915 resultados para power of sale


Relevância:

90.00% 90.00%

Publicador:

Resumo:

We study cooperating distributed systems (CD-systems) of restarting automata that are very restricted: they are deterministic, they cannot rewrite, but only delete symbols, they restart immediately after performing a delete operation, they are stateless, and they have a read/write window of size 1 only, that is, these are stateless deterministic R(1)-automata. We study the expressive power of these systems by relating the class of languages that they accept by mode =1 computations to other well-studied language classes, showing in particular that this class only contains semi-linear languages, and that it includes all rational trace languages. In addition, we investigate the closure and non-closure properties of this class of languages and some of its algorithmic properties.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

High-speed semiconductor lasers are an integral part in the implemen- tation of high-bit-rate optical communications systems. They are com- pact, rugged, reliable, long-lived, and relatively inexpensive sources of coherent light. Due to the very low attenuation window that exists in the silica based optical fiber at 1.55 μm and the zero dispersion point at 1.3 μm, they have become the mainstay of optical fiber com- munication systems. For the fabrication of lasers with gratings such as, distributed bragg reflector or distributed feedback lasers, etching is the most critical step. Etching defines the lateral dimmensions of the structure which determines the performance of optoelectronic devices. In this thesis studies and experiments were carried out about the exist- ing etching processes for InP and a novel dry etching process was de- veloped. The newly developed process was based on Cl2/CH4/H2/Ar chemistry and resulted in very smooth surfaces and vertical side walls. With this process the grating definition was significantly improved as compared to other technological developments in the respective field. A surface defined grating definition approach is used in this thesis work which does not require any re-growth steps and makes the whole fabrication process simpler and cost effective. Moreover, this grating fabrication process is fully compatible with nano-imprint lithography and can be used for high throughput low-cost manufacturing. With usual etching techniques reported before it is not possible to etch very deep because of aspect ratio dependent etching phenomenon where with increasing etch depth the etch rate slows down resulting in non-vertical side walls and footing effects. Although with our de- veloped process quite vertical side walls were achieved but footing was still a problem. To overcome the challenges related to grating defini- tion and deep etching, a completely new three step gas chopping dry etching process was developed. This was the very first time that a time multiplexed etching process for an InP based material system was demonstrated. The developed gas chopping process showed extra ordinary results including high mask selectivity of 15, moderate etch- ing rate, very vertical side walls and a record high aspect ratio of 41. Both the developed etching processes are completely compatible with nano imprint lithography and can be used for low-cost high-throughput fabrication. A large number of broad area laser, ridge waveguide laser, distributed feedback laser, distributed bragg reflector laser and coupled cavity in- jection grating lasers were fabricated using the developed one step etch- ing process. Very extensive characterization was done to optimize all the important design and fabrication parameters. The devices devel- oped have shown excellent performance with a very high side mode suppression ratio of more than 52 dB, an output power of 17 mW per facet, high efficiency of 0.15 W/A, stable operation over temperature and injected currents and a threshold current as low as 30 mA for almost 1 mm long device. A record high modulation bandwidth of 15 GHz with electron-photon resonance and open eye diagrams for 10 Gbps data transmission were also shown.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

In der vorliegenden Dissertation werden Systeme von parallel arbeitenden und miteinander kommunizierenden Restart-Automaten (engl.: systems of parallel communicating restarting automata; abgekürzt PCRA-Systeme) vorgestellt und untersucht. Dabei werden zwei bekannte Konzepte aus den Bereichen Formale Sprachen und Automatentheorie miteinander vescrknüpft: das Modell der Restart-Automaten und die sogenannten PC-Systeme (systems of parallel communicating components). Ein PCRA-System besteht aus endlich vielen Restart-Automaten, welche einerseits parallel und unabhängig voneinander lokale Berechnungen durchführen und andererseits miteinander kommunizieren dürfen. Die Kommunikation erfolgt dabei durch ein festgelegtes Kommunikationsprotokoll, das mithilfe von speziellen Kommunikationszuständen realisiert wird. Ein wesentliches Merkmal hinsichtlich der Kommunikationsstruktur in Systemen von miteinander kooperierenden Komponenten ist, ob die Kommunikation zentralisiert oder nichtzentralisiert erfolgt. Während in einer nichtzentralisierten Kommunikationsstruktur jede Komponente mit jeder anderen Komponente kommunizieren darf, findet jegliche Kommunikation innerhalb einer zentralisierten Kommunikationsstruktur ausschließlich mit einer ausgewählten Master-Komponente statt. Eines der wichtigsten Resultate dieser Arbeit zeigt, dass zentralisierte Systeme und nichtzentralisierte Systeme die gleiche Berechnungsstärke besitzen (das ist im Allgemeinen bei PC-Systemen nicht so). Darüber hinaus bewirkt auch die Verwendung von Multicast- oder Broadcast-Kommunikationsansätzen neben Punkt-zu-Punkt-Kommunikationen keine Erhöhung der Berechnungsstärke. Desweiteren wird die Ausdrucksstärke von PCRA-Systemen untersucht und mit der von PC-Systemen von endlichen Automaten und mit der von Mehrkopfautomaten verglichen. PC-Systeme von endlichen Automaten besitzen bekanntermaßen die gleiche Ausdrucksstärke wie Einwegmehrkopfautomaten und bilden eine untere Schranke für die Ausdrucksstärke von PCRA-Systemen mit Einwegkomponenten. Tatsächlich sind PCRA-Systeme auch dann stärker als PC-Systeme von endlichen Automaten, wenn die Komponenten für sich genommen die gleiche Ausdrucksstärke besitzen, also die regulären Sprachen charakterisieren. Für PCRA-Systeme mit Zweiwegekomponenten werden als untere Schranke die Sprachklassen der Zweiwegemehrkopfautomaten im deterministischen und im nichtdeterministischen Fall gezeigt, welche wiederum den bekannten Komplexitätsklassen L (deterministisch logarithmischer Platz) und NL (nichtdeterministisch logarithmischer Platz) entsprechen. Als obere Schranke wird die Klasse der kontextsensitiven Sprachen gezeigt. Außerdem werden Erweiterungen von Restart-Automaten betrachtet (nonforgetting-Eigenschaft, shrinking-Eigenschaft), welche bei einzelnen Komponenten eine Erhöhung der Berechnungsstärke bewirken, in Systemen jedoch deren Stärke nicht erhöhen. Die von PCRA-Systemen charakterisierten Sprachklassen sind unter diversen Sprachoperationen abgeschlossen und einige Sprachklassen sind sogar abstrakte Sprachfamilien (sogenannte AFL's). Abschließend werden für PCRA-Systeme spezifische Probleme auf ihre Entscheidbarkeit hin untersucht. Es wird gezeigt, dass Leerheit, Universalität, Inklusion, Gleichheit und Endlichkeit bereits für Systeme mit zwei Restart-Automaten des schwächsten Typs nicht semientscheidbar sind. Für das Wortproblem wird gezeigt, dass es im deterministischen Fall in quadratischer Zeit und im nichtdeterministischen Fall in exponentieller Zeit entscheidbar ist.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

We investigate the effect of the epitaxial structure and the acceptor doping profile on the efficiency droop in InGaN/GaN LEDs by the physics based simulation of experimental internal quantum efficiency (IQE) characteristics. The device geometry is an integral part of our simulation approach. We demonstrate that even for single quantum well LEDs the droop depends critically on the acceptor doping profile. The Auger recombination was found to increase stronger than with the third power of the carrier density and has been found to dominate the droop in the roll over zone of the IQE. The fitted Auger coefficients are in the range of the values predicted by atomistic simulations.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Almost everyone sketches. People use sketches day in and day out in many different and heterogeneous fields, to share their thoughts and clarify ambiguous interpretations, for example. The media used to sketch varies from analog tools like flipcharts to digital tools like smartboards. Whereas analog tools are usually affected by insufficient editing capabilities like cut/copy/paste, digital tools greatly support these scenarios. Digital tools can be grouped into informal and formal tools. Informal tools can be understood as simple drawing environments, whereas formal tools offer sophisticated support to create, optimize and validate diagrams of a certain application domain. Most digital formal tools force users to stick to a concrete syntax and editing workflow, limiting the user’s creativity. For that reason, a lot of people first sketch their ideas using the flexibility of analog or digital informal tools. Subsequently, the sketch is "portrayed" in an appropriate digital formal tool. This work presents Scribble, a highly configurable and extensible sketching framework which allows to dynamically inject sketching features into existing graphical diagram editors, based on Eclipse GEF. This allows to combine the flexibility of informal tools with the power of formal tools without any effort. No additional code is required to augment a GEF editor with sophisticated sketching features. Scribble recognizes drawn elements as well as handwritten text and automatically generates the corresponding domain elements. A local training data library is created dynamically by incrementally learning shapes, drawn by the user. Training data can be shared with others using the WebScribble web application which has been created as part of this work.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Freehand sketching is both a natural and crucial part of design, yet is unsupported by current design automation software. We are working to combine the flexibility and ease of use of paper and pencil with the processing power of a computer to produce a design environment that feels as natural as paper, yet is considerably smarter. One of the most basic steps in accomplishing this is converting the original digitized pen strokes in the sketch into the intended geometric objects using feature point detection and approximation. We demonstrate how multiple sources of information can be combined for feature detection in strokes and apply this technique using two approaches to signal processing, one using simple average based thresholding and a second using scale space.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Caches are known to consume up to half of all system power in embedded processors. Co-optimizing performance and power of the cache subsystems is therefore an important step in the design of embedded systems, especially those employing application specific instruction processors. In this project, we propose an analytical cache model that succinctly captures the miss performance of an application over the entire cache parameter space. Unlike exhaustive trace driven simulation, our model requires that the program be simulated once so that a few key characteristics can be obtained. Using these application-dependent characteristics, the model can span the entire cache parameter space consisting of cache sizes, associativity and cache block sizes. In our unified model, we are able to cater for direct-mapped, set and fully associative instruction, data and unified caches. Validation against full trace-driven simulations shows that our model has a high degree of fidelity. Finally, we show how the model can be coupled with a power model for caches such that one can very quickly decide on pareto-optimal performance-power design points for rapid design space exploration.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

We present the results of GaInNAs/GaAs quantum dot structures with GaAsN barrier layers grown by solid source molecular beam epitaxy. Extension of the emission wavelength of GaInNAs quantum dots by ~170nm was observed in samples with GaAsN barriers in place of GaAs. However, optimization of the GaAsN barrier layer thickness is necessary to avoid degradation in luminescence intensity and structural property of the GaInNAs dots. Lasers with GaInNAs quantum dots as active layer were fabricated and room-temperature continuous-wave lasing was observed for the first time. Lasing occurs via the ground state at ~1.2μm, with threshold current density of 2.1kA/cm[superscript 2] and maximum output power of 16mW. These results are significantly better than previously reported values for this quantum-dot system.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Synechocystis PCC 6803 is a photosynthetic bacterium that has the potential to make bioproducts from carbon dioxide and light. Biochemical production from photosynthetic organisms is attractive because it replaces the typical bioprocessing steps of crop growth, milling, and fermentation, with a one-step photosynthetic process. However, low yields and slow growth rates limit the economic potential of such endeavors. Rational metabolic engineering methods are hindered by limited cellular knowledge and inadequate models of Synechocystis. Instead, inverse metabolic engineering, a scheme based on combinatorial gene searches which does not require detailed cellular models, but can exploit sequence data and existing molecular biological techniques, was used to find genes that (1) improve the production of the biopolymer poly-3-hydroxybutyrate (PHB) and (2) increase the growth rate. A fluorescence activated cell sorting assay was developed to screen for high PHB producing clones. Separately, serial sub-culturing was used to select clones that improve growth rate. Novel gene knock-outs were identified that increase PHB production and others that increase the specific growth rate. These improvements make this system more attractive for industrial use and demonstrate the power of inverse metabolic engineering to identify novel phenotype-associated genes in poorly understood systems.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Las relaciones comerciales entre países del mundo han venido aumentando recientemente, mejorando a través de tratados y acuerdos, entre estos países. China ha sido una potencia económica fuerte en sus relaciones comerciales y de negocios establecidos con países del mundo. En lo que a Colombia se refiere, se han venido planteando posibles negociaciones para el logro de acuerdos en un futuro cercano que permitan un intercambio libre de productos y servicios. Aprovechando las relaciones entre estos países surge la idea de un negocio para la importación de un producto chino novedoso orientado al sector de belleza en Colombia. Este producto es un aparato electrotérmico inalámbrico, el cual aun no existe en el mercado colombiano, razón por la cual podría tener una muy buena aceptación por parte de la mujer colombiana, pues es un producto que le permitirá ahorrar tiempo y eliminar la dependencia al uso de una toma corriente para utilizar este aparato electrotérmico. Para evaluar la factibilidad de negocio, se realizo un estudio de mercado del cual se obtuvieron buenos resultados, pues un porcentaje alto aceptaron que comprarían este producto al precio que esta dentro del rango del precio de venta en Colombia. Se estudiaron también las inversiones necesarias para iniciar el negocio y los costos de funcionamiento de este. Se realizo una proyección a cinco años del funcionamiento del negocio, y los resultados de este fueron que la empresa siempre tendrá liquidez para solventarse en el transcurso de estos cinco años. Para realizar la inversión inicial del negocio se requiere capital de los socios y obtención de un crédito por parte de estos. Un crédito que será pagado en su totalidad en el tercer año. Se realizo el cálculo del costo de venta del producto para determinar su precio final el cual, no resultó mayor al promedio de los aparatos electrotérmicos actuales del mercado con el valor agregado que el producto que se pretende importar es inalámbrico. Lo anterior es una ventaja del producto del mercado, junto con la garantía y calidad que se pretende tener en este producto. Dado que el negocio el viable, según lo descrito anteriormente, se investigaron los papeles y costos necesarios en cámara y comercio para la constitución de una empresa.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

My aim in this paper is to propose a reflection on the position and the importance that the constitutional judge has in the legal systems of contemporary constitutionalism. The figure of the judge responsible of protecting the Constitution is a key institution, without which we cannot understand the laws of constitutional democracies, their current lines of development, and the guarantee of rights and freedoms that constitute the normative core of these systems. Moreover, the reflection on the exercise of the powers of the judge, its scope and its justification is an important part of contemporary legal discussion, still relevant, albeit not exclusively - in the field of legal philosophy. The object of attention of my reflection is the judge who has the power of judicial review, in a scheme of defense of the Constitution, regardless the specific ways of this defense.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Esta investigación se va a enfocar principalmente en el comportamiento del consumidor final con relación a la compra de una marca propia. Estas han tenido un gran crecimiento en el país lo cual ha creado una nueva tendencia de compra para los consumidores colombianos. Según un estudio de “El poder de las marcas privadas” se establece que Colombia se cataloga como uno de los 10 países con un crecimiento más rápido a nivel mundial. Aunque, el mercado de marcas privadas esté en crecimiento, existen diversos factores como los ingresos de los individuos, el riesgo percibido y la calidad percibida del producto que influyen drásticamente en la elección de estas marcas con respecto a las reconocidas. El problema que se va a desarrollar en la presente investigación es conocer detalladamente cuál es el impacto que tienen las marcas propias de acuerdo con los ingresos de los individuos la percepción de riesgo y calidad que tiene el consumidor final a la hora de tomar la decisión de comprar una marca propia a una marca reconocida de productos alimenticios en la cadena minorista Éxito en la ciudad de Bogotá – Colombia? Esta investigación busca, mediante la aplicación de la teoría y los conceptos básicos del comportamiento del consumidor encontrar explicaciones y soluciones para las cadenas minoristas que fabrican marcas propias, ofreciéndoles sugerencias para que sus estrategias de mercadeo en la venta de marcas propias sean exitosas y aceptadas por el consumidor final y el mercado.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Mint es una repostería especializada para personas con problemas como diabetes y obesidad, que estará ubicada en localidades de Bogotá, donde existen mayores índices de este problema, inicialmente estaremos en Kennedy, una localidad con mayor población que padece la diabetes y obesidad en niños y adultos mayores. Mint busca cambiar el concepto de comida saludable o especializada en diabéticos, de aburrida, de mal sabor y poco agradable al consumo, por gran variedad de sabores, texturas y diseños. Este concepto se cambiará principalmente, a través del diseño de los productos, así como la decoración de la tienda, dado que estamos ubicados en estratos 2, 3 y 4, nuestros productos estarán condicionados al poder adquisitivo de nuestros consumidores. El local tendrá un área total de 87,4 m cuadrado, donde predomina el color y el diseño, funcionará de domingo a domingo en un horario de 10 am a 8 pm. La idea no solo es la venta de productos, sino realizar una concientización del cliente de lo más importante, su salud. La inversión estimada en maquinaria será de 6.510.000, equipo de 3.200.000 y los muebles enseres de 6.500.000, adicional, los costos operacionales mensuales estimados son de 15.473.400, donde el punto de equilibrio se logrará en el momento de venta de 467. 465.004. El local proporcionará diferentes campañas de fidelización, tales como promociones y descuentos, así como la posibilidad de pedir domicilios a través de internet.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Why do some civil wars terminate soon, with victory of one party over the other? What determines if the winner is the incumbent or the rebel group? Why do other conáicts last longer? We propose a simple model in which the power of each armed group depends on the number of combatants it is able to recruit. This is in turn a function of the relative ëdistanceíbetween group leaderships and potential recruits. We emphasize the moral hazard problem of recruitment: Öghting is costly and risky so combatants have the incentive to defect from their task. They can also desert altogether and join the enemy. This incentive is stronger the farther away the Öghter is from the principal, since monitoring becomes increasingly costly. Bigger armies have more power but less monitoring capacity to prevent defection and desertion. This general framework allows a variety of interpretations of what type of proximity matters for building strong cohesive armies ranging from ethnic distance to geographic dispersion. Di§erent assumptions about the distribution of potential Öghters along the relevant dimension of conáict lead to di§erent equilibria. We characterize these, discuss the implied outcome in terms of who wins the war, and illustrate with historical and contemporaneous case studies.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Previous research has shown that often there is clear inertia in individual decision making---that is, a tendency for decision makers to choose a status quo option. I conduct a laboratory experiment to investigate two potential determinants of inertia in uncertain environments: (i) regret aversion and (ii) ambiguity-driven indecisiveness. I use a between-subjects design with varying conditions to identify the effects of these two mechanisms on choice behavior. In each condition, participants choose between two simple real gambles, one of which is the status quo option. I find that inertia is quite large and that both mechanisms are equally important.