Computational studies for the design of process equipment with complex geometries

This study combines several projects related to the flows in vessels with complex shapes representing different chemical apparata. Three major cases were studied. The first one is a two-phase plate reactor with a complex structure of intersecting micro channels engraved on one plate which is covered by another plain plate. The second case is a tubular microreactor, consisting of two subcases. The first subcase is a multi-channel two-component commercial micromixer (slit interdigital) used to mix two liquid reagents before they enter the reactor. The second subcase is a micro-tube, where the distribution of the heat generated by the reaction was studied. The third case is a conventionally packed column. However, flow, reactions or mass transfer were not modeled. Instead, the research focused on how to describe mathematically the realistic geometry of the column packing, which is rather random and can not be created using conventional computeraided design or engineering (CAD/CAE) methods. Several modeling approaches were used to describe the performance of the processes in the considered vessels. Computational fluid dynamics (CFD) was used to describe the details of the flow in the plate microreactor and micromixer. A space-averaged mass transfer model based on Fick’s law was used to describe the exchange of the species through the gas-liquid interface in the microreactor. This model utilized data, namely the values of the interfacial area, obtained by the corresponding CFD model. A common heat transfer model was used to find the heat distribution in the micro-tube. To generate the column packing, an additional multibody dynamic model was implemented. Auxiliary simulation was carried out to determine the position and orientation of every packing element in the column. This data was then exported into a CAD system to generate desirable geometry, which could further be used for CFD simulations. The results demonstrated that the CFD model of the microreactor could predict the flow pattern well enough and agreed with experiments. The mass transfer model allowed to estimate the mass transfer coefficient. Modeling for the second case showed that the flow in the micromixer and the heat transfer in the tube could be excluded from the larger model which describes the chemical kinetics in the reactor. Results of the third case demonstrated that the auxiliary simulation could successfully generate complex random packing not only for the column but also for other similar cases.

Quality, Productivity and Economy in Welding Manufacturing - Case Study: West Africa

This thesis studies quality, productivity and economy in welding manufacturing in West African states such as Ghana, Nigeria and Cameroon. The study consists of two parts: the first part, which forms the theoretical background, reviews relevant literature concerning the metal and welding industries, and measurement of welding quality, productivity and economy. The second part, which is the empirical part, aims to identify activities in the metal manufacturing industries where welding is extensively used and to determine the extent of welding quality, productivity and economy measurements in companies operating in the metal manufacturing industries. Additionally, the thesis aims to identify challenges that companies face and to assess the feasibility of creating a network to address these issues. The research methods used in the empirical part are the case study (qualitative) method and the survey (quantitative) method. However, the case study method was used to elicit information from companies in Ghana, while the survey method was used to elicit information from companies in Nigeria and Cameroon. The study considers important areas that contribute to creating awareness and understanding of the current situation of the welding industry in West Africa. These areas include the metal manufacturing industrial sector, metal products manufactured, metal production and manufacturing systems deployed, welding quality, productivity and economy measurement systems utilized, equipment and materials on the markets, general challenges facing companies in welding operations, welding technology programs and research in local universities, and SWOT analysis of the various West African states. The notable findings indicate that majority of the companies operate in the constructionindustrial sector. Also, majority of the companies are project manufacturing oriented, thus provide services to customers operating in the growing industries such as the oil and gas, mining, food and the energy industry. In addition, only few companies are certified under standards such as ISO 9001, ISO 3834, and OHSAS 18001. More so, majority of the companies employ manual welding technique, and shielded metal arc welding (SMAW) as the commonly used welding process. Finally, welder salary is about € 300 / month as of June 2013 and the average operations turnover of medium to large companies is about € 5 million / year as at 2012. Based on analysis of the results of the study, it is noted that while welding activities are growing, the availability of cheap labor, the need for company and welder qualification and certification, and the need to manufacture innovative products through developmental projects (transfer of welding expertise and technology) remain as untapped opportunities in the welding industry in the West African states. The study serves as a solid platform for further research and concludes with several recommendations for development of the West African welding industry.

Elintarviketehtaan tuotantolinjan kunnonvalvonnan kehittäminen

Tutkimuksen tavoitteena oli kunnonvalvontajärjestelmän kehittäminen nykyaikaiselle elintarviketeollisuuden tuotantolinjalle. Työssä etsittiin olemassa olevia kunnonvalvontamenetelmiä ja -sovelluksia erityisesti jäätelötuotantolaitteiden tarpeisiin. Kirjallisuudesta löydettiin sovelluksia lähinnä yksittäisille komponenteille ja kone-elimille. Tutkimuksen kohteena oleva tuotantolinja käytiin läpi toimintojen ja komponenttien osalta. Tehtaan laitekantaa ja valmiutta kunnonvalvonnan käyttöönotolle käsiteltiin yleisellä tasolla. Kunnonvalvontajärjestelmää kehitettäessä käytettiin hyväksi kirjallisuudesta löytyneitä menetelmiä, joista soveltuvimpia käytettiin kunnonvalvontametodien kartoittamiseen. Kunnonvalvontametodit muodostettiin toiminnanohjausjärjestelmästä ja linjan käyttöönotosta saatujen tietojen avulla. Tietoja käytettiin vika-vaikutusanalyysissä, joka oli pohjana komponentti- ja menetelmäkohtaisessa analyysissa. Kriittisiä ja tuotannon tehokkuuteen vaikuttavia koneenosia ja kokonaisuuksia tarkasteltiin kunnonvalvontamenetelmien soveltuvuuden avulla. Tutkimuksen edetessä kehitettiin kokonaisvaltaiset toiminnanohjausjärjestelmän avulla toimivat eritasoiset kunnonvalvontahypoteesit, joiden avulla linjan yksittäisten komponenttien kuntoa voidaan valvoa. Lisäksi tutkimuksessa kehitettiin uusia kunnonvalvontasovelluksia, joita on mahdollista käyttää myös tehtaan muilla linjoilla. Kunnonvalvontahypoteeseja käytettiin kokonaisen kunnonvalvontajärjestelmän luomiseen. Tehtaalla on mahdollisuus valita käyttöönotettavan kunnonvalvonnan taso hypoteesien sekä kunnossapitostrategian avulla.

Reflectance indices as a diagnostic tool for weed control performed by multipurpose equipment in precision agriculture

Several tools of precision agriculture have been developed for specific uses. However, this specificity may hinder the implementation of precision agriculture due to an increasing in costs and operational complexity. The use of vegetation index sensors which are traditionally developed for crop fertilization, for site-specific weed management can provide multiple utilizations of these sensors and result in the optimization of precision agriculture. The aim of this study was to evaluate the relationship between reflectance indices of weeds obtained by the GreenSeekerTM sensor and conventional parameters used for weed interference quantification. Two experiments were conducted with soybean and corn by establishing a gradient of weed interference through the use of pre- and post-emergence herbicides. The weed quantification was evaluated by the normalized difference vegetation index (NDVI) and the ratio of red to near infrared (Red/NIR) obtained using the GreenSeekerTM sensor, the visual weed control, the weed dry matter, and digital photographs, which supplied information about the leaf area coverage proportions of weed and straw. The weed leaf coverage obtained using digital photography was highly associated with the NDVI (r = 0.78) and the Red/NIR (r = -0.74). The weed dry matter also positively correlated with the NDVI obtained in 1 m linear (r = 0.66). The results indicated that the GreenSeekerTM sensor originally used for crop fertilization could also be used to obtain reflectance indices in the area between rows of crops to support decision-making programs for weed control.

Value co-creation in gaming the industry: A qualitative research on virtual discussion forums

This study discusses the procedures of value co-creation that persist in gaming industry. The purpose of this study was to identify the procedures that persist in current video gaming industry which answers the main research problem how value is co-created in video gaming industry followed by three sub questions: (i) What is value co-creation in gaming industry? (ii) Who participates in value co-creation in gaming industry? (iii) What are the procedures that are involved in value co-creation in gaming industry? The theoretical background of the study consists of literature relating to the theory of marketing i.e., notion of value, conventional understanding of value creation, value chain, co-creation approach, co-production approach. The research adopted qualitative research approach. As a platform of relationship researcher used web 2.0 tool interface. Data were collected from the social networks and netnography method was applied for analyzing them. Findings show that customer and company both co-create optimum level of value while they interact with each other and within the customers as well. However mostly the C2C interaction, discussions and dialogues threads that emerged around the main discussion facilitated to co-create value. In this manner, companies require exploiting and further motivating, developing and supporting the interactions between customers participating in value creation. Hierarchy of value co-creation processes is the result derived from the identified challenges of value co-creation approach and discussion forums data analysis. Overall three general sets and seven topics were found that explored the phenomenon of customer to customer (C2C) and business to customer (B2C) interaction/debating for value co-creation through user generated contents. These topics describe how gamer contributes and interacts in co-creating value along with companies. A methodical quest in current research literature acknowledged numerous evolving flows of value in this study. These are general management perspective, new product development and innovation, virtual customer environment, service science and service dominant logic. Overall the topics deliver various realistic and conceptual implications for using and handling gamers in social networks for augmenting customers’ value co-creation process.

The Role of networks in the internationalization process of Finnish design companies

Finnish design has attracted global attention lately and companies within the industry have potential in international markets. Because networks have been found to be extremely helpful in a firm’s international business operations and usefulness of networks is not fully exploited, their role in Finnish design companies is investigated. Accordingly, this study concentrates on understanding the role of networks in the internationalization process of Finnish design companies. This was investigated through describing the internationalization process of Finnish design companies, analyzing what kind of networks are related to internationalization process of Finnish design companies, and analyzing how networks are utilized in the internationalization process of Finnish design companies. The theoretical framework explores the Finnish design industry, internationalization process and networks. The Finnish design industry is introduced in general and the concept of design is defined to refer to the industries of textiles, furniture, clothing, and lighting equipment in the research. The theories of internationalization process, the Uppsala model and Luostarinen’s operation modes, are explored in detail. The Born Global theory, which is a contrary view to stage models, is also discussed. The concept of network is investigated, networks are classified into business and social networks, and network approach to internationalization is discussed. The research is conducted empirically and the research method is a descriptive case study. In this study, four case companies are investigated: the interior decoration unit of L-Fashion Group, Globe Hope, Klo Design, and Melaja Ltd. Data is collected by semi-structured interviews and the analysis is done in the following way: the case companies are introduced, their internationalization processes and networks are described and, finally, the comparison of the case companies is done in a form of cross-case analysis. This research showed that cooperation with social networks, such as locals or employees who have experience from the target market can be extremely helpful in the beginning of a Finnish design company’s internationalization process. This study also indicated that public organizations do not necessarily enhance the internationalization process in a design company point-of-view. In addition, the research showed that there is cooperation between small Finnish design companies whereas large design companies are not as open to cooperation with competitors.

Developing sustainable value proposition: A case study from manufacturing industry

Increasing pressures to reduce costs, inprove productivity, and lower the environmental impact are forcing suppliers to present evidences of the monetary and societal value they create for the customers and society around. The extant academic literature on the practical activities related to topic is still sparse and this study addresses the gap by developing sustainable customer value proposition for Valmet’s recycled fibre line solution for the Chinese market. The research is based on literature review and single case study method. Theoretically the study is connected to the emerging literature of customer value and life cycle engineering, and to the research of sustainable development in the field of marketing. For exloiting empirical evidences, in-depth supplier interviews and customer survey were conducted. The results suggest that selling of recycled fibre line solution requires tangible and credible evidence of the value and utility which is delivered for the customer. In addition to the economic benefits also societal benefits should be included in the value proposition that are the focus of attention in China. Still, the role of discovered benefits may be contradictory until they are communicated to appropriate decision makers. Managerially the study contributes to the customer value management and quantification knowledge and practices in Valmet’s organization.

Utilization of steelmaking waste materials for production of calcium carbonate (CaCO3)

The steel industry produces, besides steel, also solid mineral by-products or slags, while it emits large quantities of carbon dioxide (CO2). Slags consist of various silicates and oxides which are formed in chemical reactions between the iron ore and the fluxing agents during the high temperature processing at the steel plant. Currently, these materials are recycled in the ironmaking processes, used as aggregates in construction, or landfilled as waste. The utilization rate of the steel slags can be increased by selectively extracting components from the mineral matrix. As an example, aqueous solutions of ammonium salts such as ammonium acetate, chloride and nitrate extract calcium quite selectively already at ambient temperature and pressure conditions. After the residual solids have been separated from the solution, calcium carbonate can be precipitated by feeding a CO2 flow through the solution. Precipitated calcium carbonate (PCC) is used in different applications as a filler material. Its largest consumer is the papermaking industry, which utilizes PCC because it enhances the optical properties of paper at a relatively low cost. Traditionally, PCC is manufactured from limestone, which is first calcined to calcium oxide, then slaked with water to calcium hydroxide and finally carbonated to PCC. This process emits large amounts of CO2, mainly because of the energy-intensive calcination step. This thesis presents research work on the scale-up of the above-mentioned ammonium salt based calcium extraction and carbonation method, named Slag2PCC. Extending the scope of the earlier studies, it is now shown that the parameters which mainly affect the calcium utilization efficiency are the solid-to-liquid ratio of steel slag and the ammonium salt solvent solution during extraction, the mean diameter of the slag particles, and the slag composition, especially the fractions of total calcium, silicon, vanadium and iron as well as the fraction of free calcium oxide. Regarding extraction kinetics, slag particle size, solid-to-liquid ratio and molar concentration of the solvent solution have the largest effect on the reaction rate. Solvent solution concentrations above 1 mol/L NH4Cl cause leaching of other elements besides calcium. Some of these such as iron and manganese result in solution coloring, which can be disadvantageous for the quality of the PCC product. Based on chemical composition analysis of the produced PCC samples, however, the product quality is mainly similar as in commercial products. Increasing the novelty of the work, other important parameters related to assessment of the PCC quality, such as particle size distribution and crystal morphology are studied as well. As in traditional PCC precipitation process, the ratio of calcium and carbonate ions controls the particle shape; a higher value for [Ca2+]/[CO32-] prefers precipitation of calcite polymorph, while vaterite forms when carbon species are present in excess. The third main polymorph, aragonite, is only formed at elevated temperatures, above 40-50 °C. In general, longer precipitation times cause transformation of vaterite to calcite or aragonite, but also result in particle agglomeration. The chemical equilibrium of ammonium and calcium ions and dissolved ammonia controlling the solution pH affects the particle sizes, too. Initial pH of 12-13 during the carbonation favors nonagglomerated particles with a diameter of 1 μm and smaller, while pH values of 9-10 generate more agglomerates of 10-20 μm. As a part of the research work, these findings are implemented in demonstrationscale experimental process setups. For the first time, the Slag2PCC technology is tested in scale of ~70 liters instead of laboratory scale only. Additionally, design of a setup of several hundreds of liters is discussed. For these purposes various process units such as inclined settlers and filters for solids separation, pumps and stirrers for material transfer and mixing as well as gas feeding equipment are dimensioned and developed. Overall emissions reduction of the current industrial processes and good product quality as the main targets, based on the performed partial life cycle assessment (LCA), it is most beneficial to utilize low concentration ammonium salt solutions for the Slag2PCC process. In this manner the post-treatment of the products does not require extensive use of washing and drying equipment, otherwise increasing the CO2 emissions of the process. The low solvent concentration Slag2PCC process causes negative CO2 emissions; thus, it can be seen as a carbon capture and utilization (CCU) method, which actually reduces the anthropogenic CO2 emissions compared to the alternative of not using the technology. Even if the amount of steel slag is too small for any substantial mitigation of global warming, the process can have both financial and environmental significance for individual steel manufacturers as a means to reduce the amounts of emitted CO2 and landfilled steel slag. Alternatively, it is possible to introduce the carbon dioxide directly into the mixture of steel slag and ammonium salt solution. The process would generate a 60-75% pure calcium carbonate mixture, the remaining 25-40% consisting of the residual steel slag. This calcium-rich material could be re-used in ironmaking as a fluxing agent instead of natural limestone. Even though this process option would require less process equipment compared to the Slag2PCC process, it still needs further studies regarding the practical usefulness of the products. Nevertheless, compared to several other CO2 emission reduction methods studied around the world, the within this thesis developed and studied processes have the advantage of existing markets for the produced materials, thus giving also a financial incentive for applying the technology in practice.

Käyttövarmuusanalyysin tuottama tärkeysjärjestys elintarviketeollisuuden prosessilaitteille – Suuntaviivat kustannustietoisen kunnossapitostrategian luomiselle

Hallitsematon ja reaktiivinen kunnossapito on eräs tuotannon suurimpia kustannustekijöistä. Suunnitelmallisesti ja systemaattisesti johdettuna kunnossapito on tuotantotehokkuuden suurin vaikuttaja. Merkittävä osa tuotannon tehokkuuden ylläpidosta saavutetaan laitteiden käyttövarmuudella. Käyttövarmuuden saaminen hallintaan perustuu ennakoivan kunnossapidon määrän kasvattamiseen. Samalla korjaavan kunnossapidon kustannusriski laskee ja siihen käytetty panos vähenee. Huonolla kunnossapidon suunnitelmallisuudella on päinvastaiset vaikutukset. Tavoitteena on määritellä prosessilaitteiden käyttövarmuuksiin perustuva laitekriittisyys. Tutkimuksessa yhdistetään riskien arviointimenetelmiä, joilla keskimääräiset vikavälit ja seuraukset valmistukseen mallinnetaan. Kriittisyystekijöitä ovat käytettävyys, luotettavuus, kustannustekijät, turvallisuus ja ympäristövaikutukset. Tekijöiden arvottamiseen kehitettiin riksianalyysitaulukko. Kriittisyysluokat jaettiin kolmeen kategoriaan, joista A on kriittisin, B keskinkertainen ja C on matalin luokka. Lähtötietojen keräys toteutettiin triangulaatiomenetelmää soveltaen. Empiirisessä osassa HKScan Oy:n lihanjalostustehtaan jauheliha- ja kestomakkaraosastojen laitteet jaettiin A-, B- ja C-luokkiin. Kriittisimpiä laitteita oli 20 prosenttia analysoidusta laitemäärästä. Nämä A-luokkaan sijoitetut laitteet aiheuttavat 80 prosenttia kustannusriskeistä. B-luokkaan kuuluu 50 prosenttia ja C-luokkaan 30 prosenttia laitteista. Luokittelusta erotettiin havaitut turvallisuusriskit riskienhallinnan toimenpiteitä varten. Kustannustietoinen kriittisyysluokittelu on pohja kunnossapitostrategian rakentamiselle. Tämän avuksi esitettiin taulukot huolto-ohjelman luomiseen ja luokituksien hyödyntämiseen päivittäisessä toiminnassa.

The Effect of Plant Closures on Market Value: Empirical Evidence from Pulp and Paper Industry 2004-2012

The aim of this study was to research how plant closure announcements affect the market value of the largest pulp and paper industry companies in the world. Also the effect of announcements on competitors was researched and whether the location of plants, timing, reasons for the closures, and characteristics of the closing firms and competitors have an impact on the results. The overall sample included 57 events in the years 2004-2012 and event study was used as a research method. Main theories were signaling theory and spillover effect. According to empirical results, investors consider plant closure announcements as a positive signal for market value. The spillover effect on competitors was, on average, positive and characteristics of the firms and closures had an effect on the results. Furthermore, the market generally predicted the closures and overreacted to them on the announcement day and after it. It is possible for corporate management and investors to learn from the results and use them as support for their decision making.

Open innovation model for a large company in the ICT industry: Case Ericsson LMF

Open innovation paradigm states that the boundaries of the firm have become permeable, allowing knowledge to flow inwards and outwards to accelerate internal innovations and take unused knowledge to the external environment; respectively. The successful implementation of open innovation practices in firms like Procter & Gamble, IBM, and Xerox, among others; suggest that it is a sustainable trend which could provide basis for achieving competitive advantage. However, implementing open innovation could be a complex process which involves several domains of management; and whose term, classification, and practices have not totally been agreed upon. Thus, with many possible ways to address open innovation, the following research question was formulated: How could Ericsson LMF assess which open innovation mode to select depending on the attributes of the project at hand? The research followed the constructive research approach which has the following steps: find a practical relevant problem, obtain general understanding of the topic, innovate the solution, demonstrate the solution works, show theoretical contributions, and examine the scope of applicability of the solution. The research involved three phases of data collection and analysis: Extensive literature review of open innovation, strategy, business model, innovation, and knowledge management; direct observation of the environment of the case company through participative observation; and semi-structured interviews based of six cases involving multiple and heterogeneous open innovation initiatives. Results from the cases suggest that the selection of modes depend on multiple reasons, with a stronger influence of factors related to strategy, business models, and resources gaps. Based on these and others factors found in the literature review and observations; it was possible to construct a model that supports approaching open innovation. The model integrates perspectives from multiple domains of the literature review, observations inside the case company, and factors from the six open innovation cases. It provides steps, guidelines, and tools to approach open innovation and assess the selection of modes. Measuring the impact of open innovation could take years; thus, implementing and testing entirely the model was not possible due time limitation. Nevertheless, it was possible to validate the core elements of the model with empirical data gathered from the cases. In addition to constructing the model, this research contributed to the literature by increasing the understanding of open innovation, providing suggestions to the case company, and proposing future steps.

Maantieliikenteen mitta- ja massauudistuksen hyödyntämismahdollisuudet metsäteollisuustuotteiden kuljetuksissa

Työn tavoitteena oli tuottaa selvitys kohdeyrityksen kotimaan kuljetusten nykytilasta sekä toimenpidesuositus perusteluineen, onko tarpeellista kannustaa nykyisiä kuljetusalihankkijoita hankkimaan uutta kuljetuskalustoa. Lisäksi tutkimuksen tavoitteena oli selvittää ne tilanteet, joissa korkeampien kuormien hyödyntäminen olisi kaikkein kannattavinta kohdeyrityksen kannalta. Tutkimuksen teoriaosiossa käytiin läpi kuljetustoimintojen merkitystä yrityksissä, kerrottiin taustatietoa 1.10.2013 voimaantulleesta mitta- ja massauudistuksesta sekä kuljetuspalveluiden hinnoitteluun liittyviä seikkoja. Työn empiriaosiossa käsiteltiin tutkimukseen valittujen case – tehtaiden kotimaankuljetusten nykytilaa ja tehtaisiin liittyviä kuljetuskustannuslaskelmia tuloksineen, sekä nykytilan mukaisia että aiempaa suurempia sallittuja kuormia hyödynnettäessä. Lisäksi empiriaosiossa esitettiin laskelmiin perustuen toimenpidesuosituksia työn toimeksiantajalle. Työn keskeisin tulos oli, että mitta- ja massauudistusta kannattaa hyödyntää tilanteissa, joissa kuljetettavat määrät ovat mahdollisimmat suuria, välimatkat pitkiä ja joissa kuorma puretaan esim. satamassa. Käytännössä tämä toteutuu Pohjois-Suomesta Etelä-Suomeen suuntautuvissa kuljetuksissa ja se on myös kuljetusyritysten näkökulmasta kannattavin vaihtoehto.

Value-based Reference Marketing in a Small Process Industry Software and Service Company

This master’s thesis was done for a small company, Vipetec Oy, which offers specialized technological services for companies mainly in forest industry. The study was initiated partly because the company wants to expand its customer base to a new industry. There were two goals connected to each other. First was to find out how much and what kind of value current customers have realized from ATA Process Event Library, one of the products that the company offers. Second was to determine the best way to present this value and its implications for future value potential to both current and potential customers. ATA helps to make grade and product changes, starting after machine downtime, and recovery from production break faster for customers. All three events sometimes occur in production line. The faster operation results to savings in time and material. In addition to ATA Vipetec also offers other services related to development of automation and optimization of controls. Theoretical part concentrates on the concept of value, how it can be delivered to customers, and what kind of risk customer faces in industrial purchasing. Also the function of reference marketing towards customers is discussed. In the empirical part the realized value for existing customers is evaluated based on both numerical data and interviews. There’s also a brief case study about one customer. After that the value-based reference marketing for a target industry is examined through interviews of these potential customers. Finally answers to the research questions are stated and compared also to the theoretical knowledge about the subject. Results show that those customers’ machines which use the full service concept of ATA usually are able to save more time and material than the machines which use only some features of the product. Interviews indicated that sales arguments which focus on improved competitive status are not as effective as current arguments which focus on numerical improvements. In the case of potential customers in the new industry, current sales arguments likely work best for those whose irregular production situations are caused mainly by fault situations. When the actions of Vipetec were compared to ten key elements of creating customer references, it was seen that many of them the company has either already included in its strategy or has good chances to include them with the help of the results of this study.

Informaatiopalveluiden muutosvoimat, muutokset ja liikkuvuusesteet

Tutkimuksessa kartoitettiin informaatiopalveluiden liiketoiminta-alueella Suomessa toimivien yritysten maantieteellisiä ja palvelukohtaisia strategisia valintoja ja näissä tapahtuneita muutoksia. Tutkimuksen tavoitteena oli selvittää informaatiopalveluiden määritelmää ja strategisten ryhmien teoriaa apuna käyttäen mahdollisia muutoksia informaatiopalveluja Suomessa kuluttajille tarjoavien yritysten perinteisissä toimialoissa tutkimuksen kattamina vuosina 2007–2012. Edelleen tavoitteena oli kuvata yleisten muutosvoimien ja alaan vaikuttavien megatrendien sekä alalla havaittujen liikkuvuusesteiden avulla liiketoimintaympäristössä tapahtuneita muutoksia ja pyrkiä löytämään näihin muutoksiin vaikuttavia syitä. Yrityksiä analysoitiin vuosikertomusten perusteella ja tutkimusotteena käytettiin grounded theoryä. Informaatiopalveluilla tarkoitetaan tietotekniikka-, tietoliikenne-, kustannus- ja audiovisuaalisen toiminnan palveluja. Suoritettujen ryhmittelyjen perusteella pystyttiin havaitsemaan, että osa tutkittavista yrityksistä oli laajentanut toimintaansa perinteisten toimialarajojensa ulkopuolelle johonkin toiseen informaatiopalveluiden liiketoiminta-alueella olevaan toimialaan. Aineistosta ei muodostunut perinteisten toimialajaottelujen mukaisia yritysryhmiä. Suurimmat muutokset näyttivät tapahtuneen perinteisen tietoliikennepalveluiden toimialalla. Vuosikertomuksista tunnistettuja yritysten liiketoimintaympäristössä tapahtuneita muutoksia ja niihin vaikuttavia liikkuvuusesteitä ja muita palveluiden laajuuteen ja alueelliseen ulottuvuuteen vaikuttavia seikkoja ryhmiteltiin yhteiskuntasuhteiden kehikkoon kategorioihin: poliittiset ja lainsäädännölliset, teknologiset, sosiaaliset ja kulttuuriset, fyysiset, taloudelliset ja ekologiset tekijät. Muutosvoimista globalisaatio ja teknologinen kehitys vaikuttavat voimakkaasti ja muovaavat informaatiopalveluiden liiketoiminta-alueen yrityksiä. Internetin nopea kasvu, tiedon digitalisoituminen ja rajattoman, aina läsnä olevan viestinnän lisääntyminen ovat vaikuttaneet kuluttajien käyttäytymiseen luomalla ajasta ja paikasta riippumattoman viestimien ja palveluiden hyödyntämisen. Näiden mega-trendien vaikutus välittyy vuosikertomuksista. Juridiset ja poliittiset tekijät vaikuttavat voimakkaasti informaatiopalveluiden alueella eikä lainsäädäntö näytä vielä riittävästi tukevan innovatiivisia digitaalisia globaaleita palveluja vaan muodostaa liik-kuvuusesteitä. Kuluttajakäyttäytyminen muovaa markkinoita ja edistää teknologista kehitystä. Ala on ollut hyvin teknologiavetoinen, mutta vuosikertomusten perusteella olisi pääteltävissä, että asiakasnäkökulma on tutkimusvuosien aikana vahvistunut. Asiakaskäyttäytyminen ja siihen liittyvät tiedot tuovat tulevaisuudessa kilpailuetua.