increased temperature and synthesis time of 2 days. A significant value of specific area was found for this material, around 500 m² / g. Also with respect to the increase of MCM-22 accessibility, treatment with oxalic acid concentration of 0.5 mol / L and silanization of proto-zeolitic units resulted in the mesopores formation . Furthermore, silanization still favored reduction of 70 % in crystal size and a specific area of 566 m² / g.

Petrologia e geologia estrutural do plutão granítico Barcelona, província Borborema, NE do Brasil

The Dissertation aimed to advance the geological knowledge of the Barcelona Granitic Pluton (BGP). This body is located in the eastern portion of the Rio Grande do Norte Domain (RND), within the São José do Campestre subdomain (SJC), NE of the Borborema Province. The main goal was to understand the geological evolution of the rocks of the pluton and the tectonic setting of magma generation and its emplacement. The BGP has an assumed Ediacaran age and outcropping area of approximately 260 km2, being composed of three varied petrographic/textural facies: (a) porphyritic biotite monzogranite; (b) dykes and sheets of biotite microgranite; (c) dioritic to quartz-dioritic enclaves. The rocks of the BGP have the following structures: (i) a NE-SW and NW-SE directed magmatic fabric (Sγ), accompanied by a magmatic lineation (Lγ) with gentle dip to NE-SW and NW-SE. In the southern portion, there is the concentric pattern of this foliation with medium to high dip, and (ii) a solid state foliation, in part mylonitic (S3+), mainly on the eastern edge with slightly plunging to west. The integration of structural and gravity data permitted to interpret the emplacement of the BGP as controlled by the transcurrent shear zones systems Lajes Pintadas (LPSZ) and Sítio Novo (SNSZ), both of dextral strike-slip kinematics. Mineral chemistry data show that the amphibole form the porphyritic biotite monzogranite facies is hastingsite with moderate Mg / (Mg + Fe) ratios, indicating crystallization under moderate to high ƒO2 and cristallization pressure of around 5.0-6.0 kbar. The biotite tends to be slightly richer in annite molecule and plots in the transitional field from primary biotite to reequilibrated biotite. In discriminant diagrams of magmatic series, the biotite behave like those of subalkaline affinity, consistent with the potassium calc-alkaline / sub-alkaline geochemical affinity of the hosting rock. The opaque minerals are primarily magnetite, with some crystals martitized to hematite indicating relatively oxidizing conditions during magma evolution that originated the BGP. Zoning in plagioclase, K-feldspar and allanite crystals suggest fractional crystallization process. Lithogeochemical data suggest that the facies described for the BGP have similar magma source, usually plotting in the fields and trends of the subalkaline / high potassium calc-alkaline series.

Avaliação das atividades farmacológicas de fucoidans obtidos do extrato bruto de fucoidan comercial de Fucus vesiculosus

Fucoidan is a term used to define heteropolysaccharides that are composed of less than 90% L-fucose. The exception to this rule is the homofucoidan obtained from the seaweed Fucus vesiculosus. This fucoidan can be purchased from SIGMA Co. and have been used in various research for evaluation of their pharmacological activities. However, it is not a pure molecule. In fact, it is a mix of several fucoidan molecules. In this work, were obtained, from acetone precipitation, and biochemically characterized, four fucoidan molecules from SIGMA-ALDRICH Co. fucoidan to evaluate their anticoagulant, antioxidant, antiadipogenic, immunomodulatory and antiurolithiatic activities. In anticoagulant activity, evaluated by aPTT assay, fucoidans F0.9, F1.1 and F2.0 increased eightfold the coagulation time, compared to the control, when a mass of 10 μg was used. To PT test, only fucoidan F0.9 was capable of increase the coagulation time, compared to control. In the total antioxidant capacity assay (TAC), the fucoidan F2.0 showed 400 ascorbic acid equivalents, while fucoidan F0.5, the lest effective, 38 equivalents. In respect to the effect on pre-adipocyte cell lines (3T3-L1) adipogenesis, was observed that fucoidan F1.1 and F2.0 reduced the adipogenesis and this effect was associated to the reduction in the expression of regulatoy proteins C/EBPα, C/EBPβ and PPARγ. On the other hand, fucoidans F0.5 and F0.9 induced increased expression of these regulatory proteins. Furthermore, fucoidan F2.0 induced hydrolysis of triglycerides present in the interior of adipocytes. The immunomodulatory effect was evaluated and observed that the presence of fucoidans F0.5 , F1.1 and F2.0 significantly reduced the production of nitric oxide by activated macrophages with LPS specially fucoidan F2.0 that in 100 μg/mL, reduced about 55% the effect caused by LPS. Relative to the effect upon the formation of calcium oxalate crystals, fucoidan F0.5 was more effective in reduce the aggregation of the crystals and this effect it was not significantly different regarding the effect caused by the crude. Besides, fucoidan F0.5 only promoted the formation of COD type crystals, while fucoidans F1.1 and F2.0 did not influence the formation of crystals compared with the control. The results described in this study indicate that the commercial crude fucoidan of Fucus vesiculosus it’s a mix of several fucoidan which, in turn, have different chemical compositions besides having different pharmacological activities. The use of these fucoidans it´s indicated according the pharmacological activity to be evaluated.

Avaliação das atividades farmacológicas de fucoidans obtidos do extrato bruto de fucoidan comercial de Fucus vesiculosus

Fucoidan is a term used to define heteropolysaccharides that are composed of less than 90% L-fucose. The exception to this rule is the homofucoidan obtained from the seaweed Fucus vesiculosus. This fucoidan can be purchased from SIGMA Co. and have been used in various research for evaluation of their pharmacological activities. However, it is not a pure molecule. In fact, it is a mix of several fucoidan molecules. In this work, were obtained, from acetone precipitation, and biochemically characterized, four fucoidan molecules from SIGMA-ALDRICH Co. fucoidan to evaluate their anticoagulant, antioxidant, antiadipogenic, immunomodulatory and antiurolithiatic activities. In anticoagulant activity, evaluated by aPTT assay, fucoidans F0.9, F1.1 and F2.0 increased eightfold the coagulation time, compared to the control, when a mass of 10 μg was used. To PT test, only fucoidan F0.9 was capable of increase the coagulation time, compared to control. In the total antioxidant capacity assay (TAC), the fucoidan F2.0 showed 400 ascorbic acid equivalents, while fucoidan F0.5, the lest effective, 38 equivalents. In respect to the effect on pre-adipocyte cell lines (3T3-L1) adipogenesis, was observed that fucoidan F1.1 and F2.0 reduced the adipogenesis and this effect was associated to the reduction in the expression of regulatoy proteins C/EBPα, C/EBPβ and PPARγ. On the other hand, fucoidans F0.5 and F0.9 induced increased expression of these regulatory proteins. Furthermore, fucoidan F2.0 induced hydrolysis of triglycerides present in the interior of adipocytes. The immunomodulatory effect was evaluated and observed that the presence of fucoidans F0.5 , F1.1 and F2.0 significantly reduced the production of nitric oxide by activated macrophages with LPS specially fucoidan F2.0 that in 100 μg/mL, reduced about 55% the effect caused by LPS. Relative to the effect upon the formation of calcium oxalate crystals, fucoidan F0.5 was more effective in reduce the aggregation of the crystals and this effect it was not significantly different regarding the effect caused by the crude. Besides, fucoidan F0.5 only promoted the formation of COD type crystals, while fucoidans F1.1 and F2.0 did not influence the formation of crystals compared with the control. The results described in this study indicate that the commercial crude fucoidan of Fucus vesiculosus it’s a mix of several fucoidan which, in turn, have different chemical compositions besides having different pharmacological activities. The use of these fucoidans it´s indicated according the pharmacological activity to be evaluated.

Obtención de péptidos alimentarios mediante hidrólisis enzimática con efectos sobre la salud intestinal

En la presente Tesis Doctoral, se estudió la obtención e identificación de péptidos alimentarios mediante el uso de hidrólisis enzimática y sus efectos sobre la salud gastrointestinal. La secuenciación y cuantificación de los péptidos se realizó mediante cromatografía de líquidos de alta eficacia en fase inversa acoplada a espectrometría de masas en tándem (RP-HPLC-MS/MS). Se analizaron distintos hidrolizados y digeridos gastrointestinales de caseínas, proteínas de suero de leche y lunasina. Inicialmente, se propone la producción de caseinofosfopéptidos (CPPs) mediante la hidrólisis con tripsina de un subproducto de caseína generado durante la fabricación de un ingrediente funcional con actividad antihipertensiva. La identificación y la semi-cuantificación de CPPs revelaron algunos cambios cualitativos y cuantitativos en los CPPs generados en los hidrolizados con distintas condiciones de tiempo de hidrólisis y precipitación selectiva. Una vez realizada la identificación de CPPs en los hidrolizados trípticos, el subproducto también se sometió a un proceso de digestión gastrointestinal simulando las condiciones fisiológicas. La comparación de los péptidos resultantes mostró gran homología en las secuencias de CPPs formados por la hidrólisis con tripsina y la digestión gastrointestinal simulada. Se observó que algunas regiones de αS1-caseína, concretamente las comprendidas entre los residuos (43-59) y (60-74), de la αs1-caseína y los residuos (1-25) y (30-50) de β-caseína, fueron capaces de resistir tanto a la hidrólisis con tripsina como a la digestión gastrointestinal. Por lo tanto, se demuestra que el subproducto industrial puede ser empleado como fuente de CPPs para favorecer la absorción de minerales a nivel intestinal...

Estudo das alterações hematológicas e urinárias em cães em diferentes estágios de disfunção renal e avaliação do biomarcador cistatina C

Chapter 2 - Cystatin C is a cationic protein is not glycosylated, produced a steady state for all nucleated and present in biological fluids cells being freely filtered by the glomeruli and almost completely catabolized in the proximal tubule, it is a promising early renal dysfunction marker. This study aimed to determine and compare the serum concentration of cystatin C biomarker in 86 dogs. The animals were divided into four groups according to serum creatinine levels: G1 - up. 1.4 mg / dL (23 animals), G2 - 1.5-2.0 mg / dL (16 animals), G3 - 2.1 to 5.0 mg / dL (24 animals) and G4 - above 5.1 mg / dL (23 animals). There was the measurement of the parameters used in the clinical routine of small animals such as urea, urinary gamma glutamyl transferase, proteinuria, alkaline phosphatase, sodium, potassium, chloride, calcium, phosphorus, calcium/phosphorus ratio and cystatin C. There was no statistical difference for urea, proteinuria, phosphorus, calcium/phosphorus, potassium and cystatin C, however, the other showed no statistical difference. Based on the results we can infer that cystatin C was not a good early indicator of kidney disease in dogs. Chapter 3 - This study aimed to determine the hematological and urinalysis elements such as density, proteinuria, cylinders and pH in 86 dogs The animals were divided into four stages according to serum creatinine levels: I - up to 1.4 mg/dL (23 animals), II - 1.5-2.0 mg/dL (16 animals), III from 2.1 to 5.0 mg/dL (24 animals) and IV - above 5.1 mg/dL (23 animals). In stage III, IV there was anemia normocytic normochromic type. Stage II had a leukocytosis frame by neutrophilia with a regenerative left shift and stage III and IV detour degenerative left. The density remained within the reference values all stages. Proteinuria showed statistical significance for the classification 2+ (1.0 g/L), between stage I and II, II and IV. Only the cylinder granular statistical difference in the classification 2+ between stage II and III, and 3+ between stage I and III. The prevailing pH was acid. The haematological values compared to serum creatinine stages showed the changes in hemoglobin and packed cell volume erythrocytes become more pronounced as serum creatinine values rise , this is also the behavior of neutrophils rods and proteinuria.

Crisis of work as a social integration factor

This article analyzes the process of deterioration of the work as a source of social rights and as a social integration element. The context of this process is the passage of a wage-labour society with stable employment to other where the labour relations are deregulated. This aim was tackled by means of quantitative and qualitative techniques. Secondary sources of statistical information were used together with interviews to experts of the institutional sphere. The results of this research show the emergence of a new exclusive model of social cohesion based on intensification and generalization of social inequalities and job insecurity. In this new model of social cohesion, it is noted that the integration strategies of people have less and less support from Government and people are neglected. This process appears in the four spheres that classify the social exclusion risks factors: the structural, the institutional, the relational and the individual.

Granitos Variscos do Centro Norte de Portugal

A Cadeia Varisca Europeia, formada no final do Paleozóico, estende-se desde a Europa de Leste até à Península Ibérica e inclui extensas áreas ocupadas por rochas graníticas, representando, por isso, uma das regiões do globo em que mais se têm investigado os processos de reciclagem e acreção crustal em contexto de colisão continental. O Maciço Ibérico constitui o segmento mais ocidental do orógeno varisco europeu e uma das áreas onde a actividade plutónica está mais bem expressa e mostra uma maior diversidade tipológica. No Maciço Ibérico, em particular na Zona Centro Ibérica (ZCI), a intrusão de rochas granitóides de idade varisca está preferencialmente associada com a terceira fase de deformação (D3). De acordo com as suas relações com este evento de deformação, os granitóides da ZCI foram subdivididos em dois grandes grupos: sin-D3 e tardi-pós-D3. Em termos petrográficos e geoquímicos, os maciços graníticos sin- e tardi-pós-D3 têm sido integrados em duas séries principais: (a) a série dos granitos de duas micas e dos leucogranitos fortemente peraluminosos e (b) a série dos monzogranitos e granodioritos, metaluminosos a fracamente peraluminosos, com biotite ± anfíbola. Os granitos da primeira série apresentam uma filiação de tipo S e resultam da anatexia de materiais supracrustais durante o clímax de metamorfismo regional, enquanto.os granitóides da segunda série exibem características transicionais I-S e têm sido interpretados, quer como produtos da hibridização de magmas félsicos crustais com magmas básicos de proveniência mantélica, quer como resultantes da anatexia de protólitos metaígneos da crosta inferior. O trabalho realizado no batólito das Beiras revela que o clímax de metamorfismo regional foi atingido neste sector durante um evento extensional (D2), que foi acompanhado por intensa migmatização. No ínício da D3, o volume de fundidos crustais já seria suficientemente grande (ca. 15-35%) para que pudesse ocorrer a sua separação do resíduo sólido. Assim, durante a tectónica transcorrente D3, dá-se a ascenção, diferenciação e consolidação de abundantes quantidades de magmas graníticos, fortemente peraluminosos e isotopicamente evoluídos (tipo-S), que vêm a originar enormes batólitos de leucogranitos de duas micas, com idades entre 317-312 Ma. No final da D3, com a progressiva substituição do manto litosférico pela astenosfera, mais quente, diminui a densidade da coluna litosférica e ocorre o levantamento isostático e exumação da crusta. A fusão por descompressão da astenosfera gera líquidos básicos que hibridizam com os fundidos félsicos crustais, em proporções variáveis, e produzem magmas metaluminosos a ligeiramente peraluminosos, de afinidade calco-alcalina. A ascenção destes magmas terá tido lugar nos últimos estádios da deformação transcorrente e a sua instalação no nível crustal final ocorre após a D3, dando origem aos inúmeros maciços compósitos de granitóides biotíticos híbridos tardi-pós-cinemáticos, presentes no batólito das Beiras. Os dados de campo mostram que estes granitóides são intrusivos nos plutões sin-D3, cortam as estruturas regionais e provocam metamorfismo de contacto nas sequências do Carbónico Superior. Com base nas idades U-Pb obtidas em zircões e monazites, é possível datar este importante período de plutonismo granítico com 306-294 Ma. A assinatura geoquímica e isotópica dos granitóides híbridos tardi-pós-D3 revela que, para além da mistura de componentes com proveniência distinta (manto empobrecido e crusta continental), a sua evolução foi, em grande parte, controlada por processos de cristalização fraccionada (modelo AFC).

Desenvolvimento de sensores químicos para aniões

O objectivo deste trabalho foi o desenvolvimento de sensores químicos para aniões em solução aquosa. Os sensores basearam-se em cristais piezoelétricos de quartzo revestidos com macrociclos pirrólicos. Sensores com porfirinas, hexafirinas, ftalocianinas e uma rede metalo-orgânica como filmes de reconhecimento foram avaliados no que respeita à reversibilidade, sensibilidade, seletividade e tempo de vida. A sensibilidade aos aniões presentes nas águas minerais destinadas ao consumo humano dos sensores com macrociclos pirrólicos dependia dos grupos substituintes na periferia do macrociclo. A presença de grupos substituintes NH potenciou a sensibilidade, sendo o valor mais elevado obtido com o grupo NH-tosilo. Técnicas espectroscópicas permitiram mostrar que a principal interação entre o anião e o composto se fazia por meio de pontes de hidrogénio entre o anião e o grupo NH. A sensibilidade destes compostos dependia ainda da quantidade do composto depositado sobre o cristal. Nenhum dos sensores era específico, mas apresentavam variações na seletividade com o composto pirrólico sobre o cristal. O sensor com uma membrana polimérica que incorporou uma rede metalo-orgânica construída com moléculas de uma ftalocianina de magnésio com grupos NH-tosilo ligados por iões cobre apresentou coeficientes de seletividade muito diferentes de todos os restantes sensores. Uma língua eletrónica construída com três dos novos sensores foi capaz de determinar simultaneamente as concentrações dos iões HCO3-, Cl- e SO42- em amostras de água mineral engarrafada, não tendo os valores obtidos sido estatisticamente diferentes (α=0,05) daqueles que foram obtidos por cromatografia iónica ou volumetria.

Registro de hologramas a partir de objetos planos generados en un LCD

En los últimos años se ha dado un resurgimiento en el desarrollo de técnicas y dispositivos para generar imágenes 3D, algunos fundamentados en la estereoscopía y otros en la holografía -- La estereoscopía holográfica, surge como una propuesta híbrida que aprovechando las ventajas de cada una de ellas, permite registrar conjuntos de pares estereoscópicos de manera holográfica que reconstruyen imágenes 3D con características superiores a los estereogramas convencionales y soluciona algunas de las dificultades inherentes a la holografía -- En este trabajo se hace una propuesta de un sistema óptico alternativo en el que se utiliza un monitor LCD convencional como sistema de proyección, con el fin de generar las condiciones experimentales necesarias que posibiliten el registro de hologramas y la obtención de estereogramas holográficos bajo diferentes configuraciones -- Se evaluaron las condiciones de polarización y del elemento difusor del sistema, para mejorar su desempeño en el registro de hologramas de transmisión de objetos planos proyectados a partir de un LCD -- A partir de estos resultados, se posibilitó la obtención de matrices que permitieron el registro de hologramas de reflexión plano-imagen y estereogramas holográficos para los cuales se generaron las condiciones experimentales necesarias