Drop Size Measurements in a Laboratory Scale Venturi Scrubber

Venturi scrubbers are high efficiency gas cleaners in which suspended particles are removed from gas streams by droplets formed by liquid atomisation, usually in the venturi throat. The size of the droplets formed is of fundamental importance to the performance of the equipment, both in terms of pressure drop and collection efficiency. In this study, drop sizes in a cylindrical laboratory scale venturi scrubber were measured using a laser diffraction technique. Gas velocity and liquid to gas ratios varied from 50 to 90 m/s and 0.5 to 2.0 l/m3, respectively. Water was inserted as perpendicular jets at the beginning of the throat. Measurements were performed at three positions: two located along the throat, and the last one at the end of the diffuser. The data presented here are a typical example of pneumatic atomisation and can be relevant to other industrial applications such as combustion and engine technology. Finally, results are compared to available correlations and the validity of these equations is discussed.

The Influence of Network Competence on Internationalization of SMEs

This study focuses on the relationship between organizational network competence and the internationalization process of small- and medium sized enterprises (SMEs). Over recent decades, the global business environment has become increasingly conducive to internationalization of small firms. A central facilitating factor in the process has been the emergence of networked business relationships between internationalizing firms. Research on SME internationalization has found that certain types of structures and dynamics of business networks allow SMEs access to the resources they need to enter foreign markets. This consequently means that their internationalization often becomes to depend on the networks they are embedded in. However, research so far has mostly ignored the possibility that the organizational ability to develop and manage business network relationships, network competence, may be a major underlying factor in determining how well SMEs can leverage their network relationships to enter foreign markets and consequently may determine in large part how successful their internationalization process turns out to be. This study aims to respond to those gaps, by empirically examining how the development of network competence in internationalizing SMEs influences the internationalization outcomes that they can expect, and how such network competence is conceptualized and developed. Using a mixed methods approach, survey data collected from 298 Finnish SMEs across five industry sectors is first used to examine how levels of network competence are related to internationalization propensity of SMEs and their subsequent international performance, growth and profitability as internationally operating firms. In order to illustrate in more detail the ways in which network competence is conceptualized and how it develops during the internationalization process of an SME, qualitative data from internationally operating Finnish SMEs are used. Longitudinal interview data of an internationalizing Finnish SME is accompanied by data gathered through a series of semistructured interviews of Finnish and Russian managers involved in mutual business relationship dyads. Structurally, this thesis examines the research issue as an article-based dissertation, consisting of five journal and conference publications. Three of these publications are based on the quantitative data, and the remaining two apply the qualitative interview data. The results find several aspects where network competence has a positive influence on the success of internationalizing SMEs, how it develops and what it entails conceptually in this context. Quantitatively, the level of network competence is found to have a positive relationship to various internationalization outcomes, including the propensity of SMEs to enter foreign markets and on their subsequent international performance, their growth and their profitability. Additionally, the positive relationship is divided between the relationship-specific and cross-relational dimension of network competence, in that the influence of the former is relevant for the propensity to internationalize, while the latter is for the growth and profitability of the already internationalized SMEs. Qualitatively, the results suggest, firstly, that the development process of network competence does not necessarily precede the start of the internationalization process, but may occur through a gradual learning process alongside it. And secondly, the results also imply that the conceptualization of network competence by Finnish managers of internationally operating Finnish SMEs is structurally distinct from that of their culturally distinct partner managers in Russia. This study contributes to the literature on SME internationalization in several ways. Firstly, it introduces operationalized organizational competencies to the literature on internationalization of SMEs, which has so far mainly examined the influence of business networking on the internationalization process without having such an organizational viewpoint. Furthermore, this study provides a multi-level analysis of the determinants of successful SME internationalization, by examining various strategic and performance outcomes across the process. These results also contribute to the literature on organizational strategy of internationalizing SMEs, by clarifying how different dimensions of business networking may be optimal in different phases of the internationalization process. Conceptually, the results of this study contribute to the literature on competence development and SME internationalization, by illustrating how the development process of network competence may occur during internationalization process. Thus, they also contribute to the discussion on how SMEs are able to influence the dynamics and structures of their business networks over time. Finally, this study contributes to the literature on the role of culture in the internationalization process, by implying that the cultural background of the manager of the SME may determine whether business networking and network competence is seen as an organizational-level or an individual level capability. The study also includes some additional contributions to the literature on dynamic capabilities in strategic management, and on that of strategic business networks. These include further clarifying the exact nature and tangibility of dynamic capabilities, and being one of the first studies to introduce constructs from both dynamic capabilities and business network literature to the field of international entrepreneurship. And finally, the study also has some contribution on the two streams of literature, in illustrating how both dyadic and network-level capabilities may be relevant, depending on the current strategic goals and market position of the firm. Keywords: network competence, internationalizatio

Hydrometallurgical recovery of valuable metals from secondary raw materials

Wastes and side streams in the mining industry and different anthropogenic wastes often contain valuable metals in such concentrations their recovery may be economically viable. These raw materials are collectively called secondary raw materials. The recovery of metals from these materials is also environmentally favorable, since many of the metals, for example heavy metals, are hazardous to the environment. This has been noticed in legislative bodies, and strict regulations for handling both mining and anthropogenic wastes have been developed, mainly in the last decade. In the mining and metallurgy industry, important secondary raw materials include, for example, steelmaking dusts (recoverable metals e.g. Zn and Mo), zinc plant residues (Ag, Au, Ga, Ge, In) and waste slurry from Bayer process alumina production (Ga, REE, Ti, V). From anthropogenic wastes, waste electrical and electronic equipment (WEEE), among them LCD screens and fluorescent lamps, are clearly the most important from a metals recovery point of view. Metals that are commonly recovered from WEEE include, for example, Ag, Au, Cu, Pd and Pt. In LCD screens indium, and in fluorescent lamps, REEs, are possible target metals. Hydrometallurgical processing routes are highly suitable for the treatment of complex and/or low grade raw materials, as secondary raw materials often are. These solid or liquid raw materials often contain large amounts of base metals, for example. Thus, in order to recover valuable metals, with small concentrations, highly selective separation methods, such as hydrometallurgical routes, are needed. In addition, hydrometallurgical processes are also seen as more environmental friendly, and they have lower energy consumption, when compared to pyrometallurgical processes. In this thesis, solvent extraction and ion exchange are the most important hydrometallurgical separation methods studied. Solvent extraction is a mainstream unit operation in the metallurgical industry for all kinds of metals, but for ion exchange, practical applications are not as widespread. However, ion exchange is known to be particularly suitable for dilute feed solutions and complex separation tasks, which makes it a viable option, especially for processing secondary raw materials. Recovering valuable metals was studied with five different raw materials, which included liquid and solid side streams from metallurgical industries and WEEE. Recovery of high purity (99.7%) In, from LCD screens, was achieved by leaching with H2SO4, extracting In and Sn to D2EHPA, and selectively stripping In to HCl. In was also concentrated in the solvent extraction stage from 44 mg/L to 6.5 g/L. Ge was recovered as a side product from two different base metal process liquors with Nmethylglucamine functional chelating ion exchange resin (IRA-743). Based on equilibrium and dynamic modeling, a mechanism for this moderately complex adsorption process was suggested. Eu and Y were leached with high yields (91 and 83%) by 2 M H2SO4 from a fluorescent lamp precipitate of waste treatment plant. The waste also contained significant amounts of other REEs such as Gd and Tb, but these were not leached with common mineral acids in ambient conditions. Zn was selectively leached over Fe from steelmaking dusts with a controlled acidic leaching method, in which the pH did not go below, but was held close as possible to, 3. Mo was also present in the other studied dust, and was leached with pure water more effectively than with the acidic methods. Good yield and selectivity in the solvent extraction of Zn was achieved by D2EHPA. However, Fe needs to be eliminated in advance, either by the controlled leaching method or, for example, by precipitation. 100% Pure Mo/Cr product was achieved with quaternary ammonium salt (Aliquat 336) directly from the water leachate, without pH adjustment (pH 13.7). A Mo/Cr mixture was also obtained from H2SO4 leachates with hydroxyoxime LIX 84-I and trioctylamine (TOA), but the purities were 70% at most. However with Aliquat 336, again an over 99% pure mixture was obtained. High selectivity for Mo over Cr was not achieved with any of the studied reagents. Ag-NaCl solution was purified from divalent impurity metals by aminomethylphosphonium functional Lewatit TP-260 ion exchange resin. A novel preconditioning method, named controlled partial neutralization, with conjugate bases of weak organic acids, was used to control the pH in the column to avoid capacity losses or precipitations. Counter-current SMB was shown to be a better process configuration than either batch column operation or the cross-current operation conventionally used in the metallurgical industry. The raw materials used in this thesis were also evaluated from an economic point of view, and the precipitate from a waste fluorescent lamp treatment process was clearly shown to be the most promising.

Building organizational creativity – a multitheory and multilevel approach for understanding and stimulating organizational creativity

Organizational creativity is increasingly important for organizations aiming to survive and thrive in complex and unexpectedly changing environments. It is precondition of innovation and a driver of an organization’s performance success. Whereas innovation research increasingly promotes high-involvement and participatory innovation, the models of organizational creativity are still mainly based on an individual-creativity view. Likewise, the definitions of organizational creativity and innovation are somewhat equal, and they are used as interchangeable constructs, while on the other hand they are seen as different constructs. Creativity is seen as generation of novel and useful ideas, whereas innovation is seen as the implementation of these ideas. The research streams of innovation and organizational creativity seem to be advancing somewhat separately, although together they could provide many synergy advantages. Thereby, this study addresses three main research gaps. First, as the knowledge and knowing is being increasingly expertized and distributed in organizations, the conceptualization of organizational creativity needs to face that perspective, rather than relying on the individual-creativity view. Thus, the conceptualization of organizational creativity needs clarification, especially as an organizational-level phenomenon (i.e., creativity by an organization). Second, approaches to consciously build organizational creativity to increase the capacity of an organization to demonstrate novelty in its knowledgeable actions are rare. The current creativity techniques are mainly based on individual-creativity views, and they mainly focus on the occasional problem-solving cases among a limited number of individuals, whereas, the development of collective creativity and creativity by the organization lacks approaches. Third, in terms of organizational creativity as a collective phenomenon, the engagement, contributions, and participation of organizational members into activities of common meaning creation are more important than the individualcreativity skills. Therefore, the development approaches to foster creativity as social, emerging, embodied, and collective creativity are needed to complement the current creativity techniques. To address these gaps, the study takes a multiparadigm perspective to face the following three objectives. The first objective of this study is to clarify and extend the conceptualization of organizational creativity. The second is to study the development of organizational creativity. The third is to explore how an improvisational theater based approach fosters organizational creativity. The study consists of two parts comprising the introductory part (part I) and six publications (part II). Each publication addresses the research questions of the thesis through detailed subquestions. The study makes three main contributions to the research of organizational creativity. First, it contributes toward the conceptualization of organizational creativity by extending the current view of organizational creativity. This study views organizational creativity as a multilevel construct constituting both of individual and collective (group and organizational) creativity. In contrast to current views of organizational creativity, this study bases on organizational (collective) knowledge that is based on and demonstrated through the knowledgeable actions of an organization as a whole. The study defines organizational creativity as an overall ability of an organization to demonstrate novelty in its knowledgeable actions (through what it does and how it does what it does).Second, this study contributes toward the development of organizational creativity as multi-level phenomena, introducing developmental approaches that face two or more of these levels simultaneously. More specifically, the study presents the cross-level approaches to building organizational creativity, by using an approach based in improvisational theater and considering assessment of organizational renewal capability. Third, the study contributes on development of organizational creativity using an improvisational theater based approach as twofold meaning. First, it fosters individual and collective creativity simultaneously and builds space for creativity to occur. Second, it models collective and distributed creativity processes, thereby, contributing to the conceptualization of organizational creativity.

Kuljetusvirtojen yhdistely kannattavaksi kuljetussuoritteeksi maatalouteen liittyvissä tuoteryhmissä

Diplomityön tavoitteena on arvioida kuljetusvirtojen yhdistämisen kannattavuutta. Kannattavuuden arvioimiseksi määritetään kuljetusvirtojen yhdistämisestä syntyneiden kuljetusreittien hinnat, jotka perustuvat reitillä käytettävien ajoneuvojen kuljetuskustannuksiin. Työssä kuvataan reitin hinnan määrittämiseksi rakennetun hinnoittelutyökalun ominaisuuksia ja käyttöä. Kova kilpailu ja huomattava kuljetuskustannusten osuus kaikista logistiikkakustannuksista haastavat yritykset kehittämään toimituspalveluistaan yhä tehokkaampia. Jotta niin asiakkaiden, toimittajien kuin kuljetusyritystenkin tarpeet voidaan mahdollisimman hyvin huomioida, on ensisijaisesti tarkasteltava yrityksen omaa toimintaa ja sen kehittymisvalmiuksia kuljetusten hallinnassa. Kuljetuskustannusten muodostumisen havainnollistamiseksi työssä perehdytään raskaan kuljetuskaluston kustannuslaskelmiin eri tekijöineen. Perusteluja kuljetusten yhdistämisen kannattavuudelle haetaan yritysmaailmassa jo toteutetuista esimerkeistä ja kuljetusten yhdistämisen rajoituksista. Kuljetusvirtojen yhdistelyn avulla yrityksen on mahdollista tehostaa logistisia palveluitaan kuljetusten osalta. Taulukkolaskentapohjainen työkalu auttaa tyhjänä ajettavien reittiosuuksien minimoinnissa. Tyhjänä ajon vähentymisen vaikutus näkyy kuljetuskustannusten alenemisena, jonka hyötyjä voidaan pitkällä aikavälillä jakaa useamman sidosryhmän kesken.

Video transcoding in a distributed cloud computing environment

Video transcoding refers to the process of converting a digital video from one format into another format. It is a compute-intensive operation. Therefore, transcoding of a large number of simultaneous video streams requires a large amount of computing resources. Moreover, to handle di erent load conditions in a cost-e cient manner, the video transcoding service should be dynamically scalable. Infrastructure as a Service Clouds currently offer computing resources, such as virtual machines, under the pay-per-use business model. Thus the IaaS Clouds can be leveraged to provide a coste cient, dynamically scalable video transcoding service. To use computing resources e ciently in a cloud computing environment, cost-e cient virtual machine provisioning is required to avoid overutilization and under-utilization of virtual machines. This thesis presents proactive virtual machine resource allocation and de-allocation algorithms for video transcoding in cloud computing. Since users' requests for videos may change at di erent times, a check is required to see if the current computing resources are adequate for the video requests. Therefore, the work on admission control is also provided. In addition to admission control, temporal resolution reduction is used to avoid jitters in a video. Furthermore, in a cloud computing environment such as Amazon EC2, the computing resources are more expensive as compared with the storage resources. Therefore, to avoid repetition of transcoding operations, a transcoded video needs to be stored for a certain time. To store all videos for the same amount of time is also not cost-e cient because popular transcoded videos have high access rate while unpopular transcoded videos are rarely accessed. This thesis provides a cost-e cient computation and storage trade-o strategy, which stores videos in the video repository as long as it is cost-e cient to store them. This thesis also proposes video segmentation strategies for bit rate reduction and spatial resolution reduction video transcoding. The evaluation of proposed strategies is performed using a message passing interface based video transcoder, which uses a coarse-grain parallel processing approach where video is segmented at group of pictures level.

Twitch-palvelun katsomiseen tarkoitetun Windows Store -sovelluksen toteutus

Tämä työ kertoo Twitch.tv-palvelun videolähetyksien katsomiseen tarkoitetun sovelluksen kehittämisestä. Sovellus on tarkoitettu tablet-laitteille, jotka käyttävät Windows 8 -käyttöjärjestelmää. Tarkoituksena on mahdollistaa palvelun käyttäminen ilman selainta suoraan Windows App Store -sovelluksen kautta. Toteutuksessa keskitytään tutkimaan Microsoftin työkaluja ohjelmistonkehitykseen Windowsille, Twitch:n tarjoaman rajapinnan käyttöä ja käyttömahdollisuuksia. Työssä kerrotaan näiden työkalujen rajoittuneisuudesta ja tästä aiheutuvista ongelmista edellä kuvattua sovellusta kehittäessä. Ohjelmistossa panostetaan käytettävyyteen erityisesti tablet-laitteen näkökulmasta, käyttöliittymän suunnittelussa otetaan huomioon yhtenevä ulkonäkö ja Metro UI:n tyyli.

Mobiilialan Start-up -yrityksen jakelukanavan valinta

Diplomityössä tutkitaan mobiilisovellusten keskitettyjä jakelukanavia Start-up – yritysten näkökulmasta. Työssä selvitetään, mitkä tekijät vaikuttavat Start-up – yrityksen jakelukanavan valintaan ja millä perusteilla valinta tehdään. Työn tuloksena saatiin 318 sovelluskehittäjän arvio kymmeneen valintakriteeriin. Merkittävin yksittäinen tekijä Start-up –yrityksille on laitekannan koko. Lisäksi Start-up –yritykset arvostavat muita enemmän sovellusten löydettävyyttä, odotettuja tulovirtoja ja omaa asiantuntemustansa. Mielipiteet Start-up –yritysten kesken jakaa kuitenkin valittu jakelukanava. Suurin yksittäinen päätöskriteeri on markkinatutkimus, yksin tai yhdessä media- ja lehdistötietojen kanssa.

Ecological distribution of Cyanophyceae in lotic ecosystems of São Paulo State

A hundred seventy two stream reaches from six distinct natural regions (parts of biomes or geological areas) in São Paulo State (Atlantic Rainforest, Cerrado, Hard Water regions, Northwest region, Subtropical Rainforest, and Tropical Rainforest) were searched for the most representative macroscopic Cyanophyceae of phytobenthic communities. Selected ecological parameters were analyzed in each stream segment: conductance, current velocity, oxygen saturation, pH, turbidity, and water temperature. Algal abundance was evaluated as percentage cover. Thirthy four cyanophyte taxa were identified and Phormidium retzii was the most widespread species throughout the State, occurring in all studied regions, except in hard water areas, and was negatively correlated to conductance. The subtropical Rainforest region presented the highest mean species richness per site, whereas the tropical Rainforest region had the highest abundance (percentage cover) of blue-green algae. Correlation tests revealed that conductance was significantly and negatively related to variations in abundance and richness of cyanophyte in streams of São Paulo State. This relationship probably reflects the ability of blue-green algae to grow at medium to low ion content and to take advantage under nutrient stress conditions.

Cost-efficient virtual machine management : provisioning, admission control, and consolidation

One of the main challenges in Software Engineering is to cope with the transition from an industry based on software as a product to software as a service. The field of Software Engineering should provide the necessary methods and tools to develop and deploy new cost-efficient and scalable digital services. In this thesis, we focus on deployment platforms to ensure cost-efficient scalability of multi-tier web applications and on-demand video transcoding service for different types of load conditions. Infrastructure as a Service (IaaS) clouds provide Virtual Machines (VMs) under the pay-per-use business model. Dynamically provisioning VMs on demand allows service providers to cope with fluctuations on the number of service users. However, VM provisioning must be done carefully, because over-provisioning results in an increased operational cost, while underprovisioning leads to a subpar service. Therefore, our main focus in this thesis is on cost-efficient VM provisioning for multi-tier web applications and on-demand video transcoding. Moreover, to prevent provisioned VMs from becoming overloaded, we augment VM provisioning with an admission control mechanism. Similarly, to ensure efficient use of provisioned VMs, web applications on the under-utilized VMs are consolidated periodically. Thus, the main problem that we address is cost-efficient VM provisioning augmented with server consolidation and admission control on the provisioned VMs. We seek solutions for two types of applications: multi-tier web applications that follow the request-response paradigm and on-demand video transcoding that is based on video streams with soft realtime constraints. Our first contribution is a cost-efficient VM provisioning approach for multi-tier web applications. The proposed approach comprises two subapproaches: a reactive VM provisioning approach called ARVUE and a hybrid reactive-proactive VM provisioning approach called Cost-efficient Resource Allocation for Multiple web applications with Proactive scaling. Our second contribution is a prediction-based VM provisioning approach for on-demand video transcoding in the cloud. Moreover, to prevent virtualized servers from becoming overloaded, the proposed VM provisioning approaches are augmented with admission control approaches. Therefore, our third contribution is a session-based admission control approach for multi-tier web applications called adaptive Admission Control for Virtualized Application Servers. Similarly, the fourth contribution in this thesis is a stream-based admission control and scheduling approach for on-demand video transcoding called Stream-Based Admission Control and Scheduling. Our fifth contribution is a computation and storage trade-o strategy for cost-efficient video transcoding in cloud computing. Finally, the sixth and the last contribution is a web application consolidation approach, which uses Ant Colony System to minimize the under-utilization of the virtualized application servers.

Ecological distribution of stream macroalgae in different spatial scales using taxonomic and morphological groups

We examined the ecological distribution of macroalgal communities in streams using species groups (taxonomic units = algal phyla, and morphological = morphological types) with similar structures and functions instead of the species themselves. The study was conducted from June to July/2007 in two drainage basins located in mid-southern region of Paraná State , Brazil. Evaluations of macroalgal communities took into consideration the following spatial scales: the drainage basin (the Pedras river and Marrecas river basins), shading regime (open and shaded stream segments), mesohabitats (riffles and pools), and microhabitats (sampling units of 0.05m2). A total of 29 taxa (23 subgeneric, one generic, and five vegetative groups) were identified. On these, 12 taxa belong to Chlorophyta, 11 to Cyanobacteria, four to Heterokontophyta, and two to Rhodophyta. The proportions of morphological types were: 24% free filaments, 17.25% mats, tufts, gelatinous colonies, and gelatinous filaments, 7% crusts. In terms of spatial scales, we observed a predominance of Chlorophyta in open stream segments and Cyanobacteria in shaded stream segments, reflecting the loss of competitive advantage of green algae in sites with low energy availability. In the mesohabitats, the morphological types recorded in pools were predominantly poorly adapted to fast currents (free filaments), while those found in riffles (mats, tufts and gelatinous filaments) were highly resistant to fast water flows. As such, the use of species groupings based on algal taxonomy associated with morphological characteristics proved to be useful to understanding the distributions of these organisms in lotic environments.

AQUAREL CONCEPT Aquatic resources for green energy realization

The AQUAREL project studied the availability and optional utilization methods for fish processing side streams and other aquatic biomaterial in the Republic of Karelia. Additionally processing aquatic biomaterial with manure and sewage sludge was studied. Based on the results, the most feasible option today is to process fish side streams to fish oil and dewatered oil-free residue and to use them for fish or animal feed production. However, it is necessary to highlight, that changes in e.g. economic environment, energy prices and demand may require re-evaluating the results and conclusions made in the project. Producing fish oil from fish processing side streams is an easy and relatively simple production process generating a valuable end product. The functionality of the process was confirmed in a pilot conducted in the project. The oil and solids are separated from the heated fish waste based on gravity. The fish oil separating on top of the separator unit is removed. Fish oil can as such be utilized for heating purposes, fish meal or animal feed production, but it can also be further processed to biodiesel. However, due to currently moderate energy prices in Russia, biodiesel production is not economically profitable. Even if the fish oil production process is not complicated, the operative management of small-scale fish oil production unit requires dedicated resources and separate facilities especially to meet hygiene requirements. Managing the side streams is not a core business for fish farmers. Efficient and economically profitable fish oil production requires a centralized production unit with bigger processing capacity. One fish processing unit needs to be designed to manage side streams collected from several fish farms. The optimum location for the processing unit is in the middle of the fish farms. Based on the transportation cost analysis in the Republic of Karelia, it is not economically efficient to transport bio-wastes for more than 100 km since the transportation costs start increasing substantially. Another issue to be considered is that collection of side streams, including the dead fish, from the fish farms should be organized on a daily basis in order to eliminate the need for storing the side streams at the farms. Based on AQUAREL project studies there are different public funding sources available for supporting and enabling profitable and environmentally sustainable utilization, research or development of fish processing side streams and other aquatic biomaterial. Different funding programmes can be utilized by companies, research organizations, authorities and non-governmental organizations.

Toimintamalli kuormantarkastukseen ja kaatopaikkakelpoisuuden arviointiin

Vuoden 2016 alusta alkaen astuu Suomessa voimaan orgaanisen jätteen kaatopaikkakielto, joka rajoittaa voimakkaasti biohajoavan tai muun orgaanisen aineksen sijoittamista kaatopaikalle. Kiellon tavoite on ohjata orgaaniset jätevirrat hyödyntämiskäsittelyyn ja vähentää kaatopaikkasijoituksen ympäristövaikutuksia. Tämän diplomityön tavoitteena oli orgaanisen jätteen kaatopaikkakieltoon varautumiseksi luoda toimintamalli jätekuormien vastaanottoon, tarkastukseen ja käsittelyyn Keltakankaan jätekeskuksessa. Vuonna 2016 käyttöön otettavassa toimintamallissa kaatopaikalle sijoitetaan vain kaatopaikkakelpoiseksi todistettuja teollisuuden jätteitä ja asbestijätettä, epäorgaanisia jakeita sekä sekalaisen jätteen lajittelussa tai mekaanisessa käsittelyssä syntyviä hyödyntämiskelvottomia rejektejä. Usea tällä hetkellä kaatopaikalle sijoitettava jätelaji ohjautuu vaihtoehtoiseen käsittelyyn. Toimintamallin mukaan kaikki jätekeskukseen vastaanotettavat sekalaiset jätekuormat ohjataan tarkastettavaksi, esikäsiteltäväksi ja tarvittaessa mekaaniseen lajittelulinjastoon kaatopaikkasijoittamisen sijaan. Ongelmallinen jae on hyödyntämiskelvoton PVC-muovi, joka nostaa rejektien orgaanisen aineksen pitoisuutta. Niin kauan kuin PVC:lle ei ole olemassa hyötykäyttökohdetta, se ohjautunee poikkeusluvalla jätteenkäsittelyn rejektien mukana kaatopaikalle. Aiemmin sekalaisesta jätteestä 70–80 % on sijoitettu kaatopaikalle, mutta uusi lajittelulinjasto mahdollistaa käsiteltävän jätemäärä voimakkaan kasvattamisen. Toimintamallin testausvaiheessa vastaanotetuista sekalaisista kuormista luokiteltiin 11 % energiahyödynnettäviksi kotitalousjätteen kaltaisiksi, 69 % lajittelulinjastossa käsiteltäviksi ja 20 % hyödyntämiskelvottomaksi kaatopaikkajätteeksi. Kaatopaikalle sijoitettava kokonaisjätemäärä on uuden toimintamallin myötä mahdollista puolittaa, kun sekalaisen jätteen käsittelyä lisätään ja useat muut jätelajit ohjautuvat vaihtoehtoiseen käsittelyyn.

Sahateollisuuden jätteiden hyötykäyttö menetelmät ja viranomaisraportoinnin kehittäminen

Yritysten ympäristönsuojelua ohjailevat kansalliset lait ja asetukset kuten ympäristönsuojelulaki (86/2000) ja jätelaki (646/2011) sekä Euroopan unionin lainsäädäntö. Ympäristönsuojelu on yrityksille yhä tärkeämpi osa liiketoimintaa. Tähän ovat vaikuttaneet yhä enemmän kiristynyt lainsäädäntö ja taloudellisen hyödyn tavoittelu ympäristöasioiden hyvän hoidon seurauksena sekä sidosryhmien lisääntynyt kiinnostus yritysten ympäristöasioista. Diplomityön tavoitteena oli perehtyä uuden jätelain tuomiin muutoksiin sahateollisuuden osalta, selvittää sahateollisuuden jätteiden hyötykäyttö mahdollisuuksia yleisesti sekä kehittää viranomaisraportointia jätteiden osalta. Diplomityössä analysoidaan Kiteen sahan jätevirtoja ja niiden käsittelyä, sekä hyötykäyttöä. Tarkoituksena on pyrkiä tilanteeseen, jossa syntyvät jätteet käsiteltäisiin siten, että jätteiden käsittelystä aiheutuvat kustannukset pienenisivät ja kaatopaikalle sijoitettavan jätteen määrä vähenisi ilman investointien tarvetta. Työssä vertaillaan muiden Stora Enson Suomen sahojen jätevirtoja ja niiden hyötykäyttöä Kiteen sahan tilanteeseen. Tavoitteena on löytää sellaisia jätteiden hyötykäyttömahdollisuuksia, jotka olisivat hyödynnettävissä kaikilla Stora Enson Suomen sahoilla.

Working fluid selection and design of small-scale waste heat recovery systems based on organic Rankine cycles

Demand for the use of energy systems, entailing high efficiency as well as availability to harness renewable energy sources, is a key issue in order to tackling the threat of global warming and saving natural resources. Organic Rankine cycle (ORC) technology has been identified as one of the most promising technologies in recovering low-grade heat sources and in harnessing renewable energy sources that cannot be efficiently utilized by means of more conventional power systems. The ORC is based on the working principle of Rankine process, but an organic working fluid is adopted in the cycle instead of steam. This thesis presents numerical and experimental results of the study on the design of small-scale ORCs. Two main applications were selected for the thesis: waste heat re- covery from small-scale diesel engines concentrating on the utilization of the exhaust gas heat and waste heat recovery in large industrial-scale engine power plants considering the utilization of both the high and low temperature heat sources. The main objective of this work was to identify suitable working fluid candidates and to study the process and turbine design methods that can be applied when power plants based on the use of non-conventional working fluids are considered. The computational work included the use of thermodynamic analysis methods and turbine design methods that were based on the use of highly accurate fluid properties. In addition, the design and loss mechanisms in supersonic ORC turbines were studied by means of computational fluid dynamics. The results indicated that the design of ORC is highly influenced by the selection of the working fluid and cycle operational conditions. The results for the turbine designs in- dicated that the working fluid selection should not be based only on the thermodynamic analysis, but requires also considerations on the turbine design. The turbines tend to be fast rotating, entailing small blade heights at the turbine rotor inlet and highly supersonic flow in the turbine flow passages, especially when power systems with low power outputs are designed. The results indicated that the ORC is a potential solution in utilizing waste heat streams both at high and low temperatures and both in micro and larger scale appli- cations.