Sähköautojen pikalatauksen verkkovaikutukset

Euroopan unionin energiapolitiikka on luonut paineen parantaa energiatehokkuutta kaikilla energiankäytön aloilla. Merkittävä osa energiasta kulutetaan liikenteessä, joten sähköautojen käyttöönotolla voidaan parantaa energiatehokkuutta merkittävästi. Tämän vuoksi on tarkasteltava sähköautojen laajamittaisen levinneisyyden aiheuttamia vaikutuksia sähköverkolle. Tässä diplomityössä tarkastellaan sähköautojen pikalatauksen verkkovaikutuksia. Tarkastelu painottuu kotilatauksen tarkasteluun taajamissa ja maaseudulla. Kuormituksen kasvu simuloidaan hyödyntäen sähköauton lataukselle laskettua kuormituskäyrää, jonka laskenta perustuu keskimääräiseen henkilöauton liikkumiseen, joka on saatavilla Suomen henkilöliikennetutkimuksesta. Simuloinnin tulosten perusteella sähköauton pikalatauksen verkkovaikutukset ovat merkittäviä keskijänniteverkossa ja pienjänniteverkossa. Suuremmat vaikutukset kohdistuvat pienjänniteverkkoon.

Elemental analysis of wood materials by external millibeam thick target PIXE

PIXE (Particle Induce X-ray Emission spectrometry) was used for analysing stem bark and stem wood of Scots pine, Norway spruce and Silver birch. Thick samples were irradiated, in laboratory atmosphere, with 3 MeV protons and the beam current was measured indirectly using a photo multiplicator (PM) tube. Both point scans and bulk analyses were performed with the 1 mm diameter proton beam. In bulk analyses, whole bark and sectors of discs of the stem wood were dry ashed at 550 ˚C. The ashes were homogenised by shaking and prepared to target pellets for PIXE analyses. This procedure generated representative samples to be analysed, but the enrichment also enabled quantification of some additional trace elements. The ash contents obtained as a product of the sample preparation procedure also showed to be of great importance in the evaluation of results in environmental studies. Spot scans from the pith of pine wood outwards, showed clearly highest concentrations of manganese, calcium and zinc in the first spot irradiated, or 2-3 times higher than in the surrounding wood. For stem wood from the crown part of a pine this higher concentration level was found in the first four spots/mms, including the pith and the two following growth rings. Zinc showed increasing concentrations outwards in sapwood of the pine stem, with the over-all lowest concentrations in the inner half of the sapwood. This could indicate emigration of this element from sapwood being under transformation to heartwood. Point scans across sapwood of pine and spruce showed more distinct variations in concentrations relative to hearth wood. Higher concentrations of e.g. zinc, calcium and manganese were found in earlywood than in denser latewood. Very high concentrations of iron and copper were also seen for some earlywood increments. The ash content of stem bark is up to and order higher than for the stem wood. However, when the elemental concentration in ashes of bark and wood of the same disc were compared, these are very similar – this when trees are growing at spots with no anthropogenic contamination from the atmosphere. The largest difference was obtained for calcium which appeared at two times high concentrations in ashes of bark than in ashes of the wood (ratio of 2). Pine bark is often used in monitoring of atmospheric pollution, where concentrations in bark samples are compared. Here an alternative approach is suggested: Bark and the underlying stem wood of a pine trees are dry ashed and analysed. The elemental concentration in the bark ash is then compared to the concentration of the same element in the wood ash. Comparing bark to wood includes a normalisation for the varying availability of an element from the soil at different sites. When this comparison is done for the ashes of the materials, a normalisation is also obtained for the general and locally different enrichment of inorganic elements from wood to bark. Already a ratio >2 between the concentration in the bark ash and the concentration in the wood ash could indicate atmospheric pollution. For monitoring where bark is used, this way of “inwards” comparison is suggested - instead of comparing to results from analyses of bark from other trees (read reference areas), growing at sites with different soil and, locally, different climate conditions. This approach also enables evaluation of atmospheric pollution from sampling of only relative few individual trees –preferable during forest felling.

Anatomia de lesões foliares causadas pelo vírus da Mancha Clorótica do Clerodendrum, transmitido pelo ácaro Brevipalpus phoenicis em diferentes espécies

O gênero botânico Clerodendrum pertence à família Lamiaceae e compreende várias espécies ornamentais, Manchas cloróticas e necróticas em folhas de coração-sangrento foram observadas pela primeira vez em um jardim de Piracicaba, SP, associadas à infestação com Brevipalpus phoenicis (Acari: Tenuipalpidae). Exames de secções de tecidos das lesões foliares ao microscópio eletrônico revelaram ocorrência de efeitos citopáticos do tipo nuclear e concluiu-se que os sintomas eram causados por um vírus transmitido por Brevipalpus (VTB), o qual foi designado de mancha clorótica de Clerodendrum (Clerodendrum Chlorotic Spot Virus- ClCSV). O ClCSV é transmitido mecanicamente de coração-sangrento para coração-sangrento. Em ensaios preliminares foi transmitido por B. phoenicis e mecanicamente para várias outras plantas, além da ocorrência de sua disseminação natural por este ácaro para outras espécies. Visando complementar a caracterização do ClCSV foram feitos estudos sobre alterações anatômicas em folhas de plantas infectadas pelo ClCSV. Foram examinadas secções histológicas de folhas sadias e infectadas pelo ClCSV de C. x speciosum e de outras hospedeiras como Hibiscus schizopetalus, Salvia leucantha, Malvaviscus arboreus e Annona muricata. Constatou-se que o ClCSV causa alterações celulares semelhantes nas diferentes hospedeiras e os sintomas causados por este vírus são similares aos causados por outros vírus transmitidos por Brevipalpus como o vírus da leprose dos citros citoplasmático (Citrus Lepros Virus Cytoplasmic- CiLV-C) e nuclear (Citrus Leprosis Virus Nuclear- CiLV-N), mancha anular do cafeeiro (Coffee Ringspot Virus- CoRSV), mancha anular de Solanum violaefolium (Solanum violaefolium Ringspot Virus- SvRSV) e "Orchid Fleck Vírus" (OFV), representadas por hipertrofia e hiperplasia frequentemente acompanhadas de necrose nos tecidos do parênquima paliçádico e lacunoso.

Chitosan and fungicides on postharvest control of Guignardia citricarpa and on quality of 'Pêra Rio' oranges

Citrus fruits are affected by the black spot disease caused by the fungus Guignardia citricarpa. Chitosan can be used as covering for fruits and may delay the ripening process and inhibit the growth of some fungi. Thus, the control of citrus black spot using chitosan and the fungicides thiabendazole and imazalil was assessed in addition to the physicochemical quality of 'Pêra Rio' oranges. The oranges were immersed into chitosan, thiabendazole or imazalil, and in chitosan mixed with both fungicides. The fruits were then stored at 25 °C, 80% RH, for 7 days and, after this storage period, subjected to physicochemical analyses. Chitosan in association with the fungicides reduced black spot in 'Pêra Rio' oranges and delayed the change in the orange skin colour from green to yellow during the postharvest storage. Total soluble solids, titratable acidity, pH, ascorbic acid content and ratio were not influenced by the treatments. Thus, chitosan applied with the fungicides thiabendazole and imazalil showed potential to control the development of black spot lesions on 'Pêra Rio' oranges during the postharvest period.

Influence of substrates, light, filter paper and pH on the sporulation of Cercospora sojina

Fungi require special substrates for their isolation, vegetative growth and sporulation. In experiments conducted in the laboratory, the influence of substrates, light, filter paper and pH on the sporulation of Cercospora sojina conidia, the causal agent of soybean frogeye leaf spot, was assessed. The media potato sucrose agar, V-8 agar, tomato extract agar, soybean leaf extract agar, soybean seed extract agar, soybean meal agar, soybean flour agar and wheat flour agar were tested, added on the surface, with and without filter paper and under two light regimes, with 12 h light at 25°± 2°C and in the dark. A triple factorial 8x2x2 (substrates x light/dark x with/without filter paper) design with four replicates was used. V-8 agar medium was employed and the pH was adjusted with HCl 0.1N or NaOH 0.1N before autoclaving to the values: 3, 4, 5, 6, 7 and 8, and the pH of V-8 agar medium is 6.7. The evaluation was done on the seventh day of incubation. Data underwent regression analysis. Sporulation was maximized on the agar media V-8, seed extract, oat flour, tomato extract, and potato sucrose in the presence of filter paper and 12h light. On V-8 medium, maximal sporulation was obtained with pH 6.7.

Sensitivity loss by Corynespora cassiicola, isolated from soybean, to the fungicide carbendazim

Soybean target leaf spot, caused by the fungus Corynespora cassiicola, is controlled especially by leaf application of fungicides. In the last seasons, in the central-west region of Brazil, the disease chemical control efficiency has been low. This led to the hypothesis that the control failure could be due to the reduction or loss of the fungus sensitivity to fungicides. To clarify this fact, in vitro experiments were conducted to determine mycelial sensitivity of five C. cassiicola isolates to fungicides. Mycelial growth was assessed based on the growth of the mycelium on the culture medium, in Petri dishes. The medium potato-dextrose-agar was supplemented with the concentrations 0; 0.01; 0.1; 1; 10; 20 and 40 mg/L of the active ingredients carbendazim, cyproconazole, epoxiconazole, flutriafol and tebuconazole. The experiment was conducted and repeated twice in a controlled environment, temperature of 25±2ºC and photoperiod of 12 hours. Data on the percentage of mycelial inhibition were subjected to logarithmic regression analysis and the concentration that inhibits 50% of the mycelial growth (IC50) was calculated. Loss of sensitivity to carbendazim was observed for three fungal isolates, IC50 > 40 mg/L. Considering all five isolates, the IC50 for tebuconazole ranged from 1.89 to 2.80 mg/L, for epoxiconazol from 2.25 to 2.91, for cyproconazole from 9.21 to 20.32 mg/L, and for flutriafol from 0.77 to 2.18 mg/L. In the absence of information on the reference IC50 determined for wild isolates, the lowest values generated in our study can be used as standard to monitor the fungus sensitivity.

In vitro antimicrobial activity of aqueous extracts from Lentinula edodes isolates against Colletotrichum sublineolum and Xanthomonas axonopodis pv. Passiflorae

The aim of this study was to evaluate the antimicrobial activity of aqueous extracts from fruiting bodies of different isolates of Lentinula edodeson the pathogens Colletotrichum sublineolum, the causal agent of anthracnose in sorghum, and Xanthomonas axonopodispv. passiflorae, the causal agent of bacterial spot in passion fruit. Results showed that the aqueous extracts from isolates LE JAB-K and LE 95/01 significantly reduced C. sublineolumspore germination,while the isolate LE 96/22 was the only one to inhibit the pathogen mycelial growth. However, all L. edodesisolates showed inhibitory effect on C. sublineolumappressorium formation. Regarding X. axonopodispv. passiflorae, the aqueous extracts from all L. edodesisolates significantly reduced the in vitromultiplication of the bacterium. However, antimicrobial activity was lost when the extracts were autoclaved, demonstrating their thermolabile property. The aqueous extract from isolate LE 96/22 was also partially purified by anion exchange chromatography and fraction V exhibited high inhibitory activity on the in vitromycelial growth of C. sublineolum, while the multiplication of X. axonopodispv. passifloraewas inhibited by fractions IV, V and VII. Thus, L. edodesisolates were shown to produce compounds exhibiting antifungal and antibacterial activities against phytopathogens, which are mainly concentrated in fraction V.

In vitro effect of substrate, temperature and photoperiod on Phakopsora pachyrhizi urediniospore germination and germ tube growth

In vitro experiments were conducted to assess the effects of substrate, temperature and time of exposure to temperature and photoperiod on P. pachyrhizi uredospore germination and germ tube growth. The following substrates were tested: water-agar and soybean leaf extract-agar at different leaf concentrations (0.5, 1.0, 2.0 and 4.0 g of leaves and 15g agar/L water), temperatures (10, 15, 20, 25, 30, and 35oC) and times of exposure (1, 2, 3, 4, 5, 6, 7, and 8 hours) to temperature and 12 different photoperiods. The highest germination and germ tube length was found for the soybean leaf extract agar. Maximum P. pachyrhizi uredospore germination was obtained at 21.8 and 22.3°C, and maximum germ tube growth at 21.4 and 22.1°C. The maximum uredospore germination was found at 6.4 hours exposure, while the maximum germ tube length was obtained at 7.7 h exposure. Regarding photoperiod, the maximum spore germination and the maximum uredospore germ tube length were found in the dark. Neither spore germination nor uredospore germ tube growth was completely inhibited by the exposure to continuous light.

Uso do solo e análise temporal da ocorrência de vegetação natural na fazenda experimental Edgardia, em Botucatu-SP

Foram mapeados o uso do solo e as alterações das áreas de vegetação natural da Fazenda Experimental Edgardia, localizada em região de Cuesta no município de Botucatu-SP, em dois períodos (1978 e 1997), com o auxílio do sistema de informações geográficas ILWIS v.2.2 para Windows, de fotografia aérea e de imagens dos satélites Spot e Landsat-5. Cruzaram-se as informações de ocorrência da vegetação natural nas duas épocas, derivando-se um mapa temático que permitiu verificar a variação temporal das áreas dos fragmentos florestais, assim como foram observadas as associações da vegetação natural com a declividade e as unidades de solo. Analisado o intervalo de 19 anos, foram detectadas uma regeneração significativa de áreas de Floresta Estacional Semidecidual, na frente da Cuesta, em unidades de Neossolo Litólico, e uma pequena regeneração da tipologia cerradão, na depressão periférica, onde ocorrem solos de textura arenosa.

Fitossociologia e estrutura diamétrica da mata de galeria do Taquara, na reserva ecológica do IBGE, DF

(Florística e estrutura na mata do Taquara, Reserva Ecológica do IBGE, DF). As matas de Galeria, apesar de legalmente protegidas, vêm sendo sistematicamente substituídas visando a outras finalidades. As árvores (DAP³ 5 cm) na mata de Galeria do córrego do Taquara, na Reserva Ecológica do IBGE, no Distrito Federal, foram amostradas pelo método de quadrantes, com 250 pontos, dispostos em linhas estabelecidas ao longo do comprimento do córrego, desde as margens até os limites entre a mata e o cerrado. A amostragem de 1.000 árvores resultou na composição florística, na fitossociologia e na distribuição dos diâmetros dos troncos. No total foram amostradas 110 espécies de 49 famílias. O índice de diversidade de Shannon & Wiener foi estimado em 4,25 nats.ind-1. As famílias mais importantes foram: Leguminosae (lato sensu), Rubiaceae, Anacardiaceae, Euphorbiaceae e Sapindaceae, enquanto as espécies principais foram: Tapirira guianensis, Copaifera langsdorffii, Lamanonia ternata, Anadenanthera colubrina var. cebil, Piptocarpha macropoda, Alibertia macrophylla, Matayba guianensis, Pera glabrata, Guettarda viburnioides e Ixora warmingii. As estimativas da densidade e da área basal total foram de 1.573 árvores.ha-1, e 38,5 m².ha-1 respectivamente. A distribuição diamétrica indicou uma curva tendendo para o `J' invertido, evidenciando os baixos níveis de distúrbios ocorridos na mata. Uma comparação florística conduzida entre 21 matas de Galeria no Distrito Federal apontou a mata do Taquara como uma área rica, com 110 (29,1%) das 378 espécies listadas e similaridade de Sørensen variando entre 0,34 e 0,80, nas matas incluídas.

Dinâmicas de regeneração, degeneração e desmatamento da vegetação provocadas por fatores climáticos e geomorfológicos: uma análise geoecológica através de SIG

Este trabalho teve como objetivo analisar a influência de fatores climáticos (insolação e precipitação anual) e geomorfológicos (declividade) na dinâmica das transformações da cobertura vegetal arbórea e no uso do solo. A área de pesquisa é a bacia hidrográfica do rio Paquequer, região serrana do Estado do Rio de Janeiro, bacia representativa de Mata Atlântica. Foram utilizadas as interpretações da cobertura vegetal dos anos de 1976 e 1996, obtidas, respectivamente, através de fotografias aéreas e imagem de satélite SPOT-3 XS/PAN. Os dados de relevo e de insolação (aspect) foram derivados do Projeto Teresópolis (UERJ/IBGE) e os de pluviosidade, da CPRM. A análise da dinâmica da cobertura vegetal arbórea em 20 anos visou avaliar os fatores físicos condicionantes de processos de regeneração (inicial e avançada), degeneração e de desmatamento. Essas categorias de informação foram cruzadas com os fatores de declividade, insolação e precipitação anual. A análise espacial foi realizada com o uso de Sistema de Informação Geográfica (SIG), utilizando-se o software ArcGIS 9.0. Enquanto a regeneração inicial ocorre indistintamente dos fatores abióticos, sugere-se que a regeneração avançada seja um processo mais seletivo, ou melhor, preferencialmente em encostas com menor insolação e mais úmidas. De forma contrária, o desmatamento da vegetação para uso antrópico tende a ser mais intenso nas áreas favoráveis ao uso: baixa declividade e maior insolação (encostas voltadas para o norte).

Valuuttasuojaus kansainvälisissä osakeportfolioissa - eurosijoittajan näkökulma

Tämän tutkimuksen tarkoituksena on selvittää eurosijoittajan näkökulmasta tehokkain strategia kansainvälisen osakeportfolion valuuttariskin suojaamiseen. Tutkimuksessa tarkastellaan akateemisissa tutkimuksissa eniten käsiteltyjä valuuttasuojausstrategioita ja pyritään tunnistamaan niistä tieteellisesti valideimmat metodit tutkimuksen empiiriseen osioon. Valuuttasuojauksen tehokkuutta tullaan mittaamaan niin riskin kuin tuoton näkökulmista. Empiirisessä osiossa käytetään aineistona kahdeksan eri valtion osakemarkkinaindeksien ja valuuttojen spot- ja termiinikurssien kuukausittaisia tuottoja niin, että tarkastelu tapahtuu euroalueen sijoittajan näkökulmasta. Tutkimuksen aikaväli on 31.12.2004 - 31.12.2010. Tutkimuksessa päädyttiin suosittamaan 50 % valuuttariskin suojausastetta eurosijoittajan näkökulmasta. Kyseinen strategia alensi parhaiten kansainvälisen sijoittajan portfolion riskiä tutkitulla aikavälillä, eikä strategia myöskään heikentänyt merkittävästi portfolion tuottoa. Absoluuttisella kumulatiivisella tuotolla mitattuna suojaamaton osakeportfolio oli tutkimuksen aikavälillä paras, johtuen pääosin vuoden 2010 eurokriisistä, jonka vuoksi euro heikentyi voimakkaasti muita valuuttoja vastaan. Ennen kriisiä ”selektiivinen” valuuttasuojausstrategia oli tuotoilla (sekä kumulatiivinen että riskikorjattu) mitattuna paras.

Spectrometrical Monitoring of Laser Sintering Process of Ceramic Material

This thesis is done as a part of project called FuncMama that is a project between Technical Research Centre of Finland (VTT), Oulu University (OY), Lappeenranta University of Technology (LUT) and Finnish industrial partners. Main goal of the project is to manufacture electric and mechanical components from mixed materials using laser sintering. Aim of this study was to create laser sintered pieces from ceramic material and monitor the sintering event by using spectrometer. Spectrometer is a device which is capable to record intensity of different wavelengths in relation with time. In this study the monitoring of laser sintering was captured with the equipment which consists of Ocean Optics spectrometer, optical fiber and optical lens (detector head). Light from the sintering process hit first to the lens system which guides the light in to the optical fibre. Optical fibre transmits the light from the sintering process to the spectrometer where wavelengths intensity level information is detected. The optical lens of the spectrometer was rigidly set and did not move along with the laser beam. Data which was collected with spectrometer from the laser sintering process was converted with Excel spreadsheet program for result’s evaluation. Laser equipment used was IPG Photonics pulse fibre laser. Laser parameters were kept mainly constant during experimental part and only sintering speed was changed. That way it was possible to find differences in the monitoring results without fear of too many parameters mixing together and affecting to the conclusions. Parts which were sintered had one layer and size of 5 x 5 mm. Material was CT2000 – tape manufactured by Heraeus which was later on post processed to powder. Monitoring of different sintering speeds was tested by using CT2000 reference powder. Moreover tests how different materials effect to the process monitoring were done by adding foreign powder Du Pont 951 which had suffered in re-grinding and which was more reactive than CT2000. By adding foreign material it simulates situation where two materials are accidently mixed together and it was studied if that can be seen with the spectrometer. It was concluded in this study that with the spectrometer it is possible to detect changes between different laser sintering speeds. When the sintering speed is lowered the intensity level of light is higher from the process. This is a result of higher temperature at the sintering spot and that can be noticed with the spectrometer. That indicates it could be possible to use spectrometer as a tool for process observation and support the idea of having system that can help setting up the process parameter window. Also important conclusion was how well the adding of foreign material could be seen with the spectrometer. When second material was added a significant intensity level raise could be noticed in that part where foreign material was mixed. That indicates it is possible to see if there are any variations in the material or if there are more materials mixed together. Spectrometric monitoring of laser sintering could be useful tool for process window observation and temperature controlling of the sintering process. For example if the process window for specific material is experimentally determined to get wanted properties and satisfying sintering speed. It is possible if the data is constantly recorded that the results can show faults in the part texture between layers. Changes between the monitoring data and the experimentally determined values can then indicate changes in the material being generated by material faults or by wrong process parameters. The results of this study show that spectrometer could be one possible tool for monitoring. But to get in that point where this all can be made possible much more researching is needed.

Uso do solo na zona ripária de bacias agrícolas de pequeno a médio porte

As zonas ripárias situam-se às margens dos sistemas de drenagens de águas superficiais, afetando processos hidrológicos. O Código Florestal Brasileiro estabelece um afastamento mínimo ao longo dos cursos de águas, considerado como área de preservação permanente. Este trabalho objetivou determinar a distribuição do uso do solo em bacias agrícolas com várias dimensões para diferentes afastamentos em relação ao sistema de drenagem de águas superficiais. A metodologia utilizada compreendeu o uso de imagens do satélite SPOT-5, para classificação do uso de solo em seis bacias com áreas variando de 14 a 600 km². A precisão da classificação foi determinada pela acuracidade e o nível de acerto, determinado pelo coeficiente Kappa. A partir do sistema de drenagem foram traçadas linhas paralelas aos cursos de águas, denominados buffers, com afastamento das margens de 20, 30, 50, 100 e 200 m. Em cada buffer foi determinada a distribuição da ocupação do uso do solo. Os valores obtidos com a classificação indicaram acerto com coeficiente Kappa médio de 0,96. Os temas classificados em todas as imagens apresentaram boa acuracidade, com valores maiores que 96%. Os resultados apontaram que o uso da terra predominante em todas as bacias é a mata nativa com valores médios de 46,8%, seguida de culturas agrícolas com 24,7% e pastagens com 21,7%. As áreas de matas nativas apresentavam tendência de redução à medida que se afastavam dos cursos de água, enquanto os reflorestamentos tendiam a aumentar o percentual da área ocupada com o afastamento das margens dos rios.

Análise morfométrica e socioambiental de uma bacia hidrográfica Amazônica, Carlinda, MT

Estudos morfométricos e socioambientais foram realizados na bacia hidrográfica do rio Monte Sinai, em Carlinda, MT, visando à criação de subsídios para a sua sustentabilidade ambiental. Para tanto, foram utilizados dados SRTM 90 m, reamostrados para 30 m, para a geração do modelo digital de elevação e dados SPOT (10 m), para a avaliação do uso e cobertura da terra, através de técnicas de SIG. Além disso, foram feitas entrevistas semiestruturadas com os moradores locais e visitas de campo. Os resultados apontaram que a bacia apresenta padrão dentrítico de quarta ordem. A razão altimétrica, declividade, densidade de drenagem e fator de forma indicaram forte controle estrutural da drenagem da bacia hidrográfica. Entretanto, o atual uso e cobertura da terra, dominada por pastagens e mata ciliar degradada, favorecem os processos erosivos e, consequentemente, a perda da ferlitiladade do solo e o assoreamento dos cursos d'água. Foram apontados indicadores de degradação, assim como estratégias de manejo adequadas à melhoria ambiental que venham contribuir e garantir a sustentabilidade ambiental da bacia.